Wyniki wyszukiwania: mout

Sortowanie

Liczymy pasujące modele…

P
Printablesvivacello

Mouth Guard Case (Print in Place)

Mouth Guard Print In Place. For those who want a new case with a hinge to hold your mouth guards. I made this in PLA.

Pobrania
969
Polubienia
46
Ocena
4,6
P
Printablesdragonfly

Guiro - the whole Percussion frog with support only in the mouth

Percussion Frog 90% infill, WITH SUPPORT, only in the mouth In Prusa Slicer, you can now easily add support manually with the brush. But it's still not that easy. So here are my .3mf-files (for the MK4). Two versions: Original size and…

Pobrania
451
Polubienia
43
Ocena
5
P
PrintablesKiwibloke

Wide Mouth Funnel

Why?: All my funnels have narrow throats and do not have any grooves to allow air to easily escape the bottle as it fills. This is especially noticeable if you are using filters with viscous liquids. Due to having narrow throats they also…

Pobrania
354
Polubienia
24
Ocena
5
P
Printablesgillis

Tuba Mouthpiece

I have printed both in PLA and PETG and both seem to work well according to my tuba-playing friend 100% infill See also...

Pobrania
328
Polubienia
14
Ocena
0
P
Printablesslachtys

Stormtrooper mouth tip for Hookah

Another stolen shisha mouth tip from thingiverse.com.

Pobrania
209
Polubienia
23
Ocena
0
P
Printablesanimatorgeek

Mouth-blown airbrush lid for a Gerber baby food jar

Update June 13th 2023: Significantly improved functionality. Do you have old Gerber baby food jars lying around? Do you wish you had an airbrush but don't want to spend the money? Turn two problems plus a 3D printer into a solution! This…

Pobrania
157
Polubienia
74
Ocena
5
P
PrintablesDave Carley

Print-in-Place Nutcracker Ornament with Movable Mouth

💂 Introducing the Print-in-Place Nutcracker with Movable Mouth - a festive 3D printing delight that combines the magic of the holidays with the ingenuity of modern technology! 🎁 Prints from head to feet, ready to print without…

Pobrania
154
Polubienia
24
Ocena
5
P
PrintablesTeo_211

Plymouth Barracuda 1970 Wall Art

Plymouth Barracuda 1970 Wall Art Silhouette model. Adjustable size. I accept model suggestions.

Pobrania
120
Polubienia
45
Ocena
5
P
PrintablesRxRick

Kratky Hydroponics cube holder for Regular mouth mason jar

The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…

Pobrania
107
Polubienia
37
Ocena
5
P
Printablesthreedjd

Wide mouth jar lid with degassing valve (Mason Jar)

Degassing valves: https://www.amazon.com/dp/B08GP69TJM/

Pobrania
99
Polubienia
15
Ocena
0
P
Printablesjoelbarrette

Mason Jar Widemouth Lid Drying Rack

I always have tons of Mason jar lids lying in a pile and not drying properly so I designed this rack since I didn't like how long this one would take to print: https://www.printables.com/model/370342-mason-jar-lid-drying-rack A simple…

Pobrania
98
Polubienia
20
Ocena
5
P
Printableszimo

Magnetic Mouthguard Case

Use 5x3mm magnets , make sure they are oriented the right way. Use of glue is recommended, as the printhead metal parts can attract the magnets. To place them, put a color change in the layer that covers the holes for the magnets. You can…

Pobrania
79
Polubienia
4
Ocena
4
P
PrintablesGracro

A drip tray for a 1L Listerine mouthwash bottle

My chosen brand of mouthwash gets sticky and messy, leaking all over my bathroom cupboard. So I made this drip tray to keep things a bit more tidy. The design is supposed to follow the shape of the bottle itself, and the nubs inside are…

Pobrania
68
Polubienia
14
Ocena
0
P
Printables3DFW

HydroFlask Paracord Handle Ring – Wide Mouth Bottle Attachment

This 3D printable ring fits securely around a Hydro Flask wide mouth bottle and provides a built-in loop for attaching a paracord handle. It's a simple, rugged solution for carrying your bottle on hikes, at the gym, or just around town —…

Pobrania
31
Polubienia
10
Ocena
5
P
Printableswerz 99

Mouting Plate for 125 mm Lathechuck

Model of a backplate for a Sanoui K11 - 125 Lathechuck on a HBM Norton Profi Lathe. Purpose is to check the fit on the spindle nose and to fabricate a fitting mounting plate out of cast iron and to find out the short taper dimensions. It…

