Wyniki wyszukiwania: s21

Sortowanie

Liczymy pasujące modele…

P
Printablesballes

DS212 oscilloscope stand

A simple stand for the DS212 from miniware (see e. g. https://e-design.com.cn/en/Mini-Oscilloscope-DS212-PG9226721 ) which simplifies the readout of the graph. Materials I've printed with: PLA and PVB I printed it a while ago, so I don't…

Pobrania
23
Polubienia
8
Ocena
0
P
PrintablesTitan3D

Samsung Galaxy S21 Ultra Honeycomb Case

This is a case I designed for my S21 Ultra. I was not happy with the few printable models I found online for the S21 Ultra. After I made 5 prototypes I discovered that TPU was super slick in the hand so I added the honeycomb texture to…

Pobrania
2024
Polubienia
121
Ocena
4,8
P
Printablestommck

Flexible Galaxy S21 Phone Case

Designed in Fusion 360 for Galaxy S21. Needs supports “everywhere”. Print it in TPU with around 8% infill and it will have a nice squish to it. Included the f3d file if people want to tweak the parameters Update: Added my 3mf file so…

Pobrania
1981
Polubienia
75
Ocena
5
P
PrintablesMAZ

Samsung Galaxy S21 FE (5G) Phone Case

Case for Samsung Galaxy S21 FE (5G). Printed with TPU 95A Update V2: Added a v2 file where I removed the bit around the volume buttons to have a better access to the buttons. V1: Support recommended for gap around volume buttons at the…

Pobrania
1139
Polubienia
47
Ocena
4,67
P
Printablesjuricabi

SAMSUNG GALAXY S21 / S21 5G TPU CASE

Bottom is flat. Case is tested. Best printed slowly in TPU.

Pobrania
888
Polubienia
44
Ocena
4,17
P
Printablesmrichardson

Case for Samsung S21 Ultra

Note: The model does not include the “MR” logo shown in the picture. The uploaded model is just a flat back. This case fits the S21 Ultra perfectly (at least with a flexible material--I printed with 95A TPU). It extends above the screen…

Pobrania
800
Polubienia
44
Ocena
3,33
P
PrintablesWaschtl

Synology DS218+ SSD Adapter

This is a small SSD mounting adapter for my Synology DS218+. Theoretically this should also work for other "slot"-type drive cages. Note that the latch is missing the little pin on the front. Original source for the adapter plate:…

Pobrania
615
Polubienia
99
Ocena
4,9
P
PrintablesJohnA

Samsung s21 Case

This is a remodel of another case found here on thingi. I modified it to show off the camera module more and change some clearances to fit better after printed on my ender 3. There's also a version (v.3) that is connected between the top…

Pobrania
600
Polubienia
35
Ocena
5
P
Printablesaddigreen

Samsung Galaxy S21 Slim TPU Case

Having owned an S21 for some time now, I was disappointed to find that I could no longer buy an original case for it. So I decided to make one.

Pobrania
546
Polubienia
36
Ocena
4,6
P
PrintablesICHTHYS

samsung galaxy s21 phone case

This is a remix of the Samsung Galaxy S21 Phone Case by LeeoNardo on thingiverse. It was made to be made of plastic, but I made it to be printed in tpu. When I printed it it fit well.

Pobrania
513
Polubienia
22
Ocena
4,33
P
PrintablesColson

Samsung Galaxy S21 Ultra Phone Case (Heavy Duty)

Ever wanted to have a beefy case to match your beefy phone? This case is for you! This case is designed for people who want to see their phone die from old age instead of from hitting the floor, using think walls and large lips to keep…

Pobrania
477
Polubienia
40
Ocena
5
P
PrintablesPrinty Ponky

Samsung S21 Case (Sleek & Minimal)

Introducing a minimalist and functional case for the Samsung Galaxy S21 , designed to offer optimal protection while maintaining a sleek look. This case comes in two variations : one with a microphone cutout at the top edge and one…

Pobrania
466
Polubienia
26
Ocena
5
P
Printablesdziobu

Samsung S21 phone Case

Simple case for S21. Project made for TPU; print with supports.

