60 550 modeli
The siphons are printed separately and then simply pushed into place. I did it this way to avoid using supports. Water level indicator The floating water level indicator is a bit tricky. Print the indicator (1 perimeter, no infill),…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
I did not make this model, but decided to upload it here so it is preserved. Just in case it gets deleted from official site ( https://projecthailmary.com/ ). 3D Model Print Instructions: Grace Sculpture Keychain This model includes two…
Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu
This fully functional Cryptex has an easily changeable code and is modeled after the Cryptex described in the novel 'The Da Vinci Code' by Dan Brown. (Thank you Prusa team for this wonderful video of the Cryptex) Design I made this…
Wydruk około 0,27 €–0,33 € nettoWstępna wycena jednego wariantu
Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…
Wydruk około 4,15 €–5,07 € nettoWstępna wycena jednego wariantu
👇 Click the image below to explore my other 3D printable models. ✨ I prefer print with PETG filament. Z mount connection Z mount slepení Glue the two parts of the Z mount. The top edge must be lined up. Alternatively, you can sand it. To…
Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu
Strong shelf brackets designed to hold a 300mm deep shelf board! These were made with Fusion 360's topology optimization feature for the unique look, but they're definitely not too shabby in the strength department, either. Each one holds…
Wydruk około 13,31 €–16,27 € nettoWstępna wycena jednego wariantu
Inspired by https://www.prusaprinters.org/prints/63523-laptop-stand I created this stand that raises the laptop a bit higher. It is compatible with Prusa Mini and I printed it with Prusament PLA Galaxy Silver with 0.2 layerheight, no top…
Wydruk około 3,55 €–4,33 € nettoWstępna wycena jednego wariantu
This is an stand for an latop iPad and an e-book with al hexagonal pattern. There is also a solid version if you prefer a cleaner look. If you want to modify it to fit perfectly on your devices follow these steps. Measure the width of…
Wydruk około 7,95 €–9,71 € nettoWstępna wycena jednego wariantu
UPDATE : I had issues printing the honeycomb when the two pieces were not aligned 100% the same. Caused an issue when I inserted the 1/8" rods (not being perpendicular) So, I added three 1/8" holes that would always print the same place,…
Wydruk około 5,19 €–6,35 € nettoWstępna wycena jednego wariantu
I seen the contest: last meters to make good use of the last meters you have. So i thought lets do something. im not a designer, but i wanted to make something to minimize plastic waste and make something useful. i made some small cable…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is the well known Temptower from Tronnic as .3mf to load into PrusaSlicer as well as sliced and ready for the Prusa Mini. Just print the gcode. All gcodes were created with PrusaSlicer 2.2.0 using -) PrinterSetting: "Prusa Mini"…
Wydruk około 2,57 €–3,14 € nettoWstępna wycena jednego wariantu
A replacement filament spool holder for serveral Elegoo Neptune FDM 3D-printers. If you want a second spool holder, your spool holder broke or your spool is to small to fit on the original one. Supported Printers Elegoo Neptune 3 Pro…
Wydruk około 1,90 €–2,32 € nettoWstępna wycena jednego wariantu
Vertical laptop stand with different options for an inner gap to fit variable thickness. The model is printed in 4 parts to avoid supports and to have nicer surfaces: 2 sides and 2 bottom brackets to hold everything together. Assembly…
Wydruk około 4,59 €–5,61 € nettoWstępna wycena jednego wariantu
The Velociraptor Head is a little more complex to print than many of my other animal heads because the teeth require support. You will probably also want support for the back of the jaw, but this model printed fine for me without support…
Wydruk około 21,38 €–26,13 € nettoWstępna wycena jednego wariantu
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Tip is thinner, handle with care! Keep your charging ports spotless with the Port Cleaning Tool V2! This optimized version is specifically designed for…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