Pobrania
20
Polubienia
2
Ocena
0
P
PrintablesMrtvejMagor

Shisha mouthpiece - One Piece (color swap)

Naústek na vodní dýmku s motivem One Piece- Shisha mouthpiece

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesY Ibrahim

The Prusa Mouth Organ - A printable harmonica w/ Carry Case

Overview A fully printable, fully functional printable harmonica in a simple 3-piece form factor that clips together - no fasteners needed! The design features swappable reed plates which set the playable notes. The attached reed plate…

Pobrania
5123
Polubienia
979
Ocena
3,83
P
PrintablesMucusLaser

Trumpet Mouthpiece 7C

Here's a standard 7C trumpet mouthpiece! It works pretty well. It's obvious when playing that it's not the same as a metal one, but it gets the job done. Print Settings Printer Brand: Creality Printer: CR-10 Rafts: Doesn't Matter…

Pobrania
3565
Polubienia
113
Ocena
4,94
P
Printablesraptor_3d

Aztec death whistle with mouthpiece

made the mouthpiece so it was easier to blow into it (tip: put two fingers in the hole as deep as you can in the bottom of the whistle, it will sound better.)

Pobrania
2455
Polubienia
68
Ocena
4,83

Wide mouth jar lid (Mason Jar)

This should fit any wide mouth canning jar. If printed well, and well tightened, these lids are almost watertight (actually, they form a tighter seal than the commercially sold counterparts but not air tight. These are suitable for use in…

Pobrania
2401
Polubienia
171
Ocena
4,83
P
PrintablesPeter Farell

Large Mouth Bass

Large Mouth Bass - Fixed (1/13/23)

Pobrania
1744
Polubienia
126
Ocena
5
P
Printablesmrusk

Windy City Woodwinds Series 56 Saxophone Mouthpieces

When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 56”. I have…

Pobrania
1675
Polubienia
77
Ocena
5

Trombone Mouthpieces based on Bach Sizes 7C, 11C, 5G

These mouthpieces were designed in Fusion 360 taking inspiration from the profiles provided by the Wedge Mouthpiece website (https://wedgemouthpiece.com/all-trombone-mouthpieces). The mouthpiece files are named according to their names on…

Pobrania
1525
Polubienia
124
Ocena
5
P
Printablesmrusk

Windy City Woodwinds Series 64 Saxophone Mouthpieces

When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 64”. I have…

Pobrania
1314
Polubienia
76
Ocena
5
P
Printablesmrusk

Windy City Woodwinds Series 72 Saxophone Mouthpieces

When closing their operative business back in June 2024, Windy City Woodwinds have released their designs to the public and asked for broad distribution, which I am happy to do here on Printables. This is the “Series 72”. I have…

Pobrania
1299
Polubienia
71
Ocena
5
P
PrintablesDave Yeagly

Clarinet Mouthpiece

Mouthpiece is playable with a little sanding to the surface that mates with the reed. No cork needed as the flexible bulb keeps the mouthpiece seated and secure within the clarinet. Opening is 1.28mm (0.05 in). Minimal supports needed.…

Pobrania
1284
Polubienia
52
Ocena
5
P
Printablesskola28

Articulated Shark with supports added to the roof of the mouth

No matter what I tried, PrusaSlicer 2.4.2 insisted on unsupported bridges for the roof of the sharks mouth. I added a cylinder support enforcer to the unsupported section, and after printing, simply removed the supports.

Pobrania
1255
Polubienia
140
Ocena
4,5
P
Printablesrmccown

Wide mouth mason jar lid

A stronger wide-mouth mason lid jar lid than I was able to find. Print Settings Printer: Qidi X-One 2 Rafts: No Supports: Yes Resolution: .016 Infill: 100 Filament: IIID PLA Grey Category: Kitchen & Dining

Pobrania
1201
Polubienia
124
Ocena
5
P
PrintablesAnkhadia

Wide Mouth Mason Jar Candy Machine

Requires: Wide Mouth Canning Jar (Mason Jar) with Lid Ring M4 x 20mm If you print the Back Hidden Screw file make sure you glue the front on first. Then put the knob on with the screw. Then glue that back. 04.21.2024 update. Added a new…

