putting grass
putting grass
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
68 modeli
As an avid golfer, I'm always hitting a few putts between print runs, so I thought why not make some practice gates to hone my skills with! They come in 3 sizes 50mm, 60mm and 70mm wide, as you get better you can use the narrower gate to…
I designed this putting aid to help improve my sons aim with the added benefit of the ball rolling back to him if he doesn’t manage to get it in the target spot. I have also added a blank insert if you just want to have some fun getting…
Inspired by the Disc Dot, I waned to create a quick-printing aiming aid for putting practice. Latitude64 Pro chain size.
I needed a golf cup for a lawn competition. Couldn't find one that looked like it would be a clean print. So here is mine. Print Settings: Material: PETG, ABS, Nylon Layers: 0.2-0.28 Walls: 3-6 Infil: 8-30% Cubic
Turn any carpet into your new practice green! This easy and quick print lets you turn any carpet into you new practice green. I enjoy using it, and tossing it out like a frisbee to end up with a new random hole distance for practice.
Practice putting for the upcoming golf season. With a return ramp if you miss the hole. I have made it in two pcs so it will fit smaller printers like my prusa. Glue it togheter after printing Had to shrink the model to 88% in my slicer…
Golf Putting Cup, no support needed. The hole size is regulation. I printed at 35% infill so it does not move as easily when a ball goes in.
My friend asked for a golf putting hole thing and this is what I made. The main hole is 4.25 inches so it should be, regulation? Idk I don't golf haha
if you miss the hole the ball will roll back to you
Easy to print golf putting hole for training etc.
An alignment plate for putting practice & training to hone your skills on the greens of the golf course while safely at home or practice green. Simply place the mat and secure with a couple of tees (flush fit into the middle and rear…
The hole is the regulation 108mm diameter. Printed using 0.25 Draft mode on my Prusa Mini with supports for the hook.
I designed this for my coworkers and after many iterations, this design seemed the most accurate. The hole is regulation size and the outcome of your shots should be close to what you would expect to happen with a real hole at at least a…
Quick-to-Print Mini Golf Putting Game for Home STL-Versions: The ball is best printed in two halves for optimal results. However, a pre-assembled version of the ball is also included among the STL files. There are two different variants…
If you have nothing else to putt with print it. Personally I have much more expensive putting equipment but I keep comeing back to it.
Searching for a way to play golf in the office without breaking a mug, or using a "hole" that's just... not cool? I present to you: the answer. My buddy recently brought a putter and golf ball into the apartment - he will not put it down.…
A riff on the model suggested by a clever reddit user: https://www.reddit.com/r/golf/comments/1cr9wbe/putting_made_my_own_ball_marker_averaging_5_less/ Print at 100% infill with a color that will contrast well with the green.
This is a really cool articulating Minecraft player model. I wanted to use it with my friends Minecraft skin but the original model had a face on it that I didn't want so I made it flat. The face is now flat so that you can put any design…
Print this out, glue two together each, and you have two 250mm long profiles.
A hole with slope for training your putting skills at home. If you miss slightly the ball will return to you!
Work in progress. Based on this redditors design: https://www.reddit.com/r/golf/s/S9aR5hANGf Just an arrow with the tip cut out to align with your golf ball when on the green. Simply place your ball marker, pick up your ball and continue…
New style of an old idea. I remember my dad having one of these in the 70s/80s, out of sheet metal. There are 3 main parts to this: The Base You will need to glue the hinges to the base. The base has recesses where the hinges will go The…
This mat insert is inspired by the PrimePutt putting mat inserts. It is losly based on pictures of the original PrimePutt one because I had no physical version available to take measurements. The insert has a slight slope for the first ⅔…
Original design putting gate - the Putter Portal - lots of features: four settings to make the gate width bigger or smaller depending on how much of a challenge you want, simply turn the lever can be used as just one gate or joined…
A practice golf putting cup (ramp style) designed to give you a consistent, portable target so you can build a reliable putting stroke anywhere. Dimensions 32L cm x 26 W cm x 6 H cm Printing Tips FDM printer at 0.2mm layers and 10% infill…
Fair warning before you print I am new to Blender and 3-D modeling in general, However, I tried this and it printed pretty well. The hardest part was making sure the bottom surface was flat, so you don't get weird supports underneath. My…
I saw this model on Thangs but didn't want to pay for it, so I made one myself. The large piece is meant to go at the end of the table or desk. To make the actual golf club, stick a pencil in them. It is quite loose, so wrap just a tiny…
SteadyArc is a 3D-printable putting aid designed to help golfers dealing with Essential Tremor, Parkinson's disease, or other hand tremors maintain a steadier putting stroke during recreational play. For many golfers with tremors, the…
Fun and challenging golf putting hole. Have to hit it just straight and hard enough to make it in. Thats what she said :) Will need to split in slicer to fit your bed.
