765 modeli
This is a basket for the Nespresso pods. currently not printed the model but should be able to fit a good amount into it and you can scale down or up depending on your printer size. Size: 222x222x150
Nespresso Capsule Holder - remodeled
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
Hopper and tamper for use with Nespresso refillable coffee pods Printed in PLA, 0.2mm
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
Replacement clip for the water reservoir of the Nespresso Krups Essenza Mini Intense machine. UPDATE 2022-08-09 Added a version to be printed in ABS, this needed slight tweak to the model. So if your fit is to loose, you can use the…
My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…
standing Nespresso caffee capsule holder 2 line with cut out for easier use.
Box holder for Nespresso boxes that adds a slope to the box, allowing capsules to be dispensed by gravity. Simply place the holder at the end of the box, open it, and pick a capsule the others will follow! :)
A sleeve holder for the original Nespresso cups. With a cutout on the bottom that fits over a strip to keep the holder in place. The strip had holes to put a screw through to fixate it into a kitchen cabinet. Added a two part print for a…
it needs support
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
Small Nespresso capsule holder. Two variants - for 24 pcs (only Part 1) or for 48 pcs (Part 1 and 2). You can remove the cover and fill the capsules into the holder body. Print instructions Printed with Prusament PLA, without supports.
This is a capsule holder I designed to be glued to a the side of a Nespresso coffe maker. It holds 3x5 capsules. Print Settings Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Notes: No supports required, print on flat side.…
I got a first-gen Nespresso machine eons back and immediately printed out some dispensers for the pods. In fact, these were some of my earlierst prints and the first functional prints allowed in the public spaces of the house. So when I…
My wife needed a Nespresso Capsule holder that was small and did not take up much space, so I designed this one for her. She was very very happy with it! This Capsule holder takes 15 standard Nespresso capsules or Nespresso compatible…
My version of a nespresso capsule dispenser. If you need it , print it ! :-) Happy printing. Printing advise: None realy. I used PLA, 15% infill and no supports. For the loop use a brim.
10/26/2022. Updated to include single piece double holder at the request of a user. The new added stl is 293mm long and is not for every printer. After getting a Nespresso coffee maker I found tons of great pod holders for the original…
Nespresso dispenser Print instructions PLA 15% infill
This modernly designed Nespresso capsule holder is simply too good to not want to have at home. It holds a maximum of 21 capsules, stands securely without taking up too much space, and is quick and easy to print (no supports required).…
Nespresso changed their packaging on the virtuoline capsules without warning and made the old capsule holders worthless (the ones that hold the cardboard inserts) so I offer this version that works like the Classicline holders that you…
I wanted to design a stylish capsule holder for my Nespresso machine and came up with this idea. Started to sketch in Fusion 360. Later, i searched thingiverse, if something similar exists already and found this:…
Nespresso Vertuo Capsule Drawers! Inspired heavily by the two models mentioned below, I married their concepts into one amazing Nespresso Capsule dispenser. The pictured product features 4 drawers, but you can print as many or as few as…
For all the nespresso coffee capsules users Print Settings Supports: Yes Resolution: 0.2mm Infill: 15% Filament: Fillamentum Pla Extrafill Category: Kitchen & Dining
Kitchen set part 3 : Coffee capsule Dispenser (Pisa Tower) Make your your coffee tastes more Italia Compatible with all diam. 37mm capsules (Nespresso, Doce Gusto,...) 3 dispensers holes Fill the capsule tower from above Print as many…
Print just the tower part if you want, or if you want rotation, print the two turntable parts also. It uses a 608 bearing. The towers on the original one felt a little flimsy so I added some more structure between them that should fix the…
Turnable Nespresso Tower in two versions: Standard Version to store 42 capsules Extended Version to store 60 capsules Optional Covers There are a few different covers you can choose: blank cover with text: Coffee Time with coffee cup 3…
Remixed model of the Nespresso Capsule Holder from @mibla_44019 Removed the physical supports that were there in the original model since they were not useful and every 3d printers are capable to do the small bridges. I hope it'll be…
You can mount this print under a cabinet with double sided tape or mount it vertically against your wall. When its mounted just slide your capsules onto the “railes” Print Settings Material: Pla Layer height: 0.30mm Supports: No Print…
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
Nespresso Vertuo Pod holder/rails. They are keyed to connect together. Can be mounted vertically or horizontally. The image shown is horizontally mounted on the underside of a wall cabinet - hidden from view. Pods are easily slid in and…
This model was inspired by this design , but slightly more compact and with more options for numbers of columns. I also added some horizontal supports to make sure sure that the holder doesn't bend since the clearances are pretty tight…
Nespresso Vertuo pack holder. Prints in two sections which can be glued together and should hold an entire package of Nespresso Vertuo pods.
