Wyniki wyszukiwania: qbrick

Sortowanie

102 modeli

P
PrintablesTom

Sortiment for Qbrick Systainer One 2.0 - Drawer 3.0 Ultra HD

Sortiment for QBrick ONE 2.0 DRAWER 3 TOOLBOX EXPERT RED Ultra HD Box Size : S , M , L , .…

Wydruk około 19,01 €–23,24 € nettoWstępna wycena jednego wariantu

Pobrania
257
Polubienia
83
Ocena
0
P
Printablesmajkjanu

Qbrick System PRO - desk adapter

The second piece of the adapter must be mirrored. The model is split for easier printing.

Pobrania
933
Polubienia
103
Ocena
5
P
PrintablesLišák

Qbrick buckets

I made this remix for more buckets variants, easy print without supports and filament save. I change thicknes of deviders for more space. I printed all models from PETG for better durability with 0.8 nozzle and 0.4 layer height. On the…

Pobrania
828
Polubienia
107
Ocena
5
P
PrintablesPetr Švejcar

Qbrick compartment

I made this spare compartment in more versions, because ⅓ partition you cannot buy. I'm also made this compartment little bit higher, for reduce gap between top cover and compartment. I will be glad if you leave a comment with the foto :)

Pobrania
660
Polubienia
78
Ocena
5
P
PrintablesKamil Drukuje

Qbrick Pro and One insert

I ran out of organizer inserts so I made my own. Have a nice used.

Pobrania
458
Polubienia
63
Ocena
5
P
Printablesaroo

AR QBRICK epic collection of bucket in bucket

Today, I present a gigantic set of buckets designed for the well-known and popular Qbrick system, though of course, it can be used for other purposes as well. I modeled the buckets to maximize the space inside the Qbrick organizers and…

Pobrania
446
Polubienia
78
Ocena
0
P
PrintablesMGyula

Qbrick System Pro adapter M8 and M6

A fully printed adapter to mount stuffs to the side of the Qbrick System Pro boxes. The original one is M8. The diameter is 13.1 mm if it not taut enough you can scale up a little or edit the Fusion modell. I suggest to use the M8 version…

Pobrania
356
Polubienia
43
Ocena
5
P
Printablesprintthisshit

Toughbuilt ClipTech Qbrick Inserts

Toughbuilt ClipTech mount for Qbrick System inserts

Pobrania
341
Polubienia
49
Ocena
5
P
Printablesmcko

QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs

QBRICK SYSTEM TWO INSERT angle grinder 125mm cutting sanding discs also for 200 cases and XL organisers

Pobrania
333
Polubienia
57
Ocena
5
P
PrintablesAlbert

Qbrick Parkside battery mount

Tested on Qbrick Pro boxes, but I think it will also work on others that have installed inserts. PetG or Asa recomended. Supports have already been added.

Pobrania
314
Polubienia
49
Ocena
5
P
PrintablesJan

Qbrick system TWO - compartments

This helps to divide compartmets in Qbrick system two organizer MULTI into smaller boxes. Original box (organizer) has three different sized compartments (see image below). For each compartment there is folder containing .stl files for…

Pobrania
313
Polubienia
58
Ocena
5
P
PrintablesElec11

Qbrick Hex Bit Organizer Trey/bin

Hex bit Trey for Qbrick Pro drawers or shallow organizers I split the model in Prusa slicer with the dovetail tool For me the bits have a slight loose fit so they will fall out when held upside down

Pobrania
307
Polubienia
38
Ocena
5
P
PrintablesDavid Stein

Dewalt to QBrick Pro adaptor

Adaptor to extend Dewalt Tstak to make it possible to lock on top of the QBrick Pro cases. Print two pieces, the version number should be on the bed and there is a need for support. If you can use the multilateral and separation filament…

Pobrania
299
Polubienia
38
Ocena
0
P
Printableskilar p

Adapter for attaching the worktop to the Qbricksystem PRO box

Tištěno z PETG trysky 0,4mm vrstva 0,2mm, 4 stěny, náplň 20%. V úzkém místě, kde jsou otvory pro zoubky klik z krabice, je dobré pomocí modifikátoru nastavit 100% vypnutí. @S adaptérem je třeba vytisknout 2 vložky pro umístění na krabici…

Pobrania
287
Polubienia
49
Ocena
5
P
PrintablesVojak

Qbrick - paper towel holder

The model includes only a holder - Qbrick connectors are needed for correct mounting in boxes. Fits two sizes of popular paper towels - small and large. It also fits two kinds of internal roller sizes.

