Liczymy pasujące modele…
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
I needed a way to hold my sponges that allows them to drain and dry easily (not stacked up on top of one another), so I designed this quick model. It holds a scrub daddy (I cannot recommend this enough), a regular sponge, and another item…
Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…
Sponge Bob Square Pants. Removed version with thin legs. Fixed multiple shells. added .3mf and .gcode (10/6/2023)
A hydroponic growing lid designed for plant propagation, rooting cuttings, and simple water-based growing. The lid holds multiple small growing baskets above a glass, jar, or container, allowing plant stems and roots to stay supported…
The story: Wanted to print small case for condoms which could be thrown in a bag and forgotten about without worry that the condoms will get damaged, because you know you should not keep condoms in a wallet. I could not find a single…
Accurately bending leads on radial, through-hole components like capacitors and resistors has never been this fun! :D Inspired by the fancy tools used by the talented Marco Reps in his GPS Nixie Clock video , I modeled a Biegelehre from…
Dust filters are especially useful if you have some dusty spools of filament that you want to print from or if you have pets at home. It protects your nozzle from clogging. This model prints without supports (even the nose was printed…
Update: An alternative version available now! The flashlight slot is moved more forwards. This leaves more space on the handguard for your hand, making it more comfortable to hold. The mounting screw is moved outside of the handguard, so…
I couldn't find a yoyo model for a standard 608 ball bearing, that's why I created my own. I designed it with the specs of commercial unresponsive yoyos in mind: 55mm diameter 36-38mm width 54-60g weight Turned out that the yoyo can not…
Goes into Tomy Gacha gashapon vending machine
This is a dispenser for tampons. Made for diameters up to ca. 20mm and a length of 55mm, e.g. “o.b. comfort super plus”. Holds around 15 - 20 pieces. Ideally the pieces roll down the slope. Sometimes they can get stuck. A little shaking…
I found a printable sign of the Prancing Pony Inn logo on Thingiverse, but not here. Since I didn't want to just rip the author off on thingiverse, I decided to make the model myself from scratch based on a sign I found online, using…
The Reference is an unresponsive yoyo, designed around Fluid Printdynamics' 3d printed yoyo spacer kit. It was created by Luftwerk's Jeffery Pang to facilitate 3d printed yoyo iteration in 2014. Kits are still available for purchase, and…
I love the original design but it's way too big. Simply scaling it down for my needs resulted in stretched an ugly hexagons, so I reworked the tray insert from scratch. I printed the tray in white Hatchbox PLA at 0.1mm layer height and…
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Blue, Red. Quick Guide to changing filament~ Have some paper to push away extruded…
Hallo, habe mir Daten auf meine Bedürfnisse angepasst, da meine Spülenrandbreite nicht dem eigentlichen Modell entspricht. Original auf Thingiverse gefunden: https://www.thingiverse.com/thing:1747492
Magnets in the shape of miniaturized Shurikens, one of the Ninja weapons. In these models, all corners are rounded for safety. Models with realistic shape are available on the following page. “Shuriken Magnet — Ninja Weapons” About…
This was based on an unresponsive yoyo I purchased off Amazon. The design worked for me but it can definitely be improved upon. If you do make it please post the make. Thanks and good luck. Also here's the link to the youtube video on how…
Using as base of the hydroponictower a flower pot I had (with diameter 25cm) to change the stand and using an EHEIM-pump I added a top for water sprinkling and with tube mount for the 12/16mm EHEIM-tube. As top-parts I used the one from…
Clean up your table by consolidating your playing space! This playing card holder designed to support cards in a curved fan shape with two tiers. The fan shape allows for each player to see their own cards while shielding the cards from…
A compact and functional sponge holder designed to sit neatly behind the sink. The bottom features a gentle slope that allows water to drain directly into the sink, keeping your countertop clean and dry. The underside includes…
Remix from https://www.thingiverse.com/thing:2172585
small container to store small parts, easy labeling and easy removal of parts. now in final version 13.
