1103 modeli
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. I published an improved model of these tweezers (Precision Tweezers V3) :…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
It seems most printer knobs are either good at precision/comfort, or they are good at speedy rotation, not both. This knob upgrade truly has the “Best of Both Worlds”, precision using an aesthetically pleasing, traditional “knurled knob”…
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
A printable copy of the tweezers used by clockmakers or electronicians. Clip each “blade” in the support and it's ready. Print Settings : Printed on MK3S Filament tested : PLA Nozzle 0.4mm : 0.15mm tested
Wydruk około 0,80 €–0,97 € nettoWstępna wycena jednego wariantu
📝 Description The Ruler Stop S is a compact and precise stop designed for 0.5 × 15 mm rulers , ideal for workshop use, model making, and DIY applications. To make it максимально flexible, the model is available in four versions (M3, M4,…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Wydruk około 3,09 €–3,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support block for the Work Sharp Precision Adjust Knife Sharpener. I noticed that the V-Block Clamp would “sag” when sharpening a knife, thus producing an inconsistent sharpening angle. I designed this support block to eliminate that “sag”.
Wydruk około 1,54 €–1,88 € nettoWstępna wycena jednego wariantu
no special print features I just printed it on 0.3 and draft. ONLEY WORKS ON ELMERS 7g GLUE STICKS, look at 2nd image for more info.
Wydruk około 0,19 €–0,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
24 August 24 - Working on a new version! If you're planning on printing these and this message is still here, please message me so I can make the newest model available to you. Will get them up here as quickly as I can. New Model Added! 1…
Wydruk około 3,57 €–4,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello, This is a compliant mechanism that can be used for percise positioning in two directions. The dimensions of the Compliant XY-Positioning Device are approx. 69 x 61 x 8 mm The range of motion in X is approx. 1 mm; the range of…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu
Introducing the SuperPINDA Precision Adjuster! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe. This first version is specific to the Prusa i3 MK3S+, however the Drill Bit…
Wydruk około 0,35 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My second attempt at this model, based on input from other hobbyists. The added protractor is by Joaelso. https://www.printables.com/model/171880-winkelmesser-protractor The M4 knob is by StriK3FoRC3 from…
Wydruk około 8,92 €–10,90 € nettoWstępna wycena jednego wariantu
Minimalistic design suitable for precision workshop projects.
Wydruk około 0,23 €–0,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The same great SuperPINDA Precision Adjuster for the MK3S+ , now available for your MINI/MINI+! The SuperPINDA Precision Adjuster (SPA) is an integrated mount and adjustment tool for the SuperPINDA probe on your MINI/MINI+. Overview: The…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is ECI mag block for a Ruger 10/22 or Ruger Precision Rifle. Keeps the bolt from closing.
Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET
for English Documentation see below Intro Diese gebremste Filament Zuführung passt unter anderem zu meinem Filamentspooler . und zum PRUSA LACK Enclosure. Sie ersetzt meine erste Version und ist geeignet für Spulen bis zu 200 cm…
Wydruk około 3,88 €–4,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you draw a circle on an x/y plot touching both axes, the distance from the origin to the centre of the circle is R+L, with L being the distance between the origin and the nearest point on the circle, and R is the radius. With a bit of…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Precision Centre Finder Centering Square 120mm Gaging Center 160 x 132 x 20mm
Wydruk około 3,26 €–3,99 € nettoWstępna wycena jednego wariantu
This Wilkinson razor blade holder is your new secret weapon for precise, gentle scraping. Perfect for removing stickers, adhesive residue, and other debris from flat surfaces. Simple yet effective, it’s ideal for detailed tasks that…
Wydruk około 0,43 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Someone I know managed to disintegrate their previous screwdriver set holder. I've been trying to get better at Fusion 360 so I took it upon myself to sort them out. Hole sizes are parameterized, let me know if I should upload the step…
Wydruk około 3,42 €–4,17 € nettoWstępna wycena jednego wariantu
Remix of the great idea from MaxStein. I made a version that fits my cheap PTFE tube cutter from China. The model is for 4mm PTFE tubes, so the opening is 4.3mm as in MaxStein's model. You can adjust the diameter of the opening with the…
Wydruk około 0,39 €–0,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
2 x 3 28mm (without magnets) Gridfinity bin that fits the JOREST 38pcs Precision Screwdriver set from Amazon.
