Wyniki wyszukiwania: pikes

Sortowanie

331 modeli

P
PrintablesPsi-
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
829
Polubienia
296
Ocena
5
P
PrintablesJan Votoček

Worx Landroid wheel spikes for better grip

A spikes for better grip that helps a landroid going uphill or in a sharp corner

Pobrania
417
Polubienia
30
Ocena
5
P
Printablesilikeapples12

A brick with spikes

IMPORTANT: Print the bricks with line width set to 0.45. You may need to adjust flow before the bricks stay together well. If the bricks are too loose - add 1%, if they're too tight - reduce by 1%. The spikes can be very sharp. Don't…

Pobrania
233
Polubienia
33
Ocena
5
P
PrintablesExtra Fox

Speaker Carpet Spikes

I designed these carpet spikes for use on my subwoofer because I didn't really want to buy any and I have a 3D printer. I was largely curious if carpet spikes made any sound difference and while I'm not an audiophile I think I can answer…

Pobrania
106
Polubienia
26
Ocena
0
P
PrintablesSergey Mizerin

Ball Bearing Fidget with spikes and without

These are fun fidget toys that I made to practice revolution in onshape and to test printing in place. There are two variants of it one with spikes and one without any. You will need supports to keep the balls suspended in the air to make…

Pobrania
55
Polubienia
9
Ocena
0
P

Moss Pole - Improved bottom - Spikes

I have created my own version of the improved lower part for the moss rod. https://www.printables.com/cs/model/316281-stackable-moss-pole-climbing-plants-support The star is beautiful, but it doesn't stick in the clay very well. Easier to…

Pobrania
41
Polubienia
3
Ocena
5
P
PrintablesPanarea

Bird Deterrent Spikes

I made this to fit a 1" x 1" bar on an exterior light. 1 Base and 3 Spikes need to be printed and glued in place. Gcode and STL provided and images of the layout.

Pobrania
40
Polubienia
4
Ocena
5
P
PrintablesIcenor

Bird Deterrent Spikes with Mounting Tabs

Bird Deterrent Spikes with Mounting Tabs Prevent birds from landing on ledges, fences, and other surfaces with these easy-to-install bird deterrent spikes . Designed with 90° mounting tabs , this model is perfect for outdoor use and…

Pobrania
25
Polubienia
4
Ocena
0
P
PrintablesDavid D

Print Flat Bird Spikes

Keep pesky birds, squirrels or other creatures off your stuff with these defensive spikes. This brand new design is printed flat for speed and printability. It uses very little plastic compared to other designs on Thingiverse. The end…

Pobrania
1917
Polubienia
246
Ocena
4,89
P
PrintablesHappyHacker

Rope bondage spikes | Shibari thorns (round)

Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…

Pobrania
1810
Polubienia
244
Ocena
5
P
PrintablesPrinttX

PET Bottle Watering Spikes Slow Watering

Update 23/09/2023: I have tested the single point water spike and found that the hole was to small so it printed solid i have now made a v2 and made an adjustment so the hole is about a 1mm in diameter and prints without closing up…

Pobrania
1223
Polubienia
119
Ocena
4,57
P
PrintablesKaot93

Parkside PMRDA / PMRA robotic mower Spikes

I was displeased with how well my mower was moving on my uneven lawn, so i designed and printed some spikes. They can easily be screwed in the wheel with small wood- or metal screws. The design can be a bit up scaled but it fits well how…

Pobrania
898
Polubienia
65
Ocena
5
P
PrintablesPrintedByMark

Spikesnout from Horizon Forbidden West

Add some stat buffs with the Spikesnout's unique abilities! This machine is to scale with the official board game and stands on a 45mm base. It is intended to be printed in one piece (with the base) for stability. All credit for character…

Pobrania
740
Polubienia
121
Ocena
0
P
PrintablesJoe

Bird spikes

I printed ours out of PLA and this is their third winter on our roof, after having been attached with a hotglue gun. When placed in sufficient quantities and strategically placed, they work well at keeping the pidgeons out of the little…

Pobrania
725
Polubienia
63
Ocena
5
P
PrintablesHappyHacker
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
678
Polubienia
141
Ocena
5
P
PrintablesJAW

Cat Repeller Spikes

I like to see you make and review! The neighbourhood cats make a habit of jumping on my garden hose reel. This can't handle this well so that's why I designed this and attached it. Advice: carefully remove it from the bed. The design may…

Pobrania
567
Polubienia
89
Ocena
5
P
PrintablesAran J.J.

