481 modeli
A projector for GoBo that can be mounted on any flash (preferably one with a Led pilot light, such as the Godox MS300V). This is a personal elaboration inspired by the work of Petri Damsten ( http://petridamsten.com/gobo-holder/ ) and…
Designed as a stand for the awesome XGIMI Elfin Portable Videoprojector whose size is 19.2 x 19.4 x 4.8 centimeters and weights less than 1kg, but the stand can surely bear heavier devices, just not sure how heavier. [edit] I added the…
A plant pot inspired by the intricate structure of a slide projector. Used Filament: This model was printed using PLA Mineral Natural from Fiberlogy. The PLA Mineral series is our all-time favourite! The amazing texture of the finished…
A Arduino/ESP8266/NodeMCU based RS232-MQTT-Bridge to control a beamer via the serviceport. You find the Firmware on my GitHub-Repo: BeamerControl Print instructions Parts 1x NodeMCU V2.x 1x MAX3232 RS232-to-TTL Adapter 4x 2.5mm Heat…
Projector HY300 Cover This 3D model is a protective cover for the HY300 projector. It is designed to cover and shield the projector lens from dust, scratches, and other damage when not in use. The model is lightweight, easy to attach and…
If you have a projector with those discs, then print the box to avoid any damage or loss of loved discs. Stl file is for projector Mideer. It's modified coin cell storage box. The main difference is the little axle on one side of the…
Univerzální protikus držáku projektoru Solight 1MP2. Print instructions Tisknuto na Prusamini PETG 0.2mmQuality, Infil 60%, 2h50min. cca 25g
Wall holder for Epson remote controller: 219863800. The remote control is used for several projectors, such as EH-TW7000, EH-TW7100, Home Cinema 3200, Home Cinema 3800 and more.
The included files are a mounting bracket for the Magcubic Projector HY300 PRO. All the models available did not work for me so i had to make my own. The features include Support free design Can print in 2 orientations (Flat and Standing)…
An universal mount for Samsung Freestyle projector. It will be used for wall mount but it should work also for ceiling mount. It is shaped to avoid limiting adjustment projector position. There are two 4 milimeter holes, to secure it on…
The Samsung Freestyle projector uses low-profile 1/4" tripod screws to attach the stand to the body, and I lost one of mine, so made this as a replacement. It is low profile, so you can still fit the projector in the case with its…
Version 1.2 Added 2 new parts that are specific to mounting in the top “Pie” location. TopHoloFrameServo and TopHoloLockRing. Intended Design/Use I designed these parts for mounting MG90S servos and Astropixels to MrBaddeley's MK4 R2-D2…
A Hologram projector prop as seen in the star wars films/tv shows. This design is based off of that seen in the pilot for Obi-Wan Kenobi on Disney+. Adjust scale in your slicer of choice to make sure main body and antennae are at the same…
Easy way to mount a Yoton projector from the ceiling pointing down so it can be use for cutting patterns. The 2 screw holes and knob give you some wiggle room to align the projector with your cutting table. I attached mine to the drywall…
Wall/Ceiling mount for the cheap HY300 projector.…
lluminate your Halloween nights This 3D-printed decoration casts eerie shadows on your walls, creating a captivating and spooky atmosphere perfect for Halloween celebrations. The tea-light projector features four classic Halloween scenes:…
Slide-in design with a bottom shaped to seat the projector and stoppers to prevent it from falling out. The shape of the holder allows for any tilt of the projector. It is mounted using two screws with a diameter of 4mm, either with wall…
I've designed a compact gobo projector that is compatible with Godox V1, AD100 PRO, AD200 PRO flash with the H200R round head. I needed something portable when I'm On-Location. No supports needed if printed like shown on the pictures. I…
A wall/ceiling mount for the Samsung Freestyle Gen 2 Projector. I modified 74ck's original design to make it square and added a clip that prevents it from sliding around. I also found that the original design started bending/warping over…
Projector cover protecting the lens from dust and damage for your MAGCUBIC HY300. Print Settings Rafts: Doesn't Matter Supports: No Resolution: doesn't matter Post-Printing How I Designed This Blender Category: Gadgets
This is a wall mount that can be coupled with my Yaber Projector Mount, or adapted to any other projector with a 25x25x10mm negative wall plate. Feel free to remix!