Pobrania
459
Polubienia
35
Ocena
4
P
PrintablesLars Becker

Samsung Galaxy S21 5G Case Hülle

Samsung Galaxy S21 5G Case. Presenting the Samsung Galaxy S21 5G Case, printed using BambuLab P1P and BambuStudio with a fuzzy skin option to provide an improved grip while holding the phone. (printed both settings on 0.1mm to achieve…

Pobrania
399
Polubienia
15
Ocena
5
P
PrintablesJoão R S

Samsung Galaxy S21fe Case

This is a remix... but I can't find the original model anymore :/ Version 1 is with hole for charger (not tested) Version 2 does not have a hole for the charger (to prevent dirt from entering the port, it charges wirelessly) Added .stp…

Pobrania
338
Polubienia
29
Ocena
4,67
P
PrintablesFabri91

Synology DS218+ vibration damper

Vibration dampening support to be placed under the NAS's square foot. May fit any model that uses the same 13 mm side foot. To be printed in TPU - for my usage, with only one “heavy” 3.5" hdd installed printing it with two walls, 0.2 mm…

Pobrania
310
Polubienia
46
Ocena
5

Handyhülle Samsung S21 Ultra 5G

Druckbare Handyhülle für das Samsung S21 Ultra 5G Sollte mit TPU welches einen ashore von ca A85 gedruckt werden

Pobrania
298
Polubienia
23
Ocena
0
P
PrintablesSerge K

Samsung S21 FE Cover (+Magsafe)

You are very welcome to experiment with the first layer pattern. ‘Octagram spiral’ and ‘Hilbert curve’ are my favourites for this purpose. Printer settings: Filament: I recommend using PETG, ABS, PLA. Avoid Flexes as they will be very…

Pobrania
297
Polubienia
12
Ocena
5
P
PrintablesJ.V.H.

S21/S19 Pro Antminer 200mm Air Duct

Free for all. Engineered for performance. Let’s mine silent. ⚠ Experimental Status Use the gasket (Printed in PLA or PETG) to verify the alignment of the holes. And let me know if something needs to be changed! I have used this model:…

Pobrania
296
Polubienia
9
Ocena
0
P

Galaxy S21 Ultra 5G Case

A case I made for my S21 Ultra... I made the back blank so you can emboss any design you want on the back. Print Settings Printer: Ender 5 Plus Rafts: No Supports: No Resolution: 0.2 Infill: 20% Filament: Ramberry TPU Black Category:…

Pobrania
270
Polubienia
20
Ocena
4

DS213 Oscilloscope Rugged Box (+ Stand)

I wanted a box to store the DS213 pocket oscilloscope that had the same size & shape as my TS101's box. I also made a stand, this can fit under the probe tips, it prints in one piece mostly, but there are two small “cubes” that can be…

Pobrania
256
Polubienia
59
Ocena
5
P
PrintablesRedAura

Galaxy S21 5G PETG Case

I have added a cut-out for the microphone, which is located at the top of the frame. PETG can be a bit slippery, so my tip: print it on a rough PEI spring steel plate. This way I was able to create a fabric-like feel. Feel free to leave a…

Pobrania
248
Polubienia
13
Ocena
4,67
P
PrintablesJohnA

dimensionally accurate Galaxy S21 (6.2 inch)

This is my attempt at a dimensionally accurate model of the S21. I used it as a tool to make a case. I have included the .stp in "case" you would like to do the same. The .stp and .stl files should be pretty freaking close to the actual…

Pobrania
243
Polubienia
14
Ocena
0
P
PrintablesAritz

Funda Samsung galaxy s21

Funda para el Samsung Galaxy s21

Pobrania
242
Polubienia
16
Ocena
5
P
Printablesc3poSAW

Synology Wall Mount DS218

A Simple Holder for DS218 and DS218+, DS220+, and DS214Play. DS216+II Print Settings Printer: A30 Rafts: No Supports: No Resolution: 0,22mm Infill: 25% Filament: Janbex PLA RED Post-Printing Mount it to the Wall I recomend to use Screws…

Pobrania
228
Polubienia
46
Ocena
5
P
PrintablesAchille Pinato

Samsung Galaxy S21 5G Hexagon Cover with Mag Safe

the mag safe socket is 1mm deep. doesn't offer much protection but still does his work

Pobrania
213
Polubienia
22
Ocena
0
P
PrintablesSatorlith

Mercedes Class B W246 on screen phone holder (Galaxy S21 Ultra)

I designed this support to hold my phone in my car because I couldn't find what I had in mind ;-) Fit the Mercedes Command Audio Screen (not touch screen). It is designed in two part with a dovetail for assembly. The frame can be equiped…

Pobrania
208
Polubienia
30
Ocena
5
P
PrintablesPrintTroyer

Galaxy S21 FE phone case

A remixed version of Manz_906945 which now includes a honeycomb/hexagonal pattern.

