Flexible Train Track / Rails for Wooden trains
Bendy train track for non-standard curves
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1525
- Polubienia
- 219
- Ocena
- 5
271 modeli
Bendy train track for non-standard curves
Wydruk około 6,15 €–7,52 € nettoWstępna wycena jednego wariantu
Turntable for wooden train tracks. It consists of a basic element into which a small turntable is inserted. The parts are connected by a screw and nut of M3 type with a length of 12 mm.
Wydruk około 1,86 €–2,27 € nettoWstępna wycena jednego wariantu
Support me :: Please consider donating any amount as you see suitable to help me create more content and keep sharing it for free. Info :: This was a request from Koppa to (re-)create a model of the Mosby stasjon in Norway. We give this…
Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu
A support for the Ikea/Brio type train bridge. It will fit slightly larger than typical trains. If you like this model check out this collection of my other toy train models.
Wydruk około 6,25 €–7,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The track is compatible with wooden rails. It is also possible to connect the individual printed tracks to each other.
Wydruk około 2,46 €–3,01 € nettoWstępna wycena jednego wariantu
A shipping container that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. If you like this model check out this collection of my other toy train models.
Wydruk około 1,05 €–1,29 € nettoWstępna wycena jednego wariantu
This simple wall sign can be used to point the way to your model train room or just be decorative. Printed at .20mm Quality. There is a color change at .80.
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
In my two new floor level showers no strainers were installed in the drain gutters, so long hairs etc. periodically clogging the drain. The cleaning of the drain ist really no fun... The official strainer (google "Tece Haarsieb Drainline…
Wydruk około 0,70 €–0,85 € nettoWstępna wycena jednego wariantu
Show off your love of garden railroads by making this sign of the LGB model train company. Multi-layers make for easy filament changes.
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
A gas tank that will fit on Brio, Ikea, etc train cars. An M5 bolt goes in the hole in the top so it can be lifted with magnetic cranes and the like. The included gcode prints in two colors, one for the base, one for the tank. No supports…
Wydruk około 1,07 €–1,31 € nettoWstępna wycena jednego wariantu
Intro There is no turntable available from brands like Lego or Matel for the Duplo sized trains… I designed one myself using FreeCAD. My Ender 3 S1 isn't capable to print the base plate in one piece - therefore I split it into 6 segments:…
Wydruk około 0,32 €–0,40 € nettoWstępna wycena jednego wariantu
H0 1:87 Lantern for Trainstation Platform, Eisenbahnstation Bahnsteig. You can connect two platform elements with the connector and build a longer platform. You get four versions created for the C-Gleis of Märklin: 1026mm FR like high…
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
Propeller spinner cap for popular RC aircraft Volantex TrainStar in equal scale with side bolts mounting. No supports needed. For 6mm shaft Equal scale If you like it, please support me: Paypal: [email protected] Skrill:…
Wydruk około 0,79 €–0,97 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I had some toy trains lying around, but no tracks, so I designed some simple ones. It should be noted, that the dimensions of these tracks were designed to work with my specific trains, I don't think they are "universal" and will work…
Wydruk około 5,31 €–6,48 € nettoWstępna wycena jednego wariantu
See also the new version with air vents . As I didn't really liked the original housing of the CV-Programmer by mXion, I just created an alternative. To prevent the electronic board from moving inside, I suggest to add a small…
Wydruk około 1,68 €–2,06 € nettoWstępna wycena jednego wariantu
Die Handbrause tropfte ständig und zum Schluss konnten keine einzelnen Brausestufen mehr ausgewählt werden. Nach dem Öffnen der Handbrause habe ich gesehen, dass eine kleine Führung abgenutzt war. Als Material habe ich ASA von Prusa…
Wydruk około 2,97 €–3,62 € nettoWstępna wycena jednego wariantu
Diesel depot for model trains H0 1:87 This is based on an actual railroad wagon from “L'Alliance Society An Anvers” dated 1926. I only had 1 picture to go by. The idea is they took the top of the wagon to make the depot tank. Pictures are…
spare parts for LGB model train couplings LGB model train spare parts can be quite expensive, especially if you want to build your own waggons and need a lot of them. I redesigned the original coupling mechanism, including a softer and a…
Stackable tower for Brio/Ikea wooden train sets. Printed in PLA with 0.6mm nozzle. 2 walls and 40% infill.
