4070 modeli
Note: printables.com is being very opinionated about these gcode files and won't allow most of them to be posted. Please find all the gcode files on thingiverse here: https://www.thingiverse.com/thing:4714033 . Refined Bed Leveling &…
Wydruk około 0,16 €–0,20 € nettoWstępna wycena jednego wariantu
This is to help you get that perfect first layer and determine where you need to make adjustments on your 430x430 bed. This will work with any 3D Printer. Just scale to size of your printer. The pattern was modeled after bed screws on…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
A refinement of Emmett Lalish's excellent Gear Bearing -- now with chamfered edges, a smoother outer surface, and dimples for your fingers to hold. Internal geometry and clearances/tolerances remain unchanged. Prints great in PLA, PETG,…
Wydruk około 0,88 €–1,08 € nettoWstępna wycena jednego wariantu
2022-12-21: I've added a new single blade version which doesn’t require magnets or glue to assemble. 2022-12-21: I've added a new version which only has the page holder and no blades. 2022-12-20: Magnetic bookmark with two blades…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Info: carabiner modification of my previous model so this carabiner has the same locking hook , which does not allow carabin to be extended added: partition for key rings (key rings can be put inside through the gap and it will hold them…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
use ❗PETG❗ or some flexible material (do not use PLA) Info: carabiner modification of my previous model this variation is more stiff (harder to open, harder to insert key ring through the gap) Dimensions: its height is 7,5 cm (bigger by…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This has now been tested. :D This is a beefed up Einsy case for the Prusa Mk3. It includes: • Frame brace. • Reversed Einsy for easy access • Space for cables so they don't squish all over the board. • Improved cable access ports • A port…
Wydruk około 3,41 €–4,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Allow your treasured handbag to take a break in style with our beautifully crafted Portable Purse Holder Hanger Hook. Perfectly designed for use on any table or surface, it keeps your purse handy and clean while enhancing the aesthetic of…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena jednego wariantu
For my use case, I needed a stand with a steep angle to see the floor in one of my rooms. It fits really snug, so depending on your printer and settings you might have to experiment with the step file a bit.
Wydruk około 1,35 €–1,65 € nettoWstępna wycena jednego wariantu
Inspired by the original and remixed versions, I had a few things I wanted to modify to really take advantage of a great model. Highlights: Glue-free push-fit design (nb: requires accurate 0.2mm tolerance printing) Added pin-eject holes…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
APOLOGIES to the first dozen or so people who viewed this. I uploaded an error that is now fixed. I've printed now the “Lego Lightsaber Hilt (Human Scale)" by ReProps several times. This model addresses a couple little issues I had with…
Wydruk około 13,86 €–16,94 € nettoWstępna wycena jednego wariantu
Constantine St. Benedict Zippo Stash Box.
Wydruk około 22,50 €–27,50 € nettoWstępna wycena jednego wariantu
Simple remix with joined parts of https://www.printables.com/model/73423-logitech-g915815-vertical-keyboard-stand Update 11/11: I also recently purchased an Apple Magic Keyboard 2, the fit isn't perfect but it works well
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
Gerändelte 12V Zigarettenanzünder Abdeckung Designed für Skoda Octavia - natürlich auch universell einsetzbar. Mir gefiel am Ende die Version mit mittelfeinen Rändeln (Version “mid”). Tip: Einen guten Alu-Drehteil look erzielt man mit…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
I love 3DBROOKLYN's original SD Card Mountain. It's an excellent and beautiful design. I have two printers and prefer to use different SD cards for each. I also have more than 5 SD cards. Therefore I've remixed the original design to: 1)…
Wydruk około 2,27 €–2,78 € nettoWstępna wycena jednego wariantu
These hammer pieces are for holding various hammers that i have. hopefully the sizes fit for you. they are modular. I use these flat bins to fill in the voids. Individual I have 4 hammers - - 2.5lb ESTWING sledge - 2-1/2" rubber mallet…
Wydruk około 13,19 €–16,13 € nettoWstępna wycena jednego wariantu
I bought from Prusa a second original spool holder in order to hold 4 spools at a time in my little enclosure. But original holders endpart are way too large for only 1 kg spools and take too much space in my expected configuration. So, I…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
This is a recreation and a funny customization to our printers. If you are a proudly owner of a PRUSA MINI, maybe you would like to have it signed by Josef Prusa, this can happen if you assist to a 3D printing fair whith a PRUSA stand,…
Wydruk około 7,12 €–8,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 3D printed enclosure (three parts: left, middle, right) holds two 8 module Max7219 display boards. Included are the .stl files and the Fusion 360 (source model) .fd3 file. It also requires a front piece of red acrylic plastic 1/8"…
Wydruk około 8,67 €–10,60 € nettoWstępna wycena jednego wariantu