Pobrania
202
Polubienia
8
Ocena
0
P
PrintablesParsa Kmz

S21 FE Basketweave Cover

For PLA or ABS material, use "CUT" version. More S21FE cover models and STEP files on Patreon Print Settings Printer: Prusa Bear Rafts: No **Supports:** No Resolution: 0.15mm **Filament:** PARTX PLA White Notes: To have a nice first…

Pobrania
191
Polubienia
3
Ocena
5
P
PrintablesLuka

Synology DS218+ Dust cover

Synology DS218+ Dust cover 群晖DS218+防尘罩

Pobrania
184
Polubienia
13
Ocena
5
P
PrintablesMatMake

Smartphone stand with passive amplifier for Samsung Galaxy S21/S21 FE

I print the one that is used with the SolidSuit with an adaptive layer height from 0.12 to 0.2mm to save approx. 2h (compared to a full 0.12mm layer height). I only print the stand for smartphone with RhinoShield SolidSuit because I never…

Pobrania
177
Polubienia
23
Ocena
5
P
PrintablesJohnA

s21 case

print with no infill, all perimeters. should be ok in pla and definitely works in PETG

Pobrania
176
Polubienia
7
Ocena
5
P
PrintablesSchraubaer

Smartphone - Halter für VW-T6 / Samsung S21 Ultra

Gedruckt wurde auf einem Prusa MK4 mit 0.4er Düse, PETG. Kein stützen erforderlich. 08/2024: Ich habe die Version mit Sonnenschutz überarbeitet und verstärkt da sie sich bei starker Sonneneinstrahlung verzogen hatte. Sie wurde krumm. Mal…

Pobrania
172
Polubienia
21
Ocena
0
P
Printablesdvanderspoel

10" Server Rack 3U Shelf and Plate for Synology DS215j NAS

A simple shelf and plate for the Synology DS215j NAS to fit into a 10" Mini Rack. The size of the opening for the NAS is 101mm x 161mm - this may work for other similar sized NAS units but no guarantees. Smaller printers like the Ender 3…

Pobrania
148
Polubienia
18
Ocena
0
P
PrintablesLabC0de

Phone case/stand for Samsung S21 ultra with lid

This case prints in place and needs no supports. I Printed this on my Core One with the 0.1 fast detail preset for prusament PLA. The buttons still need some work. While usable they have to be worked free first and jiggled around a bit…

Pobrania
142
Polubienia
20
Ocena
0
P
PrintablesCptpladypuss

Samsung S21 TPU phone case.

Simple TPU phone case. Print with supports. If original does not fit using material harder than 85A. Scale model up to 82.8mm in X-axis by 163.8mm in Y-axis for a better fit. In my experience with this model, the original fits just fine…

Pobrania
142
Polubienia
12
Ocena
5
P
PrintablesSchnello

Samsung S21 FE Car Holder Brodit System

Samsung S21 FE Car Holder Brodit System AND Spigen Tough Armor Cover (see pic) Category: Other

Pobrania
138
Polubienia
9
Ocena
0

Synology DS218/DS220/DS224+ Stand

This is a Synology DS218/DS220/DS224+ Stand to reduce noise and vibration. It also helps with better ventilation. You need door seal stripes at the bottom of the stand with a 9mm width. I used these:…

Pobrania
137
Polubienia
20
Ocena
5
P
PrintablesVaTTeRGeR

Sliding Box for Miniware TS21

Additional hardware needed for assembly: 2x M3 nuts, pressed into the lid, to minimize wear from the plungers. 2x 5x6mm (Case Diameter x Height) spring loaded ball plunger (Bambulab FB004), pressed into the base for lid retention. Print…

