15 353 modeli
If you create BambuSlicer profiles feel free to add them here: https://makerworld.com/en/models/221532 The Planter is designed to be printed with a 0.4 nozzle (and the same line width). That way the blades of the spiral will always be…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena jednego wariantu
Nice modern dcorative plant pot or planter for your home. Most easy to print in 2 or 3 layered Vase mode setting. Prefered material - PLA filament. Happy printing!
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
A new design inspired by the wind and sand of our planet (and other planets to). Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Wydruk około 6,26 €–7,65 € nettoWstępna wycena jednego wariantu
An anti-sphere inspired plant pot, giving it a very spacy and futuristic design loking like it is coming from the year 2148 ! Your plants will love it! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
I recently watched Game of Thrones and it inspired me to create such a designe - we hope you like it! Looks great in modern interiors, fits all plants well. Best to print in 2 or 3 layered vase mode settings. Works with most filaments.…
Wydruk około 2,47 €–3,01 € nettoWstępna wycena jednego wariantu
~ Design collaboration with Azurefilm ~ A nature inspired plant pot! We hope you enjoy it as much as we did design it! Used Filament: This model was printed using Sage HS Matte PLA from Azurefilm. The Azurefilm team was so nice to send us…
Wydruk około 2,77 €–3,39 € nettoWstępna wycena jednego wariantu
A nice tradicional pot and planter for plants or flowers. Best to be printed in 2 or 3 layered vase mode settings - material: PLA Happy printing! :D
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
COMMERCIAL LICENSE // UNLOCK ALL FILES ====================== PRINT INSTRUCTIONS 6-12% infill 15% infill for tray 5 top layers 8 top layers for tray 2-3 outer walls. Tree supports for tray, build plate only. Fuzzy skin enabled for…
Wydruk około 8,17 €–9,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A nice and quick pot/planter for your lovely plants! they will love it We suggest printing it in a dubble layered vasemode - the outcome is nice and rather quick :D Happy printing!
Wydruk około 1,76 €–2,15 € nettoWstępna wycena jednego wariantu
!!! REPAIRED FLYING PARTS !!! CZ/SK Jedná se o model trojplošného letadla Fokker Dr.1. Jde o méně náročný model na složení. K dispozici jsou nové klapky (Flaps), při tisku buďte pozorní které soubory používáte (jsou označeny vždy buď OLD…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Roman Terrace Garden for your succulents? Yes, another succulent planter for your desk or home. The raised middle container is a great mid level water feeder to the side containers. This was printed using Gray PLA at a resolution of 0.2…
Wydruk około 13,68 €–16,72 € nettoWstępna wycena jednego wariantu
A simple but stylish, 70's inspired designer plant pot or planter. Present's itself best in matt fillaments and in light colours. Best to print in vase mode settings with 2 or 3 outter layers (thicker than regular vase mode). Works with…
Wydruk około 2,13 €–2,60 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 4,12 €–5,03 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 13,07 €–15,98 € nettoWstępna wycena jednego wariantu
A simple but playful design inspired by the small patterns of paws pressed on fresh concrete. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for…
Wydruk około 1,56 €–1,91 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Brim needed Scale it as you like :)
Wydruk około 7,23 €–8,83 € nettoWstępna wycena jednego wariantu
We know some of you have been waiting for this quite some time, so here it is! - The new Anti-Sphere Pot 2! (now with only 9 spheres in a row) Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura…
Wydruk około 2,10 €–2,56 € nettoWstępna wycena jednego wariantu
I do a reasonable amount of flying for work and it has always been a pain holding or propping up my phone so I can watch movies. I tried some low-tech methods over the years but this design is my current solution. I got inspiration for…
Wydruk około 2,87 €–3,50 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed
Wydruk około 17,45 €–21,33 € nettoWstępna wycena jednego wariantu
A quite unique 80's style plant pot design inspired by the amazing film called The shining! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a…
Wydruk około 2,20 €–2,68 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,22 €–7,60 € nettoWstępna wycena jednego wariantu
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! F14 Tomcat This is another plane for your collection : the F14 Tomcat. This kit is…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
A quick and that simple design using a generated voronoi structure, resembling the structure of a pyrite cluster. Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed No Brim needed Scale it as you like :)
Wydruk około 3,36 €–4,10 € nettoWstępna wycena jednego wariantu
Introduction “HAWk” is a flying wing concept designed for RC hobbyists that feels just as good to fly as an RC plane made from conventional materials. It’s printed in light weight PLA (LW-PLA) with most pieces in vase mode for maximum…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
Author: Emmett Lalish & ShawnGano Special herringbone planetary gear. The only way you can manufacture this piece is 3D printing as the interlocking gears cannot be assembled afterwards. Waste object (with wipe into infill) is pliers by…
Wydruk około 2,93 €–3,59 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 4,47 €–5,46 € nettoWstępna wycena jednego wariantu
A modern planter / pot design for your plants. it's easy to print and has a great ilusion of spinn in it :) I suggest printing it in 2 or 3 layered vase mode. Happy printing!