Spikes for helmet

DISCLAIMER: Adding elements to the helmet can be DANGEROUS and even ILEGAL. DISCLAIMER 2: Original 3D designer: SergiLorenzo Therefore, they must be printed on flexible material, which does not interfere with the operation of the helmet.…

Pobrania
560
Polubienia
116
Ocena
5
P
PrintablesOpenTheSauce

Bird spikes for balcony

A simple spike strip I made for my balcony handrail, to keep birds from resting and doing their business there. Nothing fancy as such. Dimensions copied from some strips I had purchased too little and ran out of. They came with two-sided…

Pobrania
516
Polubienia
48
Ocena
5
P
PrintablesHappyHacker

Rope bondage spikes | Shibari thorns (Flat V2)

Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…

Pobrania
489
Polubienia
87
Ocena
5
P
Printables3dgranddad

Simple bird spikes

Just a simple print created in Tinkercad to keep the swallows out of my carport. Designed to fit most build plates and if they are too small or too large use the resize option in your slicer of choice. PLA is fine as they do not take a…

Pobrania
485
Polubienia
53
Ocena
0

Articulated lizard with spikes

articulated lizard remixed in blender

Pobrania
482
Polubienia
55
Ocena
5
P
Printablesthall72
Pobrania
465
Polubienia
69
Ocena
5
P
PrintablesHanzo 3d

spikes for crocs

perfect for print in TPU if you want flexibility or PLA if you want rigid piece.!!!!

Pobrania
453
Polubienia
171
Ocena
5
P
PrintablesAbílio Costa

Parkside robot lawn mower wheel spikes

Add some extra traction to your Parkside robot lawn mower! These fit really tightly to the wheel.

Pobrania
416
Polubienia
44
Ocena
0
P
PrintablesP3D

Moss pole head with spikes

One with medium spikes, one with long spikes - both tested. Paint little support in the middle and your good to go. Print everything else according to the original model from Wivry. I have made my own improved Moss Pole, if you are…

Pobrania
408
Polubienia
58
Ocena
5
P
Printableslegobrickman

The Ice Spikes Minecraft Set (21131-1)

This is the Ice Spikes set. Like this and check my other sets if you want me to share more. The instructions are at the bottom of the files, and the specific colors you need to print with are in parentheses in the folder's name, but any…

Pobrania
387
Polubienia
79
Ocena
0
P
Printablesthall72
Pobrania
387
Polubienia
51
Ocena
0
P
PrintablesCrazy3D

Lucky 13 Sword with Spikes Diablo Style

Lucky 13 Sword with Spikes Diablo Style If you like it --> press like it :-) Sword for the funny lucky 13 figure, which is inspired by the Diablo Hack and Slay game. I use this hands to use the sword, they work better than the original…

Pobrania
383
Polubienia
105
Ocena
0
P
PrintablesHappyHacker

Rope bondage spikes | Shibari thorns (flat)

Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…

Pobrania
380
Polubienia
67
Ocena
0
P
PrintablesDr.Peter

Navimow Terrain Spikes

Glue the cap on. print solid or with 40+ infill.

Pobrania
357
Polubienia
21
Ocena
5
P
Printablesthall72
Pobrania
344
Polubienia
57
Ocena
0
P
Printablesminishaven

Ice Spikes Frosthaven MagHex

I remixed the original Ice Spikes by bdworks4 to create a more even surface so that a figure can stand on the terrain and I added a base to make them fit into MaxHex tiles.

Pobrania
334
Polubienia
33
Ocena
5
P
PrintablesHungryLama

Gardena R40Li Wheel with Spikes

I've used the wheel design and added spikes on one side for better grip.

Pobrania
325
Polubienia
20
Ocena
5
P
Printablesthall72

Lego Compatible (15727.dat) Minifig Armor Shoulder Pads with 4 Spikes

This model is compatible with the lego system.