A "putting gate" is a training device used to practice putting in golf. The idea is to narrow down the focus to a smaller target. Included here are 3 different widths of putting gates, 55, 75, and 95mm. Two versions of each are included,…
Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…
Putting plate to fixate with tees and putt a line straight or with breaks. Hole may have to be larger that holds the Ball in place. STEP is included so put in more holes or remove some or modify as you like just post changes please. You…
Golf Display Base (Display Only) This model is a standalone display base designed to complement golf bag pen holders for a clean, executive desk setup. It’s styled like a putting green and intended purely for presentation. This upload is…
I modeled this in OpenSCAD since none of the putting targets I've found fit the flimsy chains of my Discmania Pro Lite basket. The included stl file (and the existing values in the OpenSCAD file) works for the chains on a Discmania Pro…
small medium and large putting gate, use asa for sun resistance
Just a cover/lid for the putting cup made by @Bencham95 - https://www.printables.com/model/1090683-golf-putting-cup-3d-print-optimised
I made this so i could practice the breaks i want to on the practice green. I didn't want a complete hole so it would take up less space in my bag. Easily secured with 2 standard size golf tees. The inner radius is the same as a standard…
I created these putting aids so I could practice putting at home. They are working well for me so I thought I would share them. Hope they are helpful to you. I am new to golf and there may be a better way, but these are fun for me. I am…
This is a tiny flag for a backyard putting green. Some deburring could be required to fit the flag into the pole depending on your filament and printer setup. Designed to not need glue to hold it all together. Added a second version with…
Simple 5cm wide putting gate that you can place on a putting mat (or an actual green). Distance from your starting point will determine the accuracy of the putt. A putt that makes it through the gate from the given distance has an error…
This is a cord wrap for a distance marking string for practicing getting perfect puts in disc golf. Insert the string in the smaller hole and tie a knot to prevent it from coming undone. wrap the cord around the perfect putting pal, tie a…
My head is just too big for most hats, including the ones sold by Disney. I wanted to have an ear hat, so I used Tim J's model and rather than attaching the plates to a headband, I put them under a baseball cap that fits with the ears on…
A funnel that fits cleanly over the threads of a classic Moka pot, but lets you spoon coffee over the entire filter, keeping the mating threads clear of coffee grounds. 1 cup and 3 cup sizes, or use the customizer to make a custom one for…
It is a blank medallion for you to put your own design on.
A training aid to practice putting it will tip over if not hit straight. It can also be used for chipping if turned on its side. 3 different sizes are available for varying levels of difficulty.
Vintage Putting Trainer - Battery Cover
Deutsch Ich habe eine Flasche gemacht, in die man Dinge hineinstecken oder verstecken kann. Dies ist das erste Mal, dass ich etwas geschaffen habe. Wenn es etwas gibt. Melde dich bei mir English I made a bottle that you can put things in…
Modelled after a popular putting gate style. Putting gates come in 3 sizes small-50mm, medium-60mm and large-70mm. Each gate requires 2 base parts. Supplied are a few options. Print with mmu or multiple extruders. One side marked only.…
Putting Challenge This is a 3 tier Putting Challenge Are you good enough to be the best! This game can be played indoor, outdoor at home and even steaked to the ground, it can even be placed over the mouth of a putting hole and steaked in…
I LOVE, putting butter on my peanut butter
Putting line. Attach 0.5 rubber cord to it and mark your aim line. Have fun and get better at putting. Printed ABS 15% infill. Magnet holes will fit 8x3mm magnets. STEP included.
Detailed 3D printable Chibi Luffy Putting On The Straw Hat With Determination figurine, ready to print on FDM in PLA. Usage & Links Personal use: print freely. Commercial/digital redistribution is only allowed with a valid Patreon…
I made this to run a length of CAT6 cable (6mm diameter) along a part of a house. The clips can be stuffed between the siding elements and the cable can be clipped in. Worked nicely for me. I used PETG, not sure how well PLA holds up.…
ПРИМЕЧАНИЕ!!! Изначально сзади модели был логотип молнии и значок сети, но из-за слишком маленького их масштаба они плохо получались на моём принтере. Было принято решение убрать эскизы с модели. Себе я отпечатал и не стал ничего менять.…
tried a couple of these putting targets I found and printed, but they all were hard to get on and off the chains so I made up one a little easier to get on and off while still staying on during putting practice.
Pin down to the putting green with a tee. It is half the diameter of a hole, so it makes you a better putter. Alignment arrows recessed into the top. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Doesn't Matter Supports:…
When you put the warp on an uncle loom you no more need to clip the thread with an extra clip and grab for the scizzors. Instead you just use the combines cutting/clamping ring. The blade for cutting is one piece of a cutter knife blade,…
Make a crazy golf course in the garden, the hall or the office: a putting hole with a flag (use a skewer or a pencil as the pole), a jump ramp with side rails and an arch gate to putt through. Fits a standard golf ball or any ball up to…
Introduction A simple ball-shaped target to serve as a visual reference for your putting practice. It clamps on a single link in the chains, and gives you a point to aim at. Will it fit? The target is designed to really fit around a…
A funnel that fits cleanly over the threads of a classic Moka pot, but lets you spoon coffee over the entire filter, keeping the mating threads clear of coffee grounds. 1 cup and 3 cup sizes, or use the customizer to make a custom one for…
Improve your golf putting game with an adjustable putting gate (50 - 70mm) that can be used on a practice green or carpeting. Holes in each side can be used with golf tees to secure to the ground or though carpeting. Usage Set width size…
A practice golf putting cup (ramp style) designed to give you a consistent, portable target so you can build a reliable putting stroke anywhere. Dimensions 32L cm x 26 W cm x 6 H cm Printing Tips FDM printer at 0.2mm layers and 10% infill…
I made this so i could practice the breaks i want to on the practice green. I didn't want a complete hole so it would take up less space in my bag. Easily secured with 2 standard size golf tees. The inner radius is the same as a standard…
Make your life easier with "Putter Buddy" featuring a quick connect putter grip attachment that makes it easier (no bending down) to retrieve your golf ball from the golf greens cup. This attachment consists of a retriever with line…