4026 modeli
The worlds first, print-in-place, no support 100% printed, Rubik's Cube. This Cube is fully functional right off the build plate. Plain and simple. Slicing I would not recommend slicing this design on your own. There will be a pre sliced…
Print Settings: Printer:Any Rafts:No Supports:Yes Filament brand:Any (my Aurapol) Filament color:Any Brown Filament material:PLA Notes: 0.2 mm layer 0.4mm nozzle 3 perimeter 0% infill 1mm retraction 0.4 Z-hop 50 perimeters speed 215C temp…
This glider will be: Furthest gliding Quickest to print Printable on Prusa mini Continually improved through Iterative design Flight preparation: Bend wings upward (5 degrees is best I've found) (Dihedral) Bend rear elevators UP (points…
The Rubber Band Plane Vol.2 is an excellent and fun project for all ages. With its simple design and impressive flight performance, this plane offers both entertainment and a hands-on learning experience. Perfect for outdoor play, it…
This model is the V2 version of the original VasePlane which can be found here . This glider is inspired by the stereotypical single seat fighter jet appearance and has a hook just under the nose so that a rubber band can be used to…
Summary Dinky little toy blaster. it shoots about 30 feet, is pretty small and is made out of purely printed plastic and two rubber bands (One for the trigger and one for the magazine). It requires no fasteners, or glue, and just uses…
I would appreciate a lot if you could support me giving a like and downloading, thank you guys. You can also visit my profile and suport my other 3D models. Check out my latest design:…
A rubber band-driven toy car made of parts of the new 3D-printable Stemfie3D construction set. Print instructions This toy car is easy to 3D-print and quick to build. It is the first project demonstrating the new and fully 3D-printable…
tlač 1:1 pre male postavičky tlať 1:1,2 pre vačšie postavicky. vznikne vnutorný priestor 4,5cm dlhy vid fotka šroby: 3x10 4ks 3x25 1ks infil 20 perimeter 2
Update It Works really well! I printed a working one on a Prusa Mk3S+ and other printers are already printing too! Enjoy printing your own! Please assure yourself that you're using 0.1 mm layer height and printing outer perimeter first. I…
The 21 Cup Rubbermaid containers are getting harder to find and usually more expensive. Here is another great option from the community. https://www.printables.com/model/952313-filament-dry-box-with-rollers This is a spool skate that fits…
Here's my design of a Prusa XL Nozzle Scrubber / Brush. There are tools for correct assembly, brush holder and filament collector. Drawn in Fusion 360 Print instructions ¤ Remenber to use tree support on Brush holder ¤ Use .3mf or .gcode…
I've been testing the battery operated Blink Security Cameras (4th Generation) for my Promaster van. I wanted to make a magnetic mount that I could use on the outside. I wanted to use a large rubberized robust magnetic that wouldn't…
Self defense use, a novelty, or whatever you choose. Maybe this will help you drink from the skull of your enemies? Maybe use it while smoking a cigar and using the skull of your enemies as an ashtray.…
I love the Filament Cutter 45 from Pomi, but as i try to print it, i found that the needed materials are not as common available as i thought. So i decided to give it a “facelift” with a even easier accessible material: rubber band. Print…
Zelda: Rubber Helm From Tears of the Kingdom.
Use the same screw as before to attach this piece Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes, only on bed Resolution: 200 Infill: 20 Filament: Prusapolymers Petg Category: 3D Printer Accessories
[EN] The holder allows you to label Yours water/heating pipes using a standard Dymo labeler. There are 2 versions of the holder for 12 x 50mm labels (total holder size 17 x 67mm) for 9 x 50mm labels (total holder size 14 x 67mm) The…
This desiccant block fits the rubbermaid 21 cup containers. It has strong walls so it can support 1 Kg spools easily. Print Instructions: YOU MUST FOLLOW THE PRINT INSTRUCTIONS!!! Print using ZERO top and bottom layers (REQUIRED.) Use 45…
Requires an O-ring measuring 34.52 × 3.53 mm.
