121 modeli
Also fits at least older IKEA desks with table tops of the same thickness (~19mm) Added a blunt version of the hook that prints without supports. Works fine with clothes hangers.
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Secret Bookcase: Hide Your Miniature Superhero Costume Overview Introducing the Secret Bookcase—a quintessential piece of dollhouse furniture with a twist. Designed for secrets, this fully functional bookcase swings open to reveal a…
Wydruk około 12,30 €–15,03 € nettoWstępna wycena jednego wariantu
If you're like me and annoyed that the BILLY bookcase (and extension unit) is 4mm too narrow to fit exactly three full-width modular houses side-by-side… be frustrated no more! This is a set of parts forming a 5mm extension to widen the…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is the 3D-Model notebookcheck uses to test and review FDM(FFF) 3D Printers. With a base of only 66 mm x 66 mm, it can be used to find multiple quality issues. Integrated are tests for the build plate adhesion, extruder accuracy,…
Biseokchigi , in English Flying stone , is a game played in the 2nd season of Squid Game.
This is yet another bookcase overlay tile replacement for the board game Gloomhaven. Tile Count: 4 Original non-commercial version here: https://www.thingiverse.com/thing:2758101 Print instructions Supports: No Resolution: 0.08mm Infill:…
I wanted to spruce up my bookcase doors with some nicer doorknobs, so I whipped up two different versions in Fusion. Screws in easily and grabs the scew well. I would recomend to print these with atleast 4 walls, so make sure the inside…
Made these when I couldn't find strong enough manga/book risers for my use in my IKEA BILLY bookcase. I wanted to have an entire row across the back risen high enough room to read the titles (6cm high). I also wanted rows across the…
Upgraded Little Tikes Dream Machine Book Case to fit some of the taller character figurines.
I used: No rafts or supports 15% infill .2 If using a lighter color filament (I used white PLA), might want to add a couple outer layers. In mine, you can see the infill through the print.
I figured the Tiny Secret Books needed a home. A nice, metric, 10 books can fit tidily inside. Print Settings Printer: Monoprice Maker Select Ultimate Rafts: No Supports: No Resolution: 0.2 Infill: 0% to 20% Category: Model Furniture
This is a replacement shelf pin/peg for the latest version of the Billy bookcase from IKEA. We recently moved and lost the pegs for ours. With the IKEA being a bit of a drive, I just printed out a new set and called it good. The plastic…
This modular system allows you to display your games and media front facing with laser alignment along the Ikea 31" Billy Bookcase. The alignment edge is recessed approximately 10mm from the front edge of the bookcase, giving you that…
A classic wooden bookcase, perfect for filling out wizard towers, cozy libraries, alchemist labs, or castle studies. This versatile piece of scenery adds life and detail to any tabletop interior. This object is intended for resin…
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the…
My two Billy bookcases, annoyingly, would not stay together so I made a simple bracket to hold them to each other. The brackets stay in place through friction and the fit can be made tighter by adding folded paper behind the bracket. You…
Important: pause at about 7mm when printing the frame to insert two M4 nuts as they are dropped into the cavity and then enclosed in the print This is a frame and stand for the wandering clock model:…
This is a bookcase. Designed for Gloomhaven. It can be printed without supports.
This model is compatible with the lego system.
This is a single print model based on the IKEA BILLY bookcase in 1:12 scale. Since this model is printed all at once, the shelves are unable to be moved once printed. This print requires no supports when printed back down. If using white…
Bookcase/alchemy shelf for miniature lovers. Dimensions shown in pic. I made this to fit with something else, that's why the size is a little strange. I personally used a 0.25mm nozzle and 0.12mm layer height with this. No supports/brim…
Halloween themed 6 tiered Mini Bookshelf in the shape of a Coffin It can hold 22 mm tall books and 16 mm deep
V3 increases structural integrity but uses more filament and allows for 5 games to be stored. Printer: Bambu Lab P1P Filament: Overture PLA+ White
Modular bookcases for DnD and other TTRPGs. There are multiple versions. The 25mm versions fit exactly on a 25 mm/1 inch grid, the 28mm versions are less flat. The inserts fit both in the bookcases aswell as on top. It is FDM friendly. I…
Customizable Tiny Bookcase This is a customizer for creating tiny bookcases for storing tiny secret books. Included are STLs for a 3-shelf bookcase for storing microSD card sized secret books, a 2-shelf bookcase for storing SD card sized…
Designed to fit standard 124mm x 10mm wide jewel cases.