Wydruk około 3,81 €–4,65 € nettoWstępna wycena jednego wariantu
3D design of a ruler for measuring the diameter of a circle and an angle gauge. Ideal for use in engineering and educational projects, this tool allows for precise and easy measurements, making it a great resource for students and…
Wydruk około 0,33 €–0,41 € nettoWstępna wycena jednego wariantu
This simple tool will let you easily remove the bottom seal on a Lefty Ocho. First mount the tool on the Ocho, then use a vice to hold it while you pull/push the echo until the seal gives. It does take a bit of force. Be careful to not…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A printable copy of the tweezers used by ham cutter. Fold it and it's ready.
Wydruk około 0,50 €–0,61 € nettoWstępna wycena jednego wariantu
I was looking for a holder for my precision square and found one, but not for the skadisshelf. I adapted the existing model and thank you to the creator Ben.
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
I printed the stand in PETG on my Prusa Mini+ with 50% infill, 0.2mm layer height, and no supports. For the bit holder I used 15% infill. Update: I made a V2 of the stand which will allow the driver to seat more fully and be removed…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The lid differs only in the inscription. The bottom is the same for both lid versions. Víko se liší pouze nápisem. Dno je pro obě verze víka stejné.
Wydruk około 3,15 €–3,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The reach of iFixit bit driver was not sufficient for my use. I created this extender to enable myself to reach to screws. I printed this with the 3 perimeters and 30% cubic infill. I printed it standing with the bit end down. I printed…
Wydruk około 0,23 €–0,29 € nettoWstępna wycena jednego wariantu
Another remix of the inset for the "Precision screwdriver case" by TimATX
Wydruk około 2,38 €–2,91 € nettoWstępna wycena jednego wariantu
Permet de découper les carrelets pour stylo en tranches très fines sans aucun risque avec une scie à onglet electrique. Ce dispositif repose sur une table en contreplaqué avec un deuxième morceau destiné à éloigner le carrelet pour une…
Wydruk około 4,01 €–4,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A printable copy of the tweezers used by clockmakers or electronicians. Fold it and it's ready. In this version I added an internal structure to greatly improve the accuracy and I created a full set of tweezers. There are 7 models :…
I like this caliper a lot so I added it from thingiverse. Here is a link to the original. https://www.thingiverse.com/thing:1661962 Original Description: Summary this is a wip. i will be tweaking and adding files and information as i go.…
I remixed the Precision Tweezers by M4NU to a cranked version. For that I chopped off the folding mechanism and added the 45deg angled legs. The folding mechanism is ideal for remodeling the legs and also in terms of “printability”…
Printing Parameters: Material: PLA or PETG (more durable) Resolution: 0.2 mm Perimeters: 3 Infill: 15 % Supports: no One color or add color changes at 12.6 mm and 57.4 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape…
I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…
Classic protractors use verniers (nonius scales) with 2, 5 or 10 minutes marks (0.033, 0.083 and 0.167 degrees correspondingly as one minute is 1/60 of a degree). Modern CAD software deal with decimal values of a degree so I made this…
High-Precision Bench Vise (Anti-Flex) This vise is designed to guarantee maximum stability and mechanical precision, completely eliminating the flexing, lateral play, and jamming issues typical of 3D-printed vises. 1. Mechanics and…
Tapping arms keep taps level and supported. I designed this model specifically for using small taps, as small as m1, that will almost certainly break if used by hand. Video: mag chuck video: My smallest test with this tool was a m1 tap,…
I HATE PROTRACTORS ALREADY! I printed so many prototypes and spent a lot of time and plastic to find the best tolerances. I'm really tired of them! Anyway, here is a professional version of The Smallest Protractor . It is bigger as you…
BOM: Printed with ROSA3D High Speed PLA Gray Stop wasting filament on bulky tools. This is a highly optimized, thin-wall funnel designed for speed, efficiency, and precision. Key Features: Ultralight Design: Engineered with a wall…
Info: I liked the original a lot (thanks @M4NU !) added grip lines at both ends of the tweezers, so it can hold things safely i have found it useful for my usage Asembly: just fold it, no glue needed (just like original) Print settings:…
Printing Parameters: Material: PLA or PETG Resolution: 0.2 mm Perimeters: 2 Infill: 15 % Supports: no One color or add color changes at 12.6 mm, 57.4 mm and 88.0 mm Tips and Tricks: Deburr the wheel Protect the wheel with some tape Use…
This Magwell Flare fits Aero Precision M4E1 AR15 Lower with slip-on fit and retention features wrapped around rear. Fit is tight; if printer oversizes part then filing angled contact surfaces should be workable. The rear retention…
The arm of the Work Sharp has a tendency to deflect or sag as you apply pressure when sharpening a knife. This simple but effective support block prevents that from happening.
