176 modeli
you will need 12 hubs and 30 sticks to assemble one complete icosahedron. The sticks should fit tight. The large flat face points towards the center. Seems to work well with 0% infill and 2 perimeters
Wydruk około 4,14 €–5,05 € nettoWstępna wycena jednego wariantu
Connectors to connect 9 popsicles. For the (in Germany abundant "long") 11.5cm popsicles this results nearly in a square. And yes “Eisstäbchenboxunterteil” is one of these German tape-worm like compound words, it means “lower lid of a…
Wydruk około 1,38 €–1,69 € nettoWstępna wycena jednego wariantu
Popsicle Layered Fidget Toy 3D PRINTING SETTINGS Layer Height 0.2mm PLA works great 15-20% Infill Supports needed. Print in place. Dimensions of Popsicle: 2.75 in. X 5.5 in. x .75 in. I do not recommend scaling the print smaller due to…
I did not make these files just sharing them on this platform. You can find the original files here: https://www.thingiverse.com/thing:2907072/files (3) Different sized craft sticks. Regular = 114x10x2 mm Mini = 63x10x2 mm Jumbo =…
llavero con forma de helado facil de imprimir
Easily printable Popsicle maker. No supports needed and easy in use. The stick snaps into the lid. Fill the body with your favorite drink or fluid, put the lid on the body and place it in the freezer. After a couple of hours you should…
This is for standard size popsicle sticks which I measured to be 113mm x 9.5mm x 2mm. Print a single hub to test the fit of your popsicle sticks and adjust the XY Size Compensation until the stick is snug, but not too difficult to fully…
I designed this simple popsicle charm to add some personality to your Bogg bag. After having lost several of these charm-type decorations on both Bogg bags as well as on Crocs, I designed this charm to stay securely attached via a…
I have two small children and they love popsicles but they don't always eat them fast enough before they start to melt. I found a model on Thingiverse that had a tray where the popsicle could melt and then the kids could drink the melted…
So, I had a bunch of popsicle sticks laying around (let's just say I like “rockets") and figured I could create something nice out of them using my 3D-printer. I ended up creating a simple crate out of these with a currently 3D-printed…
No print support needed.
This is a mold to make popsicle/ice lolly/ice block/icy pole/ghiacciolo/paleta de hielo. I designed it to be easly printalbe. You don't need supports. It's composed by 3 parts, the stick, the cap and the mold. The first thing you must do…
Get those guys back in the freezer! I opted for an authentic wooden craft stick for the handle, but now there's a printable stick too; Thanks @LesimpressionsDega! The wooden sticks can easily be found at any craft store, and they are…
These models are replicas from the Make It Mini posicle set. You can make an endless supply of posicle sticks and stands, especially useful if you have the Make It Mini popsicle resin mould. On the left side of the pictures are the…
What can you do when the weather is so hot you might just melt? Don't sweat it! Grab a popsicle! Toys and dolls don't have to be exempt from the chilly fun either. This pack contains four popsicle designs and a stick: Traditional pop…
Bring childhood memories to life with this collection of 13 classic ice cream popsicle replicas. Each model recreates iconic designs that evoke summer nostalgia and sweet memories. Collection Includes: Astronaut Champagnebrus Filur…
Last night I was stirring ~500ML of epoxy with a popsicle stick… Suffice to say it was not fun at all… 20 minutes later this adapter was born. This simple adapter allows you to use popsicle sticks with your drill. Sure, there are lots of…
Uniform in size and shape, the stick is 4.5 inch length, 3/8 inch width and 1/16 inch thickness . Standard size popsicle sticks that are perfect for all ages and skill levels. Parts For assembly you will need: printed parts For parts…
Put Them in your favorite Ice treat!
This model is compatible with the lego system.
These are fun because they are supposed to be bad. Anyone who's opened a SpongeBob popsicle knows that the placement of the eyes/mouth/teeth can be way off. So there's pretty much zero pressure while building these because the worse it…
I'm new to CAD, this is my first upload. Great for pudding, fruit smoothie, or any other popsicles. Go crazy.
This is a very loud print-in-place whistle that looks a little bit like a Popsicle. I wanted a whistle that was light weight and very loud, but didn't take much air pressure. Hence, the Popsicle! Just print upright like its positioned in…
There are various types of models, including small models for keychains and larger sizes that can be used for cosplay. Some models also have holes for keychains, so feel free to choose. The models are made with the popsicle and stick…
You know, for the kids.