The frame rate doesn't do it justice, but it does indeed spin like a helicopter! Maple trees are a diverse group, boasting around 132 unique species. These trees produce seeds, commonly referred to as double samaras, which come in a range…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Print-In-Place Folding/Expanding Laptop Stand that holds my 14" Dell Latitude 4500 Laptop at 45 degrees with zero issues. All interlocking parts are designed with 0.5mm gaps. Print instructions 0.4mm nozzle 0.2mm layer height 20% Infill 3…
Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop stand with cables holes. In slicer remove top and bottom layer and add infill as wanted. I used honeycomb. For link I recomend use at least 45% infill. I use more than 2 perimeters to make it stronger. Material: PLA, ABS, PET-G,…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
Minimalist Duplo - Brio, IKEA, Wooden Train adapter that you can use for connecting Duplo bricks with wooden train tracks to make bridges and slopes. The peg on the outside is modified a bit so it fits on a Duplo brick too. Print with…
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
Laptop stand for my 15" Dell Vostro Two versions: with Dell logo without any logo You can also use the Fusion 360 (.f3d) source file with customizable inner gap via user parameters for other models. The inner gap for laptop is 23.5 mm…
Wydruk około 6,83 €–8,35 € nettoWstępna wycena jednego wariantu
This holder for the Prusa Mini power adapter/supply, uses very little material and takes short time to print. It is designed to use with a countersunk screw of Ø4mm with a Ø7-8mm head. The two brackets provide great support and require as…
Wydruk około 1,74 €–2,12 € nettoWstępna wycena jednego wariantu
Tried to adjust the Z-mount and the 90 degree extruder so that another chain can be attached in X-direction. Unfortunately I only had the STL files available, so there might be small errors in the mesh. Didn't want to re-model the model…
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
This is one component of Yet Another Drybox . If you are planning to build your own box, have a look! You might find other components useful for your build, or maybe you even end up building the complete box 🙂. When building my filament…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
Wydruk około 10,26 €–12,54 € nettoWstępna wycena jednego wariantu
A NEW VERSION OF THE CASE A V2 is Available HERE : https://www.printables.com/model/1120097-flipper-zero-case-v2 SnapBumber for WifiModule : https://www.printables.com/model/392270-flipper-wifimodule-snap-bumper-v10 i'm learning 3d…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple jig for PTFE tube cutting (4mm OD), having: 60° (30), 90° (45) and 120° (60) degree chamfer tool (works like pencil sharpener) Length of 13, 15, 19, 35.3, 38.8, 42.3, 43.4, 44.2, 50 and 66mm cutting tool Needed tools: Sharp blade…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Replaces the PTFE holder (screw on compression thingy), with M10 couplers. You will need PC4-M10 passthrough fittings like these. https://www.amazon.com/gp/product/B01IB81IHG/ref=oh\_aui\_detailpage\_o00\_s00?ie=UTF8&psc=1&tag=tv-auto-20…
Wydruk około 1,03 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 16.12.23: STL files are now available English: A raised laptop stand with a honeycomb design. Additional I designed a fitting tray to hold the clutter of your desktop and a cable clamp that can bei fittet into the honeycombs where…
Wydruk około 5,31 €–6,49 € nettoWstępna wycena jednego wariantu
Universal pen adapter for the Cricut maker 3. Includes pen distance tool. works with anything up to the thickness of a sharpie. Pen distance tool rest/snaps on to the rail allowing you set a 3mm distance.
Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I printed a set of these but found them to not fit my Razer Blade laptop and also being a bit large. The angle the laptop gets with the original stand made it uncomfortable using the keyboard, I just wanted a very slight lift to help with…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
This is a guide for the Magnetic Printbed, so you don’t have the hassle of aligning the Printbed onto the Magnetic bed. Just put double sided tape on the two objekts and stick them in the back corners. Warning : Use heat resistant…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Simple sliding cover for your laptop camera. Use thin double-sided tape to attach.