Simple 8mm film reel. I modeled it after the autoloading reel that came with my projector. I cannot guarantee compatibility with other models of projectors, but I attached an editable .step file so the model can be easily remixed. The…
A mount designed to securely hold a Philips PicoPix Max or other pico projector on the headboard of an IKEA MALM bed. Requires absolutely no tools or assembly and rigidly mounts on the headboard of the bed via gravity alone. The PicoPix…
Mounts m42 lenses or helicoids to Fujifilm mirrorless cameras. Note that this is primarily for adapting projector lenses with a focusing helicoid. So, the flange distance is a lot thinner than normal. A conventional m42 lens will not have…
Introducing my new 3D printed projector wall mount for your home cinema. Easy to install with holes for cable management, it's perfect for home use. Strong and capable of doing what it's meant for. Suggested slicing options: -Grid infil…
I've made a complete redesign of my earlier version of a projector wall mount because I realized that my first model had a conceptual flaw which affects the overall strenght and can deform over time. It has a 20° cut on the back so you…
All credits go to original creator! I used alu tape to get a little bit more light out of the device as advised by original creator. Printed in PETG (gray) except the GoBo holder (PLA, black). Supports only used where the nuts go to…
Ceiling projector/beamer mount (compatible with Viewsonic PX701HD) Parts: Bolts: 4x M4, 1x M8, 1x M10 Spring washers: 1x M4, 1x M8, 1x M10 Nuts: 1x M4, 1x M8, 1x M10 nuts Rubber/TPU flat washers: 2 - 4x M8 1x M10 Optionally a few flat…
Background: This projector has gone by many names over its long career. These include: “EL4000/01” “DP70” “Todd-AO Projector” “Universal 70/35” “Norelco AAII” They all refer to the same, legendary machines. With roughly 1500 produced from…
Use Astropixel or generic LED light boards with full assembly instructions.
Update 11.012.25: added the Fusion360 files for easier modification. I remixed the "Cog Laptop Stand - Adjustable angle" from @cq_15273 to fit my portable projector (Wemax Dice). I wanted to be able to point the projector at an angel to…
I've printed it in PLA, 10% infill, no supports, adaptive layers and brim. Took 10:40 for tube and 4:50 for the cap on Ender S1 (probably requires some more tuning in design…) In first run I wanted cap to also have cutouts but due to…
This is a custom mount designed for the HY300 projector. It can be easily attached to a bed frame, furniture board, or any flat surface with a thickness of around 18 mm. The mount fits press-fit style, but there are also pre-drilled holes…
A simple stand, with independent adjustable legs. The top and bottom grids are strong and stable for light weighted items. Each leg is independently adjustable so you can raise or lower each corner, without significant issues. Legs use a…
A fairly accurate model of R2-D2 holo projector with a separate lens and the eye socket. This is a full model for building into a dome, but if you need one just for surface mounting (dummy projector), you can use the included…
A wall-mount holder that fits your Epson projector remote control snug and secure, yet slides right in and out. Mounts using screws. Prints great with PETG on Prusa i3 MK3, but it'll surely work well with other materials. Feel free to…
It’s a screw-on mount for the HY320 projector model (NOT the Mini). I believe it doesn’t work with the mini version due to the size difference. There’s no trick to printing it: a support is required, there are no fragile parts, and it’s…
This is a storage shelf to hold Little Tikes Story Dream projector books. It is an updated version of my original bookshelf based on community feedback. I also needed space to hold more books. This version holds six full sets of books,…
The bracket is barely noticeable and allows the projector to be mounted simply by sliding it into place. It is ideal for flexible use in different rooms, such as the home theater or bedroom.
Description I bought the videoprojector for the lazy weekend night movie but I did not think about the stand until I got the projector. A friend of mine has a 3D printer and suggested me to create a stand and he will print it for me. I…
This pinhole projector will allow you to view the eclipse during the partial phase. As the light passes through the hole
A common issue with the projectors in OEM Valeo Bixenon housings fitted to B6 A4's is that the reflector bowl can become scorched which results in diminished light output. Instead of replacing the whole headlight housing, only to have the…
You can place your projector on any table you want quickly and easily. Support for table or board for HY300pro projector, support table thickness between 60mm and 10mm. You will only need an M5 nut and an M5 to 1/4 adapter for assembly,…
The pedestal was printed on a Bambulab P1P with PETG filament from Prusament. The assembly is carried out with 2 flat head screws, and the fastening system is with a clip that holds the platform.