PETG 4 perimetry 0.2mm vrstva při tisku více objektů použijte v PS volbu “dokončení individuálních objektů”, odstraní se stringy
Suitable for sponges with these dimensions: b=55mm l =90mm h=25mm Printer: Prusa Mk3s+ Supports: YES Resolution: 0.2 Infill: 20% Gyroid Notes: printed in Renkforce Silver PLA
Easy soap holder for your kitchen or bathroom, with small water outlet. You can modify everything in attached fusion document. If you remix it and post it, please let me know. If you have any questions contact me on ig: meller_filip
2inch Net cup for Hydroponics systems, non-stackable, print as needed. RECOMMEND PRINTING WITH PAINT ON SUPPORTS FOR LIP ONLY For use with Rockwool, not tested with clay.
Mimic : Borderlands : Weapons Chest Trap Gcode and 3mf come as split model so you will have to glue parts together.
This is a double compartment cylinder box that snaps together shut to allow transportation of dupont cables. I had the specific need so I build the box, the two half snap together snug. Maybe a bit too snug as you will certainly need a…
The original print was for wide mouth jars, this remix is for regular mouth (2 ³⁄8″ for the inner diameter and 2¾” for the outer diameter), print diameter is 67mm. The original was a 2 piece print, this re-mix is one piece. The original…
There wasn't a good holder for Tamiya Sanding Sponge Sheets, so I made one. There is a slot for each of the eight grit levels and the rack can be mounted vertically, or horizontal. Uses about 275g of material.
I noticed user Bethaney Call had mentioned in the comments that at some point in the past there was a planting module without diffuser sieve. As I figure plants with longer roots may get entangled in the sieve, I wanted to have a separate…
Um suporte para 3. esponjas , detergente e alvejante com drenagem embutida, projetado para colocar na pia 🧽.
Description This model is free and took a lot of work to create. If you appreciate this model, please leave a download and a like! If you print this model, please post a make. About this model SpongeBob driving a boulder! Inspired by the…
Not exactly a remix of that one but of this one https://www.thingiverse.com/thing:3405964 The box was printed in Marble PLA. Inside it you can fit the ESP32, a USB C Power Delivery Board and a LN298N Servo Controller. Basically it is a…
Some supports needed. Prints all in one piece so no assembly or putting parts together with glue required. Print time 2 hours and around 10.20gs of filament. STL file is small so I scaled the g.code and 3mf files to %250. Feedback is…
Replacement for Step2 Showers Splash Pond Water Table Part M, likely it will fit several other Step2 splash table sets. Unfortunately supports are required.
Source of the original Image this 3D-Model is based on “Mrson Graphic”'s Vector-Image https://de.vecteezy.com/vektorkunst/2180679-pferd-logo-vorlage-vektor-symbol
needs to be gloued to the boat.
Výplň 100%, bez podpěr a límce. Materiál PETG. Použítí pouze pro studenou vodu.
The Stoned Spatula From Sponge Bob Square Pants video game.
The example print file was sliced for PLA silk, the print pause in the last third of the print, is to insert a magnet (3x7x10mm) and it worked with a magnet of 2.5kg of strength without issue. The color stop is to switch to a contrast…
Rohrhalterung mit wiederverwertbaren Kabelbindern für Hydroponik-Anlage mit 6,3 cm Rohrdurchmesser. Damit können höhere Pflanzen vor dem Umfallen bewahrt werden. Um in meiner Hydroponik-Anlage auch höhere Paprikapflanzen aufziehen zu…
Easy to print, will take around 3.5 hrs for both files (legs + body) For the body infill 5% 0.2 quality For the legs infill 25% 0.2 quality (you may need to add brim )
Ask me if you would like a custom size template or other drilling distances The main model can hold 5 sponges, he is for sponges smaller than 115x70 . I used it for IKEA Metod furniture with a drilling distance of : ≈ 32mm x ≈49.75…
Mount a 3x4" downspout to a hand railing Details fits hand railing width 40mm vertical railing supports must be ~8-12mm in diameter includes zip ties routing around vertical railing, though not required Print Settings Fits on a Prusa Mini…
Print Settings Printer brand: XYZprinting Printer: da Vinci 1.0 Pro 3in1 Rafts: Yes Supports: Yes Resolution: 0,1 mm Infill: 40 % Filament brand: 1,75 mm Filament color: Black Filament material: ABS
Hello, Welcome to my profile, full of models and miniatures :-) I have for you Holders, gun hangers and others. For wall mounting or wooden cladding. You have 4 sizes from me: 60mm, 70mm, 80mm and 90mm. Just choose the color, material and…
My original Kratky model used canning lids that are made of metal. After a few uses they tend to rust. Luckily I found a regular mouth jar lid here on printables and modified it to add the rockwool cube holder.