UPDATE: May 4, 2026 — Version 2.0 is here! Based on user feedback and testing, I’ve completely overhauled the model. Here’s what’s new in V2 : Improved Blade Alignment: Redesigned the blade compartment for a tighter, more secure fit. No…
This is a custom precision bass guitar body. After printing a custom Stratocaster that I found, I decided I wanted to try making my own guitar and since there wasn't a bass available to download, I figured I'd give a try at making that.…
Funny sign-"I do precision guesswork based on unreliable data provided by those of questionable knowledge" Complete with recesses for 10mm x 1mm magnets to make the sign easily mountable on any flat ferrous surface. 2 versions (stl & 3mf)…
🧰 Overview SV08 Gantry v2 brings a cleaner, more precise CoreXY experience: Front-access belt tensioning for the AB motors (Voron-style) Aligned pulleys at the XY joints for parallel belt paths Easier setup & maintenance with more travel…
NOTE: Although this prints well on my old Anycubic i3 Mega, it does not print properly on my P1S. Because of the increased speed and accuracy of modern printers printing it on the side with the spinner does not offer enough stability. It…
Yes, this is yet another drawing machine based on the coreXY principle, which is well known from the AxiDraw maschine. But instead of driving the size upwards like other designs here on the web, I have decided to keep it very compact,…
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
Peigne de précision pour dégradés. Design ergonomique, impression sans support. Idéal pour barbiers. Robuste et pratique
fully working calipers with 0.02mm precision
This is designed for PRL type shooting or any type of target shooting where you need to make notes as you go. It's designed to hold a standard credit card sized plastic card which are about £10 for 100 on amazon 0.76mm thick (30mil)x- 86…
Designed this jig specifically for the Aero Precision .625 low profile adjustable gas block. May also work with other low profile gas blocks, but I do not have any others on hand to test. Print (1) “Gas Block Jig” and (2-4) "Gas Tube…
Since making my first toolholder collection I have extended my library a bit, so here is a Gridfinity tool holder collection with the additional trays. All trays have a height of 4 units and are not stackable . (You may put them on top,…
NEU: 10.06.2024: Die Dokumentation Issue 1 ist fertig. Auch als als zweisprachige formatierte offline PDF Dokumentation (WORD basiert) zum Downloaden This documentation is available for download here as bilingual formatted offline PDF…
THIS IS WORK IN PROGRESS...FYI I made a quick detachable monopod for the picatinny rail on the RPR Stock. I Frankenstein'ed everything from bits and pieces from various sources and some of my own add on's. In short it is designed to slide…
Fits all the bits from this electric precision screwdriver kit . In addition it has storage on the side to hold all the various tools I use for 3D printing. I included the step file and f3d file if anyone wishes to remix/modify. From the…
This 10 mm XYZ calibration cube is a fast and reliable dimensional test for any FDM 3D printer. Each side is exactly 10 × 10 × 10 mm , with clean and clearly marked X, Y, and Z faces, making it easy to diagnose which axis needs…
Holder 32 4mm hex precision microbits compatible with Zack Freedman's Gridfinity organization system. There are lots of other similar holders our there, but most of them either included a slot for a screwdriver I don't own, were too big,…
Etui pour proteger la culasse de ma Ruger Precision Rimfire 22LR pendant le transport Imprimé en PLA HD (Winkle 870)
While I really liked the original nozzle design by Modu but required inserting a magnet between the printed parts, which felt a bit inconvenient for me. So, I decided to remix it to simplify the assembly process by split the it to 3…
Dremel Pillar Drill (Drill Press) Precision pillar drill stand for a Dremel giving a plunge depth of about 70 mm. Any Dremel that has the ‘standard’ 16 mm screw at the business end should fit but I’ve only tested this with the Model 800.…
These are models that work as a replacement screw for the anova sous vide clamp that anova wants FOURTY UNITED STATES DOLLARS TO REPLACE. Luckily 3d printer owners can repair their own things right? There are 3 different models now, the…
Precision/small screwdriver case. Hinge pins use 1.75mm filament. Both inserts are friction fit but could be glued if desired.
