574 modeli
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
Wydruk około 8,89 €–10,87 € nettoWstępna wycena jednego wariantu
This is just test Gcode, for more info (userguide) please look at: https://3dlabprint.com/shop/p51-d-mustang/
Wydruk około 8,64 €–10,56 € nettoWstępna wycena jednego wariantu
DISCLAIMER: Airsoft part only, utterly useless in any real firearm! It started as a joke, then became a bet and in the end turned into surprisingly working project: Someone offered me an MP5 hi-cap he had no use for, and i wondered, if i…
Wydruk około 4,99 €–6,10 € nettoWstępna wycena jednego wariantu
Everyone who owns this wireless charger from Samsung certainly knows this problem. You finally want to sleep in the evening and put the phone on this charger without looking... And the next morning you realize with fright that the phone…
Wydruk około 2,30 €–2,82 € nettoWstępna wycena jednego wariantu
Originally I was unable to align the front stop of the original grip with the end of my handguard due to the placement of the screw holes. I've added a section with a screw hole to the back so you can have more freedom aligning it on the…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
MP5 keychain made in Fusion 360.
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Hello, I have an Airsoft Grenade Launcher for Mp5 and others for you. The grenade launcher is specially designed for Mp5 to look like from Half Life 1 or Black Messa . The grenade launcher is fully functional for Airsoft grenades. It is…
Wydruk około 16,55 €–20,23 € nettoWstępna wycena jednego wariantu
Hardware Two small pins, I used a sewing needle cut down. Two small springs, about 4mm diameter. (One for the mag catch and one for the BB stopper) One BB Printing Print on the edge as shown in the photos. No support needed Assembly Put…
Wydruk około 5,10 €–6,24 € nettoWstępna wycena jednego wariantu
A tool used to hold the bolt of a field-stripped .22LR HK MP5 open while cleaning. A more reliable solution than using the internal bolt catch — no more bolt bite on your poor little fingers whilst trying to clean your dirty girl! The…
Wydruk około 0,52 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
HK MP5 - wall art - keychain Scale it to your needs Happy printing!
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
This is a simple magplate that i made for my Mp5 mags to make it easier to grab while in the heat of the moment. I have also included a version without the handle if you just want to replace the normal one. For printing i would not…
Wydruk około 0,76 €–0,92 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For using the G&P flashlight handguard on the WE Apache MP5 (Should also work with the VFC but not tested). print side on. Mine doesn't look very good in the image but that was due to multiple attempts to glue random things in there…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
There is room for a small-ish O-ring to help tighten up the fit with the receiver but I tried it without and it wasn't much worse so might not need it Just fits into the receiver and then screw on the front sight post. The TPU version…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Hello, Today I have an Airsoft Mp5 muzzle brake for you. This is the version for the Mp5 Cyma submachine gun. It is a compensator for the end of the barrel. It fits very nicely and is completely complete. At the end of the compensator…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
Hello, Today I have an Airsoft Mp5 compensator for you. It is suitable for the Mp5 from the Cyma brand, but it should also fit other brands. It is a quick-release compensator, so it is installed over the original diffuser and locks with…
Wydruk około 1,72 €–2,10 € nettoWstępna wycena jednego wariantu
Updated to : ver. 2.2 . Some improvment. Added vent holes. Vertical tabs reinforced. After use and clean of our Waterpik water flosser, a stand is needed for driyng and placement on shelf. The openings at the bottom is for air circulation…
Wydruk około 3,77 €–4,60 € nettoWstępna wycena jednego wariantu
This is a 3D printed model of the P-51D Mustang from WWII. It features the fin offset and the wing washout of the original P-51. The entire model can be printed without the use of supports. I printed the entire model in PLA. This model…
The famous weapon used by the SAS in the Iranian embassy hostage crisis in the 1980s. The MP5 can fire 9mm parabellum rounds in single shot, three-round bursts, or full automatic at 800 rounds per minute. Now your Dummy 13 can have one of…
Wallart or decoration of the legendary P51 Mustang. Very simple print, fits diagonally on the build plate of both Prusa and Bambulab printers (both versions are in the files).
