Wyniki wyszukiwania: powerstrip

Sortowanie

149 modeli

P
Printablesbigalex

Double Clip Cable Tie - Powerstrip Holder for Multiboard ("Underware" Cable Management System by HandsOnKatie)

Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…

Wydruk około 0,97 €–1,18 € nettoWstępna wycena jednego wariantu

Pobrania
578
Polubienia
98
Ocena
5
P
PrintablesJB

Powerstrip holder mount

I liked the power strip support, but had not enough space on the sides. so i just rearanged the holders to be screwed in front and back. i printed it with minmal support, just to make sure it comes out great. you can also print it without…

Wydruk około 1,66 €–2,03 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
399
Polubienia
51
Ocena
4,75
P
PrintablesLayerCraft

Tesa PowerStrip hooks | Haken

PowerStrip wie Tesa PowerStrip in super klein und mittelgroß Update 21.05.2023: PowerStrip_spezial hinzugefügt Update 29.05.2023: PowerStrip_universal hinzugefügt…

Wydruk około 0,11 €–0,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
394
Polubienia
27
Ocena
5
P
PrintablesMartin

Powerstrip holder mount

I adjusted the wall thickness from JBs model to 3 mm (that is strong enough), the height to 41 mm to fit my power strips and also optimized it for better 3D printing. If you want to remix the model, please take the original one from JB.

Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu

Pobrania
105
Polubienia
8
Ocena
5
P
PrintablesMike81622

Tesa Hook (Powerstripes)

My wife needed a hook, that was easily removeable again, for our Christmas decoration and since I couldn't find any useful design I just quickly made my own. Nothing special, quick and easy print, designed to be used with Tesa…

Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
57
Polubienia
5
Ocena
5
P
PrintablesAlas

ShowerBasketTesaPowerstripHolder

Tesa Powerstrip holder for shower basket

Wydruk około 0,27 €–0,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
11
Polubienia
0
Ocena
0
P
PrintablesVegar

Powerstrip bracket

A small and minimalistic bracket for mounting one of my powerstrips. Same bracket will work for both sides. Update: 22.04.2023 - Added drawing with some dimentions. The powerstrip I'm using is a little bit ‘fat around the belly’ 🤭The…

Pobrania
1906
Polubienia
1031
Ocena
4,88
P
PrintablesBobMcGlobus

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Pobrania
1699
Polubienia
329
Ocena
4,33
P
PrintablesSergej

Powerstrip side mount skadis

Attach your powerstrip to the side to save space. With the click system it is attached in seconds.Two variants are provided, left and right. use more top_X.stl for longer powerstrips.

Pobrania
886
Polubienia
399
Ocena
4,78
P
PrintablesYann Büchau

HSW Wall Mount Tesa Powerstrips/double-sided tape

Better version shipped with HSW Screwiverse: https://www.printables.com/model/488798-hsw-screwiverse-flat-wall-tapeglue-brackets Attach this bracket to a wall using TESA Powerstrips or a similar product. Hotglue might work as well,…

Pobrania
857
Polubienia
180
Ocena
5
P
PrintablesFabian Haensch

Powerstrip holder clip - Mehrfachsteckdose

Simple clip-on powerstrip holder. Fast and easy to print, use a single 3 or 4mm screw for mounting. Fits most of the "EU Schuko Mehrfachsteckdosen", even the new design from Hornbach. Files: standard-Version = tight fit; powerclip_l =…

Pobrania
599
Polubienia
53
Ocena
5
P
PrintablesHeavyMetalGuy

Brennenstuhl powerstrip mount (wall/underdesk)

Mount for Brennenstuhl powerstrips

Pobrania
465
Polubienia
68
Ocena
5
P
Printablespasq

Brennstuhl ecoline powerstrip Wallmount

Be aware that some models differs from the one I bought, especially the size of the cable attachement. Check that before printing pls.