Pobrania
1160
Polubienia
365
Ocena
5
P
PrintablesDeMamba Prints

Mouthless Expression mask

MY PRINT SETTINGS Ender 3 compatible, Printed on ender 5 plus CURA SETTINGS 0.2mm layer height 0.6mm nozzle yes supports, 5% density, 45 overhang angle yes adhesion, Raft 15 infill gyroid infill pattern

Pobrania
1140
Polubienia
219
Ocena
5
P
PrintablesMeshMaster

Mouth Bellows v2 - Fire Building Nozzle

The mouth bellows are a simple nozzle you blow through that directs your breath through a narrow channel, speeding it up. This increased velocity of your air stream leverages the venturi effect to pull additional air with it, into the…

Pobrania
883
Polubienia
378
Ocena
5
P
Printablesdrawks

Hinged Retainer/Invisalign/Denture/Mouthguard Case

After trying some of the other options I'd seen online I wasn't particularly happy with the ergonomics of any of them and I definitely didn't like using bolts or dowels to make a simple hinge. So I sat down and taught myself enough Fusion…

Pobrania
850
Polubienia
73
Ocena
4,75
P
PrintablesGauthier

Trumpet 3C mouthpiece

The foot is to print with the mouthpiece rim upwards, to avoid a sharp edge against the lips. Also nice to have for the acetone bath. It breaks away. Fully functional mouthpiece! Here is a stupidly deep version of it.

Pobrania
837
Polubienia
59
Ocena
5
P
Printablesfred-o-matic

Tuba Mouthpiece

This tuba mouthpiece works - sort of - like a real one. Not to be compared with a real one, but in case of a tuba emergency you will be glad to have it. I suggest you sand it a bit after printing to smooth it out.

Pobrania
835
Polubienia
43
Ocena
5
P
PrintablesJack L

Trumpet mouthpiece 7C

7C sized trumpet mouthpiece, roughly modeled after a Bach 7C size mouthpiece.

Pobrania
784
Polubienia
47
Ocena
4,67
P
PrintablesCamMan

3/4" PVC Flute Recorder Mouthpiece

Use ¾" PVC pipe schedule 40 to make your own flutes. I printed mine on an Ender 3 V2. Slight scaling may be necessary for other printers. Print with the blow in end upward and the wider pipe insert part on the base plate. You can print…

Pobrania
784
Polubienia
85
Ocena
5
P
PrintablesCVABuck
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
715
Polubienia
167
Ocena
0
P
PrintablesH&B United

Train Whistle Mouthpiece

This mouthpiece fits Dragon Mountain Design's Train Whistle: https://www.printables.com/model/24997-train-whistle My toddler had difficulties blowing the original flat mouthpiece, so I added a short tube that makes it easier for him to…

Pobrania
698
Polubienia
78
Ocena
5
P
PrintablesMoe3D

Oni Mask No. 06 | Ripped Mouth with patches

Model No. 06, Oni Mask with ripped mouth that is patched. Free hand sculpted by me in Nomad Sculpt. Best printed in Resin, ABS Like if you have for additional strength, and upside down.

Pobrania
695
Polubienia
106
Ocena
0
P
PrintablesCisco3D

Bag Screw Cap with clip - REMIX- Bigger Mouth

A simple remix within Prusa Slicer The model has increased to 150%, but the clip "arm" remains the same length.

Pobrania
693
Polubienia
131
Ocena
4,86

Trombone Mouthpiece

Hi, I wanted to brag about making a copy of my mouthpiece. I took off the dimensions, but I made a few modifications during the design process, e.g. ergonomic 😃 place for the index finger and enlarged culvert. PLA material, 100% filling,…

Pobrania
688
Polubienia
48
Ocena
5
P
PrintablesD3vil.Design

Candy Dispenser for Big Mouth Mason Jar

This is a remix of the original model from Carl Belcher Link below… THANK YOU. Note: the back had my name ( the model uploaded here is plain, you can customize it with your name ) Here’s a Quick Video showing the print and how to fit it…

Pobrania
680
Polubienia
131
Ocena
4,6
P
PrintablesmozWORLD

Chicken Feeder for Wide Mouth Ball Jar

Feed your chickens with this Wide Mouth Ball Jar Chicken Feeder.

Pobrania
640
Polubienia
76
Ocena
5
P
PrintablesJP Brichta

Alto Saxophone Mouthpiece

This is an alto saxophone mouthpiece. I remixed an existing model and widened the tube that connects it to the saxophone neck. I found the original model was too tight for the neck on my saxophone. I hope you like it.