Needed to mount a generic spring loaded pull-up projector screen to a wooden beam from the front part of the screen. Built in mounting options only allowed mounting to the ceiling, or to a wall on the back side of the screen. These end…
A simple wall-mounted remote holder for Epson projectors fitting multiple models of their remote. It can be taped or screwed to the wall. Print vertical, no supports required. Update 2019-02-06 Updated the model to fit more snugly newer…
About Ceiling or wall mount for HY300 projector. Other material M6 Screw - for securing projector to mount 4x dowel and screw Recommended settings: Material: PETG or PLA Layer height: 0.35 mm Infill: 20%
This is a holder for the Little tikes story dream projector books and figures. I was tired of my 3 year olds little tike books laying all of the house. I created this in Fusion 360. This is my V1, so if there are any concerns or…
This gear is an 18 tooth gear made to replace the stock gear used by EPSON with their Cinema Filter on some of their projectors. The stock gear will often wear out and the teeth will disintegrate over time. I made this gear thicker than…
Ceiling mount for the OPTOMA UHD50 Projector. Projector bolt positions are taken from the mounting section of the owner's manual and line up perfectly on mine. I printed the top and bottom pieces out of PLA at 50% infill, the gimble piece…
I designed this mound for my little LG projector. It has a regular camera tripod mount nut. Print Settings Printer: Graber i3 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Grid Filament: Generic ABS Blue Notes: I printed it with 5…
A new design inspired by the illusion of movement form slide projectors. No matter how you rotate it, it will always look the same. Used Filament: This model was printed using Aircraft Grey Matt PLA from FormFutura The FormFutura team was…
Simple friction/push fit mount for fan. " No-airguide" version is default version (pulling hot air from projector). Mount it on side closer to lens. Use USB fan on low speed or you can use USB/PWM Governor (from Aliexpress). Versions:…
I have designed a wall-mounted shelf for the HY300 projector. The stand includes space for headphones and a remote control. It has mounting holes, but I preferred to use adhesive because it allows me to adjust the angle of the projector…
Soporte para el techo para proyector Epson (eb-93h en este caso). Antes siempre ponía y quitaba el proyector en una mesita y usaba un cable largo con un altavoz bluetooth Sony delante de la pantalla con la entrada auxiliar, pero me cansé…
Although this is designed for a Epson PowerLite Home Cinema 1040, you can redesign the bracket that attaches to the bottom of the projector to align with mounting holes on other models. This is a remix so that the projector is free…
5 GOBOs that can be used with my projector https://www.printables.com/it/model/480606-gobo-projector-for-bowens-mount-flash-godox-ms300v You can find 2 spots, some geometrical patterns and a GOBO suitable to hold gels. Fusion 3D file…
Print in PETG , ASA or ABS if your light source heats up. If you are using a single RBG led that keeps cool , you can use PLA
This project is a slide projector for the Godox round head of the AD200 flash. I print with PETG for decent strength and temperature resistance. PLA would probably be problematic. I printed it with full supports, 0.2 mm quality setting on…
Mount for projector controller, only 3 M3 screws needed!
Update 28.05.2024 - more smooth version, with rounded corners and better inside holes. All look more smooth and clean. :) Need to be scaled to your own requirements. I divided it into 2 parts.
Wall Mount for Wanbo T2 MAX Projector/Настенное крепление для проектора Wanbo T2 MAX To build, you will need/Для сборки вам потребуется: 1) Screw m8x100mm or threaded stud/Винт м8x100мм или резьбовая шпилька 2) Nut m8/Гайка m8 3) Screw…
Here is a simple projector mount I made for use with my HAPPRUN Projector. I split it into two halves to be able to print on an MK3S printer with a smaller build volume. Base is 228mm x 228mm (~9x9in). Fits compact projectors well. To…
A mini shelf made for a mini projector with UNC ¼-20 bolt and remote control storage. Can be mounted upright or upside down Does not need supports Picture was printed with .4mm nozzle, no supports, and with PLA Used #7 screws to mount to…
So you just bought yourself a fancy Nebula Capsule 3 Laser projector and the darn thing doesn't even come with a stand and it wobbles too much on the small tripod you had lying around, eh? Well have no fear, because I had the same problem…
This projector stand allows you to put your projector behind your bed. It projects the image to the ceiling over your bed! Print two of them so you can put your projector on top! The bedframe in this model has a thickness of 42mm but the…
So i had this projector and the little riser that is supposed to pop out is broken. Plus, it never really went as high as i wanted so i was always using stacks of random books or other flat things to rise it up. No more! This little handy…
R2-D2's “Holoprojectors” are one of the few “found parts” on the original 1977 costumes and filming props; they began life as reading maps for the Vickers Viscount passenger aircraft. To prevent people from burning their hands on the…
Honestly this can be considered anything you want to connect 20mm conduit with to make a frame for, I just happened to have made it for a portable and collapsible projector screen for my pico projector. I printed these in a config so I…
Transform a led tea light to a nice projector.
A friend was putting the Elephas WK1 up high on a shelf and needed a way to tilt it down securely. I designed this. It is reversible and can be mounted to tilt down or up. I don't know if this mounting system is universal or not. Feel…
Dust cover for the Blitzwolf BW-V5 Projector lens I printed this at 0.2mm resolution with a 0.6mm nozzle and it fits nicely and shouldn't fall out easily.