Pobrania
281
Polubienia
46
Ocena
1
P
PrintablesKarol Cichoń

Qbrick Pro Compartments

Reimagine your Qbrick System with modular compartments to elevate your storage and organisation experience. Precision-engineered and built to integrate seamlessly into your Qbrick setup, these sturdy compartments bring style and…

Pobrania
274
Polubienia
55
Ocena
5
P
Printablesstefanovesca

QBrick System Pro Accessories

I needed more Qbrick containers and wasn't satisfied with the ones I found online. So, I decided to design my own, adding extra accessories as well. Stay tuned for more ready-to-print accessories! ##### 10/01/2024 - Added STL files and…

Pobrania
267
Polubienia
34
Ocena
0
P
Printablesmiko

Qbrick TWO Organizer Multi Trays

Qbrick System TWO Organizer Multi is great for bigger nails or screws but if you have lots of smaller items it may be difficult to grab them from the bottom and also a lot of space is wasted. These trays take two spaces, fit into both…

Pobrania
261
Polubienia
49
Ocena
5
P
Printableskilar p

Qbrick side mount for small boxes

Holder for mounting the Qbrick tool box into the insert for small boxes, Printed from PETG nozzle 0.4, layer 0.2, 3 perimeters infill 15% gydroid. I have attached the model in .f3d format for possible modifications.

Pobrania
254
Polubienia
43
Ocena
5
P
PrintablesQoTheGreat

Qbrick One desk mount

Plywood table mounting bracket

Pobrania
252
Polubienia
32
Ocena
0

Qbrick adapter / connector

Adapter to connect to qbrick system, it allows to connect flat piece to qbrick and use it for different purposes: As an

Pobrania
249
Polubienia
47
Ocena
5

Gridfinity base for QBRICK System Pro Drawer 2/3

Gridfinity Baseplate for QBRICK System PRO Drawer 2 and 3 ⚠ Choose the version you print! Drawer 3 and Drawer 2 bases aren't interchangeable. This custom Gridfinity baseplate is designed to match the internal contour of the QBRICK System…

Pobrania
245
Polubienia
59
Ocena
5
P
PrintablesLišák

Qbrick bucket for 1/4" ratchet

In the bucket is 13 posistions for comlete drive socket set (from 4 to 14) plus one position for reduction to ¼" hex bits. All drive sockets must be max. 25mm height. Drive sockets posistion is designed for holding in the possition by…

Pobrania
222
Polubienia
25
Ocena
5
P
PrintablesPa Ma

QBrick ONE / PRO Tray Inlay

Inlay for the QBrick ONE/PRO Tray to maximise your storage space. The inlay can be easily clipped into the QBrick tray.

Pobrania
215
Polubienia
27
Ocena
0
P
Printablesstefanovesca

Qbrick System Pro adapter for M6 Wurth rivet nut

Adapter to fit an M6 Wurth rivet nut into the lateral hole of the Qbrick System Pro.

Pobrania
204
Polubienia
28
Ocena
5
P
Printableskilar p

Qbrick Pro box spray holder

printed from PETG, nozzle 0.4mm; layer 0.2 mm; 3 walls; filling 15% gydroid

Pobrania
201
Polubienia
28
Ocena
4
P
Printableskilar p

výstelka na násadkové klíče (Gola)Honiton do boxu Qbrick system pro

Model je tištěný tryskou 0,4mm vrstvou 0,2mm 2 stěny a vyplnění 10% neni mechanicky namáhaný takže dle mého soudu bude stačit PLA

Pobrania
193
Polubienia
20
Ocena
0
P
Printableskilar p

Qbrick - mineral water holder 1.5l

Mineral water holder for Qbrick box by inserting it into the original connector. Printed from PETG material, nozzle 0.4mm, layer 0.2mm, infil 15% gydroid

Pobrania
190
Polubienia
24
Ocena
0
P
PrintablesRadek

QBrick ONE XL containers inserts

Set of containers. The naming convention is like “1x_*” - means the insert for the smallest container, “2x_*” - the double one. Then “double” or “triple” in the name means that the insert is divided into 2 or 3 separate spaces. The bit…