Pobrania
635
Polubienia
39
Ocena
4
P
PrintablesSchaffer.la

Wide mouth Jar Funnel

A screw-on funnel for standard wide mouth glass jars. Print funnel end on build plate, no support needed. Print in PET-G at 0.2mm

Pobrania
633
Polubienia
91
Ocena
5
P
Printablesjdtzn

Desert Blush (Tenor Saxophone Mouthpiece)

This is the Desert Blush tenor saxophone mouthpiece. Tip opening is drawn at 0.105" (2.67mm.) Play Tests To see previous play tests, see this playlist. Baffle Shape To view the baffle shape, view the second .stl file (named “__half”). It…

Pobrania
628
Polubienia
43
Ocena
5

Hanging Wide-Mouth Mason Jar Fly Trap

No Supports! Added more holes and increased size. Also added center cone to improve results.

Pobrania
601
Polubienia
171
Ocena
5

Regular mouth jar lid (Mason Jar)

This should fit any standard canning jar. If printed well, and well tightened, these lids are almost water tight (actually, they form a tighter seal than the commercially sold counterparts linked above), but not air tight. These are…

Pobrania
596
Polubienia
86
Ocena
5
P
Printablessale723

NEMA 17 holder/mout

This is a 3D model of a NEMA 17 holder/mount. This project does not contain a model of the stepper motor NEMA 17, that part can be found in my other projects. This project contains .ipt and .stl files. The project was drawn in Autodesk…

Pobrania
590
Polubienia
24
Ocena
3,5
P
PrintablesMH

Trumpet mouthpiece box

This small box is for the storage of a single trumpet mouthpiece. I printed those with PETG and PLA. The thread worked well for me with 0.4 and 0.6 mm nozzles and a layer high between 0.1 and 0.2mm. UPDATE 19.02.2022 I updated both parts.…

Pobrania
568
Polubienia
83
Ocena
5
P
Printablessj3Dprints

Mouth Chip Clip from 3D Scan of Teeth

This chip clip design uses an actual 3D scan of a set of teeth for the jaws. The clip assembly is 100% 3D printed, the spring clip needs to be printed twice (1 for each side). The spring clips slide into the grooves on the jaw and roof,…

Pobrania
564
Polubienia
80
Ocena
0
P
Printablesricrom

QIDI Q2 Improved cooling fan - new housing / duct for 5015 fan (regular and wide mouth)

UPDATE 29/01/2026 Added STEP files and updated the "Wide mouth with fin" model with 2 fillets. UPDATE 06/11/2025 Added models to fit 5015 fans with wide mouth, like the stock one. One model is basically as the stock housing but with…

Pobrania
562
Polubienia
115
Ocena
0
P
PrintablesBlake Unsell

Mason Jar Lid (standard and wide mouth sizes)

This is the new and improved version of my previous mason jar lids that I made. This version needs NO supports, and it uses silicon seals that I bought off of amazon. Please reach out to me if you have any question and enjoy the print!…

Pobrania
559
Polubienia
114
Ocena
5
P
Printablesbjamdesign

Cat Grass - Growing Kit - Standard and Wide Mouth Canning Jar

This is a set of models to grow cat grass hydroponically in a standard or wide mouth canning jar. Want to keep your new cat grass upright, despite your cat's best efforts? Check out this companion print - Base for a Canning Jar…

Pobrania
533
Polubienia
196
Ocena
4,75
P
Printablesfedefricoo

Denis Wick SM4XR - Euphonium mouthpiece

Unofficial printable model of a Denis Wick SM4XR (Steven Mead series) for euphonium, with a large shank. To achieve the best print quality, place the mouthpiece on the print bed with the shank facing down. Utilize support material and a 1…

Pobrania
524
Polubienia
11
Ocena
5
P
Printablesscooter_magavin

Mason jar fruit fly trap (wide mouth and regular mouth, for both quart and half pint jars)

My wife wanted a mason jar fruit fly trap, so I made this. I made it for both wide mouth and regular mouth jars, both quart and half pint jars. Make a simple but powerful fruit fly trap by putting a small amount of apple cider vinegar in…

Pobrania
488
Polubienia
73
Ocena
5
P
PrintablesAustin Triggs

Mason Jar Lid Bank (Regular Mouth)