Pobrania
463
Polubienia
67
Ocena
4,82
P
PrintablesMikNor

Honeycomb storage wall connector for tesa powerstrip

i have modified the insert-hollow-dual model so that i can attach the wall with tesa powerstrips. the holes have a back of 1mm and the tube is 0.75 mm longer so that the inserts rest directly on the wall

Pobrania
458
Polubienia
52
Ocena
4,67
P
Printablescapze

Skadis Tesa Powerstrips Tape Wall Mount (no screws, parametric)

Attach your Ikea Skadis to walls or furniture without having to drill holes. You can use Tesa Powerstrips tape or any kind of alternative adhesive tape for the same purpose. Warning! Please use the appropriate tape and for the appropriate…

Pobrania
436
Polubienia
56
Ocena
4,5
P
PrintablesMark

Wall hook / Wall hanger (Powerstrips)

Print the model on the side with supports for optimal result and strength.

Pobrania
331
Polubienia
23
Ocena
5
P
PrintablesRichiH

Cable management clip for Ikea Besta, Billy, and other 18mm (or wider) furniture with Tesa Powerstrip / 3M Command strips

A simple to print yet very sturdy and reliable cable clip for cable management. Designed for Ikea Besta, Billy, and other 18mm wide, or wider, furniture, boards, etc. You can still add and remove everything without catching on the cable…

Pobrania
305
Polubienia
61
Ocena
0
P
PrintablesP S

PowerStrip Holder IKEA KOPPLA for SKADIS

Dimensions had to be adjusted from the original model to fit the Koppla size. Printed at 50% infill in PLA.

Pobrania
302
Polubienia
37
Ocena
5
P
Printablesdodasch

Hook for Tesa Powerstrips

Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year!

Pobrania
278
Polubienia
53
Ocena
5
P
Printables3D_0wl

powerstrip bracket

Simple and easy to print mounting bracket for a powerstrip. Prints without support. Just print it in upside down orientation. Dimentions of the powerstrip used: height: 40.5mm width: 53mm cable: 31mm centered skrew used: 4,0x20mm Added a…

Pobrania
240
Polubienia
81
Ocena
5
P
Printables3DM-DeMeern

Small hook for Tesa powerstrips

Long time ago I have modelled this small hook for hanging small things at places where I can use the Tesa power strips. I used them frequently in my home. print this in any favourable colour or material like PLA or PETG

Pobrania
207
Polubienia
9
Ocena
4,83
P
Printablesmaxwxyz

Door Stop Catch / Window Holder for Tesa Powerstrips

Door catch & stopper / window holder with firm fit and good grip to hold the door or window open. It is easy to attach because both sides match the size of a Tesa Powerstrip: one for the window frame and one for the wall or skirting…

Pobrania
203
Polubienia
61
Ocena
5
P
PrintablesJL_Design

Powerstrip holder for Ikea Skadis 53x40mm

I adapted the model to fit a 53x40mm Powerstrip

Pobrania
200
Polubienia
35
Ocena
5
P
PrintablesMazzPrint

Powerstrip bracket

For power strips of 49x40 mm. Printable without supports. Same for both sides

Pobrania
194
Polubienia
30
Ocena
0
P
Printablestmon930

Pegboard Compatible Powerstrip Holder

I made this for a specific power strip from Harbor Freight (national chain of hardware stores selling cheap (read crappy) hardwares). It works for other small power strips I have. I made it to bolt my power strip to pegboard but you can…

Pobrania
191
Polubienia
45
Ocena
0
P
Printablesaszajlai

PowerStrip-Screw-Clamp for OpenGrid

Needed something to hold two power supplies so used the one closest to the dimensions I needed. I moved the screw tap to be centered, removed one of the multiconnect slots and lowered from 100 mm to 55 mm. I had a comment that the screw…

Pobrania
175
Polubienia
24
Ocena
0
P
Printablesdamoli

Basecap Snapback Holder with Powerstrips

Since my baseball cap collection was getting bigger and unattractively stacked on the shelf, I was looking for a holder for the caps. Since I didn't like the holders I could find - only a hook on which the cap then starts sagging or the…

Pobrania
175
Polubienia
16
Ocena
5
P
PrintablesMark

Picture hanger (low profile, powerstrips, 3 variants)

Update: Added even lower profile version Update 2: Added a version for 2 Power Strips with a stronger hook

Pobrania
156
Polubienia
13
Ocena
5
P
PrintablesBob837

IKEA Koppla powerstrip EU 8 Plug mount (small & fast to print)

It's a smaller and faster print than the original. I just performed a cut through one of the mounts