A Miniature bookcase for my Haunted House project which i am making with my 3D printer and Arduino.
if you have older style Billy bookcases , the new oxberg glass door dont fit. this template helps setout new holes which you need to drill holes ctrs from top of door ( mark on bookcase) 95mm, 1055mm, 1822mm
Designed to match my Tiny Mission/Craftsman Side Table and Mission/Craftsman Chair (which you can see in some of the pics), this Mission-style bookshelf makes a nice addition to this miniature living room set. It ought to suit your…
A small, filament efficient cover to make the adjustable holes in the IKEA Billy bookcase blend in better.
This is a 3D printable 5mm shelf peg (also known as a cabinet shelf support pin ) designed for standard 5mm predrilled holes found in cabinets, bookcases, and modular shelving systems (including many IKEA-style furniture pieces). It’s a…
A basic bookcase created as scatter terrain for TTRPGs like Dungeons and Dragons, Pathfinder, etc... Feel free to use this commercially citing Adventure Pages as the artist/designer.
2/25 update: added a new bracket for 5/8 inch rod =============== This is my shelf bracket remix from macmanluke's work to use existing peg holes in Billy bookcase for 1/2 inch rods with topside open so it can hold 5 spools easily for 15…
A wooden bookcase for your models. Can be printed out as prop on your ttrpg table, or added to you own model.
- Superglue recommend - Commercial license available at: https://www.patreon.com/cw/MonochromeDesignDE
Just a real size model of IKEA BILLY that i created to make wall connection so needed it to model after. Model from measurement of IKEA+real life measurement, I did not add the odd variant of shelf holes but the basic ones should be…
Printed in petg, recommended A hook designed for a friend for hanging art on an ikea billy bookcase and some other ikea bookcases. Apparently, its trendy! Who knew!? I'd suggest placing a large book on the clip itself to keep things from…
We have a some Billy bookcases set up as lockers and I was looking for a way to hang keys in them without damaging the bookcase. A didn't see anything like I was looking for so came up with this quick model. There are 3 different…
I liked grizziel17's model, it's very simple and designed to print without supports. Note: this is for a custom cut shelf to fit an IKEA Billy bookcase, it is not meant to be used with IKEA shelves with the round cut-out for the IKEA pins…
I recommend printing with 3 shells and extra infill maybe 20% so its sturdy and can take a beating. I printed in PLA with no issues. If you make this item Id love to see what colors you use and what you use it for. Thanks for checking it…
Wasn't happy with the brackets that came with the book case to connect the book cases together at a 45 degree angle. I designed these to be added to the back of the book cases. Drill some holes through the shelf (I lined them up so that…
A simple and customizable tool to increase the number of peg-holes for shelf carriers or.... The standard entered values are for an IKEA Billy bookcase (STL's included). Of course these can be adjusted to your own wishes. A few remarks:…
This is a new introductory set of 20mm dungeon tiles along with the new Mag-Neat-O magnetic base system. Let me know how they work for you. The tiles are compatible with Print-A-Blok but printed at 125% original PAB size.
keep your books stored in style with this mini bookcase custumize it if you want ant have fun with this mini library you fint the mini books here: https://www.printables.com/model/767891 Print instructions add an aditional outher wall for…
Sided plugs that turn your shelving units into shoe storage. Each plug is chamfered to provide some tolerance for the angle of the shelves. Printed with 0.4 noz @ 0.20 layer heights without supports
An idea (read the full description first) of a hinge that can be used in a recessed space in the wall to mount doors flat with the wall and open the door to more than straight angle so that the space is not obscured when the door are…
I wanted to mount a Blink Mini Pan-Tilt to a Billy bookcase, but wanted to offset it so it could see more of the room. Here is the result! There are two arm options - one is straight, the other angled. If your Billy is closed to the wall…
This is an adjustable wall standoff for securing a bookcase to the wall. Adjusts from 25 to 40 mm (1" to 1.6") in length. 32mm (1.26") wide. 15mm (0.6") inner hole for the screw. Originally designed for securing IKEA KALLAX shelf unit.