Transform any regular mouth mason jar into a convenient piggy bank with these 3D printable lids. Perfect for saving spare change, setting aside money for a vacation, or a swear jar! Included Options: Built-in Bank Lid: A lid with an…

Pobrania
478
Polubienia
117
Ocena
5
P
Printablesthall72
Pobrania
478
Polubienia
79
Ocena
4
P
PrintablesPeter Farell

small mouth mason jar lid

This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/9vHC7OP7r4G Category: 3D Printing

Pobrania
465
Polubienia
49
Ocena
5

Trumpet mouthpiece

I designed this trumpet mouthpiece with a bell cup shape. It actually has a easy to sound design and great seal. Great for lip practice.

Pobrania
459
Polubienia
61
Ocena
4,67
P
Printables3DFiguresGalore

Smallmouth Bass – Standalone Fish Figure

This standalone Smallmouth Bass statue features a sturdy, well-proportioned body with textured scales and realistic fins. No base is included, making it perfect for desktop displays, hobby collections, or freshwater-themed decor. Prints…

Pobrania
458
Polubienia
36
Ocena
0
P
PrintablesRainer Backes

Windy City Tenor Saxophone Mouthpiece Series 64 - Modification

Testing the original WCW Mouthpiece, I was exited by the sound and easy playability of the 64 series. But there was one problem: to tune the sax I had to pull the mouthpiece so far that it nearly dropped of the s-bow. So I designed an…

Pobrania
456
Polubienia
13
Ocena
2
P
Printablesscooter_magavin

Canning jar lid and ring storage regular and wide mouth

I created a storage rack for our regular and wide mouth canning/mason jar lids and rings. I made them in two heights, 80mm and 120mm tall. Both heights will fit rings and lids.

Pobrania
451
Polubienia
103
Ocena
5
P
PrintablesNarlyB

Mason Jar Lid for Sprouts - Wide Mouth

Simple Lid for wide mouth mason jar for growing sprouts.

Pobrania
447
Polubienia
50
Ocena
5
P
PrintablesCisco3D

PAC-Man Toy w/ moving mouth

Just like in the game this PAC-Man opens and close the mouth as it moves along, thanks to the mechanism inside. An Open Source Project - Fusion360 File Available! Print instructions Had to create two files since PrusaSlicer does not…

Pobrania
438
Polubienia
79
Ocena
4
P
PrintablesTim O'Brien

Brass Mouthpiece Generator

A customizable parameterized mouthpiece design.. print your perfect mouthpiece. First step: Go research mouthpiece design a little. Here's some great sites: BestBrass has some phenomenal comparison charts, (righthand side) cross sections,…

Pobrania
427
Polubienia
51
Ocena
5
P
PrintablesRUMcajz

Dragon's Mouth - LED tealight Holder

LED tealight holder in the shape of a dragon's head, the tealight is placed directly in the mouth. Fits standard size (max - 37 mm diameter) tealights , but you can make it even bigger. Warning! For the default model size, only a tealight…

Pobrania
426
Polubienia
191
Ocena
0
P
PrintablesÖE

Miele vacuum cleaner mouthpiece hanger

Wall hanger for the mouthpiece (with tube) of a Miele vacuum cleaner. I got tired of having the mouthpiece of the vacuum cleaner standing loose inside the cupboard. This hanger makes it easy to hang it onto the door. Update 2021-10-06:…

Pobrania
424
Polubienia
78
Ocena
5
P
PrintablesRott3D

Predator mouth mask

Scale it on your face and let your fantasy begin. Enjoy

Pobrania
424
Polubienia
76
Ocena
5
P
Printableslu po

french horn mouthpiece

this is an simple french horn mouthpiece i've just made. its made from PLA, but ABS will work better because it's less brittle i think.

Pobrania
417
Polubienia
28
Ocena
5
P
PrintablesNottingham82

screw on bee watering tray for wide or standard mouth mason jar

This is a bee waterer remix which uses as screw on wide mouth mason jar for the water container. Edit 05/17/2026: V2 adds standard threads so you can use either a standard or wide mouth mason jar. If using standard don't screw all the way…

Pobrania
405
Polubienia
46
Ocena
5
P
PrintablesJoe

Just a simple wide mouth funnel

Inside diameter of the funnel's neck is approximately 50mm, while the top of the funnel is around 116mm dia.