Pobrania
149
Polubienia
17
Ocena
5
P
Printables😀 Willy

Mehrfachsteckdosenleiste Halterung PowerStrip Holder

An easy to print holder for most of the cheap 220V power strip . as they comes without fixing holes... Here my solution , and need only some 12 gramms of Material ! and 4 screws diam 3mm No support Infill: minimal 15% better 20% or 25%…

Pobrania
145
Polubienia
16
Ocena
0
P
PrintablesMartins3DStuff

Simple & Strong Hook (For Tesa Powerstrips)

Sand the face on which the tesa powerstrip goes for better adhesion

Pobrania
127
Polubienia
11
Ocena
5
P

Powerstrip mounting brackets | GER - type

Other power strip brackets were not sturdy enough or did not fit my used powerstrip, so I made one myself. Its useable with the typical power strips available in Germany.

Pobrania
123
Polubienia
14
Ocena
0
P
Printablesdodasch

Hook for Tesa Powerstrips

Use these Powerstrips: TESA 58000 tesa® Powerstrips® Large, 5,0 x 2,0 cm I use this hook in my bathroom for a towel, but you can use it for every purpose. Tested glued to tiles in my bathroom. Has lasted bath towels for a year

Pobrania
120
Polubienia
21
Ocena
0
P
PrintablesMr_Muffin

XT60 powerstrip

Use Case: I designed this powerstrip to distribute power from a lipo battery to four automotive lights via xt60 connectors. It is handy anywhere you need more than one xt60 power source. Design: The case is designed for the xt60 connector…

Pobrania
111
Polubienia
22
Ocena
4

EU powerstrip wall mount bracket

Wall mount bracket for EU powerstrip. Designed for powerstrips with dimensions shown in the attached image.

Pobrania
109
Polubienia
17
Ocena
5
P
PrintablesInSL

small tesa powerstrips hook

Use tesa powerstrips small to stick it to he wall: https://www.tesa.com/en/consumer/tesa-powerstrips-small.html I printed it in PETG with supports and 0.2 mm layer height.

Pobrania
105
Polubienia
8
Ocena
0
P
Printablesphilsynek

Snapback cap hook for tesa Powerstrips Small

Nozzle: 0,4 Layer: 0,2 Infill: 15 to 25% should be sufficient No supports needed, if you print it on the side.

Pobrania
104
Polubienia
8
Ocena
0
P
PrintablesThunderbird332

Tesa Powerstrips Large / Small mount for Honeycomb Storage Wall

Fit snuggly into the standard mounting hardware. Tipp for Printing: - Print the vertical ones on their side, such that the cut hexagon lays flat on the printing bet - Print the horizontal one on its flat face - I used three layers on top,…

Pobrania
103
Polubienia
26
Ocena
5
P
PrintablesAbdagon

Brennstuhl ecoline powerstrip Wallmount (remix with bigger holes)

I've made the hole for the cable bigger and added one on the other side for the "Comfort Switch Plus" model

Pobrania
100
Polubienia
13
Ocena
5

Honeycomb Storage Wall - Tape Mount Remix for tesa Powerstrips LARGE

I wanted a no-drill mounting solution for the Honeycomb Storage Wall. I found a good design and remixed it for my purposes. It is now sized perfectly for the tesa Powerstrips LARGE. Additionally, I made several other changes: the base is…

Pobrania
99
Polubienia
21
Ocena
0
P
PrintablesGeaz

Small Shelf for small prints - Tesa Powerstrips

This is a small shelf for you prints. It is desinged to be mounted by two Tesa Powerstrips ( https://www.tesa.com/en/consumer/tesa-powerstrips-large.html ). For one complete shelf, print 1x the shelf file and 2x the mount file. Category:…

Pobrania
98
Polubienia
28
Ocena
5
P
PrintablesMeltForge

towel clamp for tesa powerstrip hook

A clamp for a towel so that it is possible so securly mount a towel on a wall even when the loop on a towel is missing, using the tesa Powestrip connector. How to Print Print the clamp using 3 Walls and 15% infill and 0,2mm layerheight…

Pobrania
98
Polubienia
29
Ocena
0
P
PrintablesR.deBrouwer

Brennenstuhl Premium-Line powerstrip mounting bracket

3D Printed Mount for Brennenstuhl Power Strips : This mount is designed to securely attach Brennenstuhl power strips to flat surfaces, such as walls or desks. It's a practical solution to keep power strips organized and out of the way,…