Large version of my P51 Mustang Wallart, fits together with superglue. I used poster gum for mouting on the wall. Very simple print. Can be scaled, files alerady max out MK3s print bed.
The photo shows the original doorbell and base plate. The hooks of the base plate get easily broken off when replacing the battery. As a 3d model, this base plate is difficult to print in one complete part. Therefore I made it in 3 parts:…
(10/1/23) Overhauled the design to be a better fit with a wide range of magazine tolerances. Designed around genuine HK, MKE, Zenith/KCI stamped magazines. Untested with polymer magazines. A bit of grease in the cartridge channel can make…
I couldn´t find any 3D printable models for the GP5 filter so i created my own one. The bottom part (bot) clips into the top part after printing. The top part should be printed with the thread pointing up. The bottom part should be…
The main model here is a reverse bowden and cable support bracket, which is needed to make the KP5L capable of printing reliably. The printer as-shipped makes no accommodation for the filament path between the runout sensor and extruder,…
**Update 2-Mar-2023:** Added 1" barrel NP5K Files. **Update 12-Jan-2023:** Added Gryphon 1.3 compatible files for solenoid and manual, which should be easier to assemble. Also added select-fire wiring diagram. This will likely be the…
Update! Due to popular demand i have released the step files for easier modification. Parts: Psu module: https://s.click.aliexpress.com/e/_oDMk7jQ USB-C pd board: https://s.click.aliexpress.com/e/_oDtVUnE Banana plugs:…
INTRODUCTION I couldn't find a nice curved (and free) MP5 magazine for my Mosquito so I created my own. Feel free to try it out and complain if you have issues. STEP files now available. The model is based on two existing models: - BB…
I just added an MP5 to my airsoft collection, but all my gear is made to carry STANAG (M16/M4) magazines. Two of the slimmer MP5 mags fit in a STANAG pouch together, but take one out and the other will flop in the pouch freely. That's why…
I was recently inspired by glgr with his curved magazine creation https://www.printables.com/model/938167-mp5-curved-airsoft-magazine-fits-mosquito) and saw there was not a 3D printed straight magazine for the Mosquito Open Beta 2, so in…
Made to work with Ludex m4 and m16 speed loader, also works with Oden M12. Should work with other sidewinder clones. Ludex m4 mag speed loader Oden Sidewinder m4 mag speed loader I designed this to have an easier and faster way to load my…
Un chargeur portable puissant et pratique, parfait pour les urgences ou les déplacements. Nous avons utilisé une batterie 18650, choisie pour sa capacité élevée (jusqu'à 3000 mAh) et sa disponibilité. Ce chargeur peut alimenter…
This is the cockpit I built for a CARF Models P51 Mustang including the seat, left and right panels and the rear radio stack. It was built using a combination of FDM and RESIN 3D printed parts. The Exhaust stack and instrument panel will…
Remix or Yanev's model. I've removed the MicroUSB hole, fixed the screw holes and most importantly, I've removed the big slot to see the charge percent and replaced it with small 1.5mm holes to add a transparent acrylic rod for the LEDs.…
Repurposed grips on a replica MP5!
Hey friends! This model was one of my first ever attempts at 3D modeling. For a better solution, check out this model . For a great model to add even more drives in the optical bay, check out this model . I have created a hard drive cage…
credit to Pjotrik on makerworld.com for the model. Only uploading here so more people have access to it.