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
My version of a Mother and Child sculpture from thingivers https://www.thingiverse.com/thing:1541512
Wydruk około 2,76 €–3,38 € nettoWstępna wycena jednego wariantu
UPDATE 26.2.2022: added V2, V3 for pillars (3mf for tighter connection to other duplo bricks and for better overhang printing) added short straight track (the size of ordinary straight original track) with big side protrusions, which are…
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
This is a set of Depth gauge for 5-12 mm drills. They have a opening for M3 nuts an cylindrical screws to tight the stop on the drill bit. Printed with PETG @ 0,2mm layer hight with 20% infill.
Wydruk około 1,29 €–1,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cette sculpture 3D de tête de cheval représente l’élégance et la force de cet animal noble. Le modèle est conçu avec des détails réalistes, allant des oreilles expressives à la crinière texturée. Impression : Convient aux imprimantes FDM…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
Pi Camera V2.1 Mount With Optional X Axis Cable Strain Relief for the Prusa MK3S & MK3S+ Printers. Note: added mount for MK3S+ (MK3SPlus_X-Axis_Bracket_Pi_Camera_Mount v1.stl). This is the only part that differs from the original MK3S.…
Wydruk około 1,67 €–2,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Raptor Engine from SpaceX Starship program. I've been following Starship for some years now, and I've always wanted a Raptor Engine to display. I could not find any on Printables or Thingiverse, so I decided to give it a shot and make my…
Wydruk około 6,33 €–7,73 € nettoWstępna wycena jednego wariantu
Created this so i had an exact fit with exactly .2m height on my Elegoo Neptune 4 Pro. Prusacliecer 3mf attached.
Wydruk około 0,24 €–0,30 € nettoWstępna wycena jednego wariantu
I've made a kit card model of the helicopter I really like. This model can be displayed everywhere and can be great gift. Printing instructions: Layer height: ≤ 0.15 mm Infill: 100% Material: PLA (PETG might work too, but I have not tried…
Wydruk około 1,96 €–2,40 € nettoWstępna wycena jednego wariantu
A one part Cheshire-style collimation eyepiece (1.25 in). More effective than a standard pinhole collimation cap, especially when lighting is not optimal. Update 02-2025: Added a version of the eyepiece with crosshairs. Make sure to print…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Quick mount that fits various PTFE fittings I found in junk drawers. Use short PTFE cutoffs, or full reverse-bowden with a longer tube. Prevents filament from scraping against the box during printing. Go full reverse-bowden (PTFE tube all…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Improved version of the 3D Pull Copter Finger Ring with a different rotor design. NOTE: Models not compatible with original design Features: Improved rotor design (bigger and angled differently) Somewhat longer key for easier use Uses M3…
Wydruk około 0,16 €–0,19 € nettoWstępna wycena jednego wariantu
Temperature towers for PETG and PLA that begin from hight temperatures. And GCODES for ELEGOO Neptune 3 Pro
Wydruk około 3,07 €–3,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Laptop stand for smaller laptops with a maximum width of 2cm (0.79 inches).
