Wyniki wyszukiwania: p400

Sortowanie

Liczymy pasujące modele…

P
PrintablesFiteropp

Print-in-place 1/50 Lamborghini Countach LP400

Print-in-place Lamborghini Countach in 1/50 scale No supports required Reccomended layer height is 0.1 - 0.15 mm I reccommend setting bridges speed to 10mm/s Enjoy!

Pobrania
258
Polubienia
48
Ocena
0
P
PrintablesDaniel

Channel knob compatible with MOTOROLA DP4001EX

This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…

Pobrania
171
Polubienia
7
Ocena
0
P
Printablesjeff

nvidia p400 low profile bracket

This is a low profile bracket for a p400 gpu. The mounting screws cut threads into the plastic. Fit is pretty decent. Print with supports as shown. I set the model to be solid throughout (0 infill) to get it as stiff as I could.

Pobrania
151
Polubienia
14
Ocena
5
P
PrintablesDeBeard

PC REAR EXHAUST VENT FOR PHANTEKS ECLIPSE P400 CASE

Redirect the airflow from your PC's rear exhaust fans upwards and away from the wall. The purpose is to expel hot air in a direction that prevents it from circulating back into the case through the lower slots. Originally designed for the…

Pobrania
145
Polubienia
26
Ocena
0
P
PrintablesJosé Pedro

Lamborghini Countach LP400 | 1:50 Kit Card | No Supports

Build your own 1:50 scale Lamborghini Countach LP400 from a 3D-printed kit card. Print the card without supports, separate the parts from the frame and assemble your miniature Countach. Keep it on your desk, add it to your car collection…

Pobrania
142
Polubienia
41
Ocena
0
P
PrintablesPhanTom

Siemens HMI KTP400 panel with reader

Box for Siemens KTP400 HMI panel and proximity card reader. ITEM aluminum profile bracket included. It contains three sets - custom box, back and holder parts. Print instructions výška vrstvy 0.2 mm, výplň 20% GYROID, materiál PETG.

Pobrania
120
Polubienia
4
Ocena
0
P
PrintablesJonasz Potoniec

nvidia quadro p400 high profile bracket

High profile bracket for Nvidia Quadro p400. The mounting screws cut threads into the plastic. First wanted to add nuts, but I don't think it is needed. Embedded cylinders for extra rigidity, it really helps with holding GPU in a place…

Pobrania
111
Polubienia
6
Ocena
5
P
PrintablesEL BARTO

Lamborghini Countach LP400S

First advice-not props. With them, there is a high possibility of tearing off the spoilers, not to mention the need to clean them after printing. Second advice-only PLA. I printed from PETG (I didn't have a black PLA) and the wheels…

Pobrania
109
Polubienia
6
Ocena
5
P
PrintablesCarDesignLab

Lamborghini Miura P400 (1971)

Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!

Pobrania
95
Polubienia
15
Ocena
0
P
PrintablesYuwi

Phanteks SSD mount P400A

A easy to print mount for the Phanteks P400A (might work with other Phanteks cases) No supports needed, use original screws from the case and route the cables from the Fans on the front. disclaimer: might not fit exactly as I made this a…

Pobrania
75
Polubienia
5
Ocena
0
P

Front Panel Modification for Phanteks Eclipse P400S

Print instructions: Printed with PETG. Infill 15-20%. Print the thread and nut without support . For the dust filter I used PVC sheet, 0.45 mm thickness with 1 mm holes , fixed in place with super glue This is an unofficial,…

Pobrania
71
Polubienia
5
Ocena
5
P
PrintablesJanProsa
Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesGhostCell

Phanteks Eclipse P400 foot replacement

the foot of my PC Case broke while moving it, so i recreated a replacement. I think it could mirrored to fit the other side.

Pobrania
55
Polubienia
0
Ocena
5
P
PrintablesRappolt

6in Duct to Phanteks P400A Top Radiator Fan Grille Vent Shroud

Print two. A hose clamp will hold them together, so the seam only needs glue or tape to seal. Fitting the duct on is very snug. Made with 0.4mm increments in mind for 0.4mm layer heights.

Pobrania
51
Polubienia
5
Ocena
0
P
Printablespepson

Kobra Go PSU (Chengliang P400W24V) Hex Cover for Noctua 6025

I made an extremely unnecessary upgrade to my Kobra Go PSU to make it quieter at idle and fit a noctua 6025. I'm a Noctua fanboy, and this fan at 12V gives almost the same CFH as the stinky one that was in there already. I just cut the…

Pobrania
45
Polubienia
3
Ocena
5
P
PrintablesJosé Pedro

Countach LP400 Shell STL File – Futuristic Supercar Reveal 3D Printable Model

Presenting the Countach LP400 Shell, a striking 3D printable model of the legendary Italian supercar, elegantly concealed beneath a dark, flowing cloth. This model is designed to evoke excitement and anticipation, perfect for showcasing…

Pobrania
32
Polubienia
5
Ocena
0
P
PrintablesNilsMatthias

Lamborghini Miura P400 SV

Lamborghini Miura P400 SV as a 3D Model. This design can be scaled to any size in your slicer. Print flat with ~5% infill to save material. Perfect as decoration. Category: Signs & Logos

Pobrania
28
Polubienia
1
Ocena
0
P
PrintablesSonorrow

Case for Casio FX CP400 calculator

Case for Casio FX CP400 calculator with space for felt padding. Simple design with closure, you can open the box by lightly pressing the bottom part and pulling the two parts apart. After the 3mm thick felt is glued in, the calculator can…

Pobrania
26
Polubienia
2
Ocena
0
P
Printablesblmak

up4000 cover

This is a cover to protect the electronics from the up4000 boards, its held by two of the screws that held the heat sink. Just unscrew them, place the cover and screw them back again. I printed it horizontal with support on the base for a…

Pobrania
25
Polubienia
0
Ocena
0
P
PrintablesAtlet

AMPP400 Garmin mount

Mount for CatEye AMPP400 front light under Garmin.