Simply slice this STL with your preferred settings and run it. Installing is as simple as slipping your printed part under the clamp from either side. No Adjustments to knife sharpener necessary. Feel free to reach out with any problems…
Make drilling holes easier and faster with this 3D printable Adjustable Hole Marking Tool! This handy tool allows you to measure and transfer the exact distance between two mounting holes onto your workpiece. Simply adjust the sliding…
This is a quick grab version for the Xiaomi Precision (and similar) screwdrivers that use this style case. In my version I've removed the outer case and widened the opening so the screwdriver and bits can be quickly grabbed without…
🔧Compact rotating-base screwdriver for 4 mm bits. Print-in-place design, strong, fast, and ready for daily use. 🛠 Printing Instructions Print in PLA or PETG at 0.2 mm layer height, 3 perimeters, and 15 % triangle infill. Arachne wall…
Room for 6 tweezers, 2 precision knives, 3 spudgers, etc.
The outside swirl pattern will give the illusion of rotating 378° when the dial only move 1.8° (360°/200 steps). This is possible due to the interference of different number of windows and color notches in the base. The angle of the…
Complete set of metric fine pitch nuts inspired by ISO 261 and ISO 262. The improved thread design does not require consideration of printer tolerances any longer - at least as far as the nuts are big eough for the printer. Print with low…
MAGNETS - Uses five 6x2 magnets (measured size is 5.94x1.6) inserted in the bottom. Place adjacent magnets in same direction. While not required to keep the bits in, it stops them moving around. The groove under the bits is ultimately…
Civic Type R (FL5) Fender Vent Guards The FL5 iteration of the Civic Type R introduced open vents to the front fenders. However, these vents are large enough to allow road debris to pass through, potentially damaging the side panels.…
Heyho A friend of mine who likes to roast his coffee himself asked me to create a file to put his roasted beans into bags without creating a too big mess. There are already solutions like this out there but they didn´t fit his…
This 3D-printed Furniture Wedge Set includes five precise thicknesses (1 mm, 2 mm, 3 mm, 4 mm and 5 mm), designed for a wide range of household, workshop, and DIY uses. Each wedge provides an accurate, reusable solution for leveling…
If you are looking for the bracket that attaches the Anova to the water bath, see my companion design here: Sous Vide Water Bath Bracket - Fits Original Anova Precision Cooker by Stefan | Download free STL model | Printables.com The…
I was always driven crazy by how fast the precision razors dull out after a single use, so I designed a razor with replaceable blades to solve this problem. I mainly use these to line up my mustache and the cheek line of my beard, but…
Holder for precision screwdrivers. Has cut-outs for easy removal. Size is 2x3
Just grab and go with your fingertip, 6u high, fits in most toolbox drawers. Other similar models available aren't easy to grab, and can fit too snugly. Stackable. Fits the 3x common wiha precision (maybe also picofinish?) lengths. More…
Just a small support beam for the clamping arm to add some stability. You can insert it from the side and don't have to be so cautious about the sharpened blade when trying to insert one from the front.
