154 modeli
Recently I have started to enjoy plaing games on my PS2 again, if it just weren't for this noisy fan! You can hear it several meters and it annoys me. Looking for a fix I stumbled across kaputniks design on thingiverse. It lacked some…
Wydruk około 3,42 €–4,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Design I designed a converter for a 2.5" HDD to fit in my PS2 (with the network adapter, and the SATA mod) without it floating around. The bracket slides into place, where it holds firmly. Hardware All you'll need are some small screws to…
Design I had originally designed a 2.5" HDD Caddy for the PS2, and then recently found out that a certain company had used that to make a commercial remix to support 3.5" drives. All my models are released as non-commercial to avoid such…
Video Game Stands (PS1,PS2,PS3,PS4,PS5,PSP,XBC,XBO) by nibor_repmek - Thingiverse
Basic / Minimalist PS1 PS2 Controller stand I designed. Couldnt find one that i could print and liked using my Ender 2 Pro ( small Bed ) just print all 3 PCS, no supports needed at all ( just orient them right ) and snap together. i had…
Print twice or use the single model.
credits to https://www.thingiverse.com/dphirschler/designs I really liked the ‘minimalistic’ design in comparison to any other models had seen and was my first ever make once i put my hands on a 3d printer to almost complete a project…
I created this for my Playstation 2 controllers. It is completely printable without supports and in one piece. And keeps the cables nice and tidy behind the controller itself. I believe the original playstation Duel Shock Controllers are…
This is a remix of the original 3.5” HDD caddy designed for the PlayStation 2. It was was created to address specific needs for taller HDDs and enhanced usability. Like the original, this caddy supports both IDE and SATA (converted)…
A simple mod for the Slimline PlayStation 2 that protects your discs from getting scratched by the lasers ribbon cable. Support for both laser types! The mod should work on any PS2 Slim model in theory but confirmed to work on 70004 &…
Created a while ago. Vertical stand for SCPH-7XK Attaches to PS2 Slim with one M3x12mm screw. Nothing complicated. Version for SCPH-90K model here Screws I usually use: https://www.amazon.com/gp/product/B014OO5KQG Print Settings Printer…
This is a holder for 3 or 4 Original 8MB PS2 Memory Cards (Magic Card)
Vertical stand for the PS2 Slim 2 (SCPH-9000X). It's also compatible with the Slim 1 but wouldn't it be better to use the correct one for authenticity? The shape resembles the official design. However this is a vase design in order to cut…
ATTENTION EBAY/ETSY/ETC SELLERS. IF YOU ARE GOING TO SELL THIS MODEL FOR THOSE WHO CANNOT PRINT ONE THEMSELVES, GIVE PROPER ATRRIBUTION. IF YOU CONTINUE TO TRY AND PASS THIS OFF AS YOUR OWN I WILL PURSUE TAKEDOWNS . This is my take on a…
I tried using RetroGameRevival's file PS2_2.5inch_HDD_Caddy_GameStar_Full for my PS2 system (SCPH-39001) and it was 2mm too wide on the right and the HDD needed shifted left 1mm in order for everything to line up. Rather than trying to…
I printed these in 0.3mm height all in one go - which took around 4 hours to complete a full set. Result snaps together perfectly, and holds the MC's in place for easy storage. Enjoy! Update 3/4/2021 I have Added Extension pieces you can…
Also check out: https://www.printables.com/model/908877-ps4-mini-game-case-keychain And https://www.printables.com/model/908860-ds-mini-game-case-keychain Thank You Since there weren't any free mini game cases I decided to make some I…
Designed and tested for flexible filament.
The PS2 is region locked so it is not normally possible to play discs from outside your region, or burned discs (often referred to as backups). It is possible to counteract the region lock by disc swapping using a utility such as Swap…
I made this stand for the PS2HDMI adapter so it doesn't hang and put stress on the AV port of the PS2. This stand should work on both the Slim and Fat models. This has a really tight fit, but after putting it and taking it off one time,…
Printed with a .2mm resolution with 20% infill. No supports needed.