As requested, a remixed design to allow a better fit with free floating tubes AND scaled up by 110% to allow Magpul M-Lok hardware to fit. Slightly more difficult to print though, but not impossible with the right slicer settings. I ended…
Two variations of a grip I designed for the Retroid Pocket 5, featuring Nub technology. STLs for straight printing as is, but STEP files are also available if you want to make changes to better suit your needs. The Full Width grip is a…
10 round speedloader for both standard metal and polymer magazines, and an original length version for polymer magazines. Also, an added “Pusher” for easier sliding of rounds. The pusher works for both long and short versions. I…
A set of left and right exhaust stacks for the CARF Models P51 Mustang. The shown examples were FDM 3D printed and textured by stippling acrylic paste with a stiff brush, painted and treated with a technical paint by Citadel called Typhus…
Display stand for MP5s and clones. MP5, MP5K, and no text versions. Tested with my MKE AP5-P. Needs no supports. I printed with 10% Gyroid infill and is plenty strong. Used TheCafeRacer's vise block model since it fits well within the…
Adapter for aap-01 from Action Army. I wanted my adapter to be as easy to install as possible, and at the same time to maintain full tightness. To make the Adapter, you will need: - screw m2 - 16mm (7 pcs) - m2 nut (6 pcs) - Pneumatic…
Tactical MP5 Gnome – Guardian of the Garden This ain't your average garden gnome. Fully kitted out with night vision goggles and gripping an MP5 like he's on a midnight recon mission, this tactical gnome is ready to defend your…
Video of dumping 2 back to back mags of binary with V4 EDIT (6/5/2024): V3 and V4 release. I have personally been using V4 for 2 months no issue in pa6-cf. The default clearance is made for an omega 9k which is 37mm, but the diameter of…
wanted a free handguard so I made my own didn't like tri-picatinny rail so I did it with M-Lok so it wouldn't be too bulky. printed in two parts so it's easier to install. feel free to improve the design, I'm new to this. if you improve…
Snowpeak SP500 / Diana P-Five shoulder stock inspired from crosman 2250 ratcatcher butt stock. Model cut to fit the Prusa MINI I Printed it using PLA with 20% honeycomb infill I used CA glue to join part exept “Left front” wich is bolted…
Hey everyone this is my first "model" or first time modifying any sort of model. It is a fairly accurate full size MP5 model from the video game “Rust”. its fairly accurate as in I took the OBJ file from the game files and then converted…
it's kp5l kingroon Fanduct beter than stock no moddif creat specialy for stock printer print in 0.15 or 0.10 xwith support only for the bed
Here's a purpose-designed bracket to interface with the spring-loaded optical drive pins to add hard drives with some cooling. The other designs were very restrictive and I didn't even try them for fear that the drives would overheat.…
This drop tank can be printed in three parts which are split at a scale seam line. It is 250mm long which is anout 1/8th scale (20cc sized model). It is attached and secured using 10x2mm magnets with two 1/8th aluminium guide rods. this…
In response to my MP5 Flashlight Handguard model, I was asked to provide a model of the standard handguard without a flashlight slot. That's a good point, so here you go!
Notes I only have a WE MP5, so my dimentions may be slightly off for other brands but this should work on pretty much any MP5 including MP5SDs. I have had one make now confirming fitment on a MKE AP5 (Turkish MP5 clone). Hardware If you…
More general version of my previous design. This SHOULD work with all kinds of airsoft MP5k's, but so far I have tested it only on my JG. Meant to be used with "JG Works Scope Mount For Airsoft Mp5" to make somewhat continuous rail. Try…
*Vastly updated version: https://www.printables.com/model/725578-lenovo-thinkpad-p15-and-p52-laptops-under-deskshel *Added .STEP file for editing :) This bracket set will allow a Lenovo Thinkpad P52 laptop to mount under a desk or shelf.…
IP5328P module case This is a remix of 3D printed case for very popular IP5328P power bank module. This module supports 18W of charge/discharge and is capable of delivering 12V at the output. I made a remix to be compatible with the M3…
A remix of yhristov's remix of my KP3L fan duct to work with the KP5L. The duct is adjustable vertically to work with stock V6s or volcano-style hotends. There are also horizontal adjustments to account for different hotend positioning…
The CAD can be found from https://github.com/eamars/PrintableThrowLevers/tree/main