A holder for screwdrivers in Gridfinity boxes. Flat for easy storage, holes on lower holder so the screwdrivers don't fall out if you tilt the box up. Easy removal - just tip on the bottom of the screwdriver; the hole is angled so the…
Please comment, rate, and post a make! I really liked the holder design modifications done by FTBT, but it didn't quite fit the branded Xiaomi precision screwdriver (affiliate link) set. This is a revision, modelled from scratch to fit…
Achieve dead-accurate, repeatable angles for fine furniture and cabinetmaking with this Precision Gear Train Miter Gauge , a fully modular accessory for your table saw. This model replaces standard friction-lock mechanisms with a…
This post/print only contains the bottom! If you want the rest please refer to TheSameNameTwice, the rest of the files for the box are there. I did not want to steal any downloads.…
This is a simple clip on cover for the web camera on a dell 55XX series laptop. It clips on nicely but then is able to slide off and on the lens to cover it. This was test fit on a Dell Precision 5570. I printed it using a 0.25mm nozzle,…
Size: The holes body: Length*Width=110*38 mm; Length*Width=70*20 mm; Easy install Click - NO Bolt, Nut, superglue!
Revision 2 Head on over to Revision 2 to make an updated feeder. I focused on making it easier to use and assemble. And I wrote a (mostly) new app. I think it is a much better design overall. Welcome Previous versions of this feeder have…
I have acquired many Wiha precision (261 series) screwdrivers over time, usually in 8 piece sets. Wiha provides a bench top stand with the 50+ piece sets and I wanted something similar rather than continuing to use the multiple green…
Gemini said Sure! Here is the English version of the description, using professional terminology to highlight the engineering value of your project. High-Performance 3D Printed Concrete Mold – Engineered for Precision Take your production…
A sleek, 3D-printable measuring spoon designed to accurately portion 7 grams of coffee grounds for espresso and filter brews. Ideal for baristas and home brewing fans who want consistency and style in their coffee routine. ✅ Why You’ll…
This is a simple riser to provide a more open area underneath for the ventilation/cooling intake fans as these laptops can run quite warm. It also serves to angle the laptop approx 5 degrees to provide more comfortable typing position.…
A very small combination of these two models. After hunting around I've settled on Gridfinity Refined as my default “Gridfinity Variant”. Combined these in Bambu Studio… Haven't quite figured out how to work with .stl files so did this…
This set includes dimensionally accurate CAD models of the OpenBuilds V-Slot aluminum extrusion profiles in 2020, 2040, and 4040 formats. Designed for engineering, prototyping, and 3D printing applications, these models are ideal for use…
Model of the Ruger BX-10 magazine for single shot loading. Made specifically for the Ruger Precision Rimfire 22lr. Might work or the 10/22 too as I modeled the dimensions of the BX-10 magazine pretty closely. This gives perfect single…
I needed a handle for my files, so I slightly redesigned the very handy cutting handle from @PointNemo . I printed it on Flashforge AD5X. Print Details: material - Elegoo Rapid PETG; layer height - 0,16 mm; walls - 5; infill - 15% gyroid;…
This remake may be a bit more versatile, comfortable and safe for hobbyists. - Print all parts in the orientation displayed here:…
The Design I recently picked up Work Sharp's Precision Adjust knife sharpener. It's an incredibly popular first step into proper guided sharpeners. One of the device's few flaws is that the angle adjustment knob tends to move a bit while…
This holds the Wiha 26197 screwdriver set in a 2x5 grid. The models are parametric, so you can easily adjust sizes to fit your needs. I used my remix of PDXCNC's bins, and made a significant rework to the Wiha Screwdriver tray by Physics…
![Precision Lefty Ocho bottom seal removal tool [ reusable • no support • 25% infill ]](https://media.printables.com/media/prints/5788a7b9-c7bc-438f-aa31-a7fea36a8fb8/images/10627906_064c7356-9808-4cf1-8b57-d94715741a7f_5aa531a1-5b25-4d3e-9803-6c4d33e9114e/img_9261.jpeg)
![Dope Data card holder for [ air ] rifle precision rifle shooting scope or RIS Picatinny mount](https://media.printables.com/media/prints/393250/images/3284899_a0527a9d-c0ac-4387-8d0b-873f44b445ea/img_4010.jpg)