Remix of Gridfinity Swann Morton scalpel holder . This model holds up to two scalpels and has space for extra blade storage like the original. Each compartment has a detent, so you can push down on the back end of the scalpel, raising the…
Wydruk około 3,18 €–3,89 € nettoWstępna wycena jednego wariantu
Immerse yourself in the world of automotive elegance with the Mercedes 190SL wheel, a perfect harmony of timeless style and unparalleled performance. This wheel embodies the excellence of Mercedes craftsmanship, combining quality…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Based on toon Dodge A100 van "The Mystery Machine" from the Scooby Doo series. Modified version with surfboard and slammed wheels. Powered by small block V6. Parts are optimized for supportless print.(However, if you have problem with…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
This is a remix of jimerb's legendary 4-function back scratcher. Please go to their page and like the model! This is a simple union of the base and handle into one long part. The length is scaled to 88% of original. It's 330mm long to fit…
Wydruk około 4,61 €–5,63 € nettoWstępna wycena jednego wariantu
CT Scanned Pinecone brought over from https://www.thingiverse.com/thing:783869. Printed pretty well, although clearing out the supports was a bit tedious. Printed at about a 45 degree angle with auto-supports on in PrusaSlicer.
Wydruk około 6,70 €–8,19 € nettoWstępna wycena jednego wariantu
Shortened version of the bottom part of the original model from @TomekZimoch to fit on the Prusa Mini.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
⭐ Foldable 3D Star – transforms into a Christmas Tree when opened A decorative model that combines two holiday themes in one: when closed, it forms a geometric star; when the top element is lifted, it unfolds into an eye-catching, layered…
Wydruk około 5,12 €–6,25 € nettoWstępna wycena jednego wariantu
Helpful Tool to Store Stained Glass or for Light Edge Dying or Drying Leather Edges after Dying, Painting, Gluing or Prepping Work Use with specially designed Holder for Leather Edge Dyeing & Drying Rack - Expandable Display 14 Slots from…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Strengthened version SHR3D.eu's peace pendant. I printed the original made by SHR3D.ed however the small connection from the lanyard hole to the pendant broke so I beefed it up a bit. Everything else about the pendant is the same and…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
What is inside the doorlock mechanism we use everyday? Principle of this ingenious mechanism is presented in the half-cut enlarged doorlock model with simple pin mechanism. If you lost your key you can always print another! Spring-loaded…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I bet that all of you have already come in touch with famous Stanford bunny. Actually, for me, its low-poly version was the first print that I ever made back in a day in the university on an overpriced Makerbot machine that was just shit.…
Wydruk około 3,22 €–3,94 € nettoWstępna wycena jednego wariantu
I needed a way to protect outdoor vents from things getting inserted, I was worried about kids bouncy balls or a water hose, but perhaps more practically this protects from mice or tree berries. After purchasing some stainless steel…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Refined Simon's grease filler. Prints a bit better and faster. No supports needed. 2 perimeters is enough. Attaching f3d file if anyone wants to tweak it.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I did an assembly drawing to help and ease the job of anyone that want to make the steam locomotive designed by beberto. Extra help: For the barriers, I supplied 3 files with the left and right version together. The left version being the…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
great for all ages
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Contenedor, Tarro, bote
Wydruk około 3,23 €–3,95 € nettoWstępna wycena jednego wariantu
I designed different add-ons for the Bassel (Bâle) Swiss tram designed by Small parts at https://www.thingiverse.com/thing:5374263. You will find black doors and windows contours, gray plating for the top car equipment, white stripping…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
Phoenician Openwork Furniture Plaque with a Horned / Winged Sphinx / Griffin : Restoration This piece is a famous Phoenician / Neo-Assyrian carved ivory furniture inlay from the Nimrud Ivories collection. In museum catalogs (such as The…
Wydruk około 8,40 €–10,27 € nettoWstępna wycena jednego wariantu
SHIP ABANDONED ICEBREAKER LOD LEDOBOREC
Wydruk około 2,41 €–2,95 € nettoWstępna wycena jednego wariantu
Originally I was dissatisfied with how my X axis camera mount was fairly loose on the motor, while printing some cool motor visualizers I found that Clement's mount for the Hypnotic Extruder Visualizer was considerably more stable. So I…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena jednego wariantu
This is a 1x1 Gridfinity Refined version of my standard Gridfinity holder for a set of Threaded Insert Soldering Iron tips. I'm a big fan of the Gridfinity Refined bases (no magnet gluing, can be held with a screwthread) - so please do…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena jednego wariantu
I designed pins to assemble the wheels, cabin and propeller. I also design decals. I did an assembly drawing to help anyone that want to assemble this Biplan airplane.
