208 modeli
Y Axis remake for use with bearing mount All parts are based on original Prusa i3 MK2 design. Print instructions y idler requires support. y corners have support build into design. BOM: 4x LM8UU M3 nuts and bolts
I like the simplicity of the original model. But it has closed clamps. So I designed one with open / flexible clamps.
For use with Improved MK4 Fan Door (621424)
This is a remake of a case for the Flipper Zero, but modifying a piece to allow the wi-fi module to be carried along as well.
F-35 Lightning (Remake 2.0). Model fixed upon suggestion.
This new model, just as the previous one, requires absolutely no supports (just a good filament and nice cooling)! After my original raven model was so well received i decided to perfect it a little. I didn't like how the feathers on the…
Original Post: 3d scanned by User @AgainstYou (Hans Peter). I thought It was super cool and wanted to make a big ones, but the resolution was too low. After loading it into Fusion360, I re-meshed the model and fixed some of the geometry.…
Check the difference section at the bottom for feature list! I really liked the original model. Thanks FreddyZ! I started just wanting to make it easier to print, but feature creep got to me. But the result is good, and it was a good…
My wife thought the stormtrooper was pretty cool, and I am no painter. I didn't want to paint the stormtrooper head or the body, and figured since I had a new fancy pants Prusa XL that can do two colors, I would boot up Fusion and see…
Original print was flawed. I stitched the pieces together; since there were numerous complaints about the sections were not square and internal support structure pin was irregular. I made this one piece body and reused existing stabilizer…
Modified the original M9 models to resemble the Samurai Edge pistols from the Resident Evil games
This is a multicolor only evil version of R2D2 R2Q5! Prints with supports on any multicolor printer colors are red, silver, and black! THIS IS THE SEQUAL TO R2D2 KIT CARD!
This is only a remix insofar as reusing the measurements from the STL mesh. I finished remixing the STL but figured a new model would mean better adjustability. Added a lip for the cart holder Added a divot so you can press the cart to…
I re-made JBE's remix of the original connector by Phil-ip with the following improvements: Regenerated from original model without using re-meshing, avoiding geometry noise. Added internal taper to lower part of M10 thread, eliminating…
Millenium Falcon Pack, HD remake for Star Wars Armada. Designed for resin 3D printers, for best result print at 0.02mm no AA. If you like my work and want to support me you can visit my Etsy shop: https://www.etsy.com/shop/OnilCreations…
Printed in PETG. 150mm/s. 235 degrees c. No supports or bed adhesion.
Second knife of the resident evil series i really wanted to make (i may just go ahead and make a bunch more) This time around i used some different tools from fusion 360 to make the bevels of the blade to keep the shape as authentic to…
being a RE4 and RE4 remake fan, i really appreciated they inculded the original's knife as an unlockable in the game i also took the opportunity to practice knurling on a non-cylindrical shape, for the handle speaking of which, included a…
This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the front, since it cooled the tip of my hotend so much to clog the extrusion. This way the air is forced in a more downward…
2025-01-26 UPDATE: I received a request to make one without the heated steering button so I added it to the 3MF and I created a new set for RHD vehicles, so there is a new RHD 3MF file, as well as the RHD STL files. 2025-01-25 ADDED A…
A redesign of the internals of the HP Elite/Pro Desk SSF G2 for more HDD space rather than using external drives. Requires removal of plastic holders for current caddy, which are easily removed with a small flat head screwdriver.…
This is my first attempt at making a poseable action figure starting from an xps file and ending up with a printable stl. I am a big fan of the Resident Evil series and I decided to make this just after Resident Evil 2 remake was…
I am making the Elucidator and I saw this and was like "a metal rod ?!?!?!?!" so here is a 100% 3d printable version using pegs and glue AND THE CORRECT SIZE! Overall Length: 42.25 Inches Blade Length: 30.25 Inches. Here is the Og…
Rufus Shinra's Coins used in his Bright Lights attack while fighting Cloud. Printed in resin on an Elegoo Saturn.
hello there. this new version of fishing lure. have fun
I really liked the original design, but wanted to change some things. The shapes of the insects are copied from the original and these are the changes I've made. Please post a make if you end up printing these files, thank you. Changes:…
As the original knife was not easily printable, I decided to cut it into two halfs. I created two holes into the halfs to have these adjustable with two connectors. If you glue these together they will smoothly fit and you are going to…
Ginger Bread House Remake for MMU2s. Original by Nakozen is here: https://www.thingiverse.com/thing:4689896.
