Wyniki wyszukiwania: pads

Sortowanie

747 modeli

P
PrintablesSneaks

Adjustable Stand for Smartphones, Ipads, and Tablets :: 100% Printable :: No Hardware

Recently I designed a very rugged Tablet Stand for a Tradeshow booth that used quite a bit of unique hardware. After posting the design on Reddit and getting feedback, I decided to try and duplicate the design without using any hardware…

Pobrania
5173
Polubienia
1032
Ocena
4,94
P
Printablesjcjames_13009

Festool clamp FS serie protective pads

I have a set of Festool clamps I use mainly with FS2 Rail. I wanted to add protections to use them as standard clamps and protect wood surface I designed and 3D printed both pads in Prusament PETG Jet Black with my MINI+. No support…

Pobrania
622
Polubienia
115
Ocena
4,67
P
Printablesalternatywny

Cotton Pads & Swabs Holder

It's a variation of simple holder for cotton pads and swabs. Printing Settings Print position: default orientation Material: any Supports: No Layer height: 0.2 mm Infill: 5% Nozzle: 0.4 mm

Pobrania
430
Polubienia
34
Ocena
5
P
PrintablesBe Me

Customizable Wall Mount for Mobile Hotspot / Wifi Access Point / Router (screws or glue pads, TP-Link, Huawei, Alcatel..)

This is a screwable or gluable wall mount for mobile LTE / 5G wifi hotspots / access points with an additional slot for the battery. Features: charging slot in the middle on the bottom display is visible (turn device around if you don't…

Pobrania
363
Polubienia
29
Ocena
5
P
PrintablesMakafab

Sanitary pads dispenser

I design this model for my girlfriend She wanted a pads dispenser to make more elegant than just letting the box of pad in the bathroom. The cap snap in the box, i have print both of them in PLA I have pretty big hand but the hole is well…

Pobrania
220
Polubienia
38
Ocena
4,33
P
Printableseried

Dremel Multi-Vise Pads

The Dremel Multi-Vise comes with two soft rubber pads from factory. This are a hard replacement ones, so you can scratch and damage them without worrying too much because... you can print another ones :)

Pobrania
153
Polubienia
49
Ocena
5
P
Printables3D_Micha

Behälter für Abschmink-Pads und Wattestäbchen

ein Behältnis für Abschminkpads und Wattestäbchen

Pobrania
132
Polubienia
18
Ocena
4,5
P
PrintablesAdam Kimmerly

Modern Morse Paddle Finger Pads

One of the finest portable CW paddles you can buy is from Modern Morse . Aaron has made a truly fantastic morse code tool, handmade and designed in the US. Get one, you won't regret it. Then, consider swapping out the finger pieces with…

Pobrania
70
Polubienia
15
Ocena
5
P
PrintablesAWSW

ECOVACS DEEBOT (X1 e OMNI) mopping pads holder

ECOVACS DEEBOT (X1 e OMNI) cleaning pads holder to store the mopping pads when you do not want to use them. You can simply slide the pads onto the hexagon posts and if you want to secure them even more in place you can add two 6x3mm…

Pobrania
51
Polubienia
3
Ocena
5
P
PrintablesNG15

Ninjago Climber Suit Shoulder Pads

Ninjago Climber shoulder pads from Season 2 of Dragons Rising! Design is based on the show. Parts are split by color for the gold decorations. Can be done with multicolor printer, although I found it looks better with printing separate…

Pobrania
47
Polubienia
16
Ocena
0
P
Printablesrlfigueiredo

Wall Mount for iRobot Braava Jet m6 Mopping Pads

Wall Mount for iRobot Braava Jet m6 Mopping Pads

Pobrania
44
Polubienia
6
Ocena
0
P
Printablescrashkg

Angle Pads for Parallel Clamps

Print 2 sets of these pads to slide onto Bessey Parallel Clamps. Then you can use to clamp angled work pieces like tapered legs or joints that are not perfectly 90 degrees. Print the pads with no support with the pad facing the print bed.…