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
este contenedor sirve para almacenar las agujas por tamaño, ya que cuenta con 3 compartimentos con diferentes alturas
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
A simple hook and latch drawer lock to prevent prying toddler hands from opening drawers and accessing their contents. Few other drawer locks work for my drawers, which are mounted into a face frame and have drawer fronts with narrow…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
This is a solution for anyone who wants to efficiently store a set of gridfinity refined plates (with bins). I found myself with 4 sets of bins for various projects, each of which was on a 4x4 Gridfinity Refined (GR) baseplate. When…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena jednego wariantu
A carabiner that is suitable to carry your keys or a small draw string pouch to attach to your bag or person. This is a partitioned carabiner and intersecting locking hook. This is made with PLA and two different perimeters for…
Wydruk około 0,30 €–0,36 € nettoWstępna wycena jednego wariantu
The Inclined Salamander Positioning Device (ISPD) is a 3-D printed device designed to assist with the collection of sperm from axolotls and has potential uses for other salamander species. This device could also be applied to veterinary…
Wydruk około 9,79 €–11,97 € nettoWstępna wycena jednego wariantu
Printing instructions First layer: 0.2mm Other layers: 0.15mm Optional color change at: 0.8mm (layer 5) Detailed explanation of why and how this was designed: https://uwyn.com/tactile-patch-sheets
Wydruk około 1,93 €–2,36 € nettoWstępna wycena jednego wariantu
Design Concept The Duplo top inclined adapter is designed to enhance the playability of Duplo bricks, providing an inclined surface for added creativity in building setups. Unfortunately, the length of the pins had to be adjusted in this…
Wydruk około 3,67 €–4,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to celebrate the start of summer with a new model! I decided to try out make a swan floatie as a trinket dish. Print flat with some support under the head. MMU 3MF included Category: Sculptures
Wydruk około 2,23 €–2,73 € nettoWstępna wycena jednego wariantu
Modelo simple para sostener el magiclick silindrico que se encuentra en la foto. Usé un pequeño tornillo de M4 muy corto. Se incluye el archivo de Fusion 360 para editarlo a tu gsto y compartirlo (Con atribución) en donde quieras.…
Wydruk około 0,38 €–0,46 € nettoWstępna wycena jednego wariantu
Stabilizing foot for my IKEA Bittergurka flower pot.
Wydruk około 0,14 €–0,17 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign showcasing the ACME Canned Train, just the thing for quick getaways. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all…
Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu
I watched Josef Prusa's video on photogrammetry and tried it out with a donut hole. Uploading this as part of the gag print contest.
