49 modeli
Start G-code lengthens the purge line to better remove any filament pieces that may be stuck to the nozzle and places it outside the print area (100x110x100). End G-code presents the completed print more forward at the end of the print to…
The included profile with the Entina 3D Tina2s works fine, for basic models. But it has some stringing and is made to conserve filament. which means it isn't really the best quality. I've gone through all the setting and changed most of…
Tina2 Filament Guide If, like me, you have a Tina2, but you're using a 1kg filament spool, then you have an external spool holder, or an extension of the original one. In this situation I noticed that the extruder sometimes struggles to…
Dieses Teil verhindert, dass die Spindel der Z-Achse wobbelt
Enclosure for the Tina2(S)/ MP Cadet. The door with the window is designed for a 1mm glass/plexiglass. The print is made to be paused and the glass inserted. You can use the template as a guide to cut the glass/plexiglass. PLA doesn't…
Because my second little printer Bresser raptor 3D ( or TINA2 ) has only holder for 0.5 kg filament so I decided to make a better coil holder which is 1kg and of course bigger. I recommend printing from PETG material to a line thickness…
This design is an upgrade for the spool holder in the TINA2. The holder will have some problems with the bigger spools since the height of the printer is small to start. Instead of giving it more height for clearance I chose to use the…
This Tina2 full size spool holder uses the original nut and bolt. works great with no interference with the extruder lever.
I found a model similar to this, but the fitment was poor, it could wiggle into direct contact with the heat-block because the clips were very misized for the geometry present.. So I remade my own from scratch, with as reasonably precise…
Just enough space to hold a couple of things for the Tina2 / MP Cadet. The left side and the right side are different lengths from the slot on the top of the. SO unfortunately they are not interchangeable.
The Weedo Tina2 have a 100x105 bed and this remix of the original Mini Spool holder use the full volume to provide the maximum distance between the bearings (no change vs. original).
Drawer to go under the printer. The 80mm drawer is pictured. It turned out much bigger than I thought so I created the 50mm drawer as well. I also included a cover for the Y-axis belt. Although unlikely, I would hate for someone to put…
Print Settings Printer brand: Zortrax Printer: M300Plus Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100% Filament brand: Zortrax Filament color: White Filament material: ABS-2
Mit diesem Filamenthalter könnt ihr 1kg Filamentrollen an eurem Tina2s benuten. Einfach den originalen Filamenthalter abschrauben (2 M3 Schrauben) und diesen hier wieder anschrauben. Gedruckt mit dem Tina2s selbst. With this…
INA219 sensor model. The textured Solidworks model is in the .ZIP folder. Lower detail STEP files are also available. The Solidworks model has two configurations for the with/without pin header. The model also contains electrical…
Replacement feet for a 43" Insignia TV I acquired. The TV in question uses M4 screws.
Tina2 Spool Holder Extension
Without a clip over time the bowden tube slipping in and out of the fitting coupler. It ruins 3D printing. In the worst case the tube pops out of the fitting and must be replaced. This applies to both the extruder and the hot end. The…
I'm using this shorty remix of Angryhulk's spool holder with 608 skateboard bearings on my Ender3 and wanted to fit it to my small army of Tina2's. For the record: Tina2's go by many different brands and names. Bresser Raptor, Monoprice…
This filament spool holder is designed for easy removal of the lever/beam, such as for traveling. Simply slide it up to remove. Without the lever sticking out, it's easier to pack. The lever allows two bearings but I found it worked best…
This is a remixed, further increased by 20mm to improve the air circulation. This is to improve air circulation under the printer to the motors. This fixes issue with unstable long prints which could overheat the motors and excessive…
A little remix of the Anti-Z wobble mod for the Tina2 V3 by @Wingertsknorze. Update for the Tina2 V7 (and it's clones) that does not have a nub on the end of the Z-axis leadscrew, requiring a larger hole to insert the leadscrew. Added a…
J'ai réalisé une protection du ventilateur pour la Tina2, en m'inspirant de celui de la Tina2S. Print Settings Printer brand: Zortrax Printer: M300Plus Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100% Filament brand: Zortrax…
Designed for Fat Daddy´s v4 low profile 510 and keystone battery connectors P/N: 228 and 209 This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/icMLb2AT3zu Print Settings Resolution: 0.2 - 0.3 Notes: ABS…
The same Model as the original, just separated and ready to print directly on the Tina2 itself
I sliced it using the Tina2 version of Cura at the Normal profile. No Supports, no Adhesion. You can print all 4 at once. The Original works but is a bit unsteady. I added the Taller&Stable version to address this.