Wydruk około 3,43 €–4,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thread Gauge Tester: A Handy Tool for Measuring NPT Hydraulic Pipe Threads Looking for BSPP thread testers? You can find them HERE! November 10, 2024 Update: Added tester variants with a tab for easy organization on a ring, cord, or zip…
Wydruk około 2,18 €–2,66 € nettoWstępna wycena jednego wariantu
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Introducing the Cherry MX Compatible Flat Top Keycap, the 3D printed keycap that makes typing a whole lot more fun! With its sleek and stylish flat top design, this keycap is the perfect way to add a personal touch to your keyboard.…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Minimalist sculpture of a cat. Model based on an amazon sculpture. I recommend you to vary the original size if your printer has a greater volume surface! ;) PLEASE NOTE: If you take the .obj file to modify it, It is important to select…
Wydruk około 2,59 €–3,17 € nettoWstępna wycena jednego wariantu
This is a laptop stand/riser that's ultra portable and easy to print. Tested on Asus G14. Should work for most laptops. Print time about 1:30 h (for the pair) I've printed mine using PLA 0.25mm, 20% infill (default Prusa slicer profile…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
I have made an extruding nozzle sculpture/trophy/award. There are three pieces to this model: The base, which has no special printing recommendations. The extrusion pile, which should be printed with supports on overhangs greater than 70°…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
UPDATE: Version 3 included with better tuned dimensions and fixes based on feedback. UPDATED UPDATE: Thanks to Crosslink for featuring this in his video!! The extruder on the SV06 can get quite hot, due to the weak stock fan, especially…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
these easy to print and small laptop stand. ensure ventilation while gaming or rendering etc.. have fun world Print instructions these easy to print and small laptop stand. ensure ventilation while gaming or rendering etc.. i added my…
Wydruk około 3,05 €–3,73 € nettoWstępna wycena jednego wariantu
This is just a sample. Get full model from here . Instructions Gcode files are without top and bottom layers to get this honeycomb look. If You prefer to slice it yourself, then settings are: Perimeters: 3 layers Support material:…
Wydruk około 11,24 €–13,74 € nettoWstępna wycena jednego wariantu
Egyptian Sarcophagus Pencil Box or Dice Box. !! LImited Time Offer !! Download now and get a free Mummy. For now .. Just use a rubber-band to hold it together. If you are feeling industrious and want to hinge it or snap fit it Please DO…
Wydruk około 15,48 €–18,92 € nettoWstępna wycena jednego wariantu
Paint mixer - 100% printable - no support - optimized orientation Flawless mixing: High-vortex paint mixer for perfectly blended, streak-free paint in seconds. Easy to clean. Both parts are securely joined by a short 16 mm piece of…
Wydruk około 0,73 €–0,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Perfect for Mother's Day. Modified original by shrinking bottom plate, printed in two colors. Add filament / color change on Layer 22. Material: PETG Infill: 15% Grid Remix: https://www.thingiverse.com/thing:1541512
Wydruk około 2,69 €–3,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
4mm Thread Pitch, custom thread design that I used to better understand threads and bolting. Rather than try to copy a thread pitch optimized for other manufacturing methods I put some thought into optimizing for FDM printers. When I…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
Update 25.03.2024: Added a parametric and customizable version of the stand. Improvements The model was developed to enable fast and material-saving printing and at the same time to be stable. The print in size 25mm requires only 42g of…
Wydruk około 1,74 €–2,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
+++ Update from 06.06.2022: added the “tight fit” version “Spool_adapter_72mm_to_52mm_tight_fit.stl” (scaled to 101.5% - thanks at SquasherJoe!) for the really tight fit to 72mm Spool. Please check this version and write feedback in…
Wydruk około 2,32 €–2,84 € nettoWstępna wycena jednego wariantu
Info: for those who likes it REALLY long more info about print at long millipede print introduced spiral curve, so it can be much longer added also variant for Prusa MINI 200 vertebras print is in the end about 117cm long. Lengths: 200 or…
Wydruk około 12,16 €–14,86 € nettoWstępna wycena jednego wariantu
Update : there is now a version that can be mounted on the X carriage of the Prusa Mini :) Hi !! I'm a jeweler and use my beloved prusa MK3s to design invented custom tools for my craft. The visualizer challenge, encouraged me to create…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This lion head model represents strength, royalty, and wilderness. With finely detailed mane and expressive facial features, it makes a powerful decorative piece or educational model. Printing : Works well with both FDM and resin printers…