Infill: %10 Printed with supports - normal type Gold colour PLA Premium by Turkish brand Porima was used on mine
The STLs includes: Case Top, Case Bottom and Buttons. Make sure to print 3 of the buttons. Also, you will want to add supports to the top of the VGA cutout and the USB port beside the SD card cutout. Please see photos for details. To…
I have here the Extendet Remake again Remake'd
I downloaded this print...https://www.thingiverse.com/thing:2657972 and was blown away by how accurately it fit my Linksys Velop, but quickly realized that it was going to fail if I used the small holes provided…so I beefed it up a little.
This is a modified version for the very common light bar used on Flashforge AD5M and AD5X printers. Includes a secondary cut-out so that desoldering will not be necessary. Also lengthened the ends to allow the 230mm long light bar to fit.…
Original Front was to short for me so i had a 7-8mm gap, and Remake for adding adjustable rollers with 608zz ball bearings. dimension for ball bearings: - outer diameter 22mm - inner diameter 8mm - thickness 7mm
Edit 21-11-2019 - 20:25: Replaced with V3 in which some faces have been fixed so they are combined by using new lofts and an unknown floating edge preventing a single front face has been removed. I really love this iPhone dock made my…
A cool Replica. With great Software solution. Thanks For more information see the "Smart Nanoleaf Replica" Print instructions I made the leafs higher, so the light can get more diffus. So it is a remake of the hardware, the software is…
I would like to print the cable chain from Simin03 for my N4Pro, but I don't like the z-mount with all “Elegoo” print on allside, so I remake the z-mount from scratch based on official Elegoo Tool Holder. I use my remake z-mount .step…
These are a new neck and ring for the original ocarina to give it the look of the one seen in the new remake
A redesign of @IceCube Sol. “ Prusa CORE ONE/MK4 Honeycomb Fan Grill Cover (EASY INSTALL) ” where I created a modifier part along with the new design of the fan cover that is now snap on using the existing screw heads and the existing…
Remake to make the cookie cutter faster to print and easier to clean (savings of 12 minutes print time at 0.25mm draft on Prusa MINI as well as much easier to clean dough out of). I'm including the OBJ/step files for the body that I…
Full scale model inspired by the hockey mask strap connector from Friday the 13th 2009. The model may need supports for SLA/FDM 3D printing! Dimensions: X 2.25144 inches Y 1.62577 inches Z 0.195313 inches FOR PERSONAL USE ONLY. IF YOU…
Thanks to @VisualReversal for this great solution. I needed to reduce the length of the left waste bin, from 170mm to 160mm because of my webcam installation. As the org. stl-files (via 3mf) had only textured walls I imprinted a light hex…
use supports but just on the overhang of the rock on the rock the frog doesnt require any. i used 15% infil and coloured it on the bambulabs slicer to make it look fantastic.