Pobrania
92
Polubienia
8
Ocena
5

Europe Powerstrip brackets

Two brackets to mount a EU powerstrip (KF-FB-03K) to the underside of a table/desk with the help of a couple of screws. Since I had a hard time figuring out how big other brackets online are, here's some dimensions of my powerstrip for…

Pobrania
90
Polubienia
8
Ocena
5
P
PrintablesPurrfect3D

Mini shelf (bathroom, kitchen) for adhesive tape (e.g. Tesa Powerstrips)

Just a small shelf for your bathroom or kitchen to store some things right next to you. Can be mounted with double sided adhesives, e.g. Tesa powerstrips. The spot for the adhesives is 15x35mm and fits two Tesa powerstrips in size small.…

Pobrania
90
Polubienia
15
Ocena
5
P
Printablessxlx0

powerstrip holder for ikea skadis 43x50mm

adapted the size to fit a 43x50mm powerstrip

Pobrania
78
Polubienia
10
Ocena
0
P
PrintablesNext 0815

Hook for Tesa Powerstrips

This Hook is for the compatible “tesa Powerstrips Large (2kg)”

Pobrania
75
Polubienia
12
Ocena
5
P
PrintablesMustArt

Adjustable powerstrip holder

Eletrical powerstrip adjustable holder. Can be used under desk, or as wall mount. Either use double sided tape or screws. Minimum width is 52mm. Maximum is 95mm. 5 Main versions: 42mm height 42mm height with extra space 47mm height 47mm…

Pobrania
71
Polubienia
28
Ocena
0
P
PrintablesDabo

LIDL Smarthome Powerstrip Holder for IKEA Skadis

First Model i made for my Skadis. Simply 2 "Rings" which can hold the Powerstrip. Printed with Sunlu PLA+ at 15% Infill.

Pobrania
71
Polubienia
11
Ocena
5
P
PrintablesNext 0815

Wall mounted storage box for Tesa Powerstrips

The Storage Box needs 2 Wallmounts. Hits Storage Box is designed for 2 "Tesa Powerstrips" large (2kg)

Pobrania
70
Polubienia
20
Ocena
0
P
PrintablesDzefr1

Cheap Powerstrip Mount/Holder

Generic powerstrip mount, designed to be mounted "flat" in order to not increase overall height as much as possible.

Pobrania
66
Polubienia
8
Ocena
0
P
Printablesabruski

Powerfix powerstrip brackets

Hole Ø 4.5mm countersunk

Pobrania
66
Polubienia
3
Ocena
0
P
PrintablesT Hohn

Powerstrip Brackets

Power strip Bracket: Quick design I made to hold a power strip to the bottom of my standing desk: bracket interior is 54mm length, 35mm height, and bracket width is 35mm. It has holes on the side, but would recommend just drilling holes…

Pobrania
65
Polubienia
10
Ocena
0
P
Printableslagframe

Remote control holder for Neuhaus Lightning Group - Tesa Powerstrip Remix

This is a remix of @innercube_684054 Design. In contrast to the original, this version is attached using 2 Tesa Powerstrips. I find this particularly practical as I wanted to place the remote control directly above the light switch - so I…

Pobrania
64
Polubienia
6
Ocena
0
P
PrintablesT3chpics

Hook for double sided tape /powerstrips / command strips

A nice model to hang picture frames, art or paintings to the wall using double sided tape, powerstrips or command strips. No need for drilling holes, Just stick it to the wall without leaving a trace in the end!

Pobrania
59
Polubienia
1
Ocena
0
P
Printableskojak

Brenenstuhl powerstrip mount

Fits Eco-Line model. Printed in PLA with 3 perimeters.

Pobrania
57
Polubienia
8
Ocena
0
P
PrintablesThe Lurchman

UK Powerstrip Holder V2

A refined version of my original design

Pobrania
56
Polubienia
5
Ocena
0
P
Printablesjuergenbr

Powerstrip side mount skadis (wide)

Wide version of the Powerstrip side mount for IKEA Skadis. Compatible with the original locks.

