527 modeli
Medium capacity ammunition box for 100 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. High capacity box (150pcs) available here –…
Wydruk około 15,13 €–18,49 € nettoWstępna wycena jednego wariantu
This model is designed to print quickly. I love design which use minimal time and material. Size is for 4, 6, 8, 10, 12 pcs batteries. Depleted batteries could be stored upside down to identify them from those already charged and ready…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is modifed version of the initial vase mode design. Primary goal was to reduce print times and plastic use for PLA disposable printing... This design compared to RC2 uses 3 to 4 times less plastic and is usable... It is much improved…
Wydruk około 6,18 €–7,55 € nettoWstępna wycena jednego wariantu
Remixed version of Ravi's model to hang two rackets instead of five. Added an additional hole to center mount on a unused hook.
Wydruk około 4,20 €–5,13 € nettoWstępna wycena jednego wariantu
These are motivational message ear savers for use with surgical masks. I have optimized print settings for 0.6mm nozzle on Prusa I3 MK3S printers. I am using amazon basics PETG. Print instructions The settings are in the file. These print…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a speed optimized profile for printing 11pcs of the motivational ear savers in 36 minutes on a PRUSA I3 MK3S. This is pushing the limits of the hotend so you may need to characterize and tune your MVS if you don't have the same…
Wydruk około 1,14 €–1,40 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The work tray on the Park Tool PCS-10.3 Deluxe Mechanic Repair Stand has holes for tools, but loose L-shaped hex keys sit unevenly and the smaller ones can fall through. This insert fits snuggly in the holes on one side of the repair…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
EN: Lids with labelling can be printed with a simple colour change, no MMU required, .gcode files already contain the colour change. Material: PLA Layers: 0.3mm Supports: none see also:…
Wydruk około 4,14 €–5,05 € nettoWstępna wycena jednego wariantu
4 ks Dekorativní rámečky Jelen Vlk Medvěd Šestihranné
UPDATE: Complete with Mindflyer and 2 figure stands. A 22-piece stand for the popular Stranger Things figures, with the logo in the middle.A 22-piece stand for the popular Stranger Things figures, with the logo in the middle. PLA 0.2…
Mountain Scenery Wall Art
The most kawaii & funniest Pokémon you've ever seen! Print it in one color, paint it or print in multi color🔥! Print profiles There is a print profile with all 4 on the same plate (single color), or you can print them individually. Print…
🌍 WallArt – World Map Hexagon 12 pcs Bring the spirit of travel and exploration to your wall with this unique 12-piece World Map Hexagon WallArt. 🧭✈ The complete artwork consists of 12 individual hexagonal pieces that come together to…
5pcs Hexagon African wild animals Wall Art
Did not find a hex bit holder that worked for me, so I made my own.
High capacity ammunition box for 150 pcs of 9x19mm Parabellum bullets – made with IPSC, IDPA or similar shooting sport in mind, where lots of bullets are spent during every training. Medium capacity box (100pcs) available here –…
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
(Buy me a coffee if they are useful to you thanks :-) Tip Me Here 7 Pcs Set Radius Jig Router Templates, Router Templates for Woodworking "Only 6 in the photo but you will get 7 files" Corner radius jigs allow for easy and repeatable…
Miscellaneous NPCs and PCs for your TTRPG games
Halloween Cookie Biscuit Gingerbread Cutter (approx 45-50 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
made a insert for the slim packout 43pcs 3/8 impact set with a 1/2 to 3/8 icon reducer also with 1/2, 3/8, & ¼ impact drives from milwaukee it is tight fitting and made so the sockets don't move around. edit: made a v2 version i have yet…
LED tealight cover in the shape of a Fairy Tale Cottage I made two models, Square and Rounded, hopefully you'll like at least one of them. Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. My…
Christmas cookie cutters with star wars theme :)
This is a compact box that holds and protects up to 3 condoms so you can safely carry them with you in your bag. The 2mm thick structural sides and edges of the box make sure the contents cant get squished, the front and back have 1mm…
A set of stamps for polymer clay and creativity. The usual size is 10-15 mm for printing with a nozzle of 0.4 or 0.2. With the ability to scale only X and Y for a larger size. There are 18 stamps in the set
4pcs Hexagon Flowers Wall Art
For smaller printers, the model needs to be split in half in a slicer. U menších tiskáren je potřeba model rozdělit na polovinu v sliceru.