Pobrania
32
Polubienia
13
Ocena
5
P
PrintablesJacob

Magnetic Holder for Reusable Cotton Pads

A stylish and practical holder for reusable cotton pads, designed with built-in slots for 5x5x5mm square magnets. The magnetic feature allows secure attachment to metal surfaces, keeping your pads organized and easily accessible. Perfect…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesJacob

Magnetic Drying Mount for Reusable Cotton Pads

This magnetic drying mount is designed to hold reusable cotton pads while they dry. It features built-in slots for 5x5x5mm square magnets, allowing easy attachment to metal surfaces like bathroom radiators or other convenient spots.…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesOwen Burkitt

tratchen pads

tratchen pads

Pobrania
8
Polubienia
2
Ocena
0
P
PrintablesTec-Pete

Unleazhed / MR02 / Montagepads

Bin total begeistert von diesen Schutzblechen für das Mountainbike. Leider verliere ich regelmäßig die kleinen Elemente zur Positionierung des Schutz"bleches" an der Strebe. Ohne diese ist das Schild nicht mehr richtig geführt. Das Teil…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesUsername

Ribbed Cotton Pads and Buds Organizer

Beautiful designer organizer for cotton pads and sticks.

Pobrania
3625
Polubienia
1020
Ocena
5
P
PrintablesDesignCraft

Kitchen & Bathroom Sink Drain Strainers, Stoppers, Pads

A collection of kitchen and bathroom drain strainers, stoppers, and drain pads. Useful for kitchen sinks, bathroom sinks, utility sinks, bathtubs, and probably more! Before printing, please review the list of models and their respective…

Pobrania
2171
Polubienia
746
Ocena
5
P
Printablesthall72
Pobrania
1012
Polubienia
103
Ocena
4,5
P
PrintablesBastla Fidli

Corner pads for clamps - Action (brand) Clamps 43 x 30 mm

Clamp mounting pads for precise right angle assembly. Made for Action (brand) clamps, but this size will fit other similar ones. Internal dimensions are 30.5 x 43.5 x 2 mm. There are two sizes. The larger one for large parts has a height…

Pobrania
968
Polubienia
484
Ocena
5
P
PrintablesMisterTLX

Anycubic Kobra S1 Anti Vibration Foot Pads

10% gyroid infill with 95A TPU Since anycubic doesn't like providing things we need I went ahead and made anti vibration feet. These are a snug fit so if you need to pick up the printer these will stay in place, i put a dab of crazy glue…

Pobrania
927
Polubienia
137
Ocena
5
P
PrintablesAHHRH

6 Tablet Holder and Charging Station for Chromebooks or iPads

The Charging Station was designed as a low-cost alternative to commercially available charging stations for our school. The holder/charging station can be made for between $60 and $80 including the feet and power-strip. The center area…

Pobrania
861
Polubienia
116
Ocena
5

COVID-19 Emergency mask with the use of cotton pads as a filter

This mask provides a valve for inhalation and exhalation that allows you not to accumulate moisture in the mask . I designed 2 mask sizes Adult/male and child/female. For printing, you will need Flex plastics, the best fit is TPU You can…

Pobrania
805
Polubienia
92
Ocena
4
P
PrintablesKatiekat

3d printable dpads for miyoo mini v2

Here are 5 different printable versions of dpads for the Miyoo Mini v2. Dimensions are taken directly off the console and fitment should be close to stock. The Different versions are: Regular concave version with arrows (like stock)…

Pobrania
772
Polubienia
56
Ocena
4,88
P
PrintablesMeister Edel

TPU Knee pads

Heyho Here I have some Knee Pads to put into your specific pockets of your trousers (If you have some). Or use some tape to hold em in place xD TPU & Infill: This design is very customizable since you can choose between very soft - hard…

Pobrania
699
Polubienia
305
Ocena
5
P
PrintablesGhostbird

Nose pads for glasses

Place twice on the print bed, flattest side down, mirror one instance horizontally. The final version I printed was scaled 125% from the CAD model. Adapt as necessary. I enabled PrusaSlicer's Print Settings » Output options » Complete…

Pobrania
699
Polubienia
41
Ocena
5
P
PrintablesAnna Mozhar

Cotton pads and swabs organizer

Dimensions: Around 8.5 cm tall, 6.4 cm wide and 9.8 cm in length. Objective: I decided to do something useful for myself and create an organizer for cotton pads and swabs for my bathroom, so it's easier to take them out when you need to…