Pobrania
187
Polubienia
30
Ocena
0
P
PrintablesMarvin27

Adapter for QBRICK Organizer L & M

It is an adapter for QBRICK boxes, and more specifically the ONE system, and more precisely L and M organizers. With these adapters you can hang these organizers on the wall or any stable surface. You need to print 2 pcs right and 2 pcs…

Pobrania
186
Polubienia
34
Ocena
5
P
Printablesobdiy

QBRICK System two organizer blank

I want to make an organizer for my Qbrick big boxes without any walls for some big tools. It's just a blank box for you creative inserts) Print tips: main body can be printed diagonally at 220x220mm bed easily if you can make good…

Pobrania
175
Polubienia
32
Ocena
5
P
PrintablesTheFicktion

Qbrick toolbox clamp

Pins made from a nail expanded by a pen spring, which facilitates installation in the target location.

Pobrania
174
Polubienia
26
Ocena
0
P
PrintablesCosik

Qbrick parametric buckets

Here is an original design with parametrization…

Pobrania
174
Polubienia
28
Ocena
0
P
PrintablesLišák

Qbrick PRO Toolcase carbide disc holder

The height of the holder is designed for discs stable possition during transport. Holder is universal for all discs sizes. Tinkercad link: https://www.tinkercad.com/things/5ia4a3sgbZP

Pobrania
169
Polubienia
22
Ocena
5
P
Printableskilar p

Holder with Qbrick connector for energy drink

printed from PETG nozzle 0.4mm; layer 0.2mm; infill 15% gydroid. Suitable for drinks in metal cans 0.5L

Pobrania
150
Polubienia
13
Ocena
0
P
PrintablesQoTheGreat

Qbrick One Handle

Handle for Qbrick One 2.0 box with allteraint wheels. To assemble, you need 4xM8 screws and tube 28mm.

Pobrania
142
Polubienia
16
Ocena
0
P
Printablestopcio

Qbrick System Prime - adapter, workbench connector

Qbrick System Prime - adapter, workbench connector Adapters are used to connect any large plywood or other board material to Qbrick Prime System crates. The 3mf file comes from Qidi Studio. My printing suggestion: Walls: 6 Top and bottom…

Pobrania
131
Polubienia
16
Ocena
0
P
PrintablesDominikG

Qbrick bucket handler

I made this short handler for the Qbrick bucket for my Qbrick Toolbox 2.0 mounted on one of compartment.

Pobrania
129
Polubienia
14
Ocena
0
P
PrintablesMarvin27

Adapter for QBRICK Organizer L & M - Smaller Version

It is an adapter for QBRICK boxes, and more specifically the ONE system, and more precisely L and M organizers. With these adapters you can hang these organizers on the wall or any stable surface. You need to print 2 pcs right and 2 pcs…

Pobrania
125
Polubienia
22
Ocena
5
P
PrintablesAlex Gdreamer
Pobrania
120
Polubienia
27
Ocena
0
P
PrintablesAndrei Pascal

Additional compartmentalization for QBRICK Pro 300

I bought the QBRICK Pro 300 to better organize screws, bolts, and small accessories, but once it arrived, I realized that the available compartments were too large for the size of the pieces I use. I found some replacement trays on…

Pobrania
117
Polubienia
14
Ocena
0
P
PrintablesAlbert

Qbrick dewalt battery mount

Tested on Qbrick Pro boxes, but I think it will also work on others that have installed inserts. PetG or Asa recomended. Supports have already been added.

Pobrania
114
Polubienia
14
Ocena
0
P
PrintablesDavid Holecko

Qbrick horizontal separator

A connector for linking horizontal dividers in a Qbrick tool organizer, allowing you to create a long horizontal partit

Pobrania
112
Polubienia
17
Ocena
5
P
PrintablesLišák

Qbrick Pro Socket Organizer

Organizer for 1/2" socket to Qbrick Pro drawer. For complete set from 10 to 36

Pobrania
107
Polubienia
25
Ocena
5
P
Printablestopcio

Qbrick System Pro Insert - Container Spacer

Przegrody dostosowane do Qbrick System Pro Organizer 300. Nie wymagają kleju do montażu. Nie wymagają podpór do druku. Ustawienia podstawowe/domyślne. Ja jedynie zmieniłem na 3 ściany. PLA jest chyba wystarczający do tego celu. Wsuwają…