Pobrania
400
Polubienia
22
Ocena
4,67

Pico 4 Babble Mouth Tracker Mount

Project Babble is an open source mouth tracking solution for VR using simple off the shelf cameras. This mount creates a gopro joint that allows for other cameras to be mounted in front of the user's face. Babble Repo:…

Pobrania
396
Polubienia
23
Ocena
5
P
PrintablesPetr Bojar

Sonoff zigbee bridge wall mout

Small holder to mount your Sonoff zigbee brindge on wall or another place. It is possible to use some of the prepared holes having a diameter of 2 mm for mounting. The second option is, for example, the use of double-sided adhesive tape…

Pobrania
384
Polubienia
48
Ocena
4,86
P
Printablestomasmcz

Trumpet Mouthpiece

A simple trumpet moutpiece, roughly based on an umarked C5 model. Can be printed standing without supports.

Pobrania
384
Polubienia
23
Ocena
4
P
PrintablesAustin Dennis

AnkerMake M5 "Mouth Guard" Cooler

This is a stock drop in alternative (I'm hesitate to say upgrade) for the stock fan ducts on the AnkerMake M5. The aim of this was to mor evenly distribute airflow around the nozzle and I think we accomplished that here. I don't think it…

Pobrania
380
Polubienia
70
Ocena
5
P
PrintablesmozWORLD

Fruit Fly Trap for Wide Mouth Mason Ball Jar or 1.89L (~1.5in) Bottle

update: I've made the license commercially available to you. I like to pay it forward as I have made my share of money off of free models. Anything that can potentially make someone's life or health better, I will release as commercially…

Pobrania
364
Polubienia
45
Ocena
5
P
PrintablesNils

hygiene mouthpiece for shisha hookah

Throw away hygiene mouthpiece for shisha hoses.

Pobrania
362
Polubienia
21
Ocena
0
P
PrintablesNottingham82

Keurig K-Cup Extractor Recycler for wide mouth mason jar

I have tried all the coffee extractors on thingiverse. All ultimately broke except the "Yes another coffee extractor but stronger" by buzzerco. The problem was the coffee often gets stuck because of the cross beams. I added some more…

Pobrania
359
Polubienia
70
Ocena
5
P
PrintablesAlessioT20

Pacman Remix with Thicker Mouth Roof

I really like the original model, but the roof of the pacman mouth was very thin and it delaminated, so I designed it from scratch trying to be as precise as possible with the original model, fixing the mouth roof. This is my first model…

Pobrania
349
Polubienia
25
Ocena
4,83
P
Printablesjleslie48

Christine, the evil 1958 plymouth fury

this was actually a redo and combination of a few models all of which were incomplete and/or broken. I've also added my spinner wheel design.

Pobrania
345
Polubienia
21
Ocena
0
P
PrintablesMattM

Tin Whistle in D - Mouthpieces

My dad plays the irish Tin Whistle in a folk band, and his mouthpiece died a while ago, so I offered to print new ones for him… And ended up reading a ton of books & scientific papers on the acoustics of flutes, so there are 3 variations…

Pobrania
343
Polubienia
28
Ocena
4,5
P
Printableschobotx

Hookah Mouth Piece

Simple Hookah Mouth Piece Print Settings Printer Brand: Creality Printer: Ender 5 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Category: Other

Pobrania
341
Polubienia
13
Ocena
5
P
Printablestiebex

Bach 1c Trumpet Mouthpiece

Generated using VennCad, Model is oriented to allow for best performance. Use tree supports (auto) at 20 deg threshold angle, on build plate only and support crit regions only. Add 3 negative cylinders into the slicer to remove the text…

Pobrania
328
Polubienia
18
Ocena
4

Trumpet mouthpiece double exit

Mouthpiece with a double exit for two trumpet. Based on a Bach 1C profile. Separation is put as close as possible to the mouth. After testing by a trumpet player, don't expect to play 2 notes at the same time. May be harmonics but not…

Pobrania
325
Polubienia
15
Ocena
3
P
PrintablesRadovan Moravec

Mouth Opener

Mouth Opener for Dental Hygiene. Can be scaled down or up to fit any mouth. NO SUPPORTS

Pobrania
324
Polubienia
29
Ocena
5
P
PrintablesCapsel22

VKB NXT Gladiator desk mouting plate

This is just a plate which can be fitted to the original clamp and used with your VKB devices. Tested on NXT Gladiator with and without Omni stick. The plate has groves of 1.5mm which you can use to attach to the clamp using few cable…