Pobrania
675
Polubienia
219
Ocena
5
P
PrintablesMiguel Camba

Gridfinity sandpaper pads holder (125mm/5")

A 3x3x3 stackable gridfinity tray designed to store 125mm/5" sanding pads, with a notch to make easy grabbing it with your finger. With 3 units tall it holds between 10 and 20 sanding pads depending on the grit (the coarser the grid, the…

Pobrania
622
Polubienia
107
Ocena
4,71
P
PrintablesJeremyKMac

Clamp Pads for Microjig MATCHFIT Dovetail Clamps

This is a series of clamp pads for the Microjig MATCHFIT dovetail clamps. The green rendered pads are for the swivel end of the clamp. The blue rendered pads are designed for the dovetail end of the clamp. Simply invert the clamp and use…

Pobrania
613
Polubienia
147
Ocena
5
P
PrintablesServerGuy2008

Multiple iPads Stand/charging station

Can easily hold 4 iPads/tablets or several more phones. It also holds my M2 MacBook nicely. They're wide enough to accommodate most thick rubbery cases. The base is 180x180mm, the maximum I could do on a Mini+ I needed a way to store my…

Pobrania
608
Polubienia
46
Ocena
5
P
PrintablesNoctua_at

NA-AVP1 anti-vibration pads for Noctua 120/140mm fans

NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1

Pobrania
605
Polubienia
132
Ocena
5

CNC Vaccum Pads

vacuum pads, m6 threads need to be cut for PC4-M6 connectors i use this seal: https://www.amazon.de/-/en/gp/product/B09

Pobrania
588
Polubienia
62
Ocena
5
P
PrintablesHansisThings

TPU New Clamp Cover Pads - Ersatz Schoner / Auflage für Schraubzwinge TPU

-German: Ersatzplastikabdeckungsdingelchen für Baumarktbilligdrecksschraubzwingen -English: The plastic covers for those clamps are bad and terrible and break easily, so I designed some new ones. I printed those with TPU (REQUIRED - or…

Pobrania
588
Polubienia
333
Ocena
3,75

Organizer for sanitary pads for your girlfriend

Fed up with the usual screw organizer ? Why not build a simple organizer that is very useful for your girlfriend? Your girlfriend will be very grateful to you! And she will approve the purchase of a new another one 3D printer! Maybe ...…

Pobrania
547
Polubienia
185
Ocena
5
P
Printablesthall72
Pobrania
530
Polubienia
68
Ocena
0
P
Printablesthall72
Pobrania
507
Polubienia
70
Ocena
5
P
PrintablesTilan2000

Powerful desktop solder fume extractor with big 140 mm fan and two 10 mm filter pads

Tired of the smelly solder fumes floating around? This is the answer. A solder fume extractor with a powerful 140 mm fan. This solder fume extractor is designed to carry a big 140x140x25 mm fan. I used the powerful Noctua NF-A14 with 3000…

Pobrania
493
Polubienia
140
Ocena
5
P
PrintablesFlygonial

Fly's Electric Unicycle (EUC) Pads

Beyond being separated power pads you can adjust to your liking, the jump pad is also separate and can be foregone for the Patton. The front and rear pads are positioned farther to the ends of their respective areas, allowing for you to…

Pobrania
486
Polubienia
74
Ocena
5
P
Printablesthall72
Pobrania
465
Polubienia
69
Ocena
5
P
Printablesthall72
Pobrania
459
Polubienia
58
Ocena
0
P
PrintablesImpecable

EUC Jump / Power Pads

Jump & Power pads for Electric Unicycles/EUC's. Ankle gap is 98mm and the arms are 36mm deep.