This model has some space removed internally on both the case and back cap in order to fit desired components such as a tactile button, .96 OLED Screen, and a INA219 voltage meter. The meter allows the user to view voltage state on-board…
The "my kid doesn't know how not to touch the 3D printer button" cover
This Will Need Supports I needed to get my Tina2 off the table top to reduce the noise, but I wanted something a little more… “eccentric” than what I was able to find. I was originally going to just print a set of Rinoa's feet, but got…
Remplacement des douilles à bille LM8UU du plateau par des douilles en pur plastique iglidur® RJ4JP-01-08, limitant les bruits de déplacement en Y. Utilisation de l'ASA comme type de filament.…
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! You can download my prepared prusaslicer files for Mk4 or you can use my original *.STL model for your own custom modifications…
A replacement part of the Z bearings holder.
Doesn't require supports. They're mirrored versions, depending on which side you want it.
This bracket holds full-size 1kg spools of filament far enough back such that they do not foul the extruder mechanism, and the filament unrolls smoothly. It is remixed from the excellent "hook" design from another bracket, so the weight…
The Murena 2 Smartphone is a privacy focused device that provides a feasible alternative to established giants. It has been produced by small company in a small batch comparatively. They did an awesome job in the software and I really…
Just a cut section of the original model
LaskaKit INA219 proudový senzor 3D model modulu s čidlem INA219 LaskaKit INA219 proudový senzor pro měření protékajícího proudu a napětí Stránka produktu: https://www.laskakit.cz/laskakit-ina219-proudovy-senzor/ Github:…
3D printable replacement for "Fox Bullet Tool 398-00-657" to aid installation/removal of airshaft during service. Hole through the middle to allow air through making installation a little easier. 2x versions: One without and one with…
This adapter plate mounts an Adafruit INA238 current sensor PCB to a DIN rail clip (shown below) so that the PCB can be mounted on DIN rail.
I've Tested the profile to make sure that the Printer would not Crash into Itself while Covering as mutch Bed surface as i could The only drawback of this profile is that the Printer will stay idle until it reaches the Enstablished Bed…
Just a better arm for TINA2. No Glue needed I printed all these pieces without support.
Not too many changes from the original design by krid. I did add a mech. mod chip bay for those wanting to go that route. Category: DIY
The motor sits on a ball-bearing rocker arm that transfers the thrust through a single steel ball onto a 2 kg load cell. This keeps the force path defined and free of side loads. All parts print without supports. Additional parts for the…
If you bought the LUNA2000-5-E0 modules from NKON and are converting them to a JK inverter BMS, this is the case for the balance adapter PCB that comes with them (80 × 60 mm, 16S pads, 2.54/2 mm headers, JST-XH and 2×9 side-entry…
This adapter plate mounts an Adafruit INA238 current sensor PCB to a DIN rail clip (shown below) so that the PCB can be mounted on DIN rail.
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! You can download my prepared prusaslicer files for Mk4 or you can use my original *.STL model for your own custom modifications…
J'ai réalisé une protection du ventilateur pour la Tina2, en m'inspirant de celui de la Tina2S. Print Settings Printer brand: Zortrax Printer: M300Plus Rafts: Yes Supports: No Resolution: 0.2 mm Infill: 100% Filament brand: Zortrax…
This Will Need Supports I needed to get my Tina2 off the table top to reduce the noise, but I wanted something a little more… “eccentric” than what I was able to find. I was originally going to just print a set of Rinoa's feet, but got…