Pobrania
316
Polubienia
27
Ocena
5
P
PrintablesScootercommuter

Wide Mouth Mason Jar Ring

This is a Jar Ring for a wide mouth mason jar. It's a remix of AlexEnglish's Canning Jar Lid (http://www.thingiverse.com/thing:19105). I uploaded the Wide Mouth version of his Lid to TinkerCad, and punched a 73mm hole through the center…

Pobrania
314
Polubienia
34
Ocena
5
P
Printablesdimeman

Saxophone mouthpiece stand

This is a saxophone mouthpiece stand. It can store 6 mouthpieces. Four models are available. Soprano sax x6 Alto sax x6 Tenor sax x6 Mix (Ss x2, As x2, Ts x2)

Pobrania
303
Polubienia
31
Ocena
5
P
PrintablesLukeOne

Mighty Vaporizer Mouthpiece

Have fun! UPDATE: Added version 3. Would recommend to print this version. Print Settings Printer: I3 Mega Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 20% Category: Replacement Parts

Pobrania
300
Polubienia
31
Ocena
4
P
PrintablesCornersruns

Wide Mouth Funnel

Funnel with top diameter of 140mm and bottom diameter of 56mm. Can be printed without supports. Originally made to fill bird feeders, but can be used for other purposes. Printed in PETG but should work with any other material. No supports…

Pobrania
297
Polubienia
16
Ocena
5
P
PrintablesChad Allen

Inline Membrane Clarinet Mouthpiece

Inspired by the membrane clarinets created by Nicolas Bras. Designed so everything is inline like a traditional clarinet. Requires the use of o-rings to seal the membrane compartment. O-ring dimensions: Inner Diameter ¾" Outer Diameter…

Pobrania
295
Polubienia
59
Ocena
4,5
P
PrintablesBrenda

Wide Mouth Mason Jar Lid

The STL fits a wide mouth mason jar, but the model is parametric and can probably be resized to fit other jars. It has been optimized for a .6 nozzle with a .84 extrusion width. It prints fine with .3 layers.

Pobrania
293
Polubienia
32
Ocena
5
P
Printablestecnoculebras

Fuji Moutain Japan light box

COMPRAR ILUMINACION AQUI: https://s.click.aliexpress.com/e/_DE4xxNH DESDE AMAZON AQUI: https://amzn.to/3Pb4ToJ ARCHIVOS SVG PDF Y OTROS FORMATOS DISPONIBLES EN MI PATREON: https://www.patreon.com/tecnoculebras VIDEOS EJEMPLOS MONTAJE…

Pobrania
291
Polubienia
136
Ocena
5
P
Printablesthall72
Pobrania
289
Polubienia
49
Ocena
5
P
PrintablesH3dSprint

Cap for clarinet mouthpiece

The original cap was lost, so I have found the clarinet cover of FeKo which I have adjusted to my needs.

Pobrania
288
Polubienia
28
Ocena
5
P
PrintablesSarah R.

Alto Sax Mouthpiece Cover

My 4th grader lost his original saxophone mouthpiece cover, and without knowing what style commercial cap would actually fit his mouthpiece/ligature combo, I decided to print one instead. The model I started with was close, but quite a…

Pobrania
280
Polubienia
22
Ocena
5
P
Printablesbjamdesign

Wide Mouth Canning Jar Band/Ring

A printed replacement of wide mouth canning jar bands/rings (hold canning lids in place). I needed a solid platform to make other threading designs and lid inserts for wide mouth jars. Example custom canning lid: Cat Grass - Growing Kit -…

Pobrania
273
Polubienia
43
Ocena
5
P
PrintablesPieterB

improved trombone mouthpiece customizer

The parameterized mouthpiece by CKirby - now improved. Note that this errors in customizer without a clear message. It does not in openSCAD. Still trying to find out why. What I changed: four outer design shapes: straight, straight with…

Pobrania
272
Polubienia
24
Ocena
5
P
PrintablesRainer Backes

Blowgun Mouthpiece (parametric)

I programmed this mouthpiece inspired by a mouthpiece I have. The big difference is: it is oval, not round. To complete your blowgun, you need a tube. I use aluminium tube with 10mm diameter (1mm wall). you get those in every hardware…

Pobrania
268
Polubienia
18
Ocena
0