I used this Rubber Duck Model from Thingiverse. Enjoy it. Just stick the USB Stick into the duck and push or glue the right and the left halfes together and enjoy. UPDATE: I added a ducky Modell to fit the HAK5 USB Rubber Ducky If you…
Nature's Miracle Small Animal Cage Scrubbing Wipes 30 pack and Clorox Disinfecting Wipes 35 pack holder - for some reason, these two unrelated products have identical containers, I discovered by chance after printing. Has screw holes to…
I designed this 9-piece 6-shooter rubberband pistol. I recommend printing the sides of the gun by themselves. I printed the pins, holder, wheel, and trigger at the same time in basic red PLA. This was printed on an Ender 3 Max Neo. If you…
Info: Simple stand for Rubik's cube my son got one cube with a stand (visible on the background of some of pictures), so I modelled the same shape Print info: variants: without bottom holes: no supports needed with bottom holes supports…
Hello. For ages, my partner and I kept putting the wrong things in the wrong bins in our kitchen in our new place. We eventually got use to it, but then we noticed that whenever we have guests over, whic is a few times a month, they will…
Multi-Material, Print in Place Rubik's Cube NOTE: as of right now, this model is non-functional. There needs to be additional clearance between the individual cubes, but adding that while also providing enough adhesion between the PETG…
Back rub ticket. Updated to Rev1 to make “GOOD FOR” the same depth as “BACK RUB” so that they are equally pronounced. *If printing the single ticket "ticket-rub-Rev1" .STL model, scale JUST the Z-axis to 60% for best thickness. 5 walls…
WARNING - 3 PAUSES DURING PRINT - ONLY FOR CRAZY PEOPLE No glue needed ! Must to have ! Only in 0.2 layer or 0,1 if you are strongly crazy. Print first all 6 colors before printing the box and be carefull when you remove colors of the…
Rubbermaid sells US made 5 L food storage containers that are the perfect size for storing single 1 kg 3D printer filament spools. They also sell a cereal box lid that seals these containers for use as a dry box with a flip top to allow…
Ring printed with TPU, resolution 0.1mm Membrane printed with PLA, resolution 0.1mm, concentric infill in top and in bottom
Praktický odvaděč kondenzátu určený pro instalace v dřevostavbách. Slouží k odvádění nahromaděné vody z potrubí, například z odsávání, odvětrávání a vzduchotechniky. Technické parametry Průměry KG potrubí: 110, 125 a 160 mm Průměr…
Was tired of not having a suitable container for my wet steel wool scrubber in the kitchen so i made this. I printed this in PLA without supports.
This is a remix of @MysteryDough_5648 Filament Spool Stand to suit my needs (and maybe yours). Thankfully the original creator posted the .step file which allowed for easy remixing. The Rubbermaid 21 Cup container makes a good dry box. I…
Pour les amoureux du Rubikscube, voici la version cache boule d'attelage ;) Fichier facile a imprimer, pas besoins d'une imprimante multi-couleurs. C'est pour une boule d'attelage de 50mm! Important: Je me suis permis de rajouter dans le…
Spojka na PTFE trubičku ze závitem M6. Závity je třeba vyřezat z obou stran do dna.
Set of tactilely distinct, radially symmetrical glue-on tiles for Rubik's-style 3x3 puzzle cubes, pyraminx, etc. intended for blind, colorblind, or low-viz cubers. Printed in PLA. No supports needed. I made this for a blind colleague of…
vnější pruměr 40mm vnitřní 30mm
Have fun with your Rubix-Cube stand. I apprechiate every Like and Download, feel free to share. I printed with 15% infill, took 20 min.
EN: Reflex hammer with chamber for brush and needle for sensitivity testing. The cap nut on the hammer head is size M8. We recommend inserting / gluing washers of sizes M6 and M8 into the hammer head before attaching the TPU parts for the…
Монетница в Chevrolet Blаzer для Российских монет номиналом 10, 5, 2 рубля
This is an better version of one of my first models . It is an organiser for rubber bands. I have accumulated quite a few that come with vegetables from the grocery store and instead of being a disorganised mess in the drawer, I designed…
Replacement part for the Fru Blu bubble gun (I'm sure it's sold under other brands too) for connecting the bottle with the bubble fluid. The original bottle connector is thin and can be damaged if dropped.
Příruba na skleněný mixer sencor (foto je jen ilustrativní) Vyrobeno pro známého, typ přesně nevím.
This is a model, which shows beautifully how the caldera erube works.