I started a quick remake of this excellent design by dutchmogul only because having facets on a round object is a pet peeve of mine. Then, I thought, while I am at it I might as well make it print better without supports. So I made the…
It's a pretty loose fit so don't think much printers will have problems, but print the test rings just in case. The bottom of the egg might print rough. Used tree supports for the overhang for the inside lip. The top part inside the egg…
Giganotosaurus carolinii was one of the largest meat-eating dinosaurs , possibly even bigger than T. rex, but it had a lighter, more slender skull , built for speed rather than crushing power. Sculpted in blender, the model is divided…
I made a quick remix on Evan's design to work directly with the "JJC Slide and Film Remake" light that can be bought here at Amazon
Thanks @Janne for your design ! I love it, but it felt a bit inconvenient starting at the first layer with the numbers, because they messed my bottom layer up… So here ist my remixed version. One solid file. Easy to paint in your slicer…
Added the Empire of the First Galactic Empire logo to a round base and also a front display, just a heads up, the display corners are a bit sharp. I put some rubber feet on mine to stop from sliding on my desk. There are alot of color…
Upgrade your CCr Special Edition to an LE with this train track mod! I added wood grain pattern to the railroad ties for a rustic effect. Prints and paints easily. Printing & Assembly: Printed at 30% infill and supports enabled (for…
This is all based on the original toilet paper holder from vvk187: https://www.thingiverse.com/thing:1996077 That said, I actually used all the STLs from pugwash, as I liked the design with the hands that are retained and the solid and…
As I still had a couple of linear rails and guides from other projects as leftovers, I re-resigned this part of the press. Made some dimensions more “open” for more userfriendly assembly in case your printer does not highest quality in…
used photo of original hook as canvas, look to RMTB for original files, i will remade thread too, probably, as original snaps when overtighten edit: just uploaded remake of thread insert, rotate hole toward hotplate in slicer, it was…
This is a remake of the M1126 IVC. I opened the slats, they are see through now..
Skadis holder for Wera Kraftform Screwdrivers Remake with slightly less tight fit. Original designer is koldo19
isnt my model using it because other wont work
UPDATE 10/07/24: STL version now available after being on my Patreon forever. The Competition Pro is a legendary joystick from the early 80s created by Kempston Micro Electronics, the same company that produced the Kempston interface for…
Hecho con 3D Builder, Utilizando como referencia el modelo original Recomiendo para los pines los del modelo original y para el del seguro utilizar un trozo del propio Filamento ya que dará una mejor resistencia
I originally found the model here on Printables ( link to original model ), and I want to start by giving a big thank you to the creator for the great work! 🙏 I've made a small tweak/improvement that helped in my own setup – maybe it can…
Remake of my first ever CAD designed blaster: the DC15 “EX” or “experimental” hybrid rifle as seen in the temple march in Revenge of the Sith, this time using my recent DC15A rifle as the basis which hopefully makes it more accurate and…
This is my remake of Bugman_140's rudolph on which i added hook 😃 . Happy Holidays! If you wish you can donate on my ko-fi page .
Modification of the logo from the game. Can be used as a wall decoration
I wanted a box that snapped together a little tighter and fit all the gem pieces. Liked the original quite a bit, love the space saving. For the best colored logo finish, I recommend printing with the logo facing up, with organic…
Remake of Tractor design found in tinkercad Category: Toys & Games
I couldn't buy Skull & Co's grip anywhere. So I tried to make it into a 3D printer. But I didn't like any of the designs. So I brought an existing design and made a new one. The design concepts are as follows: With the grip attached, fit…
Amplify the audio volume and low frequencies of your Quest Pro. Mount them, and you can easily decrease the volume slider by about 3–4 bars and finally hear the bass! Mounting requires no additional tools. Base variants:…
Soul Reaver Remake from Legacy Of Kain full sword
Made with stronger ends and larger mounting holes.
If you want to make proper, precise remixes of the main CamLock hose end, the author does not provide STEP or other proper CAD source files. I remade his design and am providing the STEP file for anyone to work from. The current model has…
Great design by @MazaaFIN which I adjusted to fit better with the sliding bearings I bought on Amazon. They where getting a bit stuck so had to ad another holder and additional heat sinks as well as new sled with a cut out for the lamp…
Not for commercial use Hand cannon that Biggs uses in the remake of FFVII. Should be full sized and ready to print on 225x225 printer Not for commercial use Update: Missing section should be appearing shortly. I just added it into the…
Final update: I have completed the final version with the tray, notches, and made the sides of the trays thicker to make the stands not as flimsy. Quick update: I added notches to the game board (mini version for now) so you can slot it…
The STP file for remaking the mount for other bands is in a separate folder, along with the logo. If you need anything or have any suggestions, please send me a private message. There's also a stand for a Samsung band on my page. This…
Deeper adjustable rail [0,3 mm] for stronger hold. Use FX in fusion to change parameter.