Pobrania
306
Polubienia
52
Ocena
0
P

Speaker Spikes & Washers

Speaker Spikes & Washers Modelled in muscad, rendered into OpenSCAD, rendered into STL. The muscad version used here is fork that is still in development, which adds fillet & chamfer operations to cylinders. You can find it here . Four of…

Pobrania
304
Polubienia
25
Ocena
4,5
P
PrintablesDiAleksi

Covid19 face shield without spikes for holes

There are many versions for face shield headbands. But all of them require making holes into the protective sheet by punching or laser cutting. Too complicated in my opinion. Here is my version of the headband without pikes for holes,…

Pobrania
298
Polubienia
2
Ocena
0
P
PrintablesGörbe Stúdió

Easy to print bird spikes

It is so to print Material: PLA/PETG etc. Size: 25cm long With 2 screw holes, but i fitted it with double sided tape

Pobrania
294
Polubienia
30
Ocena
5
P
PrintablesColton X

Print on Fabric Test (Long Spikes)

This is just a simple long spike version of a test print for printing on fabric. I have a short spike version as well for those who want to try it with less height. I can also add a tutorial for fabric to use as well as procedure if…

Pobrania
289
Polubienia
49
Ocena
5
P
PrintablesParadogo

Hedgehog spikes fabric

Included are a couple of sizes that you can just pop in the slicer and get going. Also I have included a .blend file with the model for more tinkering, increase - if you want a custom size , just increse or decrese the array modifiers…

Pobrania
270
Polubienia
102
Ocena
5
P
PrintablesMeltMotive

Halloween Bat Headband | Bat Wings & Spikes

🦇 Halloween Bat Headband – Spooky 3D Printable Costume Accessory Add a spooky touch to your Halloween costume with this bat-inspired headband , featuring large bat wings and decorative spikes. Designed as a fun and eye-catching 3D…

Pobrania
268
Polubienia
51
Ocena
4,5
P
Printablesthall72
Pobrania
259
Polubienia
52
Ocena
0
P
Printablesgrappeq

Modular bird spikes

I really like pigeons but I don't like cleaning their shit so recently I have embarked on a quest to stop them from nesting on my balcony for the third time. Those models are the results of that struggle. Spikes can mounted to different…

Pobrania
246
Polubienia
30
Ocena
5
P
PrintablesMini3DACG

Guitar spikes

Guitar spikes

Pobrania
241
Polubienia
44
Ocena
5
P
PrintablesThyDayWalker

Bird Spikes for Wide Fence

Got chickens or other birds that climb on top your fence…? Do the commercially available options not work because you need something beefier…? Well, look no further! Bird Spikes that can be fastened to the top of a fence - tested against…

Pobrania
238
Polubienia
23
Ocena
5
P

Skull with Spikes Shoulder Pads

There is a 30% discount on STL files for all Patrons of the DakkaDakka store on Patreon. Check out this month's release patreon.com/dakkadakkastore This Shoulder Pads perfectly fits for Warriors with 38mm height. 2 versions of files are…

Pobrania
232
Polubienia
52
Ocena
5
P
PrintablesTentaclya

Dragon dice tower with spikes

Dragon Dice tower with spikes to prevent dices from escape

Pobrania
232
Polubienia
37
Ocena
4

Improved / repaired spikes for ReProps's "Majora's Mask from Legend of Zelda"

I'm not into it, but I was seeking it for Christmas gifting for a loved one who is into it. Here on Printables, ReProps's model (which this remix seeks to improve upon) was the only one I could find for "Majora's Mask from Legend of…

Pobrania
226
Polubienia
82
Ocena
0
P
PrintablesVist
Pobrania
225
Polubienia
33
Ocena
0
P
Printablesthall72
Pobrania
215
Polubienia
46
Ocena
0
P
PrintablesKlausen

Gloomhaven Obstacle Spikes 2-hex gap fixed

ShadowJak's version on Thingiverse had a very small gap between base and model, which showed as errors in some slicers. For this remix I fixed that by moving the model down to the base.