Christmas Cookie Biscuit Gingerbread Cutter (approx 55 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Holder for 10 pcs screwdrivers kit: https://www.temu.com/cz-en/-11pcs-screwdriver-set-with-magnetic-phillips-flathead-tips-chrome-vanadium-steel-ergonomic-grip-rust-resistant---tool-storage-case-g-601099592124931.html Optionally with hook…
Simple screwdriver holder for Ikea skadis pergboard system. back row: 5 x 12mm holes front row: 4 x 8mm holes You also need 4 x Skadis_Universal_Hook.stl from https://www.thingiverse.com/thing:2853257/files It has a bit of a loose fit…
~ ~ ~ 🇬🇧 English ~ ~ ~ New improved version to be found here - Improved Stabilo Boss holder - for 3 up to 26 pcs Holder for Stabilo Boss highlighters, from 3 pieces up to 26 pieces. From three to 13 pieces it's a one-row design, from…
3pcs Hexagonal Nature Leafs Wall Art
My takes on the various races and player character options of D&D are unofficial Fan Content permitted under the Fan Content Policy . Not approved/endorsed by Wizards. Portions of the materials used are property of Wizards of the Coast.…
Christmas Cookie Biscuit Gingerbread Cutter (approx 85 mm) You can change scale in the Fusion 360 File in Parameters Table, for make the cutters bigger (X and Y axis), without to increase the wall thickness. (See attached picture with…
Want to access even more models not found here in Prusa Printers? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 Patrons have access to all my…
This 54 pieces brain teaser puzzle is easy to print but hard to solve. Can you build a perfect cube using only the 54 included pieces ? Print settings: Brain Teaser puzzle holder Nozzle: 0.4 Layer height: 0.2mm Infill: 15% Support: no…
3pcs Poppy Flowers Wall Art
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
Pneumatic fittings collet clips kit card, I keep losing them this solves the problem…
***Edit - 01 May 2022: There are two sizes of this set on the market! To find the size of your set(small, big), measure the straight pry tool from end to end. If it measures 156mm from end to end you own the big set and you should print…
Remix of container for CR2032 batteries.
For slim cigarettes with 5mm diameter and 100mm lenght. Use 0.15mm print with random seam. Inside box size 54x12x101mm.
5pcs, Moon Phase Boho Wall Decor
Every model is at least in 3 sizes - approx. 3.5 cm (1.7 inches), 5.5 cm (2.2 inches) and 7.5 cm (3 inches) Folder structure Animals Bear Fish - 3 versions Pig - 2 versions Reindeer Nature Comet - 2 versions Holly Moon - 2 versions…
Rex - 352 Peterbilt Day Cab Front Read Carefully! - Rex is a modular truck system. This post is for the front section - More option to come - All the STL files you need to build the rollback truck is here free on printable.com. The…
A screwable Battery Case for 3 GoPro HERO 5, 6 or 7 Batteries
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
I made this wrench holder for a friend to replace his stock roller bag for his Bosch Professional wrenches. It should also fit other wrenches in similar sizes. I would recommend PETG as the printing material. Furthermore, the lid needs…
Print this base and use logo and mindflayer models from the original model. Changes in this base relative to the original: Added a chamfer to the lip that holds the logo in place, so that it can be printed without supports Sliced the…
Hours of engineering and the 3 Matryoshka ducks were born! Print-in-place, you will have 3 beautiful ducks. They float, so you can use them in the bathtub. The 3 ducks are in a "Matryoshka" configuration, so don't worry, on the printing…
made to be printed on infinante z, will not work on standard machienes, only requires superglue to put together, but alot of it. Print Settings Printer Brand: Creality Rafts: Doesn't Matter Supports: Yes Resolution: 0.2 Infill: 50-100%…
Update 2020-12-17: As i get alot of feedback saying that the loosefit version it so tight, i added a "extra loosefit" version today. Nominal measurement on a 1/4" bit would be 6,35 mm side to side so the tight fit version is 6,35 mm. The…
Rex - Rollback Rear Section - 1:8 scale 6x6 Read Carefully! - Rex is a modular truck system - This post is for the rollback section. More option to come - All the STL files you need to build the rollback truck is here free on…
Batman - Garden Gnomes I created two garden gnomes in the Batman style, I hope you like them. My print settings (PLA) : 0.16mm layers, 2 walls , 10%gyroid , Tree supports Gnome Cleric (01) Gnome Fighter (02) Happy Printing:)
This 190pcs design is a remix to the 100pcs hex bit holder by FinLepi.