EDIT (12/5/23): Updated fit based on feedback. Hold 6 x of your MP5 magazines in one place. There are a couple small storage trays built in which also prevent the unit from tipping over. Has been tested to work with MKE, Zenith, and HK…
Designed this Mp5 speed loader with aspects I've seen from a few other commercially available ones. Prints with no support material and in about 3 hours. The rails that interface with the cases are removable and replaceable in case they…
[EDIT] There was an error in 229 version, make sure you use fixed version! Conversion for airsoft MP5k. It will make mp5k longer, 229 version is roughly regular MP5 length. Modelled to be used with JG MP5k, but should be usable with other…
As they don't seem to make even airsoft versions of these anymore so I designed my own. I don't have one so I was just modelling it using of off-axis photos from google so its not going to be exactly the same as the original, and now…
Под печать соплом 0.4мм, слой 0.2мм. Можно любым в принципе, но отсеки для светодиодов могут не пропечататься при использовании более крупного сопла (подбирать ширину лини придется). Печатал из АБС, сопло 0.4мм, слой 0.2мм, клеил…
Keeping on with my trend of designing functional parts for extremely niche use cases, I present you with a custom adapter to turn the original stand mount on a LG 24MP58VQ 24" monitor into 100x100 VESA. A 4mm and 7.5mm drill are…
Here is a collection of BB funnels i have made over the years. I previously sold theses as printed products however im stopping that. So here they are free for everyone now. This collection includes M4 & M16 AK 47 G36 AUG MP6 40MM Moscart…
Vise block for MP5s. Has been tested to work with HK SP5, MKE AP5-P and a Zenith ZF5-P. There is an overhang that prints where the mag catch is. If you are having issues with the mag seating; you can clean up the edge with an Xacto. I…
*Added .STEP file for editing, enjoy! Designed this to store away my work laptop when I'm done for the day to clear space so I can slide-out my personal keyboard+mouse. My configuration allows to keep the laptop connected to power, USB…
Drywall/ceiling mount for Aruba AP500 series WiFi Access Points Aruba's AP500 series do not come with any mounting hardware, this simple mount allows you to screw-mount this style of AP to a wall or ceiling or other solid surface. This…
LEDLENSER P5R Core torch holder with charger socket. I recommend sponge glue to fix the charger
I needed some space on my desktop, so I took advantage of ThinkPad's ability to be opened "completely". Moreover, the screen is now at a more comfortable height for my neck. As this laptop is quite heavy, I didn't want it to fall upfront,…
Print settings: Material: PETG, ABS, or ASA Layer height: 0.25mm Wall loops: 3 If you want to have the honeycomb holes for ventilation, like how I have in the photos, add a modifier to the first 2.5mm with the following settings: Infill:…
Magazinerweiterung bzw. Speedloader für HDP50 mit Picatinny Schiene.
Update (11/25/18): Added threads for the outer barrel to screw into. Replacement front sight for Galaxy/Tokyo Marui/CYMA MP5k Will NOT fit standard MP5 Plan on making a removable sight indicator for this part if it happens to get shot…
Update 2025-10-14: Removed the remix link to glgr's Curved MP5 magazine . My mag has grown different in every way and is no longer based on his mag design. A remix link no longer made sense. Fitment is based on Cyma's metal-shell AEG…
Držák na 6 kusu zásobníku pro MP5. Pro Mid-cap i Hi-cap magazine. 6 piece magazine holder for MP5. For Mid-cap and Hi-cap magazines.
This is an enhanced version of the airsoft mp5 selector cam, compatible with both V2 (A, SD and Navy variants) and V3 gearbox versions (K variants) of the mp5. Being a gunsmith for my team, I have come across the need for this part…
2.5" Drive HDD / SSD Laptop Drive Caddy Disk Tray Bracket for Lenovo ThinkPad. Compatible Models: For Thinkpad T470 T480 T570, For Thinkpad P50 P51 P51S, For Thinkpad P70 P71 P72, For Thinkpad E460(NOT E470)， For Thinkpad E480 E485 R480,…
I made a P51 as a suspended print, just for fun. The model is made to print with 0,2mm layer hight. Other layer hight may not work. Printed on Prusa Core one, 0,2mm layer hight, PLA, without support and without raft. The printbed has to…
I love uploading car parts. Great fun altogether. Maybe some day it will be possible to download a complete Toyota Hilux 1:1 scale Hilux and print it from metal. Make sure you print the bottom part on it's side, I have included some 0.4mm…
This allows factory MP5 or PTR Magazines to be used in states with a magazine capacity limit.