Pobrania
133
Polubienia
20
Ocena
5
P
Printablesrobertcigan

Mercedes E W213/S213 Wagon Trunk Luggage Compartment Plate Hinge

This is a replacement part of the Mercedes W213 Wagon Trunk/Boot luggage compartment hinge (plate cover under the trunk carpet where the first aid kit, triangle etc. is stored). I had one already broken and broke the other one wery…

Pobrania
129
Polubienia
5
Ocena
0
P
PrintablesRussell Dame

TP-Link ES210X-M2 10" Rack mount

ES210X-M2 10" Rack mount I recently upgraded the networking in my house and needed to get the clutter cleaned up. Enter the 10" rack. This is a VERY tight interference fit, designed to not need screws to lock the switch in place. Make…

Pobrania
128
Polubienia
5
Ocena
4
P
PrintablesCaptainBalu

Phone holder for Samsung S21 Ultra

This is a phone holder that I designed for my own Samsung S21 Ultra. It is thinned at the back so that a wireless charging plate can be attached if needed. There is a cutout for the speaker at the bottom. It can also be used lying down. I…

Pobrania
127
Polubienia
10
Ocena
0
P
PrintablesDerNico AuHuur

Flashlight Wurkkos TS21 GoPro Mount

Die Halterung klemmt die Wurkkos TS21 Taschenlampe (Außendurchmesser 26mm) fest an einer ihrer Rillen. Für die Klemmung kann eine erhitzte M5 Sechskantmutter unten in die seitliche Klemmung gedrückt werden, sodass sich die Halterung mit…

Pobrania
127
Polubienia
18
Ocena
0
P
PrintablesVist

Transformers Phone Case S21 FE

I printed on its back without supports

Pobrania
122
Polubienia
15
Ocena
0

Camera Rig Cage for Samsung Galaxy S21

A camera rig cage for a Samsung Galaxy S21 mobile phone with bonnet lens/filter mount and cold shoes for lights/mics. It also has cutouts for gluing in two ¼"-20 nuts to mount a tripod/monopod or a smallrig-style handle. This should make…

Pobrania
119
Polubienia
42
Ocena
0
P

Another Metabo KGS216 to osVAC M32

A german translation can be found after the english one And another adapter for the Metabo KGS216 to osVAC M32 ... :-) There are already one or two models for such an adapter, but somehow I couldn't find the right one for me. Sometimes an…

Pobrania
118
Polubienia
9
Ocena
0
P
PrintablesRené

Handy Halterung für das Auto( Getränkehalter ) Samsung S21 5G

Eine Handyhalterung für das Auto im Getränkehalter ( Samsung S21 5G mit Hülle). Auf Wunsch kann es auf jedes Handy angepasst werden.

Pobrania
118
Polubienia
5
Ocena
0
P
PrintablesRaveniarty

Samsung Galaxy S21 5G TPU Case with Magsafe

TPU case remixed for the magsafe ring. A friend wanted a 3d printed case with his phone, but I lacked the magnetic ring, so I remixed the model to have the space to insert a magsafe ring. Also, I strongly suggest to use Fuzzy skin because…

Pobrania
116
Polubienia
8
Ocena
0
P
Printablessva3D_

phone case with card holder for s21 fe

a case with card holder for the Samsung s21 fe

Pobrania
114
Polubienia
9
Ocena
0
P
PrintablesEmer genz

OsVac Adapter for Makita Mitersaw (LS1219L, DLS211)

Ich habe den Adapter für meine Makita DLS211 erstellt.

Pobrania
108
Polubienia
8
Ocena
5
P

SAMSUNG WIRELESS CHARGER EP-P2400 / S21 FE

support for wireless charging base and cell phone

Pobrania
105
Polubienia
16
Ocena
5
P
PrintablesRuben U

Samsung S21 - S23 phone holster

I use this phone holster in a clean room. I've designed holes in the bottom for particle reduction and as a drain in wet environment. 2" belt loops. PETG was used at 0.2mm LH. Printed vertically on a Prusa MKS3+ and Sovol SV06 plus. , no…

Pobrania
104
Polubienia
11
Ocena
0
P
Printablesmyqubus

Handyhalter Samsung S21 mit Hülle inkl. USB Winkelstecker

Ich habe im Auto das Brodit Handyhalterungssystem und die dazugehörigen Schalen bisher jeweils passend gekauft. Das Problem war, eine Handyhülle war nicht vorgesehen bzw. der Ladestecker passte dann nicht mehr. Dieses Modell passt. Es…

Pobrania
103
Polubienia
15
Ocena
5

Synology DS218 holder for WD Passport external drive

Two easy-to-print hooks for adding an additional drive - WD Passport - to your Synology DS218 server. Add adhesive felt pads and everything will sit tight.