Wanted a better spot to put our coffeecups. 6 holes for screws. Size: 230mm x 169mm holds 24 cups. Made my wife actually happy, it might be the reason she allowed me to buy the Prusa XL. Printed mine in PETG with brim.
A quite minimalistic holder for Nespresso capsules. Holds 5x4 capsules. Print instructions Prints without supports as is.
Printed on the BambuLab P1P with extrudr PLA NX2 black I used a standard profile with a layer height of 0,16 mm with an 0,4 nozzle and 15% infill. On the photo you can see that I forgot to add support elements at the bottom of the…
This is a square version of my Triangular Nespresso Capsule Holder ( https://www.prusaprinters.org/prints/20307 ). This capsule holders takes 20 Nespresso or Nespresso Compatible capsules. Print instructions This can be printed at any…
My remix of http://www.thingiverse.com/thing:341809 Don't forget to like the original if you like this one! :) Print Settings Printer Brand: MakerBot Printer: MakerBot Replicator (5th Generation) Rafts: Yes Supports: No Resolution: 0.20…
TL;DR : Recycle your Nespresso capsules. Easily, safely, hassle and mess free. Quick guide on how to use it: https://www.youtube.com/watch?v=yUxY0kESfBE (The unit featured is a prototype. Uploaded version have size adjusted propelly).…
This new bigger model is designed for new nespresso capsules. There are 3 sizes. This was designed for EU market (Czech) - maybe there are other sizes.
Remixed from another model on Thingiverse, I made a number of small changes to improve on the design. This model still uses the original top part for the drip tray. In the previous design, drips would be trapped in between the tray cover…
Description Transform your coffee corner with this innovative Expandable 3D-Printed Nespresso Capsule Holder , designed to grow with your love for Nespresso flavors. Crafted with functionality and elegance in mind, this modular storage…
This is a capsule holder for the Nespresso Vertuo capsules. The assembly is made using an M8 bolt and nut as well as a 608 bearing and 8 4x1.5 magnets. I paused the print to place the M8 nut and magnets as shown in the last couple of…
A Nespresso capsule organizer which can be attached to a wall or ceiling surface. This is a small variation from an existing model. I wanted to have an indentation to place a two side tape to make it “Invisible” This is a remix of…
Capsule holder remixed from this one without most of the back side, so it shows more of the machine color and uses way less material. Can be glued directly or using properly shaped double sided tape. Thanks Peter for the original design…
I corrected the mirrored logo on the right side. The logo insert is in a separate file now. I made versions for 2, 3 and 4 tubes. Many thanks to Luis for that great model! 👍
If you are looking for a Nespresso Vertuo Pod Holder that lets you store and sort your pods in a stylish and convenient way, you might like this model. It is designed to fit all sizes of pods, unlike many other holders that only work for…
Capsule holder for nespresso vertuo. It only has 1 side open, holds up to 6 capsules, but you can scale the length to get more or less capsules and make it fit for your needs. mine fits perfectly under an ikea wall cabinet.
Requires to be printed diagonally on a large format printer (300mm x 300mm).