WAIT! Before printing, just know that there is now a new updated version available https://www.printables.com/model/1179980-mp5-and-mp5k-for-dummy-13-beta-v1extra-stock-skele A beta release of a little something that I am working on :)…
I needed a mask to scan half-frame film and as these items are getting more and more expensive and rare, I decided to design one myself. The design was based on the original mask 135. The window in the mask is exactly the nominal size of…
tho original model was just a bit to tight for me. It just fit on with a hammer and destroyed my sticker, so I scaled it to 101% so you don’t have to. Top part of printer needs to be dismantled: unscrew the 4 screws on top and one of the…
Quick holster for the Novritsch SSP5 No retention mechanism, meant only for storing the pistol between games when used as a primary or with a m4 adapter like I am. Of course Novritsch sells these in metal which will hold up better but for…
A couple of years ago I bought an np5 gryphon secondhand, and wanted to design something to make mine a little different from the other ones out there. 2 years later and I finally got around to doing it! The NP5SD replaces several parts…
Print settings: Printer: Creality Ender-3 V3 Slicer: Cura 5.8.1 Filament: PrimaValue PLA+ White Resolution: Standard Quality - 0.2mm Strength: Infill Density: 10% Infill Pattern: Cubic Shell thickness: 1mm; 1mm Support: Normal Additional…
Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print instructions Category: Sport & Outdoors Summary Just my Remix of the Stock Tube Extension for Arp 9 and Arp 556 Print Settings Printer Brand: Anycubic Printer:…
I need to create a custom attachment for a gas mask and had to model a thread to fit my need. (since i could't repurpose the ones i've found here) The thread turned out quite nice, so i decided to share it. Since its just a thread with…
A simplified model of a IP5306 5V 2A powerbank module for use in your projects
original stl provided with kingroon doesn't fits my printer :( it's just too high and nozzle hits the bed :( so I've modeled simplest possible mount link to onShape project to edit:…
This will take a little bit of mechanical work to complete. All parts printed without supports. Parts and tools I used. 3/8-16 ready thread rod about 6 to 6 ½ inches 5/16 flat washer 6-32 x 3/8" screw #6 flat washer super glue 6-32 tap…
This is part 7/7 of the modular Eiffel Tower. The 50 cm Eiffel Tower consists of 7 individual parts. These parts were originally released separately over several months as a free preview of the complete project. This free release now…
Ever wanted a MP5K but want it to sling foam? Now you can! Included is a top MP5-esqe compartment that fits a very very slim battery that you'll probably have to build yourself and an included stock cap. An optional closed compartment…
This is a Samsung Z Flip6 (and previous flips such as the Flip5, Flip4, and Flip3) adapter for the Qi wireless charging pad in 2020-2023 Tesla Model 3 & Y. It should fit into the car semi-tightly and not move around when you insert/remove…
New version of m4 stock adapter for mp5k. This is at least compatible with JG MP5k. If you have problems with fitting, you can contact me and propose changes. CleanAndThin is MP5k part only. [edit 22.4.2020] made M4deansV2, it has bigger…
Voron style Mount for the Mellow Fly DP5 MCU Needs original voron DIN Clip and M2x10 Self Tapping Screws
Two-Piece assembly for Quick Wireless Charger EP-P5400. Print and slide together, finished! Alignment Feature for S23 Ultra with Samsung Leather Case, smaller Phones should work too -Cutouts on bottom for 4x 3M Bumpon SJ 5076 -Supports…
Mount your Ryobi Lithium Screwdriver 4v HP54L (and HP34LVN) on a Skadis pegboard, combined two models I found so it works with Skadis: Universal Skadis Mount https://www.printables.com/model/282336-skadis-universal-mount-big 4V Li-Ion…
I needed a power bank case for my salvaged 18650 batteries. The module I used is in the link below. 5V 2A Charge-Discharge Integrated Module Type-C Input Compatible With 4.2V lithium Battery,…