Wydruk około 9,17 €–11,21 € nettoWstępna wycena jednego wariantu
Modern 80's themed pot and planter for your house and garden plants (mostly inspired by bubble gum) Print settings: Vase mode (best to print in 2 or 3 layer vase mode [regular vase mode just with more outter layers]) Used materials:…
Wydruk około 2,75 €–3,36 € nettoWstępna wycena jednego wariantu
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 10,64 €–13,01 € nettoWstępna wycena jednego wariantu
Update: 08.10.2023 I added base with holes for M3 Screws. Use it when pins in your standard Base not fit well or broke down when printed. After some days of development and prototyping I bring you my ultimate plane launcher. Easy to print…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! C130 Hercules This is another plane for your collection : the massive C130 Hercules !…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed
Wydruk około 7,62 €–9,31 € nettoWstępna wycena jednego wariantu
An Art deco ispired planter or pot for plants. Best to print in vase mode (can be single or dubble layered - depends on the size) Happy printing! :D
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
An antique inspired plant pot design with the fill of quilted fabric Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter perimeters - for a stroneger print)…
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No Supports needed No Brim needed Scale it as you like :)
Wydruk około 6,36 €–7,77 € nettoWstępna wycena jednego wariantu
A small planter pot for Ikea succulents. Available with 2 leg options (short and tall).
Wydruk około 1,37 €–1,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A lot of you have requested that so here it is - a regular pattern Paw Pot design! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger…
Wydruk około 7,72 €–9,44 € nettoWstępna wycena jednego wariantu
A planetary gear with only 2 planets? Shouldn't that fall apart? The sun gear definitely can move sideways, but the assembly does not fall apart. This is indeed a strange thing - probably without any use other than being strange and thus…
Wydruk około 0,60 €–0,74 € nettoWstępna wycena jednego wariantu
Combine your love of Polaroid cameras and indoor plant life with this 3D printed planter shaped in the style of the Iconic Polaroid Instant camera. I designed this planter to be the exact size of a actual Instant camera, the exact…
Wydruk około 10,12 €–12,37 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (paint-on supports) Scale it as you like :)
Wydruk około 9,69 €–11,84 € nettoWstępna wycena jednego wariantu
This ancient crawler will silently protect your plants! Not so small interpretation of a guardian can be printed without hassle and supports of course :) Inspired by BOTW game, references; I recommend printing the “Back-head” first to see…
Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu
This model flies really well and looks really cool! Please let the print cool down fully before carefully removing the glider as to not unevenly bend the wings. For better gliding bend the wings and tail wings slightly so there is about a…
Wydruk około 1,28 €–1,57 € nettoWstępna wycena jednego wariantu
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! A10 Thunderbolt This is another plane for your collection : the fantastic A10…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! B17 Here is the first aircaft a the set : the famous world war two american bomber :…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
UPDATES 02/03/2024: STEP files added The idea of this print is to have plantes suspended in the edges of the aquarium, having only the roots sumerged in the water. The model has 2 pieces, the ring that is fixed by pressure on the edge of…
Wydruk około 7,24 €–8,85 € nettoWstępna wycena jednego wariantu
Hello Kitty Pot Plant There's a version without hole so can be used as a container Nozzle: 0.4mm Layer: 0.2 Could be print without supports
Wydruk około 4,10 €–5,01 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 11,27 €–13,78 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 6,00 €–7,33 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) Brim needed Scale it as you like :)
Wydruk około 5,03 €–6,15 € nettoWstępna wycena jednego wariantu
Baby Groot Head Pot Plant Nozzle: 0.4mm Layer: 0.2-0.28 (Recommended) No supports needed Scale it as you like :) Made the hole bigger so water can be drain better Model by Hanoch Hemmerich
Wydruk około 2,73 €–3,34 € nettoWstępna wycena jednego wariantu
If you're looking for my Bambu print profiles, they're at MW . If you're looking for my Bambu print profiles for version 2 , they're here. Update (10/2025): There is now a version 2 of the Plant Stem Support ! Now this doesn't mean this…
Wydruk około 0,49 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intermediate Level Forward Swept Wing RC Aircraft. Designed for PETG - will also print with PLA. Multi-Part Print, 700g of filament. Very Gentle stall characteristics, high stability, large speed envelope, and top speed with recommended…
Wydruk około 1,20 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2024-01: I finally realized why some users were complaining about the bad dimensions. It was meant for folding with the grooves out and the smooth side in. If you do it the other way around, it bends less and doesn't fit into the…
Wydruk około 3,05 €–3,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A small tablet holder to hook to an airplane table. Holding together by magnets The middle holder isn't really necessary, just made it to hold 2 devices a bit overlapping in the middle.