I got a request for 6,5 Creedmoor 20pcs ammo box. So i made a 50pcs version as well for you who wanted a box for more ammo. The spacing is 50pcs/75,51x12,60mm between the insert top and bottom. Plz read the dimensions before printing. I…
Tool holder for 26 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 135mm W - 49mm H -…
Two LED tealight holders in the shape of a Rose Flower in a Heart. Fits standard size (37 mm diameter) tealights , but you can customize the size as you wish. My print settings(PLA): 0,16mm layers / 2walls / 10%gyroid / Tree supports…
~ ~ ~ 🇬🇧 English ~ ~ ~ This is an improved model to the already existing Stabilo Boss holder - for 3 up to 26 pcs Holder for Stabilo Boss highlighters, from 2 pieces up to 26 pieces. From two to 13 pieces it's a one-row design, from two…
Nice small carrier for 4 beers or soda. Not much to say…Prints without support. I printet it with 0,2 layer height and 20% infill, skirt, and no support. Came out fine, but needed a little sandpaper in the top of the holes.
Hi, i need 5 slotted holder for cheap chinese red handle 5pcs diamond needle file set. you can use for deburrring tool spare blades, allen keys etc. hole diameter is 6mm . and 40mm deep
I needed to transport 16 pcs and 15 pcs was not enough, therefore I made 16 + 1 back up, total 17. Also middle row is shifted so its between two side rows. I like it more.
Designed to hold 3 64x64mm sleeves condoms so they stay protected in your pocket I included my freecad original files if you want to modify or improve this model Printed at 0.3 layer height Have fun and stay safe !
A holder for Vallejo paint bottles, holds 24. Bottles come in and out nicely and without effort.
Tool holder for Power Bits 40pcs with Connectors. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 152,59mm W - 101,00mm H -…
For local soap production in the Gambia, for molding up to 12 soaps with same size and shape simultaneously. it is a fast and economic way of soap production in the Gambia. Print Instructions: PETG, 0.2mm layer height, partitions 100%…
Simple holder for 5 files (or really anything that will "lock" on 7mm diameter hole)
AIYIMA 2Pcs 2 Inch Portable Audio Speaker 4 Ohm 8 Ohm 10W Mini Full Range Sound Loudspeaker DIY Multimedia Speaker Home Theater https://www.aliexpress.com/item/1005005997167223.html?spm=a2g0o.order_list.o
The top and bottom of the cigarette case Lighter compartment Hinge connected by a piece of filament Lock
Das Modell ist auch 2-teilig, aber ohne Kleber einfach zusammensteckbar
BAHCO brand chisel set holder for your workshop to easily gain acces to all chisels. Fits the 6 pcs chisel set. Printing settings layer height is not critical, I used 0.20 mm Printed on X1 Carbon at 100% speed (normal) no supports needed…
Tool holder for 12 pieces Combination Spanner Set. We provide two versions to download: Screw: 4mm holes for standard screws for mounting on wooden or stoned walls Pins: for peg boards of standard size Sizes: L - 142mm W - 51,930mm H -…
Tray for 25 or 42 diamond painting bottles Ø26mm Print instructions layer: 0.2-0.3 infill: 15% supports: no bridge: yes (tray)
Very small puzzles that will give you a hard time. It's nothing easy. Hint: The solution is engraved in on the backside. Print instructions I recommend printing puzzles in four different colors. It looks amazing. Enjoy!