EXACT FIT, Lens cover for Magcubic AMAZON/EbAy Projector Mini Projector with 5G WiFi6 BT 5.0 Android 11, Portable Projector 4K 1080P Support, Smart Projector Auto Horizontal Correction,180°Rotatable Outdoor Movie Projector…
Star Wars holoprojector Supports: No Rafts:Yes
A simple stand for my Wanbo projector, but seems to be suitable for any projector with the same size Fixation by the bo
I recent bought a JIFAR projector (link) and felt as though the single kick stand leg wasn't enough to properly level and raise the projector. I created these universe legs and mounts to work for my projector, but they should work for any…
LUMIERO is a small handheld 35mm projector I designed for a university course on "expanded cinema". It can handle up to 20m of film and uses a camera flash as lightsource(will be changed in future versions). With LUMIERO you as an artist…
English: Cover for MiniBeamer MagCubic HY310. Different versions: with text and without text as well as with and without hole for cord. https://de.aliexpress.com/item/1005008564925682.html Deutsch: Abdeckung für MiniBeamer MagCubic HY310.…
Illuminate your Halloween nights with new scenes This 3D-printed decoration casts eerie shadows on your walls, creating a captivating and spooky atmosphere perfect for Halloween celebrations. This year's tea-light projector features four…
For this new version has been considered the possibility of connecting a tv stick to the projector, because this type of equipment currently does not have the support of the most popular streaming services, for that reason it is necessary…
A note about the wall-hook competition: A ceiling is like a wall when you're laying down! :D I was dissatisfied with the way my new green-screen was supposed to be attached to the ceiling. They suggested using chains, and because of my…
This was originally based on the Star Projector model by maegodhavemercy. All i have remixed in this is added tabs and screw holes to the sides so you can secure it shut to keep small inquiring hands out of the base. modeled to use M4…
Needed a stand to angle my projector for some mapping projects. This one was designed to work with an Optoma but is generic enough to fit other brands. It's designed so you can use it with a bunch of different angles by putting the…
I originally found the model here on Printables ( link to original model ), and I want to start by giving a big thank you to the creator for the great work! 🙏 I've made a small tweak/improvement that helped in my own setup – maybe it can…
My projector was sitting on the bed head so when watching a movie we had to move to one side of the bed to watch to not block the projection. Now with this stand, it is at a height where we can sit wherever we want and less noise as it is…
I was not happy with the mounting angle of this LED star projector. You can only choose between three different angles when placing the lamp on the floor or a shelf. So i created this neat little stand that perfectly fits to the fins on…
No hardware required as i designed it for my dorm room. Requires 9 25lb command strips to mount the projector to the mount and the mount to the ceiling. 10 degree projector angle.
Simple Adapter so you can try out old Projector Lenses on your E-Mount Body. Three Versions: slide: lens slides freely, no thread engagement. twist 1mm: Key engaging with the lens threads 1mm offset from the front twist 16mm: Key engaging…
The Bomaker C9 is a nice and cheap projector that's popular for pattern cutting. The pattern is projected onto the fabric from above, and the fabric can be quickly marked and cut without needing to work with unwieldy paper patterns. The…
You will need to get the female for the tripod screw size which I bought for quiet cheap on Aliexpress. Also some M4 screws (preferably something over 10mm), if you have a good printer maybe you could print some? I bought metal ones.…
Cap for benq projector lenses, designed for the mx660 model. It fits perfectly. On the outside it has the logo of benq and on the inside that of ho-kago tea time (musical group from the anime k-on). This projector did not have the cover…
A sound boost/projector device, designed for iPhone 15 Pro max with a case. So it should fit most phones which have speakers in the bottom. Directs/projects the sound out the funnels. You need one base, two funnels, and four feet.…
This is wall mount for HY300 projector that enables mounting of additional cables behind it. theres also additional slot for chromecast dongle. If you are not able to set the correct angle on the projector there is also option to print…
A few years back my wife got me the original Nebula Capsule and I've finally gotten around to making a little shelf for it. While this is my first model for it, it's gonna be far better than our previous solution of propping it up on the…
lehký jednoduchý stojánek pro promítání z telefonu Unihertz Tank 2
A remote control holder has been added. Also, I've made a ring for those who already have a tube, so they don't need to reprint it. Attention. When printing, you'll need either the ring or the tube
Easy access to all controls/ports and clears all vents. Mount that adds a VESA/tripod hole to an Epson CO-FH02 projector by attaching an Epson ELPMB65 mount to the projector. two straps that pivot on the front and snap on the back with…
This is designed to use the cardboard core found at the end of a roll of paper towels. In the photo, you will see that white paint was needed to help see the sun's image better. Cut out a notch in the side of the cardboard tube at the end…