Pobrania
215
Polubienia
18
Ocena
5
P
Printablesthall72
Pobrania
207
Polubienia
38
Ocena
0
P
Printablesmake|mod|mend

Weather Station Rain Gauge Bird Spikes

It's important to keep bird droppings from getting into the rain collection funnel of your weather station, so bird spikes are an important addition. This spike ring is designed to fit funnels that have a 118mm outside diameter, which…

Pobrania
202
Polubienia
31
Ocena
5
P
PrintablesTonyW

Cat deterrent spikes

Cat deterrent spikes for the top of your fence. These have quite a thin base, but are quite strong enough. Simply screw them to the top of your fence to keep cats away. Two sixes, 250mm long and 80mm long. This should do you but you can…

Pobrania
200
Polubienia
24
Ocena
5
P

SUCCULENT PLANTERS - SPIKES DIAMETER 85MM MODEL

This planter is designed to cover the standard plastic planter with a beautiful geometric design and contain the water from drainage holes. You can plant directly in the 3D printed model but be aware that 3D design do not have drainage…

Pobrania
200
Polubienia
48
Ocena
5
P
PrintablesLisarie

Spikes 35mm

Es sind 9 , 35mm hohe Spikes die vielseitig verwendet werden können. Ich persönlich habe die simplen Spikes für Figuren erstellt, um sie besser in der Steckmasse zu befestigen. man kann sie auch selber so Skalieren wie man sie braucht

Pobrania
199
Polubienia
8
Ocena
0
P
Printablesspencer malone

Voronoi Anti-Cat Spikes

Pulled away from it's crucially important duty of making public spaces unlivable, defensive design can finally have a real purpose; keeping cats off shit. I use it for my PC, I plan to put it on top of my enclosure. Stretch, duplicate,…

Pobrania
199
Polubienia
34
Ocena
0
P
PrintablesKevin

Yardforce Classic 500 Wheel Spikes

These spike are a quick model that lips onto the inside edge spikes of the original wheel. they should work by just clipping them over the inside spikes on each wheel making 8 extended spikes per wheel. The 17 mm spikes are probably too…

Pobrania
185
Polubienia
16
Ocena
0
P
PrintablesFleedwood

Bird Spikes

Size of the spike plate is adaptable in scad file. I've printed it in PETG, but couldn't reduce stringing to a reasonable value, so I added covers for the spikes, which can be ripped off after printing.

Pobrania
181
Polubienia
13
Ocena
0
P
Printables3DNightmare

Sipikes Collar with Interchangeable Spikes

Do you want a unique and stylish collar that reflects your personality? Sipikes is the perfect solution. With its interchangeable spikes, you can create your own custom design and change in whenever you want. Sipikes is made of…

Pobrania
181
Polubienia
49
Ocena
5
P
Printablesthall72

Lego Compatible (88001.dat) Minifig Weapon Club with Spikes - Small

This model is compatible with the lego system.

Pobrania
180
Polubienia
26
Ocena
0
P
Printables@GUTEK@

Parkside PMRDA/PARMS lawn mower spikes

I've prepared two models with different spike types. Original model: https://www.printables.com/model/1325786-traction-assist-wheel-for-parkside-pmrda-20-li-b2 3D printing spikes for Parkside robotic lawnmowers. Compatible with the PMRDA…

Pobrania
178
Polubienia
12
Ocena
5
P

Croc Spikes

A pointy cone spike to put on crocs.

Pobrania
173
Polubienia
41
Ocena
5
P
PrintablesMeeKaaH

Fusion Bando V2 - Protection bras & moteurs Spikes

Protection de bras et moteurs avec spikes et supports intégrés

Pobrania
172
Polubienia
4
Ocena
0
P
Printablesvidision

Human Skulls on Spikes (x3)

All three pieces are meant to be printed separately. I recommend printing the skull with supports.

Pobrania
171
Polubienia
95
Ocena
4,67
P
PrintablesQbitPrime

Duvet / Blanket Cover Clip / Holder (Improved V2 with Spikes)

Fusion 360 file included with various clip options Inspired by @Variable's model. Allowed to secure Duvet Cover / Blanket Clip together. Added new clip with spikes.

Pobrania
170
Polubienia
26
Ocena
5
P
Printableschris

PVB Vapor Smoothing Spikes

140x140x25 mm spikes made for a vapor smoothing PvB prints in a round jar Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .02 Infill: 10 Filament: Prusament PLA Gravity Gray Category: 3D Printer…

Pobrania
169
Polubienia
32
Ocena
5
P
Printables3D Print Fun

Small bag clip with spikes

I remixed this bag clip from scratch in Fusion 360. I added some spikes for a better grip. Printed in PLA and PETG, works just fine, no support is needed Print and enjoy.