Pobrania
100
Polubienia
20
Ocena
5
P
Printablesmorningtools

MINIWARE TS21 Precision Soldering Iron Pen Cap

This 3D printed accessory is designed to facilitate users who have purchased the MINIWARE TS21 precision soldering iron

Pobrania
99
Polubienia
7
Ocena
4
P
PrintablesSichlau

Milwaukee Table Saw (FTS210) miter slot gauge adaptor

Milwaukee Table Saw miter slot gauge adaptor, for mounting of digital/dial gauge - To be used for blade/fence alignment.

Pobrania
94
Polubienia
30
Ocena
0
P
PrintablesMetaFluX

Diffuser for Convoy S21A flashlight

Remix of this ( https://www.thingiverse.com/thing:2957181 ) Diffuser for Convoy S series (high resolution version), so it can fit on my Convoy S21A. I recommend reading Summary of the original project. I don't think it's needed, but I…

Pobrania
90
Polubienia
18
Ocena
5
P
PrintablesFlint3D

Miniware DS213 Case

More space for your DS213. I found i very hard to fit everything in the original design, so i made a bigger box. It also fits every additional equipment and the manual. This is a remix of the orginal:…

Pobrania
89
Polubienia
10
Ocena
0
P
PrintablesAlex_Doe

Antminer S21,Pro,Ks3,Xp,S19 to 8inch(200mm) Psu DUST

Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3 and its Power Supply. With this flange you can easily hang it on the wall or anywhere else. Creality Cloud…

Pobrania
88
Polubienia
5
Ocena
0
P
Printables67bope

Savoia S21 Folgore

Remixed Savoia S21 Folgore (movie: Porco Rosso / Red Pig). Designed by Pierre GENTIL (FMS Model) https://www.simpleplanes.com/a/Zt8k75/Savoia-S-21-Folgore-Porco-Rosso-Studio-Ghibli Source:…

Pobrania
85
Polubienia
10
Ocena
0
P
PrintablesJeff Theisen

Galaxy S21 5G Case

I searched but could not find a decent case or the Samsung Galaxy S21 5G so I designed one myself in Fusion 360. The buttons are “print in place” and work surprisingly well.

Pobrania
84
Polubienia
1
Ocena
0

Eufy S210 Doorbell Cover

I have had 2 Eufy S210 doorbells die due to rain (replaced by warranty luckily). I had enough and created a cover that diverts the rain away. Been used for 1 year now and not had the doorbell fog or have any issues since. Recommended to…

Pobrania
84
Polubienia
10
Ocena
0
P
PrintablesRuckus

S21+ Phone Case (Integrated Buttons)

This was printed in tpu at 240 c 60mms with a 55c print bed temp. may take 7-8 hours with 60mms. The photo is a mix of different models that i super glued to the case for a custom feel.

Pobrania
83
Polubienia
4
Ocena
0
P
Printablesniller74

Miele S2180 S2111 S2121 Vacuum Cleaner Hose Suction Pipe

Replacement part for the Miele S2180 S2111 S2121 Vacuum Cleaner. Do not try to print this in PLA. At least PETG is required or the clips will break. Remove the hose from the original connector without cutting it. Gently push the hose into…

Pobrania
79
Polubienia
11
Ocena
5
P
PrintablesMolot

Samsung Galaxy s21 Ultra case with Witcher unicorn

I decided that I don't want a bland smooth case for my phone. I love Witcher games, both computer and LARP. So here it is, remixed from two good sources. Category: Mobile Phone

Pobrania
78
Polubienia
9
Ocena
0
P
PrintablesCorey Spitzer

Steam Deck Phone attachment for S21 Ultra with case

This file is a phone holder for the steam deck. Currently this is set up for my phone which is a s21 ultra with the case

Pobrania
76
Polubienia
14
Ocena
0
P
Printables0sy

Samsung Galaxy S21+ 5G Case

Remixed the original model by Ginty from Thingiverse. - Added charge port clearance - Added power button clearance This improves usability.