Pobrania
459
Polubienia
19
Ocena
4
P
PrintablesMartin

Stargate Jaffa Armour - Collar and Shoulder Pads

This is the second part of my own Stargate Jaffa Armour. This Armour will be an amalgamation of the Armour worn by Anubis in the Movie and the Armour of the Serpent Guards from the show. I call it “Roayal Serpent Guard Armour”. This part…

Pobrania
421
Polubienia
121
Ocena
5
P
PrintablesMetikumi

Cotton Tips and Pads Container

I found several designs for cotton pads and tips holders, but none had the dimensions and shape I liked. So I created this parametric version for my purpose. The print you see was made using Prusament Galaxy Purple. Use the gcode file for…

Pobrania
396
Polubienia
81
Ocena
4,86
P
PrintablesOsfald

Capacious, 4 sections container / dispenser / organizer for cotton buds and pads, plus covers

Simple, capacious (12 x 12 x 12 cm), 4 sections organizer for cotton buds and pads. To fight the mess in your bathroom :) I also attached some optional covers. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…

Pobrania
396
Polubienia
85
Ocena
5
P
Printablesifon

Mini Cotton Pads and QTips holder

I printed it in a Creality Ender 3 V2 0.4 mm nozzle, 0.2 layer hight, 20% infill, 210C and 60C Also used a brim to get a better adhesion. And for the seam alignment I used the option “random”. Took me 6h to print at 60mm/s and turned out…

Pobrania
388
Polubienia
45
Ocena
5
P
PrintablesPavel Smalec

Elegoo Centauri Carbon Anti-Vibration Feet Pads

Anti-Vibration Feet for Elegoo Centari Carbon 3D Printers Diameter : 38 mm Total height: 30 mm These anti-vibration feet are designed to be easily slid onto your printer’s existing feet—no tools required. Printed in flexible TPU 95A with…

Pobrania
385
Polubienia
41
Ocena
5
P
Printablesfrederic.b

BETAFPV PAVO 25 V2 SOFT PADS

Print with TPU material Layer0.2 mm infill 15% Secure the pad with a tie on the frame

Pobrania
379
Polubienia
28
Ocena
5
P

Hifiman HE Stand for Arya, HE1000, and Jade series headphones with Dekoni pads

Hifiman HE Stand for Arya, HE1000, and Jade series headphones. This model works best when the larger Dekoni pads are installed, as the original pads are slightly thinner.

Pobrania
374
Polubienia
21
Ocena
5
P
PrintablesPavel Rampas

Replacement Clamp Pads

OpenSCAD parametric replacement clamp pads.

Pobrania
367
Polubienia
134
Ocena
5
P
Printablesthall72
Pobrania
361
Polubienia
59
Ocena
0
P
PrintablesJace1969

Death Trooper Shoulder Pads

Hi Steve, Here ya go buddy. I assume this is what your after ; ) I'd uploaded the suit to Etzy to generate a couple of $ so I could buy material for my 3D printers. But it hasnt really been a great success, Still I probably should have…

Pobrania
360
Polubienia
59
Ocena
0
P
PrintablesTommy Monk

Sanding Disc/Pad Holder for 125mm / 5" pads

Storage for sanding disc/pad with label for grits 40, 60, 80, 100, 150, 180, 240, 320 Each slot is 24mm wide, enough for 15-20 pads Inspired by the design 5 inch Orbital Sander Disk Holder I suggest a brim to prevent any of the corners…

Pobrania
351
Polubienia
46
Ocena
5
P
PrintablesHalit

Ender 3 spring pads

Ender 3 upgrade! Get rid of leveling heated bed again! Print instructions Rafts: No Supports: No Resolution: 0,2 Infill: 50 Filament_brand: Filament_color: Filament_material:

Pobrania
348
Polubienia
32
Ocena
4,67
P
Printablesthall72
Pobrania
344
Polubienia
57
Ocena
0
P
Printablesmedyk3D

Sanding Pads

Tired of sanding dowels, round stock, profiles and corners? I hope that with this Thing your life will be easier. Those are just simple sanding pads/blocks. Wrap some sanding paper around and start sanding. There are three types in…

Pobrania
344
Polubienia
83
Ocena
5
P
Printableskadous

Balance pads / Balanční podložky

Balance pads are the little tools for the correct pactise of the feet. Thisis a stabilization aid for strengthening ankle and foot muscles. See you: https://www.rehabilitace-sport.cz/nestabilni-plochy/1379-propriofoot-balancni-plosky.html…