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint-On Supports, Tree support) No Brim needed Scale it as you like :)
Wydruk około 17,13 €–20,94 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 6,50 €–7,95 € nettoWstępna wycena jednego wariantu
A simple yet beautiful science design inspired by the looks and vibes from the atomic-punk game - Atomic Heart Used Filament: This model was printed using Urban Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some…
Wydruk około 3,01 €–3,68 € nettoWstępna wycena jednego wariantu
This is a parametric planter with a vented, self-watering reservoir and water level indicator. I designed this in Fusion 360 and have included STLs for a 4", cylindrical version with interchangeable smooth, fluted, and knurled variants in…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
Spring is approaching, and I wanted to refresh my plants, so here's a new take on the butt planter ! I recommend printing with supports (on the build plate only) because the raised base allows for drainage. The planter is 149x122x131 mm…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
Wydruk około 3,31 €–4,04 € nettoWstępna wycena jednego wariantu
Simple plant support (trellis) Two versions one with straight spikes printed without supports Second version printed with supports\ Material: PLA, PET-G, ABS etc. Layer high: 0,3 or lower
Wydruk około 1,06 €–1,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used Fusion 360 to design a Strawberry Pot, then 3D Printing to bring it to life. I'm going to grow some of my own food, and I LOVE strawberries! Learn how to make it yourself, just watch my tutorial! Print instructions This will fit a…
Wydruk około 13,14 €–16,07 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,39 €–11,48 € nettoWstępna wycena jednego wariantu
I am a very bad plant mom, and I was planning to build a closed loop soil watering system, but that is still on my to-do list! I remembered the trick my grandma used to provide fresh water for her chickens with an inverted bottle, and…
Wydruk około 5,74 €–7,01 € nettoWstępna wycena jednego wariantu
Bonsai Pot with Drip Tray, Drainage Mesh and Small Feet Looking for a modern, elegant bonsai pot? I was too — until I designed one myself! This set includes: A stylish bonsai pot with a drainage hole A matching drip tray to catch excess…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Fits 6.5cm (diameter) x 5.5cm (height) planter.
Wydruk około 7,30 €–8,92 € nettoWstępna wycena jednego wariantu
Simple and easy to print - Looks great in a modern interior. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended…
Wydruk około 1,82 €–2,22 € nettoWstępna wycena jednego wariantu
Famous Planes Famous Planes is a set of airplanes in kit cards you have to build. Those are perfect gifts ! You can find the whole collection here 😊 ! E3 Awacs This is another plane for your collection : the E3 Awacs, which is a detection…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 2,49 €–3,04 € nettoWstępna wycena jednego wariantu
This is a re-mix of a re-mix, based on this: https://www.thingiverse.com/thing:3442346 Note : If you want to use this as an actual planter, PLA prints can be "leaky." I took the precaution of giving the inside of the prints a coating of…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4mm Layer: 0.1-0.2 (Recommended) No supports needed Scale it as you like :)
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 7,59 €–9,28 € nettoWstępna wycena jednego wariantu
This is a part of the Botanical Collection available in our Printables Club. A geometrical design inspired by plant ornaments and crystal structures. Very easy to print and looks great in modern interiors! Print information: Recommended…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
A simple wind flow inspired plant pot. Used Filament: This model was printed using Aircraft Grey Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the pleasure to review this filament, and we can…
Wydruk około 3,61 €–4,41 € nettoWstępna wycena jednego wariantu
A perfectly designed gear bearing that is made to have minimal friction and is easy to 3D print it can also spin for up to 7 seconds! It's quick to print coming in at under 2 hours. This print also is beginner friendly and has a big…
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
This planter was designed to hold succulent/indoor plants, and does not have any drainage holes. The design can be resized to fit your needs, but the entire design by default is around 100 mm x 120 mm x 105 mm. In the pictures, the…
Wydruk około 5,90 €–7,22 € nettoWstępna wycena jednego wariantu
Advancent steam core planter or pot fo your plants. The main idea for the structure comes from a great and lovely designer here - Extrutim - He was so kind to allow me to turn it into a pot design (once again big thanks for that!!!)…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