Pobrania
56
Polubienia
7
Ocena
5
P
PrintablesAndrew

Hook for Tesa Powerstrips V2

Description here is my updated versions of my “Hook”: HookV2 :-) It works together with Tesa® Powerstrips® Large, 5.0 x 2.0 cm. I added two holes as a backup ;-) Print Settings Printer brand: Prusa Printer: I3 MK3S Rafts: No Supports: No…

Pobrania
52
Polubienia
4
Ocena
0
P
PrintablesCronosti

Funko Pop Regal für "tesa Powerstrips"

Ein Regal für verpackte Funko Pop-Figuren. Die Rückseite wurde bearbeitet, um so "tesa Powerstrips" anzubringen.

Pobrania
51
Polubienia
17
Ocena
0
P
PrintablesMeltForge

Soap dish using tesa powerstrip

A partially removable soap dish that you can fix to the wall using an tesa powerstrip and the fitting mounting bracket. I recommend ironing all top surfaces for a better finish. Before mounting check if both parts fit together and are not…

Pobrania
51
Polubienia
6
Ocena
5
P
PrintablesMK

Multiconnect Powerstrip keyhole

Mount a powerstrip with the keyholes to multiconnect. Multiconnect cutout is open so that it can be flexible to mounting locations of the multiconnector. I put the printed part on to the powerstrip first then slide it onto the…

Pobrania
50
Polubienia
10
Ocena
0
P
PrintablesRoboMagus

Powerstrip holder

EU Powerstrip holder for shelving unit (Stellingkast for my fellow Dutchies). The hooks are printed separately to ensure both proper strength for the small hook tabs, and the best possible alignment by glueing them in place for your…

Pobrania
50
Polubienia
8
Ocena
0
P
PrintablesMechfire

TrippLite ISOBAR4 Powerstrip Mount

This is a mounting bracket for a TrippLite ISOBAR4. This is designed to be mounted either horizontal or vertical - either way should be fine. https://www.amazon.com/Tripp-Lite-Protector-Right-Angle-ISOBAR4ULTRA/dp/B0000513O4 I quickly…

Pobrania
50
Polubienia
4
Ocena
0
P
Printableshowil

Base plate/platelet for Tesa powerstrip hooks

Printed on a Prusa-Mini+ in (Prusament-) PETG with 30% infill, with 4 perimeters and 0,1mm layer height. Brim was used but is maybe optional. With the above settings printing takes 11 min on a Prusa Mini+.

Pobrania
48
Polubienia
2
Ocena
0
P
PrintablesYorrit Belmans

Lidl Silvercrest Powerstrip Wall Mount

Lidl Silvercrest Smart Powerstrip Wall Mount.

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesKeks95

Toilet roll holder powered by TESA Powerstrip

Print without Supports with Profile 0,2 Speed. Printed on Silver PLA on i3 MK3S.

Pobrania
48
Polubienia
1
Ocena
5
P
PrintablesBuschi

Cable Clip for Tesa PowerStrips Small

This is a cable clip inspired by https://www.prusaprinters.org/prints/109563-cable-clip-2022 but for TesaPowerStrips Small. I also changed the widths of the entire clip throughout to 2mm to optimize the print process and have consecutive…

Pobrania
46
Polubienia
3
Ocena
0
P
Printablesschinkenfisch

Rossmann powerstrip mount

Rossmann (German "drugstore") sells powerstrips with integrated USB power supply (max. 2100 mA) which are super convenient for raspberry (<= v3) projects. I designed a mount to attach it to my lack printer enclosures with M4 screws. The…

Pobrania
45
Polubienia
7
Ocena
0
P
PrintablesNuIIPointer

reinforced wall hook | tesa powerstrip

a reinforced wall hook for heavy picture frames. It uses 2 tesa powerstrips.

Pobrania
43
Polubienia
6
Ocena
0
P
PrintablesMcFly

Powerstrip hook

I printed it on its side for more structural strength, event though it takes longer to print. If you want to hang a light item, printing the hook on its back should probably suffice.