Pobrania
23
Polubienia
0
Ocena
0
P
Printablescyllenius

BOX for foamcutter P400 - Polyshaper

Customized version of http://www.thingiverse.com/thing:1264391 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing\_id=1264391 This is a container for the GIPAT P400 foamcutter on Kickastarter. Enjoy and feel…

Pobrania
23
Polubienia
0
Ocena
0
P
PrintablesBEmeow

Phantek P400 / P400A drive cover

This model is a cover for the inside of the pc case of the series Phantek P400, P400a and P400i. they may also work on som other versions of phanteks cases, but unknown which. The cover is ment for hiding away some holes that can be used…

Pobrania
23
Polubienia
5
Ocena
0
P
PrintablesMakerPy

Phanteks P400 raised feet

These feet raised your Phanteks Eclipse P400 case off the ground, which helps if you have carpet. You'll need two of each model to raise your case off the ground. I printed mine with 3 walls and 20% infill. This might be excessive for the…

Pobrania
20
Polubienia
6
Ocena
0
P
PrintablesHenk Lol

HDD carrier / drive bay Intel P4000 series chassis

The p4000 server chassis came originally with many proprietary attachments to simply slide into the front cage. However, they are no longer produced and hard to find for a reasonable price. These slides are originally made of metal, but…

Pobrania
20
Polubienia
2
Ocena
0
P
Printablesesm

FT EMS mounts for Chengliang P400W24V PSU

The power supply that came with my Anycubic Mega SE is one of several variations of the Chengliang P400W24V, a 400W 24V power supply. Because I switched to dual-Z, I wanted to relocate it from it's stock location behind the gantry…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesFerrariGuy

MA-03074 / 001303074 Lamborghini LP400, Miura, Islero, Espada Fuel Tank Filter

The in-tank "Salva" brand fuel filter of a number of classic Lamborghinis (and possibly Ferraris) is utterly NLA, or in the hundreds of dollars. The sensible thing to do when refurbishing a fuel tank is probably to use a modern push-on…

Pobrania
14
Polubienia
0
Ocena
0
P

IKEA Samla mount on a miditower: Phanteks P400

Hello! This model is for a stand to put your favorite IKEA Samla 22l box on top of your computer case. There is a parametric F360 file so you can make it suit your needs. The parameters for the computer case are marked as favourites in…

Pobrania
12
Polubienia
1
Ocena
0
P
Printablesvemsom

Jonsbo HP400S 120mm fan shroud

120mm Fan shroud for Jonasbo HP400S cooler. I use my motherboard horizontally, pressfit works fine. For vertical mounting you might need to be creative.…

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesMorten Borge

Nvidia Quadro P4000 80mm fan converter plate

This is a replacement plate for Nvidia Quadro P4000, to add a 80mm fan to replace the blower fan. Be sure to use a high static pressure fan, I have used Artic P8 slim pwm pst. This is a 15mm version and perfect for this. Other 25mm…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesGLaDOS Aperture

Casio FX-CG500/FX-CP400 Stylus

A stylus for use with Casio FX-CG500 and FX-CP400 calculators. Note about printing: The provided .stl and .step files are based on the actual stylus dimensions, and will be too big to insert into a calculator. It is recommended to scale…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesMatt Dean

Jump Kick(er) GP4000 strap cradle v2

Free STL and STEP files for a strap cradle made for a measured 228 × 99.5 × 38 mm GOOLOO GP4000 jump starter. Built and printed for the BYOBoom Jump Kick(er) boombox. The jump pack remains removable. FIT AND MOUNTING Outer envelope:…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesLUF3DBRG

Touchscreen Cover KTP400

Protection cover for Cover touchscreen or other tipe of screen. Made for a siemens KTP400 but can be adjusted to other screens. Frame Printed with support for the sliding cover.

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Countach LP400 Shell STL File – Futuristic Supercar Reveal 3D Printable Model

Presenting the Countach LP400 Shell, a striking 3D printable model of the legendary Italian supercar, elegantly concealed beneath a dark, flowing cloth. This model is designed to evoke excitement and anticipation, perfect for showcasing…

P
Printables

SnowPeak cp400 mp512 rear sight

cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.

P
Printables

Lamborghini Miura P400 (1971)

Model with true aspect ratios. Ideal for hanging on the wall, all in one piece. 200x3mm. Collect all the CarSilhouette!

P
Printables

Channel knob compatible with MOTOROLA DP4001EX

This is a repalcement channel knob compatible with the MOTOROLA DP4001EX radio. The knob is compsed of 3 pieces the exterior printed in PLA, and the interior printed in PETG. I used the PETG for the interior because is stroger and less…

P
Printables

SnowPeak cp400 "anatomic" grip v0.2

Disclamer. I don't know what i'am doing. Work in progress. "Anatomic" grip for cp400 pistol

P
Printables

SnowPeak cp400 mp512 rear sight

cp400 mount for mp512 sights Windage ajustments from mp512 sight. Elevation ajustments is jank. Just position the sights accordingly. No clicks. But is works. Print on the side with tree supports.