6-10 hours This is a fill assembly
This is a set of popsicle stick joints for 30, 45, 60, 90, 120, and 180 degree connections. Included is also a parametric model that can be used to create joints with any number of connections at arbitrary angles. An open-top model is…
Mess-Free Popsicle & Frozen Snack Holders
Idea based on https://www.thingiverse.com/thing:2564910 But completely redesign For the moment diameters available : 90mm - 25 stick 100mm - 28 stick 120mm - 30 stick You will need to get Popsicle Sticks you can find on aliexpress for…
Overview The popsicle/ice lolli was designed in multiple parts for ease of printing and to allow for easy multi-color. The model is around 250% scale of an original bomb pop. A bit of superglue is required to affix the parts. Printing…
print a bunch of these, get popsicle sticks, and build stuff. it seems to work well with 2 shells, 15% infill, and no supports the gcode download includes 6 hubs
My son loves dinosaurs and popsicles so I made a quick remix to these two files to create this dinosaur popsicle holder. Category: Kitchen & Dining
This is a simple popsicle holder. I made it for a family member who's son loves popsicles, and his parents aren't a fan of the mess they make. Simply insert the popsicle into the holder, and enjoy! The melted popsicle will collect in the…
A connector to make a dodecahedron out of popsicle sticks.
I liked the idea of a shelf made out of old popsicles but unfortunately the ones i found are only hexagonal ones. So i decided to desing my own rectangular one. Since its made with OpenScad and if some people want it, i may consider…
My mom likes to have the names of her plants in the pots because she has A LOT of plants and varieties. She used to make new popsicle sticks with the names of her plants every 3 months or so because they would fade in the sun, get dirty,…
Kids (both actual and at heart) love popsicles but hate holding something cold?! The solution is HERE!!! Jokes aside, this thing does work and my kids love it! This holder is designed to help push to popsicle up out of the sleeve as you…
Model By Angry Sonic This Was Made By Mintyfries
Popsicle Stick Mount with Lid (For HWS). The spacing in the front is to put a label tape of 9mm.
To assemble it you may need to insert, remove and insert again flipping the stick to the other side to fit 8 at once. They need to be tight fit to avoid using any glue. If you have any trouble, or need wider or narrower version contact…
Hello! This is a popsicle shaped container that I designed with the intention that every part could be printed without support and be easy to assemble. The two bottom pieces are snapped onto the stick piece to form the “lid" of the…
i wanted to make a popsicle stick bomb dut i did not have any popsicle sticks so i designed some
I could not find any scaled down popsicle models for my daughter's dolls, So I created 2 versions, 1 with bite taken and one without These are very small so use a low layer height suggested 0.1 No brim or support is needed, except if you…
These are a pair of connectors that can be used to build geometrical shapes out of popsicle sticks. The large shape is the inner core of a larger shape that I'll upload here when I build it.
Print the following: the Body 60 x minute rod 12 x hour placeholder minute hand hour hand (optional) decorative circle Use the .3mf files for infill, layer height, and other settings Mount as in cover photo Clock mechanics used : JUNGHANS…
A simple popsicle cookie cutter.
Never rush eating your favorite popsicle again when it begins to drip all over your hands. This popsicle drip guard collects the drip so you can enjoy your popsicle at your pace. 20.18 grams model consumption Supports needed Fits most…
Add a sweet playful accent to your collection with this Pink Popsicle flexi figurine, 3D printed in matte plastic and designed with a cute smiling face, dripping icing detail, and a soft candy-inspired color palette. Its segmented…
This design is a quick and easy replacement for a lost popsicle stick. It is not round like the original, but doesn’t need to be to function. It also prints with no support.
Model By Angry Sonic Prusa for Angry Batman
coated popsicle, you can use any colors you like
Small 1oz Popsicle Mold I designed for my Great GrandChildren. It is a no drip design. The “Lid” is made vwith TPU and fits tightly around the handle. You can slide the “Lid” down the handle if needed, to adjust to what is best for you.…
You will need 12 hubs and 24 popsicle sticks to assemble the cuboctahedron. the fit should be tight and the sticks won't slip out. There is also center facing slot for optional radial sticks. The large flat face points towards the center…
Simplemente imprime el modelo, con un 5% de relleno es mas que suficiente, elije los colores que mas te gusten y luego unelos usando pegamento. Simply print the model, 5% infill is more than enough, choose the colors you like the most and…
3D Printed Holiday Charm
Turn cheap, standard popsicle sticks into rigid structural models, geodesic domes, and prototyping frames. Most 3D-printed stick connectors fail because commercial wooden sticks have terrible dimensional tolerances. This system uses…
The point is to be able to recycle popsicle sticks into a fun shelving system. I like using woodfill PLA for making a really even look. I might upload some none hexagon versions…
This model is done in Fusion360. Its a Popsicle construction unit toy to build what you can imagine. The print is pretty simple. I printed it on Prusa Mini+ with 0,6mm nozzle and 0,2mm layer height. I used Prusament PLA Green and Vanilla…
one of the most emblematic carts in Mexico
PATRIOTIC POPSICLE BOMB POP STANLEY LID TOPPER 20/30oz and 40oz versions both included 3D realistic “patriotic popsicle” bomb pop ice cream if printing multicolored print standing up with supports and a brim for less color changes I…
simple protection to avoid kids from making a mess with the popsicles. easy to print, easy to carry, and easy to clean. kids will like the colorful ones! print them without supports. any rigid material will do. Ive added the fusion360…
Hello everyone! Someone requested that I upload the stand that I used in the photos for my Ice Cream Bar Shaped Container and Popsicle Shaped Container , so here it is! Along with additional versions that can hold three and two…
This is an updated and reusable version of a popsicle stick with holes.