Výplň 20%, bez podpěr a límce. Materiál PETG
Zátka/krytka venkovního sloupku na plot ( vnitřní průměr trubky 67mm)
I have no idea how that cube works, but it's already pre-assembled in 16 times the detail. Anyway… THIS MODEL IS FDM FRIENDLY AND REQUIRES NO SUPPORTS This toy is based on its appearance in Starfield. 2 Versions: Decorative onepiece & 2…
It might need to scale at 10%. No support needed.
doporučuji tisk minimálně z PETG a pevnější materiály
The Zevro dry food dispenser only allows a fixed dosage per portion. But what if you want to offer less, for example half a portion? This redesign allows just that. You can use the supplied raised decks to vary the dosage. They reduce the…
Based on the great tappy lite for the ROOK printer, this hotend offers the same abl and endstop function, just with an optical endstop. As I have noticed with my suboptimal CR10 hotend, the airflow of the hotend fan wasn't enough, so I…
This is my second entry for the Cooler Master FreeForm Playground Contest, and several additional designs are already in development. The models are fully custom-designed for the MasterFrame 600, a highly modular chassis built to…
Rubber band gun thing: Something i was planning to finish for a while but had been stuck on my hard drive for too long, It's a pretty simple design with an escape mechanism that shoots rubber bands when you pull the trigger. UPDATES : Feb…
This is a brass brush nozzle scrubber with a bucket for Voron 2.4. It has 2 parts which connect together with standard 6x3 Voron magnets. Printed without support. Designed to fit 300mm Voron 2.4 but could be used in 250mm or 350mm Voron…
Instructions: Print flat on build plate at 0.2mm. No supports/brims needed Let build plate cool sufficiently before removing from bed. To assemble: Flip it so that the protrusions face down Bend the vertical stabilizers up 3. Adjust the…
Made it to lay flat on the print bed and smoothed the wall
Self draining scrub daddy holder. Printed with 15% infill and supports to baseplate.
Needs a properly tuned printer for the tight clearance. Before printing full submarine printing clearnance test is advised. Print both parts, add bolt to front of submarine, lastly add rubberbands. For best spin, try adding more…
I stretched the duck width-wise to make it wider and more stable in the water. I think it also looks better this way since most rubber ducks I've seen are quite wide and look almost round from above. The attached 3mf file is prepped with…
Note to printables staff : this is NOT a remix of a different model that doesn’t allow remixes, it is an original design of my own making where I invested significant effort. As proof, I am including the Fusion360 CAD files here to prove…
A simple doorstop for multi-material printing! Intended to print the contact surfaces from flexible filament, of course this is not a must ;) As flexible filament doesn't really bond well with e.g. PLA, the two parts are slightly…
Atlas Rubic Cube Holder for standard 56mm 3x3 Rubic Cube (should hold other cubes in similar dimensions as well, like the larger metal puzzle cube picture). Requires minimal Support for the Head, Butt and arms. If your printer does…
***OUTDATED VERSION*** Find the new model here: This is an update to the Mag Fed Mini Rubber Band Gun. I have redesigned four parts to stop the back hook from jamming when pulling back the slide. The parts changed are the Grip, Insert,…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water New version here with print in place jointed legs…
This model is a remix of another glider but I wanted to make it faster so I designed a hook for it. I went through 4 iterations of the hook to make it strong enough to withstand hard impacts. I've printed more of these than I can count,…
Updated version of the MKI which fixes some issue with slicing, tolerances for easy print etc. Introducing “The Elastic Eagle MK II” - This is a rubber band pistol that doesn't need any assembly. I found many 3d printable rubber band…
My wife asked me to make a holder for the scrub daddy sponge and this is the result. It sits on the side of the sink with an outlet for the water This is a new design with print in place jointed legs, in the original the legs clipped on…
***OUTDATED VERSION*** Find the new model here: I have spent a few years iterating this project. Finally it is fairly simple and reliable. This rubber band gun shoots bands from a MAGAZINE. It uses small “rainbow loom” bands, which allows…
Print-in-place articulated Scrub Daddy sink holder designed for easy, support-free FDM printing. Prints in about 2.5 hours and uses roughly 45 grams of filament . Articulated legs hang over the sink edge, arms support the sponge, and a…
A remix of a very simple design, I increased the shoot per load from 3 to 4. I also made hollows in the body to decrease material usage. There is also a notch for adding an optional small rubber band, inside the body and trigger, hidden…
Źródło oznaczyło ten model jako treść 18+.