A generic “gooseneck” style chassis for the USA Trains 40' shipping container. I use 2.5mm/ 3/32 inch steel rod for the axles. Landing gear can be positioned up or down with a bit of 2mm rod. NOTE: I PUT MUCH TIME AND EFFORT INTO DRAWING…
My test track is only 10 ft so I decided to make a set of rollers to test locomotives. You will need: Standard 608 8x22x7 “skateboard” bearings If you want to draw power from the track, a bit of 1/32” x 1/8” brass strip stock bent like an…
A 60 degree connector for LEGO train tracks (not DUPLO). Updated with a fixed .STL (this was one of my first designs and there were some small overhangs I hadn't noticed). No supports needed, but there are small ones built in at the end…
3 different types of train wagon for Ticket to Ride (boardgame), optimized for 3D printing.
🇦🇺 Welcome to Sydney! The Trains of the World Collection will feature some of the most iconic railways, from cities such as Paris, Tokyo, New York, London, Mexico City, Melbourne, Seoul, and more! This entry contains parts for assembling…
Gwr first classs coach collet coach carriage wagon model railway model trains
A small gantry crane for loading Brio/Ikea compatible trucks and trains. A 9mm x3mm round magnet is required, a small quantity of glue, as well as 8 M3 screws. Also feel free to check out my other train related items: Swerving Track for…
When you have enough bricks around to build lego trains attachment car, but no spare couplers, buffers and wheels - and all stores are actualy closed due to holiday season :-)… Print settings Modelled according to actual lego pieces and…
A small boom crane for Brio, Ikea, or other wooden trains. It is based around a standard 150mm section of straight track. Hardware required for assembly: 3x M3 screws ( I used 6mm, 15mm, and 20mm, but the lengths required are fairly…
This is a replacement coupling hook&spring for Playmobil wagons. Printed in ABS the spring is stiffer than the original Playmobil piece, but that also means the wagons are less likely to accidently uncouple. The uncouple-lever was left…
I have a starter Bachmann train set with a 36" circle track and I don't have room to make a bigger scene, so I need a curved bridge. I specifically called this “for HO trains” and not “HO scale” because it's not to scale of anything, but…
This is a double height trestle for Brio type trains, with a a connection at standard and double high bridge heights. This model prints without supports, but it does require some bridging. I would also recommend a brim to ensure a…
Remix of the following designs: https://www.printables.com/model/255855-brio-compatible-standard-h-cross-track by @PrintATrain https://www.printables.com/model/329413-brio-wooden-train-tunnel by @Daniel_5163…
This model is a small landscape where you can create a small train oval with all the accessories. Feel free to get the inspiration on our article on PrusaPrinters blog. Print instructions Model has to be split in parts as it is scaled for…
A rainshower head with a 35 degree (after sag) mounting arm
Originally All LEGO® like train track rail in L-Gauge by Bryan Remixed by author into L-Guage Rails to Fit Lego Trains I reduxed my remix in TinkerCAD ( link ) to achieve the following: Remove top nodules. Mine didn't fit Lego pieces…
A simple dog-bone (male-male) connector for Thomas- and Brio-compatible wooden train track. This renders in "solid" and "spring" variations. The spring version is the original design but the now-default solid version looks better and…
Swedish plattform or ramp built with stones. I suggest that you put som fine grits on the ramp to illustarat a older look.
I have a seasonal HO-scale layout that I set up for the winter months and take down for the rest of the year, which is why I really enjoy the snap-together track. I also have a bunch of traditional track that a neighbor was throwing out.…
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
Flared radiator section for USA Trains SD70MAC. This is style found on the later units with 4,300 horsepower. No body modification needed as this will slip over the existing air intake louvers however in order for this to sit flush, you…
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
More modern style "trapezoid" bell replacement for the stock Howard bell. Print Settings Printer Brand: Printrbot Printer: Printrbot Simple Metal Rafts: No Supports: No Resolution: .1
This is a 1/2 standard height bridge for wooden/Brio trains. It can be printed on a Prusa Mini sized print bed and is a gradual enough slope that the trains shouldn't bottom out. Using the included piers, these can be paired to make a…
This little bridge will let your trains cross tiny imaginary rivers. Depending on your bridging and overhang capabilities, some supports may be required. If you have a small printer like a Prusa Mini+, the bridge will fit on the print bed…
Single Oral B Stand With 2mm Drains No supports and no errors in Prusa Slicer! Size: X66mm Y66mm Z18mm