Pobrania
106
Polubienia
14
Ocena
0
P
Printableskilar p

coffee cup holder for Qbrick box

Holder printed with PETG for a classic coffee cup. nozzle 0.4, layer 0.2, 2 perimeters, 20% gydroid filling

Pobrania
104
Polubienia
14
Ocena
0
P
PrintablesQoTheGreat

Qbrick x Gridfinity 11x7 for Qbrick One 2.0 Drawer Toolbox

Big bed required 300x300mm Recomended bins height 09 (67mm) or less. https://www.printables.com/model/774585-light-gridfinity-bins-collection-with-magnet-only/files

Pobrania
104
Polubienia
23
Ocena
0
P
PrintablesLišák

Qbrick bucket holder

Bucket holder for Qbrick Custom Connector system

Pobrania
104
Polubienia
13
Ocena
5
P
PrintablesLišák

Toughbuilt/Qbrick holder

Toughbuilt system adaptor to Qbrick. Two versions - Custom connector insert and M8x20 allen screw mounted holder.

Pobrania
99
Polubienia
12
Ocena
0
P
PrintablesVaty79

qbrick pro insert with inlay

qbrick pro insert with inlay

Pobrania
97
Polubienia
18
Ocena
5
P
PrintablesChristian

Qbrick Toolbox to Skadis Board

This model allows you to mount a small IKEA Skadis pegboard onto the side of your Qbrick toolbox , creating a modular and flexible way to store tools and accessories. The setup uses two 3D-printed adapters that attach to your toolbox with…

Pobrania
92
Polubienia
22
Ocena
0
P
Printablestopcio

Qbrick System - folding chair hanger

Uchwyt pasuje do Qbrick System Pro 2.0, One 2.0, Prime i wykorzystuje oryginalne Qbrick connectors. Składany taboret występuje pod kilkoma markami, więc nie będę ich wymieniał. Potrzebne będą: oryginalne konektory Qbrick (te czarne…

Pobrania
90
Polubienia
14
Ocena
0
P
PrintablesPa Ma

QBrick ONE Tray Hook

Hook to fix tray into the QBrick ONE tool box.

Pobrania
90
Polubienia
17
Ocena
0
P
Printableskilar p

wrench holder for Qbrick Pro box

Wrench stand printed from PETG

Pobrania
83
Polubienia
19
Ocena
0
P
PrintablesFocker

A handle for Qbrick System PRO Technician Case 2.0 RED Ultra HD

You'll need Pin-6х35mm 2 pieces Bolt-M8x20 2 pieces

Pobrania
78
Polubienia
20
Ocena
0

Qbrick Connectors - Male part

Designed for Qbrick M8 threaded mounting system

Pobrania
72
Polubienia
4
Ocena
0
P
PrintablesLišák

Parkside/Qbrick battery holder

Parkside battery 20V holder for Qbrick system

Pobrania
68
Polubienia
13
Ocena
0
P
PrintablesEssiggurka

L-Boxx adapter for Qbrick Pro Toolbox system

I printed the final version in PETG with 25% gyroid infill. This adapter should be quite heavy duty, I calculated the gyroid infilled printed version with Prusament PETG to have a failure load of around 250 N per adapter, so 50kg of…

Pobrania
66
Polubienia
9
Ocena
0
P
PrintablesMichalJerzy

QBRICK box holder for IKEA SKADIS board.

QBRICK box holder for IKEA SKADIS board.

Pobrania
57
Polubienia
10
Ocena
0
P
PrintablesAlex Gdreamer

QBRICK System Pro 200 insert

Containers in the qbrick pro200 organizer Petg No supports

Pobrania
54
Polubienia
2
Ocena
5
P
PrintablesPetr

Qbrick gola Parkside

Insert to Qbrick drawer pro for gola Parkside

Pobrania
53
Polubienia
15
Ocena
0
P
Printablesventrue3000

Gridfinity baseplate for QBrick One Drawer

Designed for a QBrick One Drawer 3 Toolbox 2.0. Also fits my Drawer 2, albeit a bit tightly. Might be manufacturing tolerance. Compared to QoTheGreat's , it has half a row less on Y, but it's more economical to print, fits the MK4S bed…