Die 3D-gedruckte Abfalltonne im Maßstab 1:6 für ein Puppenhaus ist ein beeindruckendes Miniaturmodell. Dieser Bausatz enthält eine detaillierte Tonne mit folgenden Merkmalen: Öffnender Deckel: Die Abfalltonne verfügt über einen…
This Rubber Band Powered Paper Plane will soar through the air, perform awesome stunts and more! An awesome toy for the Great Outdoors and even inside! (with caution) Materials: THIS Paper Airplane (…
Print with PETG and take different color for the Fuselage. Use kitchen elastics for Slingshot. Build instructions: First put Wings in the Fuselage Then, Input 2x m8 nut into Eagles eyes (its purpose of weight) and build parts together. It…
UPDATE 12/2025 As some users reported that the springs become weak after a while, I reinforced them. I didn't test them so far, as my original version still works fine. But I hope, this improves the model and I'm looking forward for your…
A dive into the past, we all had one in our younger years... well most of us anyways. You'd be lucky to find one in between all the NERF guns in the isles today. I was having trouble finding one, so it was time to hop on CAD and make my…
print in 0.1 to 0.3 layer height, prob best with petg or pctg but used bambulab pla+ basic print in place recommended: print with brim and supports works the best
It cleans the nozzle every Time in get parked. Also great for Tool changer, since it then cleans every Time.No need to adapt gcode or Change the settings! 13.11.2023 Added 2x redesigned and optimized (for 0.6mm nozzle) debris buckets…
Rubber Duck in Voronoi Style. I don't think it swims well in water, but it would be nice to print anyways! Category: Animals
An attempt to make a rubber band powered plane. Easy and quick print. Doesn't fly well though. It might need a lot more thrust. I hope some of the ideas are useful to others. To assemble, run a rubber band through the prop, insert the…
Źródło oznaczyło ten model jako treść 18+.
Easy to print and perfect for any hoodie! A chic accessory for fashion-conscious people. 😅
The pre-painted multicolor version for the AMS is available here: https://makerworld.com/en/models/112578#profileId-120559 This version doesn't have enough clearance to be used on all keys, so keep it to a corner if you can. I have a…
Loved this design, wanted it to make a Valve cover! Can be tight to get on the valve stem at first but keep it nice and straight and it goes on great! Printed this in Yellow PLA at 0.3mm with a little bit of variable layer height on the…
UPDATED to V4. Combined fuselage and hub into one part so glue is no longer required. Simply twist the rotor into a propeller shape using a lighter or hot water then insert the rotor into the fuselage. I recommend using size #8 rubber…
Simply push the original Prusa anti-vibration feet into the prepared hole — it fits snugly and stays in place without the need for glue. Print it without supports! For the Core One L, the feet are compatible, but only with a single screw…
This customizable rubber stamp prints easily in TPU. Stretch it over the nubs on the handle and you are ready to print! I used block print ink rolled out on a piece of glass for inking the stamp, but a conventional stamp pad should work…
I used Blender to remove text from the parts that had it. I've included the original files from the model in case anyone wanted to mix and match parts or if they want to start from scratch. You can read stuff from the original Tic Tac Gun…
The current mount contains very thin walls, therefore it is very fragile, I redesigned the mount, now it is monolithic.
Trash bag dispenser Can hold a roll of 35L bags or any roll of bags with 6cm diameter and 15cm height/length 2 screw holes Easier to print bottom chamfer than on the original model Remixed from Augustas Kazlauskas fine Trash bag holder to…
NEW: Nevermore Mini - Basic Assembly (5020) It doesn't need any complicated electronics - just connect a fan you already have (5020, 5015 or 4028) and experience filtration just as good as with all the fancy electronics and sensors!…
This rubberband butterfly toy is a fun and engaging way to entertain children for hours! Simply wind up the rubber band and watch as the butterfly flutters its wings and takes flight. Perfect for outdoor play or indoor fun, this…
Make sure to generate supports when printing!
Rubik's Cube Stand Category: Puzzles
What started out as a remix has now been completely overhauled in CAD to require a bit less Y-overtravel and be a bit more robust. If you are here to reprint a specific part, or using parts from other remixes, it may not fit together…
This was the longest design I have ever worked on. I started the Rubik's Cube design about a year ago and have attempted this print with 1 other printer. No success. I then scrapped the design and started over. This design has less flaws…
![OSVAC Female F32 -> Karcher WD series with rubber seal [xHain]](https://media.printables.com/media/prints/b71a27c1-9267-4670-9146-e964da248f9a/images/10373390_bae051a6-9257-43f9-a3b1-42b074d21a22_c061616a-6335-4414-8c31-27bf909e02c6/vacuum_hose_kaercher_f32.png)
![[Testers Wanted] Multi-Material Print in Place Rubik's Cube](https://media.printables.com/media/prints/572376/images/4578518_479a5991-9a3a-49ac-9fb3-138463d24338/rubiks_cube.png)