Bought the Nespresso Vertou Pop and found that a normal coffee mug could not fit under the dispenser. This platform raises the coffee maker to accomodate normal mugs. Remove the cup drip tray for iced coffee drinks. I used 5mm rubber feet…
This is a remix, but it's been 2 months and I'm now unable to locate the source of the file I downloaded. Apologies to the OC. I'll update the post if I track it down. These holders are big. I can't print larger than the Triple on my…
I have created it because the other dispensers were consuming a lot of material, and they didn't work for all types of capsules. I had to make several models to get it right. .You can print multiple dispensers and join them with the…
This is an alteration of pumikachu's Nespresso capsule wall holder light to support magnetic attachment. I also did an adjustment to the bottom part for ease capsule release. Designed to use neodymium magnets with 6mm diameter and 1.5mm…
Altered an already good design to make it modular using dovetail joints. Each dispenser comes as a pair. There are two different sizes to address varying carton dimensions - 61mm x 60mm and 61mm x 65mm (No idea why Nespresso they did…
Two file build, with the grate simply sliding into the tray, no intense assembly required! Remember that coffee is hot, so please consider which filament you are using for the print. ASA/ABS or PETG should hold up better for this…
https://www.buymeacoffee.com/articpanda Just a 2 Inch riser to for the Nespresso Vertuo Pop+ (not an ad). My wife bought this and my cups didn't fit under it so I just made a riser! Printer upside down as Cura image shows Feel free to…
This is a multiremix of: https://www.thingiverse.com/thing:4777591 https://www.thingiverse.com/thing:2813393 https://www.thingiverse.com/thing:3090239 https://www.thingiverse.com/thing:593717 A full combo for wall decoration Nespresso…
This drawer fits underneath a Nespresso Inissia machine, specifically the one made by DeLonghi (once upon a time sold at Costco). It may also fit under the other Nespresso Inissia (such as the ones made by Breville or Krups) machines, but…
This dispenser works with Originaline packaging. Just tear off the flap, insert the box into the top and when you turn it back over the pods will cascade into the tray. Edit 6/12/19: Small improvement to help keep box from going too far…
A Remix of the popular Nespresso Dispenser from Luis only takes 2 Nespresso boxes instead of 4.
Small amount of material needed (it's very cheap) Therefore fast printing time (you can make a lot of them) 2 parts to be combined with dovetail (for perfect alignment) Optimized capsule movement through elevated sliding rail (bulge on…
For those who either have less kitchen space, or less taste in coffee…
Der Nespresso Kapselhalter ist gemacht für das Prusa Wooden PLA Filament. Nur mit diesem habe ich eine gute Qualität hinbekommen. Für den Druck beider Teile habe ich die MMU 3 ausgeschaltet und den Extruder direkt gefüttert. Beide…
Holds 20 capsules. Brim required for stability Print instructions 15% fill Update: New version available here https://www.printables.com/model/129039-nespresso-capsule-holder-version-2
We often buy other brands of Nespresso capsules, such as the Jacobs or Omnia capsule in the picture. These are often not packaged in the same way as the original. Thanks to the designer of the original model because it works great, I just…
This is a Vertuo Pod dispenser that holds three (3) separate boxes of pods. PLA at .15 layer height and 15% infill.