Pobrania
51
Polubienia
8
Ocena
0
P
PrintablesRobgold

Qbrick Pro - Toolcase modification for Sonel MPI-50x

Qbrick System PRO Toolcase modification for Sonel Multifunctional Electrical Installations Meter MPI-50x Set: Multipropse box Earth resistance cables box Crococlips holders High Voltage probes holders Earth resistance rods holders…

Pobrania
51
Polubienia
20
Ocena
0
P
Printablestopcio

Qbrick System Tripod Holder

Potrzebny był mi uchwyt na statyw do skrzyń Qbrick System Pro, a oryginalny uchwyt do długich przedmiotów okazał się za wąski, więc zaprojektowałem ten zestaw. Wykorzystałem oryginalne konektory Qbrick (foto) te, których miałem najwięcej.…

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesWiro

qBrick one separator join

If you have to remove big vertical separators in drawer for space but want to keep horizontal for organization.

Pobrania
46
Polubienia
4
Ocena
0
P
PrintablesMateuszMiler

QBRICK case drill insert

Inert to carry drill, 2nd battery and accesories in qbrick case designed for QUBRICK - organizer / system ONE 2.0 M PLUS Metabo 12v grill / Power Max PetG recomended but PLA should Work fine I insert foam in the buttom

Pobrania
46
Polubienia
15
Ocena
0
P
Printableskitor

Qbrick Pro - Custom tool box mod for taller tools (up to 25cm tall)

Story time I'm using Qbrick Pro system to hold all of my tools and stuff in my workshop. I was slightly annoyed that Pro system doesn't have anything higher than Toolbox (except Cart which is annoying to put on a shelf). Toolbox can…

Pobrania
44
Polubienia
18
Ocena
0
P
Printablestopcio

Qbrick System - 10mm 12mm TPU workbench corners

Qbrick System - 10mm and 12mm plywood workbench corners. The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue. I printed them with TPU to make them soft. The 3mf file is from Qidi…

Pobrania
40
Polubienia
8
Ocena
0
P
PrintablesBlack

QBRICK SYSTEM PRO DRAWER - organizer

Now released my custom organiser In the future, I will release a STEP file with basic drawer-filling for your custom organizer.

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesNoLu

Bosch gluey tray for qbrick

Tray for Bosch Gluey to qbrick drawer.

Pobrania
37
Polubienia
7
Ocena
0
P
Printablesdrsan

Qbrick system one drawer lock

Qbrick system one drawer lock. Одна часть замка ящика Qbrick system one.

Pobrania
35
Polubienia
7
Ocena
0
P
Printableskilar p

Qbrick Pro wall mount

Qbrick Pro holder suitable for wall mounting for hanging the cabinet. Best printed from PETG 4 perimeters 100% infill

Pobrania
34
Polubienia
4
Ocena
0
P
PrintablesLuboš Slezák

Brother PT-H110 insert for Qbrick

Insert for Qbrick System PRO Organizer Multi 16470 and Brother PT-H110 Label Maker, integrated holder for 6xAAA batteries and room for spare tape.

Pobrania
34
Polubienia
13
Ocena
0
P
PrintablesMichal Kumhera

Přepážka Qbrick 100,200

Pro max. pevnost je třeba přepážku vlepit nebo přišroubovat. Like potesi dekuji.

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesFluffy's DIY

Qbrick sustem PRO 600 Basic Organizer

Organizer for tool box Qbrick sustem PRO 600 Basic

Pobrania
27
Polubienia
8
Ocena
5

Qbrick connectors - Can holder

Custom can holder for Qbrick system custom connectors. Designed for Qbrick M8 threaded mounting system

Pobrania
27
Polubienia
2
Ocena
0

Qbrick connectors - tool holder for Belt Hook/Clip

Let me know what other accessories for Qbrick connectors you need :) Designed for Qbrick M8 threaded mounting system

Pobrania
25
Polubienia
1
Ocena
0
P
PrintablesLBENEGAS

QBRICK SYSTEM 2 FRONT SIGNS

I like to have my toolboxes labelled to quickly know what is inside them. These signs/tags are for the QBRICK SYSTEM 2 toolboxes. The “base” of the tag have 2 words subsided/recessed (so to later print those words in different colors - I…