Pobrania
331
Polubienia
7
Ocena
5
P
PrintablesMarkus Schmidt

Box für Schleifpads Deltaschleifer - Storage for Delta Sand Paper

Schleifpad Box für Deltaschleifer z.B. für den Worx-Deltaschwingschleifer. Eine einfache Aufbewahrungsbox für die Schleifpads von einem Delta Schwingschleifer. Innenmaße: 107mm x 27mm und 97mm hoch Wand- und Bodenstärke: 1,5mm Die Boxen…

Pobrania
322
Polubienia
28
Ocena
5
P
PrintablesStina

Dolce Gusto Coffee Pads Rack

This is a space-saving solition to store your dolce gusto pads. The part a fixed with a puzzle connection to give them an orientation. You can fix the rac with glue on a board/door/wall.

Pobrania
321
Polubienia
73
Ocena
5
P
PrintablesMr.Ice

K2 Filament Clip w/ToePads

This is a simple remix of the excellent K2 Filament Clips to add toe pads -- small pads that print just in the first layer to hold the points down. They tear off easily, requiring very little to no cleanup. This greatly improved printing…

Pobrania
319
Polubienia
37
Ocena
4,8
P
Printablespz

Acupressure Foot massage pads

My design of foot massage mats. Designet for foot size 25,6 cm / EU 41 / US 8 Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports: No Resolution: 0,28mm Infill: 15% Filament: creality PLA Category: Other

Pobrania
317
Polubienia
69
Ocena
0
P
Printablesthall72
Pobrania
316
Polubienia
49
Ocena
1
P
PrintablesPanWiadro

Sandpaper pads holder (125mm)

Simple wall holder for 125mm pads. Each section accomodate around 50-100 sheets. Print Settings Printer: vking Rafts: No Supports: No Resolution: 0.25 Infill: 10% Category: DIY

Pobrania
310
Polubienia
47
Ocena
5
P
Printablesthall72
Pobrania
309
Polubienia
57
Ocena
0
P
Printablesthall72

Lego Compatible (15727.dat) Minifig Armor Shoulder Pads with 4 Spikes

This model is compatible with the lego system.

Pobrania
306
Polubienia
52
Ocena
0
P
PrintablesCD PROJEKT RED

Cyberpunk 2077 — V’s Crash Pads

Damn, kid. Lucky you had these. Maybe stick to four wheels next time; leave the bikes to that partner o’ yours. These crash pads really do the job though, huh? Some of my patients rock just one or two, but four on each arm is the way to…

Pobrania
300
Polubienia
126
Ocena
5
P
PrintablesDean_Machine

SCUF Instinct Pro (Xbox) Stand w/ Foot Pads

Added 10 x 3mm cutouts to the bottom for rubber foot pads. Keeps the stand from sliding around.

Pobrania
290
Polubienia
29
Ocena
5
P
Printablesmbugert

Smart Card Dummy (for ThinkPads)

It protects smart card readers from dust. It can also be used as a residue-free alternative to stickers for identifying laptops (when printed in different colors). It's completely flush when inserted. This way it cannot get caught…

Pobrania
288
Polubienia
46
Ocena
5
P
PrintablesTexasRed

ACH Helmet Pads

3d printable Army Advanced Combat Helmet (ACH) pads. Replicated from originally CIF issued TeamWendy pads. Should work with any helmet you have. 3 different shapes so arrange them however is most comfortable. Originally issued 4…

Pobrania
288
Polubienia
39
Ocena
5
P
PrintablesDrElectron

Ancient Column For Cotton Pads & Cotton Buds (qtips)

Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.