This riser will increase the height by 55mm / 2.1" to allow tall mugs and glasses to fit under the spout. Print the model face down, with the hole facing up to avoid support, and flip it over. I added rubber, non-slip coating to prevent…
Building instructions: Step 1: Step 2: Step 3: Step 4:
This design was inspired by other printable models that repurpose the box, but it takes it further by creating a full dispenser that holds up to 10 capsules without needing the box, while also displaying the current capacity. The model is…
Why? Wanted to use my El Arroyo Quotes mugs on my Essenza Mini Nespresso machine. Designed with Fusion360 How to print? STL files are oriented as they should be printed The “top” part needs supports around the lip Use black PLA, consider…
print lid in place use 4 walls, 4 top layers, 4 bottom layers, 30%+ infill recommend petg filament fits neat and snug Don't forget to upload pictures of your makes I love seeing your prints of our creations :-)
At the request of a biker friend, I designed a Nespresso capsule holder that allows you to carry 6 capsules and protect them during the trip. The model is printed without supports, I printed the cap in TPU. ----- À la demande d'un ami…
☕ The original Nespresso Vertuo Pop drip tray was too small in diameter and too high to fit my Starbucks “You are here” mugs meaning we had to use it with the drip tray removed and that left drips on the kitchen countertop, or we had to…
A carousel to organize all the Vertuo pods for Nespresso. Uses threaded shafts allowing shafts and discs to be joined to create multiple levels. To create a four-level carousel, as shown in the picture, print the following components -…
Nespresso Vertuo Pods Holders This is to be printed on a 300x300 bed as 200x200 bed are just too small and impractical, should be able to store around 20 vertuo pods. Voron pif setting no need support
Modular Nespresso Capsule Stand I designed this practical and stylish stand for Nespresso coffee capsules, which you can easily print on your 3D printer. Key Features: • Capacity: The base module holds 30 capsules. With its modular…
After seeing multiple options for opening my nespresso vertuo pods online that required razor blades I decided to design one that didn't need them as I was a bit worried about safety. My Printing Settings that worked fine (my default…
Redesign of a cabinet door rack for Nespresso Vertuo Pods. I designed it to mount vertically so it would fit within the recess of the cabinet door. I left the design more angular (vs. curves) so it would print cleaner without supports. It…
Simple Nespresso Vertuo pod holder for re-loading pods with your own coffee. There are multiple suppliers of the foil stickers used to close the pod, and I've found this to be a great way to recycle the pods while changing up what coffee…
This is a re-creation of antohneeo's nespresso capsule holder so that I could add dimples for magnets for attaching to my fridge. It's also parametric so you can make them any dimension you want. I also stole the idea of leaving a space…
A compact stand for Nespresso® capsules boxes based on the m4uli design ( https://www.thingiverse.com/thing:601422 ). I made the walls a bit thinner for less plastic use and faster printing. There are both single and double-sided models…
Big thanks to BastR for allowing remixes!
Wall mount for Nespresso KRUPS Essenza Mini....
This sleek and durable Nespresso Original Pod Holder is capable of displaying over 50+ pods with as small as a footprint as possible! With no sacrifice to convenience, the pods easily slide out from the top keeping you caffeinated all…
Nespresso coffee capsule cup holder made smaller to fit Ender 3V2 build volume.
Coffee capsules are increasingly common and easy to use, but they are very complicated to recycle. The capsule opener is an easy way to separate the coffee from the aluminum. We recycle for a greener world!
Low profile Nespresso essenza mini drip tray. This will allow usage of taller, normal, coffee mugs with this excellent machine. Support are needed for the back “hook” , I suggest to use Normal, Snug . My pictures show the base printed…
Edit: 2020-06-28 : Added indents to make it easier to use when cutting. After doing like 1000+ of these its the only thing missing. I've left the other one in case you like that, and updated the F3D file too. Should still print without…
Use this spoon to measure the volume of instant coffee you get from one stick. I printed this part in PETG, with a 0.6 mm nozzle. Update: added a spoon with a longer stem.
This is a coffee pod holder. It holds coffee pods vertically and dispenses them from the front of the model. There are many folders for different versions of the model - 40ml holds Espresso pods. 80ml and 150ml holds Double Espresso and…
Nespresso tower for 32 pods on the outside, and a few more in the interior section if needed. Measures 125mm x 125mm, Height 200mm
Tool to assist with recycling Nespresso Vertuo Capsules/Pods at home. Uses readily available 9mm snap off blades (Example: https://www.screwfix.com/p/9mm-snap-off-knife-blades-10-pack/6344v) Optional push fit top piece relies on a…
Print it, glue it. Print Settings Rafts : Doesn't Matter Supports : Doesn't Matter Infill : 17%
Printable also with 150X150X150 printers. With layer 0,2 the print time is 18h, but i think 0,3 is sufficient. Category: Kitchen & Dining
Rotating capsule holder for nespresso cups No additional items needed Printed at; 200C hotend 50C bed 0.28mm layerheigt No supports