Pobrania
43
Polubienia
4
Ocena
0
P
Printablesrichmitch

Powerstrip tidy

I thought that my power board looked untidy, so I designed this box for it to sit in. The clip shows yellow pyramids which represent plugs in a 4 way powerboard underneath shown for illustration only. Note that this design requires the…

Pobrania
39
Polubienia
12
Ocena
0
P
PrintablesNuIIPointer

PictureHook Powerstrip Reinforced

Hook Like Tesa Powerstrips. Reinforced to avoid bending Print Settings Printer Brand: Creality Printer: LD-002R Rafts: No Supports: No Resolution: 25 Infill: 100 Filament: eSUN Resin grey Category: Replacement Parts

Pobrania
39
Polubienia
3
Ocena
0
P
Printableskorken-r

Parametric Powerstrip Mount

YAPSM - There are a lot of powerstrip mounts arround, but there are even more different sized powerstips available. This is a parametric FreeCAD design which can be adjusted to any size. Or feel free to modify the model to your needs.…

Pobrania
39
Polubienia
8
Ocena
0
P
PrintablesBB-Parts

Tesa powerstrips hook

Print it with 100% concentric infill.

Pobrania
37
Polubienia
3
Ocena
0
P
PrintablesMustArt

Powerstrip holder wall mount, under desk

Eletrical powerstrip holder. Can be used under desk, or as wall mount. Either use double sided tape or screws. 3 Main versions: Horizontal wall / cabinet mount: If you'd like to attach it to a wall or cabinet but keep the outlets on top /…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesC_hess

Desk clamp for Brennenstuhl Alu-Office-Line powerstrip

Fix your Brennenstuhl powerstrip to your desk! Fits desktops from 25 to 32mm. Printed in ASA, PETG should also work fine. 0.4mm nozzle, 0.2mm layer height. No supports needed, you should use 5 perimeters. You should turn…

Pobrania
37
Polubienia
4
Ocena
0
P
PrintablesTinker.Fun

Cap Holder with tesa Powerstrips

Do you like my work? You are welcome to support me here, thank you very much! https://www.paypal.com/paypalme/tinkerfun I have constructed a simple but very practical cap holder. One holder is for one cap. A tesa® Powerstrips Small fits…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesTimoK

Powerstrip light cover

A cover for the illuminaterd power switch on my extension cord. It fits Switches with a size up to 23 x 19 mm and is 8.5mm high on the inside. The walls are 4mm thick. I printed it with 3 perimiters and 5 top/bottom layers. You shouldn't…

Pobrania
34
Polubienia
1
Ocena
0
P
Printablesmartona

19" Rackmount PDU/Powerstrip Mount for Honeycomb Storage Wall

Print two of the mounting pieces and four of the inserts in the attached orientation.

Pobrania
34
Polubienia
9
Ocena
0
P
PrintablesEmil Büge

IKEA KOPPLA Powerstrip Holder / Bracket

A wall, or under desk mounting option for your IKEA KOPPLA powerstrip.

Pobrania
33
Polubienia
4
Ocena
5
P
Printablesmassis

Hama Powerstrip L-bracket desk mount

I recently bought a new 6-plug powerstrip by Hama (model number 00137239) for my desk. While a fantastic powerstrip (gotta love 90° sockets instead of 45!), having it on my desk was pretty messy. Mounting it flat against the underside of…

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesTony

One Beat Powerstrip mount for Honeycomb Storage Wall

I wanted to mount my OneBeat Powerstrip to my honeycomb storage wall. I designed this in TinkerCAD and it mounds pretty well after 4 iterations of design. Give it a try. This requires tree supports for the side clips and requires the M3…

Pobrania
33
Polubienia
4
Ocena
0
P
Printablesradicalreel

Skadis tesa powerstrip mount

Skadis tesa powerstrip mount for M3 nut. This is meant to hold the board itself with the necessary distance.

Pobrania
31
Polubienia
7
Ocena
0
P
PrintablesF Z

Slim coat hook for use with Tesa Powerstrips

Looking for some small or slim hooks I came to the conclusion, that all those hooks offered by Tesa itself were not as slim nor as elegant as I'd expect. So a made my own. It's less then 15 mm thick and can still carry most clothes as…

Pobrania
30
Polubienia
6
Ocena
0
P
PrintablesFlyingT

Customizable 10 Inch Rack Powerstrip Mount

There aren't many options for 10-inch rack-mountable power strips, and the ones that do exist are often heavily overpriced. To solve this for my own homelab, I created this fully customizable generator so you can easily mount almost any…

