Wyniki wyszukiwania: nanovna

Sortowanie

Liczymy pasujące modele…

P
Printablesscarrson

NanoVNA-H4 Rugged Box

A box for your NanoVNA-H4. Includes room at the SMA connectors for you to leave your adapters on the VNA if you like (I have BNC adapters on mine). Fits the SMA calibration standards and has lots of storage room under the NanoVNA and in…

Pobrania
1358
Polubienia
160
Ocena
4,82
P
PrintablesW5AUG

NanoVNA Calibration Storage Box

Please like and follow and post your makes This is a small secure matchbox sized storage container for your Nano VNA calibration standards that generally come with a NanoVNA device in the SMA form factor. There are three positions and…

Pobrania
495
Polubienia
84
Ocena
5
P
PrintablesKaan Yaren

NanoVNA-H Box, Rugged

Edit-11-03-2024 – Added f3d and STEP files for altering if needed. I remixed the box to fit NanoVNA-H's measurements, and modeled some infill to support it. The fillings also have spaces for calibration bits and couple of converters. The…

Pobrania
462
Polubienia
67
Ocena
4
P
Printablesmac310

NanoVNA simple case

Simple case in one piece

Pobrania
377
Polubienia
24
Ocena
4,67
P
PrintablesDerek Smoriga

Case for NanoVNA V2

This case for the NanoVNA V2 needs at least four 1.4x10mm screws but looks better with 8 screws. Rubber feet can be printed in TPU and might be fixed with a drop of epoxy. As the TPU tends to draw strings there is a single foot for a…

Pobrania
350
Polubienia
3
Ocena
5
P
PrintablesAdrian

NanoVna cover

Nano VNA protective cover. Protects the device from damage and mikes it look finished

Pobrania
324
Polubienia
23
Ocena
5
P
PrintablesRik M0RKM

NanoVNA-H4 Stand

This is a two part stand for a NanoVNA H4. The H4 is a bit thinner than the V2. This stand requires 2 prints of the bracket to be made, these brackets then slide onto the H4. They have lips on them to stop them from flopping about. The…

Pobrania
286
Polubienia
37
Ocena
5
P
PrintablesOK1HRA

Parametric enclosure for NanoVNA

With thanks to @edy555 , and for more fun (firmware GitHub ). Also published here

Pobrania
273
Polubienia
20
Ocena
0

NanoVNA Calibration Dongle

Handy tool, to keep the SMA calibration connectors together so you don't lose them. Also makes it easier and faster to do the calibration. The SMA connectors fit perfectly into the holes without any glue. O = Open S = Short L = Load No…

Pobrania
259
Polubienia
32
Ocena
4,5
P
PrintablesKB9RLW

Case for the NanoVNA test fixture PCB.

This is a case for the little test board. There are two versions of the top. I configured my board with the top left connector shorted, the top right connector has a 50 ohm resistor, and the bottom two connectors are bridged. I use these…

Pobrania
230
Polubienia
12
Ocena
5
P
Printableswerner_rh

NanoVNA-F V2 Stand and Storage

DIY stand and storage for the NanoVNA-F V2 from the 3D printer. For easy reading, the display (the entire NanoVNA-F) can be installed in the be set up at a 45 degree angle. At the same time, the stand serves as a storage box and contains…

Pobrania
213
Polubienia
15
Ocena
4,33
P
PrintablesOrnotermes

Case for NanoVNA (white gecko)

This is a case for a variation of the NanoVNA (Vector Network Analyzer, a radio tool), I got a white one with a gecko on the front, it comes with a front and rear PCB but I didn't felt it got enough protection from that, so I wanted to…

Pobrania
210
Polubienia
15
Ocena
5
P
PrintablesBob Coggeshall

NanoVNA Calibration Connector Holders SMA

Every NanoVNA comes with 3 little SMA calibration connectors - Open, Load and Short. They are small, look similar and get lost easily. These are 3D printed keepers. They are labelled and have a hole for connecting together on a cord. Your…

Pobrania
201
Polubienia
36
Ocena
5
P
Printablesjeepin95

NanoVNA and TinySA Box

With some inspiration from a few other box designs I made my own semi-rugged box to contain my NanoVNA and TinySA together and keep them a little protected. I integrated a ledge for the tray to sit on which helps to hold the devices in…

Pobrania
186
Polubienia
23
Ocena
0
P
PrintablesK.A.T.