Porta sapone da viaggio. Soap Holder
Support d'éponge inspiré de modèles existants. J'ai été obligé de le redessiner car le pont entre les 2 bacs était plus large que ce que je trouvais. Le modèle est fourni avec le fichier freecad pour adapter à votre dimension. Le fichier…
ganchos para colgar esponjas de baño en la ducha.
Las medidas de la foto están en mm por lo que realmente son unos 6'5 cm de ancho y 3'7 cm de alto aprox.
Hello, brainy Spongebob figure. Thanks for your download, enjoy the print!
Spona má v dolní části otvor, který je vhodné zpevnit vlepením dutého nýtu a nasadit do něj kovový kroužek.
EN: A device with hooks and a tray where objects can be placed, that is easy to attach to mounted parasols with a stand up to 39 mm, using a snap-on mechanism. Can be easily fixed in the desired position with 2 screws and, thanks to the…
Sponge holder for the kitchen sink, can also be used as soap holder. I recommend snug supports for this model.
Nalepovací organizér na vatové tampony.
Sponge/soap holder with hexagon motive for dripping excess water from the sponge/sponge.
This print will help to form the through hole component legs, the scale visible is in 0.X of an inch, example number 5 means 0.5 of an inch __________________________________ We upload those models for personal use only, free of charge -…
Trays for parts and other things.
I kept looking at my kitchen sponages either in a pan with soapy water or in a place I could not find. This allows for two sponages and a place for the scraper. It allows to drain the water back into the sink. Please let me know how it…
It might need to scale at 10%. No support needed.
Different models were combined to create attractive and easy-to-print beer pong trophies. Also, there were two different sizes to create trophies for the first and second winners. The naming label is not included and must be created by…
This is a costume wrench for unscrewing of the cap that keeps on the handle bars on ROG pony. It works but must be printed from good materials because the little pins can break off when you try to screw it down. PLA is not good enough !!!
2 ks spony z PETG + gumový kroužek z TPU zajistí hlavu odšťavňovače před vytlačením a odpadnutím během akce. Pardon, ale s odpuštěním pitomci od ETY už dávno nejsou české hlavičky a vyrábějí kšunty, které si musíte vylepšit, aby…
this build takes supports
Víčko na truhlíky aquaponie. Pro zabránění padání nečistot do systému. Ø 48 mm - prstenec do truhlíku
This is my sponge holder that has holes in it to water come out and dry the sponge, i used double tape to tape it to the wall.
Porta Sapone, Spugna, Shampoo, qualsiasi cosa per tenere in ordine la propria vasca da bagno o doccia. Enjoy !
This is a model for using when you want to add a tea light holder to something you want to design and print. It is sized for 99% of the tea lights out there, both LED and Candle tea lights. If you plan on using a candle tea light, make…
This is an organizer for batteries for BAHA hearing aid box PONTO 4. An arrow added to indicate used battery place. Try to use smaller nozzle (I have used 0.6mm) for better fit.