I liked the caddy that is available from Stone Age Gamer but i didn't want to pay for something I could print myself. I also wanted something simpler so i remixed Portion's and RetroGameRevivals' models together
Print supports will be needed for the clips. Mount to your wall, shelf, or cabinet using #8 flat countersunk screws. Spax #8 T-20 T-STAR plus flat countersunk head yellow-zinc screws are recommended for maximum dramatic overkill of 477…
Inspired by other, extremely overpriced brackets for connecting 2.5" SATA drives to early model PS2s available on retro gaming websites that wound up being 3D printed already, I designed this alternative that both uses less filament and…
They aren't perfect and can use some adjustments. The clip ones are quite weak,
Blueretro case for minified ESP32. Will work with PS1, PS2, PS3 (via adapter), XBOX 360 (via adapter). Recommended material: PETG/ABS/ASA. Will work with PLA but could deform since ESP32 gets kinda hot. What is blueretro? BlueRetro is a…
PS2 Noctua Fan housing (NF-A6x25) Information I couldn't find any available, so decided to make my own. Idea had been to be as non-destructible as possible, so this one clips into the fan-grill on the back. Due to printed clips not being…
I dug out my old PS2 Slim and one of the foot was missing, so I decided to design it and print it! I printed it in TPU, with 25% infill, no supports. It looks great! it may be a bit difficult to insert, but it sticks perfect!
playstation 2 fat / PS2 FAT
I picked up a pink PS2 Slim a while ago, which for some reason had the Bezel on top ripped off. This seemed like a nice opportunity/reason to remake that part, it's a simple enough model that made a nice quick practice for me. I have…
You will need the following items for this print: ESP32 30pin USB-C Dev board, these are common on places like aliexpress https://www.aliexpress.com/item/1005006336964908.html Ps2 Controller Male Connector, you will need to bend the legs…
This model is the smallest I could make it, and has been designed around Micha213's PCB (https://github.com/Micha213/BlueRetro-PS1-2-Receiver). What to order: 1 x PS2 plug from AliExpress 4 x 6mm M2 screws 4 x 2mm M2 heat set insert (3mm…
Hi Internet Sim Racers, If you've printed a 70mm Hub adapter from any other modeler, and you've decided you want to extend or put in an insert for your 6 Pin DIN connector in the hub to make it connect to the wheel like the original.. You…
I bought a PS2 Hyakushiki SCPH-55000 GU but it didn't come with the bundled special stand. So here's my recreation of the stand. Print Print the two decorative plates in horizontal position for best quality. * Recommended layer height:…
Soporte para poder poner la ps2 en vertical, ademas cuenta con un hueco para poder guardar una Memory Card
fixed model for stl printing while adding personality to it
Playstaion 2slim/PS2slim
A simple design similar to the original. Print in TPU for the best grip.
I made these to add a bold look to my old Epiphone LPS2 (named Vör) and designed a new pickguard to accomodate the addition of a 3rd humbucker. The selector ring should be printed with a different color for the first layers to get the…
Ein kleine Stütze für den Analoge2HDMI / ElectronAnalog Adapter von Electron Shepherd für ein Playstation 2 Slim. Hier Speziell für eine SCPH-70004. Verwendet wurden M2,5 Schrauben.
What it's for A drop-in replacement for original PS2 fan. It adapts Sunon HA60151V4-1000U-A99 fan to fit inside old fan slot. Does it need to be Sunon? No. The little tabs holding the fan in place are tailored to Sunon, but there's a…
print with supports 0.28mm pla 20% infill
It print best for me if I select the rear 45 degree plane for the base layer.