Version 1 of 2 for my brainsucker bust, version 2 found here with a large tentacle instead of a stitch towards the back of the head. Comes in 2 sizes and is pre-supported. For more sculpts like this, check out my twitter for new models…
A A5 Plexiglass window (1,5mm thick) can be slid in as a window. How I Designed This https://cad.onshape.com/documents/fffc543bf24b6844ffa78476/w/180341e40870f55bcf48e4e3/e/7d8f8327e766ca58413accac Category: Decor
A friend asked if I could make a few of these for his scale train layout. He brought me a broken one and I modeled this replacement, I printed a few and they were happy with them. It looks like it"s one of these -…
Blank Pilot and Plow pilot for USA Trains EMD SW2. Versions for Large scale and #1 couplers. Print Settings Rafts: No Supports: Yes Resolution: .1 Infill: 100
A working gantry crane that can be used to move brio style magnetic containers. A box with two parts that slides on the beans. I could not print this as a single piece so ended up splitting it and glued it with superglue. Extra things…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Alternative replacement Grille for the USA Trains SD40-2 locomotive. These are the welded wire cage style with the 2 most common mesh "inserts". SLA Print. Print Settings Printer: Elegoo Mars Rafts: No Supports: Yes Resolution: 0.05…
Display for those trains you always planned to create a model rail road for, but never had the space, time, money e.t.c. Put them on display :) Designed for 3 layers, but should not be hard to extend to more. The project started with two…
This is a small square viaduct section built to be wall mounted. This goes with the brackets and other components my printed viaduct system. The support brackets for this are located here:…
To simulate EMD Flexicoil 2 axle trucks. These are not sprung. The springs are printed for a more prototypical look. I highly recommend getting them printed in MJF Nylon 12 for greater durability. I use JawsTec https://www.jawstec.com/
Depot for wooden trains with rolling doors.
My second approach for an easy to use and rarely to clean strainer for floor level shower drains. This time I replaced the original tube ("TECE Tauchrohr" see pictures) by an own designed one.The new tube is for the siphon-function in…
Nem tension lock coupler for oo gauge model trains Hornby bachmann
Do you like trains, but the scale models ones cost too much? Have no fear. You can now 3D print your very own Sydney Trains K set in HO scale! IMPORTANT NOTE: I designed this as a display model with a decreased part count, as a result,…
Masking jig for painting the faces of large scale metal wheelsets. Print with flexible filament. Fits 31mm Aristocraft, Bachmann, etc. Filament: Makergeek Maker flex
There are a ton of jockey pulleys here on Thingiverse, but most of them are the older 11t design. I recently managed to smash up two SRAM jockey pulleys (no idea how, the derailleur was fine) and I found out that replacement pulleys were…
Parts to represent the late production (Tier-1 emissions) SD70MAC Locos that EMD built for CSX and Alaska RR. Also could be used for the Metra SD70MACH. NOTE: For proper fit cutting away at the lower radiator grill on the model is needed.
This is a variable turning train for wooden trains and rails. This part is compatible with Ikea wooden rail, Lidl playti
Join to Unlock All STL Files FOR FREE: https://starforgekits.com/ StarForge Kits is the largest producer of STL files for 3D printing. We specialize in true-to-scale models, especially in 28mm. All models are correctly scaled and easy to…
This Brio and Ikea compatible reversable piece of track swerves one track width to the side. I have included two lengths. The 150mm (6 inch) piece is about as short as it can be while still having the curves be gradual enough to allow…
Have since remixed this project further into Redux set . Remix of the already excellent All LEGO® like train track rail in L-Gauge by Bryan . I remixed in TinkerCAD by filling in the bases of the standard straight and bend tracks. This…
IMPORTANT: Print in PETG, and the Octa Pipe standing with supports for better thread results. (screenshots/gcode for prusa mini) Thanks to @PrimeSenator_71493 for the original
N scale storm drains for use with .040" tall styrene sidewalks. Category: Hobby
A turnout viaduct for my N-Scale train viaduct system. This goes with the brackets and other components my printed viaduct system. This turnout accommodates 4 mainline tracks with Kato's track system and allows for offramps from the…
This adapter facilitates the use of a Kadee 907 coupler on USA Trains Extended Vision and Bay Window Cabooses. No modification to the frame needed. Uses the existing screw holes (using longer screws).
I lengthened the existing sideframe to fit a USA Trains R22-115 motor block. I also removed the plastic springs and added receptacles for real springs.