Hello, I have an Airsoft MP5K-style folding stock here, designed for a RIS rail (compatible with various other weapons as well). The stock fits perfectly; the locking mechanisms engage securely, with only minimal wobble. An excellent…
První verze magnetického sběrače špon, třísek a drobných železných předmětů. Potřební díly: krabička (od LTO pásky), závit. tyč, pružina, knoflík, výtisk. Inspiraci jsem nalezl na webu…
Info k tisku: Výplň 100%, kvalita 0,10 mm FAST DETAIL. Při tisku z PLA bez límce, při tisku z PETG nutný límec.
Would you like to make extra income selling these planters (and future new models)? Please feel free to check the models with the included commercial license here:…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these at your own risk. Update - 2/20/2026: If you care about the future of 3D printing……
Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…
NEW 3.0 revision now available on MakerWorld! https://makerworld.com/en/models/426056
NEW 3.0 version now available on MakerWorld! https://makerworld.com/en/models/426056 This is the 2.0 version: Now with more bounce, stronger, thicker, more fun! Prints without supports for easier post processing. Print with a 5mm brim,…
An airless ping pong ball! Seen with some of my other ping pong machinations ( https://makerworld.com/en/models/166872 & https://makerworld.com/en/models/207809 ). Legal weight is theoretically slightly high (based on design program and…
The original Modular Hydroponic Tower Garden 3D model created by boundarycondition is no longer accessible due to the user's account being deleted. To ensure the continued availability of this valuable resource, I am reuploading the model…
Simple but beautiful design headphone stand in two versions. (Long and shorter version) Print Settings: Layer Height - 0.2 Infill - 15% Walls - 2 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock…
🚨 UPDATE: Check out the improved V2 here: BOM: Printed with ROSA3D High Speed PLA Gray Say goodbye to soggy, smelly sponges. This drip tray features a functional wave pattern on the bottom that lifts your sponge (or soap bar) slightly up,…
The original Modular Hydroponic Tower Garden 3D model created by boundarycondition is no longer accessible due to the user's account being deleted. To ensure the continued availability of this valuable resource, I am reuploading the model…
Please keep all these small parts away from children and pets, some parts have pointy ends, and they could be a choking hazard too. Make or use these models at your own risk. There is an updated version 2.1 of this Dummy 13 Weapons Pack,…
A swim through structure for your fish! Includes: SpongeBob's Pineapple House Squidward's Easter Island Head House Patrick's Rock House Baseplate Instructions: Print the houses and the optional Baseplate glue the houses on the baseplate…
This is a Heavy Weapons Pack for the Dummy 13. It contains - Gatling Gun - Bazooka - Barrett M82 - 2x Desert Eagles
The Prusa i3 kit comes without a filament guide - this is a problem when using stiffer filaments on small spools. The filament tend to unwind and get stuck when printing. This filament guide is a two part solution, a base with a new…
This 3D-printable stand is designed to hold sponges, washcloths, and soap, ensuring that excess water drains directly into the sink instead of pooling on your countertop. Say goodbye to soggy sponges and messy countertops with this…
Notes: If you want to use this with an Arduino Nano build in a Gaggia Classic, please also print the Gaggiuino Optocoupler Case There are now two accessory parts: A stripboard mount and cable strain relief (see changelog). The stripboard…
Remix Dummy 13 Weapons Pack Version ORIGINAL: https://www.printables.com/model/681425-dummy-13-weapons-pack-version-20
BOM: Printed with ROSA3D Starter PLA Black Say goodbye to soggy, smelly sponges. This upgraded drip tray features a functional wave pattern that lifts your sponge (or soap bar) up, allowing air to circulate underneath and water to flow…
Model created by Toshiyuki Ishibashi
04. Jan. 2024 DE50 detailed with silencer (UGH) Additional holster variant 28. Dec. 2023 Redesigned the hands to ease printing 3MF file added 27. Dec. 2023: Revised as a set New armed hands New Desert Eagle 50 for UGH added New Holsters…
Kitchen sponge holder that attaches to the tap. Tested on PLA and PETG materials. Support is required, but is easily removed after printing. Designed for a 2.5 cm diameter tap and a 6 cm x 3 cm sponge. Print instructions - 0.4 mm nozzle -…