We are for sure big fans of crystal structures here! So… Here is our newest model inspired by the great growths of Moon Crystals! We hope you enjoy it! Used Filament: This model was printed using ROSA 3D PLA-Silk Navy Blue The ROSA 3D…
Wydruk około 9,83 €–12,01 € nettoWstępna wycena jednego wariantu
Most self-watering planter designs print in two pieces: a planter, and a self watering insert. This one is just a single print. Versions: Two versions are available: Blank and Faceted. Both function identically, however blank prints…
Wydruk około 4,63 €–5,66 € nettoWstępna wycena jednego wariantu
Flexi-wing airplane model with flapping wings and spinning propeller when the button is pushed. Model size: 180mm wingspan, 130mm nose to tail, 50mm tall. All parts need to be printed at 0.15mm layer height with 0.4mm nozzle or better to…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Easy to print lightweight drip tray for the Pokémon Bulbasaur Planter. Catches the excess moisture and allows it to evaporate. Can easily be scaled up or down on the X and Y axis. Printable with all common nozzle sizes: .25 .4 .6 and .8…
Wydruk około 0,65 €–0,79 € nettoWstępna wycena jednego wariantu
An interpretation of a cell-based robot organism. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a lower…
Wydruk około 2,01 €–2,45 € nettoWstępna wycena jednego wariantu
I designed a 3d model of the famous spitfire. You can download it as one object or in printable parts. Also you can download .PART file if you want to edit it in solidworks This is my first attempt to design something that specials and…
Wydruk około 10,37 €–12,67 € nettoWstępna wycena jednego wariantu
Ribbon shaped plant pot- great for vase mode printing. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print) Recommended using a…
Wydruk około 3,80 €–4,64 € nettoWstępna wycena jednego wariantu
A time ago, I got curious about the possibility to print something like a paper plane... Therefore I tried to print one with as less material as possible, but still flying just great! This is what I found working quite fine so far! It…
Wydruk około 0,52 €–0,64 € nettoWstępna wycena jednego wariantu
A cat and dog to hold your little plant buddies. There's 3 different faces for each. Don't stare at the butthole too much. These have a self-watering feature. Use the included watering can or other pouring device and add water through…
Wydruk około 3,40 €–4,15 € nettoWstępna wycena jednego wariantu
Updated 2020-09-05: Created a 80mm in length version, as the 130mm seemed a bit long in many cases. Reflections at the end of summer of 2020: This strap have helped my tomato plants grow all the way to the sealing. I then moved them…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Star Wars R2D2 Planter Vase. Can we resized to any size that you like. Could also be sized to use as Pencil or Pen Holder or Candy Dish or Bowl. There is a small hole in the center of the planter to allow for water to not fill it up. I…
Wydruk około 22,08 €–26,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gems all around - this pot design is inspired by the structure of games. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 3,27 €–3,99 € nettoWstępna wycena jednego wariantu
A simple yet very creative design. Fits great into modern interiors! Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outer perimeters - for a stronger print)…
Wydruk około 3,58 €–4,38 € nettoWstępna wycena jednego wariantu
Printer: Prusa MK4 IS Filament: Coffee Bronze PETG (Metallic) Print Settings: 0.2mm SPEED Infill: 15%
Wydruk około 14,28 €–17,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) No supports needed Scale it as you like :)
Wydruk około 7,94 €–9,70 € nettoWstępna wycena jednego wariantu
Simple but effective support for plants that are not able to support themselves. Fits standard ⦰5 mm wooden plant sticks, but the size is configurable in the source code. You can use more than one support wheel on the same stick if…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed (Paint in support, use .3mf file)
Wydruk około 5,93 €–7,25 € nettoWstępna wycena jednego wariantu
Any feedback would be greatly appreciated . Could be use as a planter, pen holder, etc Nozzle: 0.4-0.8mm Layer: 0.24-0.4 (Recommended) Supports needed Scale it as you like :)
Wydruk około 9,27 €–11,33 € nettoWstępna wycena jednego wariantu
A simple yet very effective plant pot for your home. The design is inspired by the structure of an ancient column. Print information: Recommended vase mode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu
I have a new version ! Ich habe eine neue Version! Ein Moosstab für die spezielle Wuchsart der Monstera Dubia. Kann natürlich auch für andere Pflanzen genutzt werden. Der Moosstab ist steckbar. Habe es mit Support gedruckt. Meine…
Wydruk około 6,47 €–7,90 € nettoWstępna wycena jednego wariantu