the colours are to be coloured by the layers. Good luck
Just a real size model of IKEA BILLY that i created to make wall connection so needed it to model after. Model from measurement of IKEA+real life measurement, I did not add the odd variant of shelf holes but the basic ones should be…
Easy to print, will support 10 mm LED strips (molded up to 3 mm thickness). Can be used to light the wall, ceiling, environment or to illuminate the entire shelf from above (top down). Alternate version available for lateral clamping in…
This allows for the Plano Stowaway 3700 tackleboxes to be hung in the 15 ¾" (40cm) Billy Bookcase using the pin holes. I have mine spaced every 2 pin holes and it gives the perfect spacing. Print as oriented with organic tree support on…
I made this model for my own needs. You can have as many sections as you want by increasing the number of parts. In general you can do this with pla. I added soft material parts to the parts in contact with the ground, so that the model…
Insert and organizer for the 3M bookcase editions of Acquire.
The hangers uses the original metal shelf pegs. You'll also need two 23mm rods for each shelf. They should be cut at 745mm long. I bought broom rods and cut them since it was cheaper than buying 1M rods. One Broom was ~4-5eur and enough…
Default raise value is 5mm but can be adjusted in the fusion file.
This clip help you to hold your book closed in every situation. You won't loose your page either with the integrated bookmark. You need to print it in a pretty flexible material (not too flexible either) to make it easy to use. This…
Cathedral Board Game – 1980s Bookcase Edition 🏰 Bring a classic strategy game to your collection with this Cathedral Board Game – 1980s Bookcase Edition ! Inspired by the classic Cathedral board game, this 3D-printable project is a great…
Here's a friction-fit clip I printed to hold up garland along the top of my IKEA bookshelves. Printed in while TOUGH PLA and 0.2mm layer height with cubic infill.
I needed a shelf holder for my bookcase SO I made this. I used Solid infill PLA .16mm layering tree supports Probably would be more strength if made of PETG
Orc - Book holder- Bookcase
Created in OnShape. My first piece of Dollhouse furniture. Please comment and like.
A bookcase mounting peg I made by slicing up a lot of different things and putting them together as I needed. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: FormFutura rPET…
I remixed my original design to look a bit better. In my bookcase I have some pothos plants, so I thought to make the design of a pothos leave. It fits on shelves that are 20 mm wide. Has a version for horizontal and vertical! Added two…
Replacement part for a barrister bookcase. Not sure original manufacturer. If anyone knows the name/maker of the part/bookcase, I can update the listing.
Simple phone holder for your bike modified to fit bookcase type phone cover
I remade the bookshelf. I included the book and pages to print and create the book.
I'm sick of dust getting into my bookcases, so I installed acrylic sheet doors on them to keep it out. I've added the handle and magnet holder files I used to keep the doors shut. Hinges- 0.2mm layer height, 0.4mm nozzle, 50% infill,…
It's mini, it's a bookcase, and the top looks like Harry Potter glasses.