Pobrania
28
Polubienia
12
Ocena
0
P
PrintablesPetri

Vertical holder for Ikea Koppla powerstrip + USB extension cord

0.2 mm layer height, printed on PETG with supports

Pobrania
26
Polubienia
3
Ocena
0
P
Printablesbene_K

Powerstrip Cover

Introducing the powerstrip cover designed to seamlessly complement standard triple socket strips available in diy stores, typically offered in classic white and black. Elevate your space with the cover, unlocking benefits to meet your…

Pobrania
26
Polubienia
10
Ocena
0

ORICO Powerstrip hollder for Ikea Skadis

A remix model ORICO Powerstrip hollder for Ikea Skadis

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesDJGummikuh

Wall-Mountable Soap Dish (for Tesa PowerStrip S)

We have a very small Guest bathroom with no proper place to put the soap. So I designed this soap dish. It mounts to any flat wall using two Tesa PowerStrip Small Double-sided adhesion strips. Since the strips are slightly longer than the…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesMirx

Hook for Wenko racks using Tesa Powerstrips

The adhesive pads that came with our Wenko rack did not reliably stick to the surface it was glued on, so I made this hook to use it with Tesa Powerstrips. This worked better on the particular surface but also not reliable. Maybe this…

Pobrania
24
Polubienia
0
Ocena
4
P
Printableseagleeye

Powerstrip mount for IKEA leg

Mounting for powerstrip to round table legs like of IKEA It's designed for 44mm diameter legs. Need: M4 screw and nut

Pobrania
23
Polubienia
3
Ocena
0
P
Printablesadamek

Threaded Skadis wall mount for Tesa powerstrips

To simplify the installation, I designed this part to attach directly to the IKEA Skådis board using integrated threads and caps — no additional screws or hardware required. Just apply a Tesa Powerstrip to the printed part and mount it in…

Pobrania
22
Polubienia
5
Ocena
5
P
PrintablesDAKUE1999

Tool holder wall mounting (Tesa Powerstrips)

Tool holder for post processing of 3D prints. Attached with a Tesa Powerstrip. printed on the head, 60% cubic Infill, no support The caliper has been given more space and is no longer as close to the other tools as shown in the picture…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesLeigh Williams

Powerstrip Holder

Update 6 April 2025: Added a cross bar on the left side bracket for extra support. I noticed over time (many months) the powerstrip, when heavily loaded with wall warts, will bend the brackets outwards. The cross bar seems to remedy that.…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesMichael

Powerstrip Glue Nail

This Glueable Nail is inspired by the “tesa Klebenagel”. You may glue it with any adhesive of your choice. The uploaded STL is designed to go with the “tesa Powerstrips SMALL”. The V2 files are slightly reduced in size to cover only the…

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesvalodec

Ikea TIMMERFLOTTE Holder for use with Tesa Powerstrips

Ich habe diesen Remix erstellt, um die Aussparung für das Klebeband zu entfernen. In der ursprünglichen Version war diese zu tief für einen druckaktivierten Tesa Powerstrip, sodass das Band keinen optimalen Kontakt zur Wand hatte. Ohne…

Pobrania
21
Polubienia
1
Ocena
0
P
Printables3d_print_it

Logitech C270 Kamerahalterung für Tesa Powerstrips / Logitech C270 Camera Mount for Tesa Powerstrips

Sehr einfache Halterung für die Logitech C270 Webcam passend für Tesa Powerstrips Large 2cm x 5cm. M3 Schraube & Einschmelzgewinde.…

Pobrania
21
Polubienia
1
Ocena
0
P
PrintablesDarkesthour

Simple Workshop Powerstrip Outlet Cover

An outlet cover for 27mm x 27mm x 4mm outlets. In particular I created this for the this item on amazon https://smile.amazon.com/KMC-Workshop-Extension-Industrial-Certified/dp/B07P5C62RG?sa-no-redirect=1 When I printed them they snap on…

Pobrania
21
Polubienia
0
Ocena
0
P
PrintablesWolf

Powerstrip mounting solution - Power strip holder - Steckdosenleiste Halterung

Power Strip Holder (Extension Cord) - Universal for Any Surface Our universal holder for power strips is designed to provide you with a practical and effective solution for placing your electrical strip on any surface. With this holder,…

Pobrania
20
Polubienia
2
Ocena
0