I designed this popsicle based on Chris Pirillo's favorite stream sticker!
A popsicle holder to put your popsicle in if you are playing video games or are reading a book.
perfect to dip into small yoghurts and let it freeze :) Print instructions As Material please use PETG, as it is the best one for food. The thickness of the layers should be 0,15mm, as otherwise the small reliefs can not be printed.
This fun easy print is great for a quick and easy summer treat! Though I would advise if your going to eat out of it use food safe filament.
Do you enjoy eating popsicles but don't like how they are impossible to put down? You can put the stick in your mouth if you need both hands, but it will still drip. Why not treat yourself to a life of luxury with a Martini Glass Popsicle…
🎆 Red White Boom Earrings 🎆 Celebrate Independence Day in style with these fun and lightweight 3D printed popsicle earrings! Inspired by classic red, white, and blue summer treats, these earrings are the perfect accessory for Fourth of…
Popsicle TPU squishy! If you like this model give it a heart! If printed in TPU, it will actually squish! Based on the popular squishy toys, Needohs!
The container only opens if the correct combination of candy is selected on the four spinners. The in between dots are also valid positions giving it 8 possibilities per spinner giving it 4096 possible combinations. You have to print four…
Keep popsicle holders upright so that they can be set down
This base is a replacement for the one that comes with the Popsicle Molds Set from Chuzy Chef on Amazon. It works better by holding the molds more securely. I printed mine using PETG with a .6mm nozzle and .32 layer height on a Prusa MK4.…
I printed these and then glued ice cream sticks or popsicle or ice lolly sticks to them to create a wooden finish like the Fractal North case. Cut sticks to 85mm.
A melted popsicle, perfect to have on your shelf during the summer, without making a mess. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: No **Resolution:** 0.2 Infill: 35 Notes: I use 35% infill with 2…
Requires 60 connectors and 90 popsicle sticks. There is one axis of symmetry that is indicated by a small dot. The dot faces away from the pentagon. To assemble combine all the pentagons (this will mean all the dots are facing out) then…
Ferris wheel to be made out of 20 4.5 inch (113mm) craft sticks. Its important when assembling to pick out the straightest sticks of the bunch. This will help with a better end result. You can use glue but not necessary. Test file…
Created these popsicle sticks in case we ever need them for a project. There are 4 sizes under profiles: Jumbo: 200mmx25mmx2mm Large: 150mmx20mmx2mm (this is doctor tongue depressor size) Medium: 115mmx9.5mmx2mm (this is regular craft…
Make your own popsicles with this mold! Great for soda and more! Print with a strong filament (PLA works but might break after a few uses) Add supports! Photos soon
This is an alternative lid for my coin drop box. In order to stimulate fine motor skills for my 1-year old, I designed this lid that lets her insert popsicle sticks in narrow slits. The slits are cross-shaped so it's a little easier as it…
I don’t know if anyone else would find these helpful, but I 3D printed a design that allows yogurt or popsicle tubes to be squeezed and then holds the spot where they are. With a toddler, I’m constantly squeezing tubes and trying to teach…
after my popsicle stick desk organizer I was stuck with the rest of the sticks, I thought this might be a neat quick print and gave me more practice designing things. just a hour to print and put the sticks in at the angle you want and…
This is my first attempt at remixing, I hope you like it. You will need to print the popsicle stick from original model. I printed this on the Bambu labs X1 carbon. Filament used was Polymaker Polyterra Ica and Polyterra Sapphire Blue…
Requires 60 connectors and 120 popsicle sticks to make. https://en.wikipedia.org/wiki/Rhombicosidodecahedron Related: Another connector idea to make a really large torus with this same shape is:…
A connector to make rhombic shapes. Pictured is a 2x2 rhombic dodecahedron.
My friend wanted to laser engrave standard popsicle sticks with labels for a plant sale. So I designed this module for him that lets you easily drop in the sticks and then keeps them in precise alignment during etching. Additionally you…
Make a huge D20 using those faces, popsicle sticks and the hubs from Hub for Popsicle Stick Icosahedron I've tried many ways of modeling the faces, and ended up with this “springy” version to account for the small differences in popsicle…
100x160mm sign, reading “I am a meat Popsicle” with art of a frozen confection. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit.
Rhombic Triacontahedron, one of my favourites.
Requires 60 connectors and 150 popsicle sticks. Composed of a single connector with one axis of symmetry. Very interesting how the pentagons are offset from each other. https://en.wikipedia.org/wiki/Snub_dodecahedron