Wydruk około 1,66 €–2,03 € nettoWstępna wycena jednego wariantu
ISO 7000 symbol 0144 proportioned for solid ISO 7000 Symbol 0144 Proportioniert für Feststoffe
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is a custom-designed USB-C Apple Magic Mouse mover case. It uses the internals from this Amazon unit , which was initially built for a traditional PC mouse. That design worked fine for most optical mice, but the Apple Magic Mouse’s…
Wydruk około 8,66 €–10,59 € nettoWstępna wycena jednego wariantu
Half Skinned Viper Head
Wydruk około 16,22 €–19,83 € nettoWstępna wycena jednego wariantu
Veined and carved Karambit
Wydruk około 3,84 €–4,69 € nettoWstępna wycena jednego wariantu
Gridfinity refined (at least in my humble opinion) … Gridfinity Specification Gridfinity is a set of guidelines and standards, created by Zack Freedman. The general guideline is that everything is a multiple of 7. Baseplate grids are made…
Meet the ultimate “Highland Cow” : big horns, bigger fluff, and a fringe so long it’s practically a privacy policy. This chunky, seated Highland cow is sculpted with flowing fur, a boopable snoot, and soft, rounded hooves—perfect as…
Changelog: Added Polymaker Polylite ASA (4/20/23) Fixed the Polymaker ASA profile (4/21/23). I had uploaded the wrong one! Correct one is now uploaded as Polymaker_Grey_ASA_fixed.3mf (4/30/23): Fixed the ASA profile to have the filament…
The DUMB Wallet – D esigned U sing M inimal B ullshit It’s stupid simple. Like, really stupid... No sliders, no screws, no elastics, no levers and shit—just exactly what it needs to be. It holds your cards. It holds them really well. But…
Hey makers. Today i bring you this model that i intend to use as a lamp, it's Hollow and you put a 5v LED lamp (or whatever you might have laying around) inside it. The original model had a lot of polygons and i simplified it a bit but it…
Inspired by walttriano conversion for an Ender. Designed for the width of the x-axis profile 20mm in my Ender 3. It has a latch that allows you to easily arrange and close the cables. Demo video: Status of this project: First release v1.0…
After buying a Einscan-SE this was the first thing I scanned. a random buddha statue my wife owns. The details this thing got is amazing. Be sure to tune your support settings well. Print instructions Pretty can do anything with this.…
Change log: Added a PA-tuned profile for Bambu's PETG-CF (4/19/23). I usually use the Bambu presets.. but I was/am struggling with this filament. I do not recommend it. Added Overture Army Green PETG (4/20/23) Added California Filaments…
The Ultimate First Layer and Adhesion Calibration I designed this model to test several calibration and adhesion aspects like for example: Nozzle Offset Adhesion Roundness Small-feature performance Also it gives you an indication for…
This 3D model was originally created by Scott Yu-Jan and is shared under the CC BY-NC 4.0 license. You can find the original file on Makerworld: https://makerworld.com/en/models/615378#profileId-538769 License:…
I tried to make the “sliding section fidget cube thingy” that had a few versions pop up lately… but i wanted it to be parametric. attached is a FUSION 360 file for you to mess around with and get custom sizes! NOW IN KEYCHAIN SIZE! (note…
This is an OralB electric toothbrush head protector/case for when travelling, it can stop dirt and other items from touching the head of your toothbrush. Includes air vents to prevent moisture build up inside the case. How to use - place…
Modern designed self watering succulent planter with water chamber. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL + Fusion…
Changelog: 4/25/23: Added Overture High Speed Clear TPU. This one can print as fast as 10 mm^3/sec. Do not confuse this with regular Overture TPU! Did extensive tuning on this to reduce stringing and maintain best possible quality. Added…
This is an optimized version of the "Mechanical Planetarium" model by Zippitybamba. His original model is on Thingiverse here: https://www.thingiverse.com/thing:4613061 I printed a few parts of the original model on my Prusa I3 MK3S, and…
This was a 3d scan of a figure from the game assassins creed.