Pobrania
24
Polubienia
10
Ocena
5
P
PrintablesProVERCAJK

Qbrick adapter 1.0 -> 2.0

Možnost osazení na boxy 1.0 (bez otvorů pro závitové vložky) pro použití s CUSTOM adaptéry. Testováno na boxech PRO

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesRobatzen

Qbrick System One Drawer - Vertical Drawer Divider

Pick the matching file for your drawer config. The regular version fits the " Qbrick System One Drawer 3 " toolbox, while the tall version is made for the Drawer 2 toolbox (the one with two equal sized drawers)

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesPaJa-trb

QBRICK - silikon

šířka 53mm, výška 60mm vnitřní průměr 49mm 2x M3 10mm 2x M3 matka šestihran Na QBRICK lze umístit 2 držáky vedle sebe. Pomocí šablony (obr. zelená) vyvrtat 2 díry 3mm a zevnitř přišroubovat na pořadač.

Pobrania
21
Polubienia
3
Ocena
0
P
Printablesabdulkhaliq

qbrick bosch GAL 18V-40 adapter

bosch GAL 18V-40 charger mount adapter for qbrick prime toolbox I use https://www.thingiverse.com/thing:6102493

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesRobatzen

Qbrick System One Drawer - Horizontal Separator - Tall Version

Same idea as the original model. But in a taller version which works for the Qbrick System One Drawer 2 Toolbox.

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesProVERCAJK

Qbrick handle stop / zarážka rukojeti

Náhradní díl pro dvojitou rukojeť Qbrick Cart

Pobrania
13
Polubienia
0
Ocena
0
Pobrania
5
Polubienia
0
Ocena
0

Qbrick Connectors Ikea Tertial Lamp Mount

You can move your lamp with qbrick cases - even setup workspace if needed :) Simple print, no supports needed. See my other Qbrick projects:

Pobrania
4
Polubienia
1
Ocena
0

Qbrick Connectors T hook for rope / cable

Simple project to have additional mounting for your cables / ropes. No supports needed

Pobrania
2
Polubienia
0
Ocena
0

Qbrick connectors - bucket / tray single mount

See my other qbrick related projects:

Pobrania
2
Polubienia
0
Ocena
0

Qbrick Connectors - triple Makita battery holder

I made it simle - no lock mechanism as i don't expect it to be needed; See my other qbrick related projects:

Pobrania
2
Polubienia
1
Ocena
0

Qbrick Connectors - Makita battery single holder - no supports needed

I made it simle - no lock mechanism as i don't expect it to be needed; See my other qbrick related projects:

Pobrania
0
Polubienia
0
Ocena
0

Qbrick connectors wall mount

See my other qbrick related projects:

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Qbrick toolbox clamp

Pins made from a nail expanded by a pen spring, which facilitates installation in the target location.

P
Printables

Qbrick System - folding chair hanger

Uchwyt pasuje do Qbrick System Pro 2.0, One 2.0, Prime i wykorzystuje oryginalne Qbrick connectors. Składany taboret występuje pod kilkoma markami, więc nie będę ich wymieniał. Potrzebne będą: oryginalne konektory Qbrick (te czarne…

P
Printables

Parkside/Qbrick battery holder

Parkside battery 20V holder for Qbrick system

P
Printables

qbrick bosch GAL 18V-40 adapter

bosch GAL 18V-40 charger mount adapter for qbrick prime toolbox I use https://www.thingiverse.com/thing:6102493

P
Printables

Qbrick System - 10mm 12mm TPU workbench corners

Qbrick System - 10mm and 12mm plywood workbench corners. The corners are designed for 10mm and 12mm plywood. They are mounted with good double-sided tape or glue. I printed them with TPU to make them soft. The 3mf file is from Qidi…

P
Printables

Qbrick gola Parkside

Insert to Qbrick drawer pro for gola Parkside

P
Printables

Qbrick System Prime - adapter, workbench connector

Qbrick System Prime - adapter, workbench connector Adapters are used to connect any large plywood or other board material to Qbrick Prime System crates. The 3mf file comes from Qidi Studio. My printing suggestion: Walls: 6 Top and bottom…

P
Printables

Qbrick handle stop / zarážka rukojeti

Náhradní díl pro dvojitou rukojeť Qbrick Cart