The model consists of 24 pieces that need to be arranged in a way to form a cubic knot structure. I love brain-teasers, so my first model had to be a puzzle-like model. The brain-teaser contest is a great reason to finally learn some CAD.…
Heavily inspired by this design, though it is modeled from scratch: https://www.printables.com/model/494301-gridfinity-wiha-7pc-precision-screwdriver-tray-for I did this so that the sets would match nicely in my drawer :) This design…
The top and bottom of the cigarette case Hinge connected by a piece of filament Lock
Background NPCs and a few props. Suitable for an Arabian Nights setting.
Suitable for an Arabian Nights setting.
Most nozzle boxes are for a high number of nozzles. I don't own that many nozzles (yet), but I liked the design of Julia Ebert's nozzle box. Thanks to the uploaded STEP files, I was able to change the box to fit 6 pieces of E3D V6…
4pcs sea creatures Wall Decor
3Pcs Classic Lotus Flower
This is a (by far) the simplest AA storage box designed for rapid printing. it fits 36 AA batteries with ease of access. It's designed for rapid printing (0.6 nozzle) with appropriate wall thickness to match 2 perimeters with the…
Wanted a bunch of tiny hover APCs to use playing Battletech so created these. Resin only as they are very small (you could print them larger as well but still not FDM friendly).
Characters from Diablo II Resurrected.
Find out everything you need to know about the battery box on my blog: https://nerd-corner.com/3d-printed-battery-container-for-cr2032/ or https://nerd-corner.com/de/3d-gedruckter-batteriebehaelter-fuer-cr2032/
The first Larzuk pose has a version without the tools on his apron for easier printing.
Gridfinity - Metric 19 pcs Drill Bit Set 1mm to 10mm
I have an Eastwood PCS250 powder coating gun. Here's my funnel to fill the gun's bottles. 3MF and Fusion 360 file included. Printed with 1.2mm PLA layers, no support required.
This 285pcs design is a remix to the 100pcs hex bit holder by FinLepi.
Simple holders for 18650 Batteries: 4 batteries (2x2) 9 batteries (3x3) 10 batteries (2x5) 15 batteries (3x5) 16 batteries (4x4) 20 batteries (4x5) 24 batteries (4x6) 25 batteries (5x5) 30 batteries (5x6) 35 batteries (5x7) 36 batteries…
Guys, now is the time that you prove your wife that the purchase of 3d printer was not the waste of money!!! Now you can make her this beautiful nail polish stand and proof her that you were right, and she was... less right! Y'all needed…
Background NPCs from Diablo II Resurrected.
Instead of a handlebar bag, you can attach this drinks crate for 6 x 0.5 l cans to your KLICKfix mount. It is printed in one piece with the adapter plate, e.g. PETG Large enough for 6 beer cans, but also small enough for a standard…
a simple egg holder, stores 10 egg , printed in one piece
Bring the ultimate cozy vibe to your home this season with the Minimalist Autumn Japandi Collection. This set includes four beautifully designed, nature-inspired models: a wise owl, an adorable hedgehog, a classic acorn, and a modern…
This is my second project of JBC Soldering Iron Tips Storage Box for 11 tips and 8 tweezers. You can easy attach it to your JBC Soldering Station by M4 screw at the left side. If you want to attach it to right side - just print in mirror.
Background NPCs from Diablo II Resurrected.