READ INSTRUCTIONS: I see a lot of the prints and you guys area printing it in the wrong orientation. It's much stronger if you print it with the Holder orientated how it would be when you use it. UPDATE: Added Glock 43x Needed a place to…
Changelog: (7 /18/23): Added Prusament Marble Grey PLA (5/20/23): updated / retuned Prusament Galaxy Black PLA. Improved PA value. (5/16/23): updated Sunlu_White_PLA+ and Sunlu_Grey_PLA+ with better PA values, min layer times, and retract…
Cleaned version of ダックスフンド（Dachshund）3Dデータ by YahooJAPAN. This has been manually retriangulated in Blender to remove small holes that were stopping rendering in OpenSCAD / CGAL, as well as smoothing out and/or deleting stray vertices…
This is a model I uploaded and strengthened the arms that are too thin at the bottom connection by raising the connecting bar and adding 2mm to the bottoms of the arms making them stronger and last longer. 15% infill Printed on Bambulab…
The bowl is sort of triangular so I pulled the back out to make it more oval. The westers47 remix was widened on the bed and printed (silver) and then deformed in blender to open the bowl cavity (white). I also pushed up the pallet…
Description : This slim & sturdy wallet has room for (6) cards and a bonus slot in the middle for paper cash. Why no coins? …Because: My Money Don't Jiggle Jiggle, it Folds . (sorry could not resist… lol). The model is quite versatile &…
Outside dimensions of the model: The holes are 6mm x 11mm This is version 5 of a plastic replacement buckle that I designed with the FDM 3d printing process in mind: No support is needed Prints in only 30 minutes Optimized print…
Edit: I just found out that @jerrymk_985120 made the OG Clickfinity . That's where all the magic happened. Sorry I didn't acknowledge all your hard work earlier, Jerry. I couldn't have done what you did. Recently found NoWarrenty's…
Bust of Alva, Seeker of the Spurned from Dark Souls 2 - 3. Sculpted in Zbrush. Supports and photography by Charro Zuck. If you like my work, please check out my twitter / artstation. Thanks and Enjoy! Twitter :…
17.02.25: New added model in files: Drainage Container - Just put it under the sponge holder (see pictures!) Say goodbye to messy countertops with this modern-designed sponge holder! Featuring a unique honeycomb base, it allows your…
Leon S.Kennedy orignal pistol from the video game Resident Evil 4. This pistol is based on a real one the HK USP. I have used the dimension of this real pistol to make the model. If you want to 3d print it, I advise you to choose the…
This haunting 2D pumpkin design perfectly embodies the eerie and festive atmosphere of Halloween. With its carved features and classic Jack-o'-lantern shape, this iconic symbol of Halloween brings a touch of spooky charm to any decor.…
What this is: This is a collection of all of my PA/Nylon and similar (PACF) filament profiles for all filaments I've used of this type. I will update it as I tune new filament brands and colors. They are generally tuned for flow rate ,…
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
Polygons with 3d-printed strands as mechanical reinforcements. To introduce stiffness to a polygonal frame multiple triangles are inscribed into the shape, changing rotation with z-height. The triangles themselves are strands of filament…
I really like the little 1x1 case by @ftobler and printed a bunch of them. However, I couldn't resist making a few of my own tweaks to the design. Easier Overhangs - The original model has pretty shallow overhangs on the corners that can…
2x2 version of Zack's nipper holder with the angle of the holders tweaked so they fit inside a 2x2 square. If you have long tools they will still stick out of the 2x2 area but not nearly as much as in the original (which works better in…
We continue with the Spooky Halloween 2024 Series with this wall art inspired by the iconic characters Jack and Sally. This piece features intricate, symmetrical lines, capturing the romantic and eerie essence of the Halloween duo.…
This REMIX Was made to fit an iPhone 13 pro and an iPhone 14 with a standard case. This may fit other iPhone models, but will need to test it at your own risk. DISCLAIMER: Please be careful when ejecting your iPhone. Always have your…
Upgrade your table setup with this Modern Minimalistic Designed Cup Coaster with Holder . The sleek and elegant design not only protects your surfaces from heat and moisture but also adds a refined aesthetic to any setting. The coasters…
You like a clean look and hexagons? This is the place for you :) --- Features & Changes fully compatible and dimensionally identical with original spools removed material for faster and resource friendly printing there are no supports…
Rolling Paper Bench Stand ***Update - Two new versions have been added! There are now three bench designs, the Rocking Bench, the Arm-Rest Bench, and the OG Paper Bench. Try them out and let me know what you think!*** These 3D-printed…
Giganotosaurus scanned with revopoint POP3 Plus and printing resin
'Remix of https://www.thingiverse.com/thing:2156108/ Flattened via MeshLab, repaired and the file with "reduced" in the name is only 47,7 MB big, the other one is 137 MB and a real mess to slice Print Settings Printer Brand: Prusa…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
Why? I needed adapters to mount the Wago 221 series connectors to 2020 AND 3030 extrusions. I wanted them to be modular in size and space efficient. Those adapters are a remix of the following models:…