Pobrania
168
Polubienia
24
Ocena
5
P
Printables5komag

Spikes

If you liked this model please Like this

Pobrania
165
Polubienia
19
Ocena
0
P
PrintablesZac M

Barricade Spikes

A small set of barricade spikes. Category: Props

Pobrania
161
Polubienia
17
Ocena
0
P

Cat spikes

I was tired of our cat laying on our dish drying stones so I made these. V2 has 20 mm spikes which makes them sharp but uses a lot of material. V3 has 12 mm spikes.

Pobrania
158
Polubienia
20
Ocena
0
P
Printablesduelago

Segway i108E Spikes

Printed in a single part on a big printer, or in two parts to fit the build area on a Prusa MK3. Attach the spikes with screws into the orignal wheels to improve the climbing performance on grass with the mower. You need to do some…

Pobrania
155
Polubienia
12
Ocena
0
P
Printablesporks0da
18+

Źródło oznaczyło ten model jako treść 18+.

Pobrania
152
Polubienia
53
Ocena
5
P
PrintablesTheCafeRacer

VIGORO EDGING STAKES/SPIKES

Yards spikes in a few different lengths for the Vigoro Edging Kit. The kits don't come with nearly enough spikes for complex shapes or areas where you need additional retention. Print in supplied orientation with 3 or 4 perimeters for…

Pobrania
152
Polubienia
35
Ocena
5
P
PrintablesSkeleton Dan

Caltrop (Makibishi Spikes) from Naruto

Source: https://www.models-resource.com/pc_computer/narutotoborutoshinobistriker/model/61272/

Pobrania
151
Polubienia
10
Ocena
0
P
PrintablesMatthew Forde

Wheelchair Handle Spikes

A spiked sleeve to attach to a wheelchair's handles and deter people from moving a wheelchair user without consent. No one design will fit all of the wheelchair handles out there so I have added a central trench to allow a zip-tie or a…

Pobrania
149
Polubienia
48
Ocena
0
P
Printableswillsside

Bird Spikes - Easy to Print!

Wanted a simple bird deterrent for our small garden. However, I wanted it to be really easy to print and not need supports. I designed this to be printed flat and without supports. It lets the spikes themselves be printed flat, and…

Pobrania
148
Polubienia
20
Ocena
5
P
PrintablesNickSpoonman

Self designed cable tray for RASA8 telescope (no spikes -> round stars)

Self designed cable tray for Celestron RASA8 telescope which will generate nor artifacts at stars (e.g. spikes) and fit two cables up to 6mm in diameter for the camera. Combineable with RASA8 Bahtinov mask (see my profile). settings:…

Pobrania
147
Polubienia
13
Ocena
4,5
P
PrintablesJudeTheDude

dummy 13 iron spider arms. (with spikes)

i took the og model adn added my own spikes.

Pobrania
143
Polubienia
33
Ocena
0
P
PrintablesMelabam

Anti-Calvary Spikes

Medieval defense anti-Calvary tiles to allow full surrounding of a location. These are 2x2 inches in base size. This is also known as Cheval de Frise. I have created two different straight designs and two corner designs. Several designs…

Pobrania
140
Polubienia
26
Ocena
0
P
PrintablesNeel Suley

Planetary Gear Spinner(With spikes)

It is a planetary gear spinner with spikes around it, for more satisfying effects. All one print.

Pobrania
135
Polubienia
10
Ocena
2
P
Printablesthall72

Lego Compatible (35035.dat) Minifig Shield Pentagonal with Spikes

This model is compatible with the lego system.

Pobrania
134
Polubienia
15
Ocena
0
P
Printablesthall72

Lego Compatible (60674.dat) Minifig Weapon Club with Spikes - Large

This model is compatible with the lego system.