Pobrania
286
Polubienia
66
Ocena
0
P
PrintablesCletus 3D print

Sanitary pads dispenser

This is a sanitary pads dispenser (tampon dispenser) to make more organized and easily to store in bathroom. The inner measures are 100mm x 90mm. Supports are required only on front for the base of the chamfer (45° inclination). On my…

Pobrania
283
Polubienia
41
Ocena
5
P
PrintablesKagman

Onewheel GT Rear Foot Pads

IMPORTANT NOTICE I do not keep my designs updated on printables anymore. To ensure you download the the most up-to-date models, please visit this design on my makerworld account: https://makerworld.com/en/models/20779 Thanks for your…

Pobrania
278
Polubienia
25
Ocena
0
P
Printablesraphael

Gridfinity Cotton Pads Container

When working with my airbrush I recognized that need a lot of extra stuff mainly for cleaning it. After a while I was annoyed that these things were always flying around loose on the table. Therefore, I started thinking to print some…

Pobrania
277
Polubienia
56
Ocena
5
P
PrintablesButcher9_9

Aldi or Harbor Freight Corner Clamp Pads 90° / 120° / 135° - Matching slots

Remix of DustBunny67's clamp pads. models from scratch ( Fusion 360 files attached) . The original Pads had slightly different slots so the Outer pads did not fit the Aldi clamps I had. I have made them match and beefed up the tips. Print…

Pobrania
276
Polubienia
50
Ocena
4,8
P
Printablesmeet

Additional set of alternative Mini Mixing Pads

Additional set of alternative Mini Mixing Pads I really liked the Disposable Mini Mixing Pad model. But I would have liked another arrangement of pads and spatulas. I think the mixing pad can find many different uses. All my variants are…

Pobrania
270
Polubienia
38
Ocena
0
P
PrintablesMatt Boyer

SpaceX Landing Pads JRTI, OCISLY and ASOG

SpaceX landing pad from the drone ships "Just Read the Instructions", "Of Course I Still Love You", and the newest one “A Shortfall of Gravitas”. Print one or all three. Print instructions Start with a base color of Charcoal Grey or…

Pobrania
270
Polubienia
99
Ocena
5
P
PrintablesAkilled

Cotton pads and buds organizer

Once I saw a similar thing on this site, but when it was needed I could not find it. Made my own version of the organizer for cotton pads and swabs. Added a lid that completely covers the cotton swabs Print Settings Printer: FlyingBear…

Pobrania
264
Polubienia
31
Ocena
5
P
PrintablesJR

Bathroom Shelf (for cotton pads, q-tips etc.)

A little shelf I made for storing various bathroom items. The main compartment in the middle is 100 mm tall and fits a stack of cotton pads up to 60 mm in diameter, wich can be easily taken out due to the opening in the front. On the…

Pobrania
262
Polubienia
38
Ocena
4
P
PrintablesSirMissalot

Box for sanitary pads

My Girlfriend has a MOSSLANDA shelf in her Bathroom, right next to the toilet and needed a Box for her sanitary pads so i made one and spray painted it. There is a higher and shorter version both fitting the same Lid

Pobrania
262
Polubienia
45
Ocena
5
P
PrintablesWachovius

Nose pads for glasses / Nasenpads für Brillen

Simple nose pad replacement for my glasses. Printed in transparent TPU on a BL p1p. Use your standard TPU profile, 2 walls, no top / bottom layers, 100% rectilinear infill, no supports. Enjoy.

Pobrania
261
Polubienia
12
Ocena
5
P
PrintablesNivenante

Modular Bottle Holder for Fridges with suction pads

This Bottle-Holder is for 0,5L NRW Beer-Bottles (check the pictures) with a diameter of ~70mm and a height of ~260mm. It's the type of bottle that's mainly used in Austria, Germany and Swiss. It should stop them from rolling around inside…

Pobrania
259
Polubienia
41
Ocena
5
P
PrintablesBrava world

Stand for cotton pads, cotton swabs, and small items/Подставка для ватных дисков, ватных палочек, и мелочей

Hello ✋ Here are various models of organizers for cotton swabs, cotton pads, and other small items. The design is (in my opinion) soft, minimalistic, and organic in shape, helping them blend seamlessly into your interior. Of course, you…

Pobrania
254
Polubienia
14
Ocena
5
P

5" Orbital Disc Sander Pads Storage Tray with Labels

I recently purchased several packages of varying grit 5" sandpaper pads for my Ryobi Orbital sander. I wanted some way of storing them in my tool box drawer. I also wanted a quick way of identifying which grit I was looking for. I sized…

Pobrania
243
Polubienia
50
Ocena
5
P
Printableshcllchk

Holder for new stampin' up ink pads

ink pad holder for new stampin up ink pads

Pobrania
241
Polubienia
24
Ocena
0
P
Printablesthall72

Lego Compatible (11438.dat) Minifig Armour Shoulder Pads with Ridges

This model is compatible with the lego system.