NanoVNA-H box

A box for your NanoVNA-H. Includes room for SMA connectors, USB cables No support needed 6 M3 x 30mm screws for the hinge and latches needed

Pobrania
179
Polubienia
13
Ocena
0

case for liteVNA / nanoVNA

DOEST'T work for liteVNA 64! this is a simple case for nanoVNA and liteVNA the only additional materials you'll need are 3x2.5 magnets and some cut wire for the hinges

Pobrania
176
Polubienia
28
Ocena
5
P
PrintablesJammerX19

NanoVNA SOL calibrator holder

Just wanted a way to keep the three calibration keys for my Nanovna antenna analyzer. This holds the small SMA tips very snugly, no glue required. Requires no supports. Print at 0.1mm layer height and inject a color change command just…

Pobrania
168
Polubienia
22
Ocena
4,5
P
PrintablesCzechu

NanoVNA calibration standards holder

Multi-color version. Fits SMA short-open-load (SOL) calibration standards for NanoVNA-H4

Pobrania
126
Polubienia
13
Ocena
0
P
PrintablesGadero81

NanoVNA-H

A simple container for the tiny NanoVNA-H version.

Pobrania
121
Polubienia
10
Ocena
0
P
PrintablesPunkelopment
Pobrania
99
Polubienia
10
Ocena
5
P
PrintablesGaudibursch74

NanoVNA V2 Plus4 Stand

Stand for the NanoVNA V2 Plus4 With integrated holder for the stylus and the three calibration plugs (open, short, load). In addition, the female/female SMA adapter can be accommodated here. Ständer für den NanoVNA V2 Plus4 mit…

Pobrania
97
Polubienia
12
Ocena
4,5
P
PrintablesJoergH

NanoVNA Gridfinity Einsatz 2x3xu3

Gridfinity Einsatz um den NanoVNA -H (mit Gehäuse) gut und sicher zu transportieren. Der Einsatz ist durch die Gyroid-Füllung weich, bietet aber noch genügend halt. Gridfinity 2x3u3. Passt gut in eine Box 3x3u6 Filament: TPU polymaker…

Pobrania
97
Polubienia
11
Ocena
0
P
Printablesrkayakr

nanoVNA-H BNC/SMA connector holder

This is a nanoVNA-H base that holds two BNC/SMA connectors firmly to save SMA life and relieve strain on the nanoVNA. The design is done in OpenSCAD, so it is completely parameteric. The stl files are for a Huygen nanoVNA-H which has a…

Pobrania
96
Polubienia
20
Ocena
0
P
PrintablesMoxneo

Thin NanoVNA-H Travel Case With Storage!

This custom-designed travel case for the NanoVNA-H Vector Network Analyzer offers a slim and efficient solution for transporting the device and its accompanying adapters. The design process prioritized maintaining a slim form factor while…

Pobrania
92
Polubienia
22
Ocena
4
P
Printableseried

Improved NanoVNA V2 case

Improved case for the NanoVNA v2. Changes from @corecode's case: -Lip around the case for sealing the 2 pieces together -Straight screw holes for sinking the screws -Holes for lights -Place for adding a lanyard loop (or string for the…

Pobrania
81
Polubienia
2
Ocena
0
P
PrintablesBrettH

Elikliv NanoVNA-H storage case

This is a case I designed for the Elikliv NanoVNA-H. Main body is approx 92mm x 58mm, so if yours is that size or smaller it should fit fine. Has enough room for calibration bits, usb cable, and the thru cables. You can even leave a bnc…

Pobrania
79
Polubienia
14
Ocena
0
P
PrintablesStefan Junger

NanoVNA-H Hülle/Etui

Das Etui ist etwas länger um einen “Opfer-Adapter” nutzen zu können. SMA-Anschlüsse verschleißen leider recht schnell. Daher schraube ich grundsätzlich einen weiteren Adapter dazwischen um die Lebenszeit am Gerät zu erhöhen. Zum Drucken…

Pobrania
79
Polubienia
13
Ocena
0
P
PrintablesAiridas S

NanoVNA-H4 light

NanoVNA-H4 light

Pobrania
69
Polubienia
6
Ocena
4
P
PrintablesRexodus

NanoVNA H softcover

Print this in TPU 80, TPE or similar. Update: made some minor adjustments. Should fit even better now… Late night update: Created one with a lanyard hole.