I've been looking into 3D printed boardgames to print that don't excist otherwise for a while now. This boardgame looked interesting to me so i decided to print it. The original design and files weren't exactly what i wanted, so i…
Small remake of batterfly nut handle. Changed nut location. Now it is not on the end of handle, it is inside of it. Also maked handle little bigger, to be more strong. Instructions Printed with 0.8 infill Part was very strong Scad source…
Make any cell phone into a Shinra Issued PHS! The perfect look for any Board Director, Turk, or S.O.L.D.I.E.R. Disclaimer: These PHS accessories are just for visual style and DO NOT protect a phone from any drops, bumps, screen breakage,…
Designed to be printed face down as to get a textured design on it, but can be printed up if you'd like. Smooth or a fancy design that transfers over to the plate surface makes it pop better. Best results is face down with smooth or…
Refonte de la tête de Dummy13 avec un compartiment intégré
An additional Thule adapter with M8 thread and M8 DIN 934 nut must be purchased or made. In this example, the adapter is made for the Turtle Air 1 cross-bracket.
Das ist ein remake von RichRap der das Refill Filament von z.B. DasFilament, Fiberlogy etc. unterstützt. AMS kompatibel.
This is a remake of shiura's Triaxial Numechron Clock , which i did as a school project. Here is the main changes that has been done to the original design: The 12-hour wheel has been replaced with a 24-hour wheel. The numbers on the…
A touch of zany fun to your collection with this adorable chibi 3D model of a Cactuar from Final Fantasy 7 ! This iconic, quirky mascot is the perfect 3D printing project for any fan of the series. With its classic running pose,…
Poignée trottinette Freestyle Mesure prise sur poignée de marque Odi. l'extrémité est volontairement bouché afin d'éviter de mettre des bouchons de barre. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No Supports: No…
This is a remake of a clock I found on another site. I made it multi-colored, separated the alien head (to make it easier to print in a different color), and made separate pieces for the alien's eyes and the black dots on the clock face.…
Filament RunOut Sensor Remake PTFE insert
its a better and cooler case and better to print!
I recently purchased some POM nuts from RobotDigg, but noticed they only had 3 mounting holes. Since I am running a custom MK2 clone, I wanted something close to the original with little modification, Enter the new x ends. This is a…
I have put 3/8 inch dowels through the small diameter texture rollers made by CustomMiniatureMaker sold through/printed by only-games.co and I made these to organize and protect the rollers. These are stacking trays that keep them…
The bottom of a sipmple Phone Tripod Stand.
a few hints for designing: More blades = more weight, more thrust, more resistance Thicker rim = more weight Steeper blades = more thrust, more resistance Results: More weight = more energy, more flight time, more thrust or rotation speed…
Kenwood Disc Holder for 6 discs
v1.2 version is updated moved the left side wire bar back some so it would not hit when zero out. also fixed where the led goes and made a track on the inside to put the wires i would recommend not using petg or pla as u need material…
This is a remake of my self-watering flower pot that i designed a while ago, as requested by one of my followers. This is one is designed to be more easily printed with a 0.6 and 0.4mm nozzle. It has a thicker shell that can be printed as…
Motivation The Recreator3D MK5 build assumes you have an Ender3 V1. In my case the donor printer was V2, so many things had to be adjusted for the V2 parts, including the fan shroud. The fan cover STEP file taken from Creality GitHub was…
I made a Remix of the Wall-mounted drybox by Ondřej Stříteský . Now it has a paper holder in which you can put pieces of paper on which you can then write down the filament type, color or remaining amount
Custom tool holder for X3D v3 Hex AMS Riser - See the complete details below.
![Phone Tripod Stand [(Improved) Remake]](https://media.printables.com/media/prints/563015/images/6492826_2dea7b4e-5780-4a41-91e9-bdc05af120b5_cddde620-111f-4e0f-9fbf-9b8d54d4f050/s.png)