Wydruk około 1,47 €–1,79 € nettoWstępna wycena jednego wariantu
Ce modèle 3D représente un requin au design réaliste ou stylisé , parfait pour l’impression FDM ou résine. Il peut être utilisé comme décoration, jouet ou pièce d’exposition. Impression : Compatible FDM et résine Supports : Recommandés…
Wydruk około 1,07 €–1,30 € nettoWstępna wycena jednego wariantu
tool holder for Elegoo Neptune 4/4 PRO
Wydruk około 1,81 €–2,21 € nettoWstępna wycena jednego wariantu
I suppose that this stl may be useful to other n4 users also. This is ment to be a temporary fix. Mine extruder lever broke apart just after only a few filament changes. If your extruder starts to make clicking noises during the print, it…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update: redesigned version available here: https://www.printables.com/model/607312-ziptag-v20 ----------------- Introducing ZipTag. Easy and quick to print (5-6min per piece) zip tie style tag. Useful for cables, bags and other items. I…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Do you hate wasting toothpaste? I wanted something to help extract all the toothpaste from the tube and still look nice
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
The Neptune 4 Waste bin is a rectangular waste container that snaps onto the left side of the Elegoo Neptune 4 or Neptune 4 Pro. It may fit other printers with 40 mm square extrusion frames. It's surprisingly useful to have a little bin…
Wydruk około 9,82 €–12,00 € nettoWstępna wycena jednego wariantu
Simple yet fun toy to use outside! Be mindful when using indoors, your walls will thank you later. I created this model in aim to replicate ones seen at local events in my area. After researching more on these toys I found you generally…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Flat version of the Domed Cover...SnapAssy. Please NOTE! Remove the MicroSD Card before assembly and disassembly! You will need... Noctua 40x40x10 MM Fan 5V 2 Dupont female single pins to connect to 5V or 3.3V and Ground GPIO pins. You…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Nozzle contamination can be seen on the back.
Wydruk około 1,84 €–2,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you enjoy my work, you can support me with a small contribution ☕ It really helps me keep creating and bringing everyone’s ideas to life: https://buymeacoffee.com/teo_211
Wydruk około 1,10 €–1,34 € nettoWstępna wycena jednego wariantu
This is a simple laptop stand where you can print it without any top and bottom layers and play with the infill patterns and density to produce cool different stands. Also, you can increase or decrease the height of the model in the…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
Don't forget to hit the like button if this helps you :) A filament guide for the Ender 3 S1 gantry top rail, remixed to enlarge the hole through the eye of the swivel to be larger so its supports some PTFE tubing. OD 4mm is a nice snug…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
Update: 26.03.2024: complete redesign! Based on the linked remix I have completely redesigned the model. It is now fully compatible even with Elegoo Neptune 3 / 4 Plus and Max. No supports are needed anymore! Compatibility Fully…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena dla PETGMateriał u źródła: PET
https://www.buymeacoffee.com/maxt ---------------------- 2mm thick The model will fit on Prusa Mini+ (180x180) Feel free to size it up or down as you wish I strongly suggest sizing it up to fit your entire heat bed as it gives the best…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Prints PETG in 0.2mm layer height with no supports, a 5mm brim around adapter helps with bed adhesion. This is suitable for use with Stabilo 0.4mm fine pens. Print upright with thin part of the adapter touching the build plate. No…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hello fellow makers, I assembled the Lego model of the dune ornithopter as soon as it arrived, and realized quickly that it is too big to stand on top of my IKEA Kallax shelf with the landing gear down. Although a beautiful pose, I wanted…
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
V2 of this project comming soon. New version of is model avaliable here. The printer get way quieter after the change, the best mod I did on my Ender 3 You will need 2 M3 screws and a 4010 fan, of course. If you like this model check out…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena jednego wariantu