Pobrania
65
Polubienia
7
Ocena
0
P
PrintablesSmithChart

nanoVNA Rugged Box

After years in a shabby cardboard box: Finally a rugged box for my nanoVNA! There are already a few models for the nanoVNA-H. But I could not find one that looked like it would fit this bare-bones version… So I had to design one. This box…

Pobrania
63
Polubienia
15
Ocena
0
P
PrintablesTechineer

NanoVNA-H4 Stand

DamienB2 provided a very nice stand for the Tiny SA Ultra, (See the Remix Link) but I could find no equivalent for the Nano-VNA, so I remixed his to fit the NanoVNA and have posted it here. The base and stylus are directly from DamienB2's…

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesEmemell

NanoVNA-H4 desktop stand

The NanoVNA-H4 neatly pops onto this stand, held in place by small lugs that fit into the screw holes on the back of the device. It leaves all the controls accessible and has enough clearance for a small USB C cable at the bottom. There…

Pobrania
54
Polubienia
5
Ocena
0
P
PrintablesSubBass100

NanoVNA-H Storage Case with Lid

I didn't see many cases for the Nano VNA H that could hold all the stuff it comes with so I made this. It has storage inside for calibration tools, pigtails and sylus. The lid friction fits and keeps everything together well enough. Enjoy!

Pobrania
51
Polubienia
7
Ocena
0
P
PrintablesPrinter Hell

NanoVNA H4 Hard Case

The NanoVNA slides in from the end and snaps into place. Accommodates BNC connectors up to 23mm long. Includes a holder for the stylus. I printed it with 4 walls and 25% gyroid infill because I like overkill. Will probably work just fine…

Pobrania
50
Polubienia
6
Ocena
0
P
Printablestreadd

NanoVNA Calibration Storage

Simple storage tube for the calibration accessories and dust caps. Long tube can hold all accessories + 2 dust caps Short tube can hold the 4 calibration accessories. (No dust caps) Print Settings Printer Brand: Creality Printer: CR-10S…

Pobrania
50
Polubienia
12
Ocena
5
P
PrintablesMortymore

TinySA Ultra and NanoVNA-F unfoldable stand

Printed in PLA (0.2mm), pint-in-place and no supports needed, it was designed to fit inside the instruments case and to be a simple stand. The difference between the 2 options is that the stand specialy intended for the TinySA Ultra+ has…

Pobrania
47
Polubienia
6
Ocena
0
P

NanoVNA-F V2 Table Stand

Simple table top stand to hold your NanoVNA-F V2 vertical while tuning small vertical antennas. The buttons on the bottom prevent the unit from standing up on its own. I threw this together quickly to allow me to tune 915MHz antennas for…

Pobrania
38
Polubienia
8
Ocena
0
P
Printablesnuxnik

NanoVNA and RF Test Board Holder for HSW

As you probably know, the nanoVNA is really cool. However, the small SMA calibration connectors and cables are a pain to keep track of. I was also having a problem finding a place to puy my demo RF board and ended up cramming it in the…

Pobrania
37
Polubienia
8
Ocena
5
P
Printablescorecode

NanoVNA V2 case

Case for NanoVNA V2 Hardware 8x M3x12mm, either button head or flat head (countersunk). Category: Tool Holders & Boxes

Pobrania
34
Polubienia
0
Ocena
0
P
Printablespop aruaru

NanoVNA case

2.6インチ液晶を使用したNanoVNA用のケース。安価なものは2枚の板でサンドイッチされて販売されているが、RC4のガラス繊維のせいか手に持つと痛いので、ケースを作成した。若干高価であるがABSのケースを使用したものを購入することをお勧めする。外周だけを覆う3Dデータもあるので、ノイズの面でも、そちらの利用をお勧めする。…

Pobrania
32
Polubienia
4
Ocena
0
P
PrintablesMZ7

NanoVNA case

The case for the NanoVNA board. 8x screws - М2.5 4x racks - 4mm

Pobrania
31
Polubienia
4
Ocena
0
P
Printables3dw1n

Bumper case for LiteVNA 64 / NanoVNA vector network analyser

Bumper case for LiteVNA 64 / NanoVNA vector network analyser Printed in sainsmart TPU with organic supports STEP file including a LiteVNA model avaialble

Pobrania
30
Polubienia
5
Ocena
0
P
PrintablesNikdfish

nanoVNA slide box w inside cover

I wanted a box to keep my nanoVNA safe & organized when not in use. This is a slide top box with an inner lid to separate the volume into two areas. The bottom section is divided into three areas, a large center space for the unit &…