Little bookcase for my bookcase (three colours) 240 mm x 15 mm stencil: 240 X 1 mm
A simple organizer for A Place for All My Books (Bookcase Deluxe Edition). Not sure if the other versions are different sized boxes, but this is designed for the bookcase box with an inner dimension of 218mm x 268mm and accommodates card…
Etagère de présentation et de butée pour manga. Adaptée aux meubles IKEA. Etagère très solide grâce à sa forme étudiée pour supporter les charges. Butée de renfort permettant de maintenir en place des mangas sur le devant et de surélever…
Here is a bookcase that will brighten up your own bookshelves. The STL file contains the parts I have designed myself: the bookcase; the drawer and its handle; the back panel; the books; the candlestick; The .3mf print profile is provided…
The main purpose of this build was to have a space to hide my modem and router setup while still being ventilated. This four panel IKEA pegboard fits snuggly into the BAGGEBO IKEA bookcase. It uses several snap fit pin joints to connect…
Hey there tribe, I have designed for you today a hook for the IKEA Billy bookcase so that you can hang things from the selves or from the body of the book case. This is my first try at an IKEA hack. Here is our Sunlu Affiliate link…
this is a hook protect for ur fishing lures, they can clip ur hooks to protect ur road or even urself. They can clip himself or being holded by ur road to avoid hook anyone
This is a jig for marking the hole for mounting a 28" IKEA Översidan light to the 31.5" Billy bookcase shelves. It centers the light on the shelf when aligned with the edge of the shelf and marks the hole at the correct depth. DOUBLE…
I was using IKEA Billy bookcases in my office and put 3 side by side, and wanted a way to connect them to make them more sturdy. Yes I could have gone out and bought a metal plate that was pre-drilled, but I have a 3-d printer, so I just…
This is a cable hanger custom-fitted to clip onto the edge of a bookcase shelf. Each hanger is 3" wide and has 4 slots that are 0.18" wide by about 0.75" long. It will clip onto a shelf that has a front lip 2.0" high by 0.75" thick. With…
Print in spiral vase mode, ideally with external-perimeter extrusion width of exactly 1.0mm. Solid bottom layers must total at least 1.0mm.
Wasn’t this the ultimate stacking game? This was a dorm room classic back in the day. I had plants and books and soda cans and pictures from home on mine back in the day, stacked on top of my bed’s bolster. It’s fun to create your own…
Printed with PLA, 4 perimeters and 40% Grid infill, which may be a bit of overkill but I didn't want to chance the grip from pulling away from the cylinder. The existing screws went in smooth, firm and tighten up nice. I should have made…
This is a bracket for the Stella Athena dresser and bookcase combo for those mounting the bookcase onto the dresser. For some reason the hardware for this was not included so I made this in order to keep my daughter from eventually…
For short rests and more comfort. Version 2 is here…. and give more comfort for the head :) Print: Printer: Creality ender 3 S1 PRO Filament: TPU A85 (215 degrees celsius Infill: 10-20% Support: Yes Print speed: 50 mm/s
Formula 1 Logo Wall Bookcase You can buy me a coffee if you like. https://ko-fi.com/budos Inspired by the Formula 1 logo, this wall bookcase is not only designed to display your books, but also to add a strong character to your living…
I've followed this FreeCAD Tutorial - Basics - Chess Rook tutorial to trace the shape from a photo of another door handle. Some kind of tutorial is absolutely necessary for FreeCAD; the way the editing modes work in that software is quite…
The case holds about a dozen copies of Our Daily Bread.
A hanger that clips over the sides and shelf of an Ikea Gersby bookcase or other bookcases that have a 15mm shelf. There are left handed and right handed hangers. Printed with a 0.2mm layer height. No supports required. Update 25/01/25:…
Print settings 0.2mm layer PLA material Printable on Prusa Mini (but part by part) Some books needed as a burden Assemble Print left and right part May be connected together by 10mm wooden round profile Some part may be printed from flex…
Printed @ 100% infill, seems strong enough but probably wouldn't load with lead weights! Print Settings Printer Brand: Wanhao Printer: Wanhao Duplicator i3 Plus Rafts: No Supports: Yes Resolution: 0.1mm Layer Height Infill: 100% Category:…
A simple replacement rail for certain barrister bookcases. If your existing rails look like this one (albeit broken!), hopefully this will help you out. When putting the doors back on, I found it helpful to put the rear screw in first (on…
A bookcase for the special edition of the Maxton Hall trilogy by Mona Kasten
My practice area for guitar is in our living room, with the amp-modeller etc behind a baby gate to protect from an inquisitive toddler- which doesn't leave much space for a music stand. There is a Billy Bookcase though, so I designed…