The adapter is tight so that there is no play and can withstand the load of the filament. The adapter is attached using the original spool holder screw. The Digital spool rack is attached using the original bayonet. Layer 0.2mm Perimeter…
Wydruk około 1,16 €–1,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
➡️ Check out also mega long millipede Info: for those who likes it long in original from @Loubie3D (thanks for the model!) is only 1 length of the centipede/millipede/catterprillar (the other is just a scaled variation, with the same 17…
Wydruk około 1,55 €–1,90 € nettoWstępna wycena jednego wariantu
Smart holder adaptér držák vychází z originálu, který byl modifikován pro sportovní sedadla vozidel značky Škoda, včetně pojistky proti vyndaní pokud je vložen držák multimédií ;) postup: tisk z PET-G (z důvodu vysokých teplot ve voze v…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Not my design, remix of ( https://www.thingiverse.com/thing:3388581 ) This fixes issue where figure wasn't flat on the build plane. Rotated -0.2 degrees to make it flat and cropped a bit to prevent overhang around the edges. Also:…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena jednego wariantu
This is a 60mm Noctua fan mount adapter for the Original Xbox. It was created to replicate the look and feel of the original Xbox fan (there are a few different fan models, but this one is based off of the Nidec fan). Improved airflow was…
Wydruk około 2,67 €–3,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
With this PTFE adapter, you do not need to drill holes into your Sunlu FilaDryer S2 to attach it. The connector is attached with some double-sided tape. I used 3M VHB foam tape, it is strong but easily removable. You need to remove the…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An ode to the cereal box whirly copter toy. This 4 piece, snap together assembly is easy to print and easy to use. Notes: Keep print orientation as is. Use supports on the cabin and bottom files. To assemble, snap cabin into bottom…
Wydruk około 3,73 €–4,56 € nettoWstępna wycena jednego wariantu
I used the Golf Ball Marker Template from Thingiverse (https://www.thingiverse.com/thing:3830902/files) an added the RPT pattern from the Original Callaway to it. For best fitting i had to scale to 101% maybe for your Printer you have to…
Wydruk około 1,79 €–2,19 € nettoWstępna wycena jednego wariantu
Remix of the awesome color change buddy by Clement to fit the Elegoo Neptune 3/4/pro family of printers. There are files included that have so far been tested on the Neptune 3 pro, Neptune 4, & Neptune 4 pro. If you find it works on other…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
Overview The core mechanism for an ornithopter's flapping motion! I've tried to modularize the mechanism so multiple can be driven (and offset if desired) from a single axel. v1.1 of the mechanism is complete and functional! I'm going to…
Wydruk około 2,41 €–2,94 € nettoWstępna wycena jednego wariantu
This is a simple Volkswagen Script Badge. Usually seen on old VW bugs. In comes in quite small on the print bed. I traced it off of an image. The cover image is an example of what it could become. You will need to scale it up by 5x to…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
Passionate about aeronautics, I drew this model because it is one of my favourites plane. Designed in several parts, this model can be printed without difficulty and with very few supports. With this model I introduce a new assembly…
Wydruk około 0,24 €–0,29 € nettoWstępna wycena jednego wariantu
This eagle sculpture showcases the fierce and graceful presence of one of nature’s most iconic birds of prey. Whether perched or in flight, this model makes a striking centerpiece. Printing : Suitable for both FDM and resin printing…
Wydruk około 1,71 €–2,09 € nettoWstępna wycena jednego wariantu
01.12.2024: Added a version without the logo as requested as well as a step file so you can add custom logos if you want to. I created this model in order to use my phone with a QuadLock Mount I bought. It just goes on the back of a…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Just print with normal settings (0.20), PLA or PETG would be fine. The only other material needed is a piece of standard PTFE tube. Added sliced files for PLA and PETG
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Here is a set of 10 different reusable zipties. You can print them in place. You do not need TPU, just use PETG. These with the lower amount of peaks are more flexible. Have fun with it.
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Phone mount for the Concept2 Model-D Rowing Machine. I was not happy with how the other mounts I found placed the devices above the rower display. Felt too high and unnatural to use during a work out. I created this one to mount just…
Wydruk około 2,22 €–2,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