This adapter suits the PlayStation 2 Expansion Bay with ethernet that has the sliding/moving metal brackets for IDE/Molex. This allows easy and secure installation of the widely available SATA adapter kit available for this. The screws in…
I used these decoy boards:…
This is a quick rework of ilvise's Sony PS2 FAT hdd adapter mount to fit thicker (15mm) hdds. Original design = https://www.thingiverse.com/thing:4749540 Category: Video Games
Hello, Today I have a Playstation PS1, PS2 controller holder for you The controller fits beautifully into the stand. They will beautify any video game collection. It is for a special type of controller for PS1, PS2 Classic controllers…
Ive redesigned this tray from scratch since many of the cheap solutions are unreliable and possibly incompatible, I was looking for a way to use the StarTech IDE2Sata adapter with the original PlayStation2 network adapter. With this mount…
Minimal vertical PS2 Slim stand originally designed by @ShadowMoses and remixed by me with these features: Memory card section removed Optional versions with or without ventilation
Fret buttons for PS2 version of Guitar Hero World Tour controller. Modeled after the original fret with slight modifications. Made for low profile Kailh switches with 1mm indentation for the switches. Made for PS2 World Tour guitar…
Stand for the original “Fat Body” PS2. They sold an accessory like this back in the heyday of the PS2 but it was unnecessary and I don’t think it sold very well. There’s still a few on Amazon and eBay but for exorbitant prices. I didn’t…
N'hésitez pas à me dire ce que vous en pensez et surtout à lâchez un p'tit commentaire ça fait plaisir et ça me donne de la force ! :) je vous ait mis mes paramètre en photo pour que ça soit plus clair pour tous le monde. Si vous voulez…
This is a remix of Codex's mounting bracket for the SCPH-10350 version (and possibly other versions) of the PS2 Network Adapter for use with the SATA upgrade board. I printed the original model and it came out a little strange on my X1C.…
Una visualización tridimensional del icónico logotipo de la PlayStation 2. Esta recreación en 3D busca representar fielmente el diseño original del logo de la PS2, pero con una mayor profundidad y volumen que la versión plana. El objetivo…
Simple bracket/caddy for a 3.5" IDE HDD to fit inside the original PS2 with a Network adapter. Other bracket/caddies seem to be designed for SATA drives which don't fit IDE as the drive needs to be recessed slightly (about 3mm), at least…
Information This mod enables you to delete the old PS2 FAT PSU and replace a segment of it with USB PD. Parts The following parts are required to complete this mod: USB-C PD Trigger Board (Terminal Version):…
I added the holes from the PS2 caddy cross mix (by Earth4sX) to the short Gamestar version of the tray (by RetroGameRev
If you want to mod a launch model SCPH-3000x PS2 e. g. with a silent fan, you need an adapter to mount the fan. Unfortunately there is no other solution for the oldest PS2 systems, because the piece, where the fan sits in place, can't be…
For those of you who do a bit of console modding and are wanting a bracket to hold an SSD in a PS2 storage bay. I found some other brackets were a bit flimsy and left a bit of room for the SSD to shake around so i made a bracket that…
Replacement 3D printable part for the PS2s controller d-pad bracket pivot. Tested with Bambu A1 using eSUN PLA with beading. Made with FreeCAD. Surely can be improved, first CAD project I ever do.
Based on https://www.printables.com/model/808368-ps2-usb-pd-plate by Arkwolf. I tried to make it look more simple. Like Arkwolf stated: USB-C 20v 5A PSU is needed. 12/15V only gives out 3A max and therefore is not sufficient (my PS2 shut…
Simple in-slicer-created remix which fits ps3 gamepad with charging cable Fits ps1 and ps2 gamepads (last photo)
Shield to prevent bent ribbon cables from scratching discs (common fault on Playstation 2 slims). Only compatible with laser model SPU-3170. Needs to be glued to the laser assembly (the console needs to be opened in order to do so…
I printed it in ABS for better durability, with supports
Compatible with a 60x25mm fan and PS2 FAT SCPH-3900X only. Go to the original model's page for additional information and required STL files: https://www.printables.com/model/394175-playstation-2-quiet-fan-mod-compatible-with-fans-f
Should be printed in flexible material, sized for Flex to have just a bit of retention force in the port.
A simple shield to prevent the Retro GEM and accompanying ribbon cable / WiFi antenna + cable from coming on contact with live AC power should the antenna or Retro GEM come loose. Probably an overcautious precaution, but I feel better…
Set up your CPS2 vertically on the ground with these feet.
This is a display stand for any media in Switch game cases, DS and 3DS game cases, DVD cases (PS2, GameCube, Xbox, Xbox 360, movies, etc.), CD jewel cases (single CD PS1, Dreamcast, Turbografx 16/PC Engine, etc.), Bluray cases (PS3, Xbox…
Vertical Stand for PlayStation 2 (3D-Printed) Material: PLA Color: Customizable Compatibility: Play
You may need to sand down the bit when it's done printing, as when these things break off, they won't break cleanly.You may need to sand down the bit when it's done printing, as when these things break off, they won't break cleanly, and…
You will need: 2x 12mm M2 screws 2x M2 nuts Male PS2 gamepad Connector ESP 32 Mini
A PlayStation 2 slim vertical stand with a screw hole, no supports needed
For all the nostalgic people (like me), I created a copy of the GTA Vice City Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
Print in ABS Layer 0,2mm Infill 20%
Case for two joysticks from Chinese shopping platforms. Joysticks are typically used with development boards such as Arduino, micro:bit, ESP32, Raspberry Pi.