Pobrania
240
Polubienia
42
Ocena
0
P
PrintablesowShredder1988

Mushies Footpads for Onewheel XR - VOW systems

Mushies Footpads for Onewheel XR - VOW systems. All credits to VOW systems

Pobrania
238
Polubienia
7
Ocena
0
P

Skull with Spikes Shoulder Pads

There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…

Pobrania
232
Polubienia
52
Ocena
5
P
PrintablesCDoucet

POWER PADS FOR EUC

Visit my Cults3D page for more designs. 2 sets of power/jump pads for electric unicycle. The only difference between the two sets is that one set is separated into two pieces and the other is one piece Both sets are available with or…

Pobrania
231
Polubienia
21
Ocena
5
P
PrintablesCap'n Corny

Carbon 13 Type M - Pauldrons (shoulder pads)

New model, new armor! I'm going to keep doing what I do best and make the types of armor bits I would have loved to play with as a kid. I took the pauldrons from my Bastion/Rampart 13 and added them to the Carbon 13. It limits the range…

Pobrania
227
Polubienia
64
Ocena
5
P
PrintablesUko

Cotton Pads Holder

Pairs well with the printable Mini Cosmetics Bin . You can also find a lid in the Extra folder if you're afraid that dust will collect on the pads

Pobrania
226
Polubienia
40
Ocena
5
P
PrintablesMatixBuilt

Pint oversized pub pads

These are oversized pint pub footpads they are similar to halo pads in size and mild concave. There will be 2 versions of these, the V1 has some minor geometry adjustments to match the profile of my v1 pint pubrails. The v2 will match the…

Pobrania
225
Polubienia
15
Ocena
4,5
P
PrintablesGoose

Floor Jack TPU Pads - 6 Designs!

Print came out great and fits, will be tested on a car soon! No supports needed! Make sure the pattern side (circular, knurling, etc…) is face down on the build plate. All of the models are set up this same way including the pinch weld…

Pobrania
224
Polubienia
57
Ocena
0
P
PrintablesEndracion

No Solder Hot Swap Socket for Handwired Mechanical Keyboards & Macropads

Remixed the excellent design from stingray127 with a few tweaks in order to make installation slightly easier. Added an angle for the horizontal wire so that they stay put and avoid the vertical wires of the matrix. With the above…

Pobrania
222
Polubienia
57
Ocena
0
P
Printablesfryc88

Rubber TPU pads for woodworking clamps

A while ago I purchased online some cheap woodworking clamps. One of them has snapped & I lost that bit, found model already to print, but I also lost rubber anti slip pad, so I have designed same one to print from TPU. I have used TPU…

Pobrania
220
Polubienia
88
Ocena
5
P
PrintablesJeremyKMac

Harbor Freight Bar Clamp Pads

I'm always losing or destroying the clamp pads for my collection of Harbor Freight Quick Release Bar Clamps. Fortunately all of the various sizes use the same size clamp pads. These clamp pads are a little heftier than the originals, but…

Pobrania
220
Polubienia
71
Ocena
5
P

Skulls on Chain Shoulder Pads

There is a 30% Off Discount for the models for all the DakkaDakka store Patrons! Check out this month's collection patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…

Pobrania
218
Polubienia
43
Ocena
4,5
P
PrintablesDJBB

Cassette Tape Replacement Parts (wheel, pressure pads, etc.)

Wheel Print the two halves of the wheel flat side down, then glue together with superglue. I suggest printing the jig to help with keeping things lined up. I used PETG with a 0.4mm nozzle and 0.15 layer height, but probs not super…

Pobrania
218
Polubienia
28
Ocena
0
P
PrintablesKricki

Bike trainer iPad mount for iPads Gen 5-9

The 3mf file contains all parts fitted on a 25x25 cm build plate Alternatively, print the cross brace, cross mount and 2 arms (stl files).

Pobrania
218
Polubienia
23
Ocena
0