Pobrania
132
Polubienia
18
Ocena
0
P
Printables3DPrintNovesia

Spikes (on Fabric)

Welcome to the world of Printing on Fabric!!! Its really simple! Just Follow these steps: Print 2-3 Layers Hit Pause Place the Tulle fabric Mount it with tape flat on top the printed parts Resume the Print When you use Simplyfied3D you…

Pobrania
131
Polubienia
51
Ocena
5
P
PrintablesTinyMtn

Pikes Peak Area 3D Map

TinyMtn Custom Pack 1 - Pikes Peak Area This is a package with a 3D model file of Pikes Peak and the area to the South, including Cripple Creek, Colorado, USA. Model scale is 1:250000 Model measures 4.1" x 3.1" x 0.46" (10.4 x 8 x 1.17…

Pobrania
125
Polubienia
18
Ocena
5
P
PrintablesExocet

Pikeslayer

After long time of experiments and trials I made another succesfull fishing lure, this lipless jerkbait, made especially for pikes. This fishing lure is traditionally fitted with a steel wire frame, unconventionally the frame is glued…

Pobrania
122
Polubienia
14
Ocena
0
P
PrintablesVitaminschorle

Spikes for lawn mower robot

no longterm proof jet, printed in PLA 0.6 nozzle, 3mm height. seems stiff enough to work well. Automower_spikes v5: have a look on the drawing if the dimensions fit to your needs. Improved Version with broader Spikes due to v4 had still…

Pobrania
120
Polubienia
6
Ocena
0
P
Printablescinci

Anti-Pigeon/Cats Spikes

These modular anti-pigeon spikes are designed to prevent birds from landing on fences, railings, balconies or similar surfaces. Each module measures 20 cm long, 3.5 cm wide and 4 cm high , and features a 3x14 array of sharp conical spikes…

Pobrania
119
Polubienia
15
Ocena
0
P
PrintablesMagig_I3Prusa

Terrain Wargame Fence with Spikes

prints also very fast in 0,3 with 10% infill HAVE fun

Pobrania
117
Polubienia
16
Ocena
0
P
PrintablesExitaph

Pikes Peak International Hill Climb terrain section

This is a map of the entire Pikes Peak International Hill Climb course in Colorado. For smooth results print on its largest side vertically. This is how I did it. For a topographical relief map print the model flat. Note: The file size is…

Pobrania
115
Polubienia
9
Ocena
0
P
PrintablesThrustmaster

THRUSTMASTER : T3PA pedals carpet spikes

Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Infill : 100% No support needed Materials recommended: PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: textured…

Pobrania
114
Polubienia
11
Ocena
5
P
PrintablesCastform5

Open Cage Stackable Plant Support Stakes - with flat spikes and locking legs

I found the original design to be a bit too flimsy and easy to bend with the regular round legs, especially when you have a tall plant that leans on it, because the legs could be pulled from the holes with ease. I recreated the design and…

Pobrania
111
Polubienia
16
Ocena
5
P
PrintablesNickSpoonman

Cable tray for RASA8 Telescope (for spikes)

Self designed cable tray for Celestron RASA8 telescope which will generate newton-like spikes and fit two calbes up to 6mm in diameter for the camera. Combineable with RASA8 Bahtinov mask (see my profile). settings: Pre-settings Prusament…

Pobrania
111
Polubienia
7
Ocena
0
P
Printablesaskgam

Reverse spikes for 13 dummy arm

experimenting with models since im new and tought this would be a cool idea for my 13 dummy SUPPORTS ARE NEEDED

Pobrania
109
Polubienia
35
Ocena
0
P
Printablesthall72
Pobrania
108
Polubienia
31
Ocena
0

Assorted ground spikes

I made these to fasten/support things in my garden. Soccer goals, plant supports e.t.c. I printed them in Prusament PC, witch seems to be able to take considerable beating. But UV resistance might be lacking. PETG is also an option. Free…

Pobrania
108
Polubienia
16
Ocena
5
P
PrintablesMaker Print

Bird spikes

This model has two variants, one with a connecting linkage and one without.

Pobrania
108
Polubienia
15
Ocena
4
P
PrintablesGreenCopper

Flower Pot - Spikes x4

A new serie about plant or flower pots. This time with pyramidal spikes/arrows : "Spikes". There are 4 versions: 3 variations with arrows and one symetric. I recommend to make 100% concentric infill. It's best to use 0.2mm layers but…

Pobrania
103
Polubienia
14
Ocena
0