Remixed version from these: https://www.thingiverse.com/thing:3886448 Made the back a hex shape, so with inaccuracy of 3D printers the 2 halves of the Shell wont pry apart. Also added a little recess to get them out slightly easier…
Super small and simple mount to hold a Noctua A6-15 Fan in the stock location on a PS2 fat. I have only tried this in a 30k model but I Imagine it would work in others.
For those who want to display their PS2 Slim. Two part wall mount that allows you to slide the console when needed. Elegoo PLA+ I printed using 4 walls Infill - 40%
fairly basic memory card holder developed in tinkercad, prints well, needs to have the logos glued in. can have the Ps1 logo print in multicolor (see attached picture). please comment with questions or concerns.
Diseño Este modelo está inspirado en un controlador clásico de PS2 y diseñado como un llavero compacto. Su diseño detallado mantiene las características originales de los botones y joysticks emblemáticos. Uso Perfecto para los entusiastas…
Rack ears for a Goalake PS208G POE switch to fit in a 10inch mini rack Printed in PETG, 4 walls, 35% gyroid, ABS would probably also work, but PLA may be too temperature sensitive for this. M3 BHCS approx 6-8mm long should be good for…
The IBM PS2 Model 25 Stand is the perfect accessory for your Hand386 Handheld computer! Print the buttons in blue, the outer bezel in light grey, the inner bezzle in dark grey, and the lenses in translucent plastic. They should press fit…
To make this adapter you'll need: x4 M3 nuts x4 M3x14mm screws x1 Controller cable for PS1/PS2 (I used one from a generic controller) x1 Esp32 of the following form factor (see picture below) I recommend testing it after flashing it…
Made a hold down bracket for A6x15 Noctura fan mod. "Should" work with other 60x60x15 fans. Used .2mm resolution, regular PLA at 10% infill. Print on side and use supports.
Hello, I have a TV controller stand for Playstation 2, PS2 for you. This is a special controller stand for PS2. It should be absolutely accurate and has a socket for the console connector - it is compatible with the PS2 controller. I used…
A vertical stand for the Playstation 2 slim edition OnShape Model https://cad.onshape.com/documents/f3a53f2d6a42986528219461/w/3923617954cba25f6aee205b/e/0b90fd49f6e74bb7e3f60d3b
Perfect fit for the original PS2 remote (Sony DVD/PlayStation model) Slightly tilted front, ensuring better viewing and access to the controller Clean and stable design, ideal for display or organization 🖨 Printing Recommendations:…
Printing Defaults settings with no supports worked for me, using PETG. I set the bed plate in the fridge after printing to ensure the part cools completely before removing, else it can break. Should snap into place as a battery cover…
PS2 Ultra Slim is a PS2 79xx modification created by Wesk to make the PS2 slim even smaller. Rapha on the Bitbuilt forums adjusted the shell for USB-C and original power adapter use and made the Playstation 2 mini rotatable logo that…
This is a WIP case design for a split using PS2 sockets to connect both halves.
If you don't have or just don't want to use a Dremel, this jig is perfect to make a clean and precise cut. Add some flat sanding and you will be good to go in minutes!
For all the nostalgic people (like me), I created a copy of the GTA San Andreas Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will…
I like the PS2 version and also have a MacBook Air M2, so I remixed it to be used with a MagSafe 3 charging cable. The model is snug fit, so you may need to push a bit harder.
In diesem Gehäuse lässt sich ein Arduino Nano mit einem USB-Anschluß und einem Amiga-Mausport Stecker unterbringen. Man brauch einen Arduino Nano , eine USB-Buchse und einen 9Pol Dsub Stecker female. Die optische Maus muss das PS2…
Nothing special. Printed in PLA. No supports needed if your printer can do 45 degree angles. No fancy latches or anything, I intend to super glue the halves together.
🇪🇸 Español 🎮 Para el cumpleaños número 18 de mi hijo elegimos una temática gamer. Como parte de la decoración diseñé una colección de porta servilletas con forma de controles retro. En esta ocasión el modelo está inspirado en el control…
For all the nostalgic people (like me), I created a copy of the Max Payne Playstation 2 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print will not…
![DIY Blueretro 5in1 [PS1, PS2, PS3, XBOX360] - guide on description](https://media.printables.com/media/prints/629834/images/4989945_188c260e-8dd5-41da-a0ac-36ffe29a7357_91bded45-4751-4250-9ef1-fa21992d5f44/photo_2023-10-28_23-53-27.jpg)