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesJisun Yun

NanoVNA test board case

If you want accurate measurements with your nanoVNA, a proper test jig is essential. In this video, I design and build a DIY nanoVNA test jig using a 3D printer and SMA connectors. This is not just a build — we also test how much the…

Pobrania
26
Polubienia
6
Ocena
0
P
PrintablesGadgetChris

Stand for NanoVNA-H4

Inspired by 635030-nanovna-h4-stand, I wanted to have a stand with variable viewing angle. Also I wanted to have a place to keep the stylus. It still can be stored in the original box the NanoVNA came with. I printed it in PETG .2mm layer…

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesSmokintbird

Resistive Touchscreen Stylus (for my NanoVNA)

Flat stylus for the resistive touchscreen on my NanoVNA. Pictured is printed in Polycarbonate but any material harder than TPU should work just the same.

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesMakerJoe

NanoVNA-H Case

Travel case for the NanoVNA-H model. Being iterated but can be changed to your desire. No lid as yet, will update once modeled. Case accomodates the touch stylus, the NanoVNA-H one pigtail SMA lead, 3 Calibration assets and 1 connector…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesTom Wardill

NanoVNA Gridfinity Bin

A 4x3x4U gridfinity bin to hold a NanoVNA with extra components for the calibration accessories and cables. Designed using https://github.com/igalarzab/gridfinity-generator-onshape Original Onshape File:…

Pobrania
19
Polubienia
3
Ocena
0
P
Printablesgergoo_ic

NanoVNA-H Box Insert

I made these custom inserts for the NanoVNA-H box because I wasn’t thrilled with the original made of flimsy white plastic. This new insert fits the calibrator connectors and cables right below the VNA. I printed the one with two…

Pobrania
19
Polubienia
1
Ocena
0
P
PrintablesMortymore

NanoVNA-F V3 Stand

Inspired in "NanoVNA-H4 Stand" by w0nrp (thing:6599600) Tilting stand for the NanoVNA-F v3, with 2 bases, one of them intended for accessories storage. A M6 screw and nut will be needed. There's two clips to secure the NanoVNA that may…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesKB9RLW

Stylus caddie for the SeeSii NanoVNA-F V2

Keep the stylus at hand. Simple caddie that sits on the top or bottom of the unit and uses the existing case screws. It should be printed on it's side, and you might need a brim enabled. The stylus will slip into the hole and lock in…

Pobrania
17
Polubienia
4
Ocena
0
P
PrintablesAdam Zeloof

macroPFA (Benchtop Phase Frequency Analyzer based on the nanoVNA-H4 / tinyPFA)

This is essentially a docking station for the nanoVNA-H4. When coupled with the tinyPFA firmware (which I have no association with), it becomes a pretty powerful (and cheap) Phase Frequency Analyzer. If you aren't familiar, PFAs allow you…

Pobrania
16
Polubienia
4
Ocena
0
P
Printableshotwolf

NanoVNA case

A case for a NanoVNA-H4 with accessories.A case for a NanoVNA-H4 with accessories.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesFrank

Gehäuse für NanoVNA V2

Gehäuse für NanoVNA Netzwerkanalyser zweiteilig.

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesRobWoo

NanoVNA V2 Case

S-A-A-2 / NanoVNA V2 (Chip Aliexpress NanoVNA) case Simple, Quick, no extra component required, goes between the front and back plate, secured with the original screws.

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesPadure

NanoVNA V2 / S-A-A-V2 Gridfinity

Gridfinity bin for the NanoVNA V2 (S-A-A-V2).

Pobrania
12
Polubienia
0
Ocena
0
P
Printablesn9dmt

Pegboard NanoVNA Holder

Overview Not exactly a remix, but it is designed based on the size of the awesome NanoVNA case by Hagster . Just a simple box to hold your NanoVNA on 1in pegboard. Category: Organization

Pobrania
12
Polubienia
2
Ocena
0
P
PrintablesJon Vanderwoude

NanoVNA multiboard holster

Holster for nanovna on multiboard. https://www.multiboard.io/ You'll need either a pair of multipoints or a rail to place it on, whole thing lifts off easily when you need to remove it. SMA plugs stick out the bottom with space for the…

Pobrania
11
Polubienia
3
Ocena
0
P
Printablesvifino

NanoVNA-F V3 Gridfinity Holder

This is a relatively simple Gridfinity holder for a NanoVNA-F V3. It is designed to let the NanoVNA-F V3 be lifted out of the bin by grabbing between the SMAs and tilting it upwards. This lets you pull it out with just one hand.…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesVincent

NanoVNA-H Hard Case Remix

Changes from the original: Bottom height reduced by removing the pocket under the VNA. Passthrough added from VNA to the storage area so that the lanyard can stow easily. Extra area available between the SMA connectors by removing the…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesSmokintbird

NanoVNA cover

Fairly minimalist “slip fit” cover for the NanoVNA that fits in all 4 possible ways with a light friction fit. Intended to fit the Resistive touchscreen stylus model…

Pobrania
8
Polubienia
3
Ocena
0
P
Printablesbwaslo

nanoVNA or tinySA alternate base for adjustable stand

The original bases for these nanoVNA and tinySA stands were simple rectangles, using more plastic and occupying more bench space than necessary. I reduced them into a rounded mid-century-modernish "space-age" shape that I think looks a…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesR63D

Gridfinity bin for the NanoVNA

3x3 Gridfinity bin for the NanoVNA This is a single color print, ignore the color around the top edge. I add them to my gridfinity bins using a modifier in the slicer software.

Pobrania
6
Polubienia
1
Ocena
0
P
Printablesaaverill

NanoVNA Gridfinity box with space for Calibration holder

A NanoVNA gridfinity bin, that has room for this calibration organizer https://www.printables.com/model/284596-nanovna-calibration-storage-box

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesbwaslo

Holder/Stand for basic nanoVNA (not L or H or V2....).

I have both a tinuSA ULTRA and a nanoVNA basic, both of which are really neat and useful devices for antenna and electronics work, but are nearly unusable in my shack or in my lab/shop when just laying on their backs because reflections…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesStigy

NanoVNA-F V2 Skadis Holder

A compact holder for mounting a NanoVNA-F V2 Vector Network Analyzer on an IKEA SKÅDIS pegboard. This version is designed around my NanoVNA-F V2, which measures: 22.5 × 74.5 × 128 mm The NanoVNA is inserted and removed sideways from the…

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

NanoVNA-H Case

Travel case for the NanoVNA-H model. Being iterated but can be changed to your desire. No lid as yet, will update once modeled. Case accomodates the touch stylus, the NanoVNA-H one pigtail SMA lead, 3 Calibration assets and 1 connector…

P
Printables

Case for the NanoVNA test fixture PCB.

This is a case for the little test board. There are two versions of the top. I configured my board with the top left connector shorted, the top right connector has a 50 ohm resistor, and the bottom two connectors are bridged. I use these…

P
Printables

NanoVNA V2 Case

S-A-A-2 / NanoVNA V2 (Chip Aliexpress NanoVNA) case Simple, Quick, no extra component required, goes between the front and back plate, secured with the original screws.

P
Printables

NanoVNA-F V3 Stand

Inspired in "NanoVNA-H4 Stand" by w0nrp (thing:6599600) Tilting stand for the NanoVNA-F v3, with 2 bases, one of them intended for accessories storage. A M6 screw and nut will be needed. There's two clips to secure the NanoVNA that may…

P
Printables

NanoVNA-F V3 Gridfinity Holder

This is a relatively simple Gridfinity holder for a NanoVNA-F V3. It is designed to let the NanoVNA-F V3 be lifted out of the bin by grabbing between the SMAs and tilting it upwards. This lets you pull it out with just one hand.…

P
Printables

TinySA Ultra and NanoVNA-F unfoldable stand

Printed in PLA (0.2mm), pint-in-place and no supports needed, it was designed to fit inside the instruments case and to be a simple stand. The difference between the 2 options is that the stand specialy intended for the TinySA Ultra+ has…

P
Printables

NanoVNA V2 / S-A-A-V2 Gridfinity

Gridfinity bin for the NanoVNA V2 (S-A-A-V2).

P
Printables

NanoVNA test board case

If you want accurate measurements with your nanoVNA, a proper test jig is essential. In this video, I design and build a DIY nanoVNA test jig using a 3D printer and SMA connectors. This is not just a build — we also test how much the…

P
Printables

NanoVNA-H Box, Rugged

Edit-11-03-2024 – Added f3d and STEP files for altering if needed. I remixed the box to fit NanoVNA-H's measurements, and modeled some infill to support it. The fillings also have spaces for calibration bits and couple of converters. The…

P
Printables

NanoVNA-F V2 Table Stand

Simple table top stand to hold your NanoVNA-F V2 vertical while tuning small vertical antennas. The buttons on the bottom prevent the unit from standing up on its own. I threw this together quickly to allow me to tune 915MHz antennas for…