This is a splitting viaduct section built to be wall mounted. This goes with the brackets and other components my printed viaduct system. The support brackets for this are located here:…
These are track buffer stops (track ends) in male and female versions. They should be compatible with Brio, IKEA Lillabo, Lidl Playtive wood trains. Print Settings Printer: Bambulab A1 Mini Rafts: No Supports: No Resolution: 0.2 Infill:…
Yes, I know this doesn't exist. But it's MY railway and I'll do what I want! I designed this flared radiator shroud to fit over the body of a USA Trains GP38-2 without permanent modification. You will need to pop out the existing air…
Hood mounted air reservoirs for USA Trains 1:29 scale NW2 locomotive. The tanks are 16mm polystyrene test tubes. I measured 100mm from the open end and cut off the bottom. There is a bit of a taper hence the 2 different sized caps and…
A simple curved bridge over a mountain compatible with brio trains. It was printed with a 3% gyroid infill. A support must be used for the tab that sticks out. The overhangs under the bridge should not need supports.
Use these covers to convert the USA Trains SD70 “floppy” motor block to a solid one. Recommend minimum 10' diameter curves.
This plow directly replaces the Pilot on a USA Trains F3 locomotive. Unscrew the old one and screw on the new one.
litofania de goku ultrainstinto
Introducing the infamous Grumpy Cloud, who always seems to bring the rain with him! Watch the video above to experience the soothing sound of the rainstick in action. To create a non-stop rainstorm, simply rotate the rainstick in this…
A rather simple adapter for the nice Pi4 Case by Squirrelbrain. No additional Hardware needed. If needed, scalle up a percent or two. Part orientation should be ideal from the download.
This insert is designed to fit into the Ashes Reborn: Rise of the Phoenixborns Master Set box. Space has been reserved for the Chimera board from Red Rains: The Corpse of Viros and the three manuals. This insert supports sleeved cards,…
It was surprising how much I struggled with this one. What made the brainsucker more difficult than I thought was the Cthulhu-like tentacles on its face. On the creature in game, they would have been way too thin to print properly, even…
This is a very simple, easy to print instrument. You can print as many main elements as you want, than connect them with “konektor” and close with “kapsel on both ends. Please remember to add some rice or dried peas or… something like…
With this simple adapter you can use USA Trains knuckle couplers on LGB 50’ flatcars. I fixed the adapter with some glue. To be honest: a test with the car at the beginning of a long train is outstanding. Please note: this design will…
Use these stack-able bridge supports to make bridges, of any height, for your wooden trains. They are compatible with Brio, Ikea, and most of brands of wooden trains. The track piece prints easily without supports. The legs should be…
The gear is intended to be friction-fitted onto the main drive axis, so the central hole is slightly undersized and needs to be carefully drilled out with a drill slightly smaller than the axis diameter. Please feel free to adapt to other…
Sealed antennas like those found on the Alaska SD70MAC locomotives.
Convert a USA Trains GP&/9 to a GP7B/GP9B JTT products 97457 O Scale Tread Plate is a near perfect match. The porthole windows have a recess inside to accommodate the width of a standard Microscope slide or a (22mx22m) slip if you don't…
A Kadee coupler mounting solution for the USA Trains SD70MAC. I've provided a template to aid in cutting the notch necessary in the pilot. Uses Kadee #907
This is a bobble head (bobble-brain) Frankenstein Monster action figure. This toy use a 3D printed spring that supports the brain and makes it bobble. No supports are required and you can use minimal infill (10% is fine). The brain…
An upgraded SD40 tank, with more prototypical profile. There is no provision for a speaker in this tank. This tank mounts to the chassis the same way the stock unit does. The details are simple, like the stock tank.
Direct replacement for the stock part.
This is a larger fuel tank to replace the one on the USA Trains GP7/GP9 with rooftop "torpedo tube" air reservoirs, The air tanks were moved to the roof to accommodate larger fuel and water tanks on the prototype. Space for commonly used…
Winterization hatch found on the SD70MAC Tier 1 HEP locos built for the Alaska Railroad. Requires the flared radiator modification https://www.printables.com/model/653905-late-production-flared-radiators-for-the-usa-train You will also…
modified version of another model that was made for wooden track.
This is a box insert for Isle of Trains: All Aboard designed to keep all the components organised in the box and make setup faster. I remixed majino's insert to modify it in a few ways: The victory point tokens are now stored in their own…
This is designed to fit USA Trains motor blocks (#R22-115) to replace bad blocks on an Aristo-Craft GP40. Should fit Aristo FA, FB. RS3 and U25b as well (If you don't mind the EMD trucks).
This draw bridge (otherwise known as a bascule bridge or lift bridge) goes up and down with gates and is compatible with Brio, Ikea, and other wooden train sets. Multiple versions are available. The standard height version matches the…
This adapter is made to be used with the replacement covers for the SD70 motor blocks. Allows re-use of the Aristo-Craft GE side frames. No need to cut the axles short as they line up with the large holes in the side frames.