Pobrania
74
Polubienia
8
Ocena
5
P
PrintablesJohnA

S21 case, Designed for PETG (6.2 in model)

ATTENTION: this requires mirroring on the x axis. This is like the 20th version of this case for me. I am really happy with the fit. It should not require any scaling or adjustment. At least it doesn't on my ender 3 v2. The back of the…

Pobrania
73
Polubienia
1
Ocena
4
P
PrintablesThomas Hoeser

Metabo KGS216M Zero clearance insert

My KGS216M is an older version with different shape than the current version.

Pobrania
71
Polubienia
6
Ocena
0
P
Printablesmac310

Samsung Galaxy S21 Nillkin Camshield case - lens shield

Printed in PLA with Hilbert curve top face.

Pobrania
71
Polubienia
13
Ocena
0
P
Printableskuba

S21 case

obal na telefon s21

Pobrania
66
Polubienia
6
Ocena
0
P
Printablesbassderek

S21 FE Adapter for Gamesir X2 Pro

I wanted to create a simple adapter/sled that fit around the Galaxy S21 FE phone inside the Gamesir X2 Pro Controller so that it looked nice and clean. I printed the adapter vertically on it's side with a brim and organic supports. For…

Pobrania
65
Polubienia
6
Ocena
0
P
PrintablesJan Halas

Synology DS218+ vibration-dampening legs

My first model, simple and overkill, but effective. Takes about 1.5 hours to print, print two for both ends. Print in TPU without supports, with the following parameters: Material: CR-PLA_1.75 Layer Height: 0.15mm Wall Line Count: 3 Top…

Pobrania
63
Polubienia
14
Ocena
5
P
PrintablesWRTECH

Centriphone pro Samsung Galaxy S21 Ultra

PROJEKT CENTRIPHONE PRO Samsung Galaxy NÁVOD Stáhněte si model držáku na telefon a vytiskněte na 3D tiskárně. Veškerá nastavení tisku si upravte pro potřeby vaší tiskárny podle vašich zkušeností. K držáku připevněte tenký rybářský vlasec…

Pobrania
62
Polubienia
8
Ocena
0
P
Printablesocean rocher

Savoia S21 / porco rosso

This is a 3D printable adaptation of the metal Savoia S-21 model sold to the Ghibli Museum (last photos). For manufacturing I used a layer height of 0.16mm with a 0.4mm nozzle for size 4, and I used a layer height of 0.1 with a 0.2mm…

Pobrania
59
Polubienia
21
Ocena
0
P
PrintablesEdgley Makes

ECM - Soundbar Stand - Hisense HS2100

Simple desk or tabletop soundbar stand for Hisense-HS2100 soundbar, this is designed with a slight tilt up . No supports are needed with this model and should take approximately 1.5 hours to print at 0.2 with 20% infill, depending on…

Pobrania
57
Polubienia
5
Ocena
0
P
Printablestinfoilhat

XY-AS21HPA (TPA3255 AMP) Frame

took inspiration from : https://www.printables.com/model/1332736-fosi-audio-zk-tb21-amp-frame decided to make one for XY-AS21HPA (TPA3255 AMP)

Pobrania
57
Polubienia
9
Ocena
0
P
PrintablesHubczix

Flashlight diffuser and cap for Convoy S21A

Diffuser and cap designed for the Convoy S21A flashlight. The cap prevents blinding other cyclists and drivers. The diffuser disperses the light from the flashlight so you can use it as a lamp. 3D PRINTING SETTINGS: Material: Creality…

Pobrania
57
Polubienia
7
Ocena
0
P
PrintablesHubczix

Rugged box for flashlight Convoy S2+ and S21A

Rugged box for flashlight Convoy S2+ and S21A printed in Creality Hyper PLA, seal printed in TPU/TPE 20D. The box in the photos is version v1, the files contain the improved version v2. The v2 version has the changed hinges and latch seen…

Pobrania
57
Polubienia
15
Ocena
0
P
PrintablesFotzsyzrk

Convoy S21A Flashlight bike cap

Print it out of PETG, ABS/ASA or similar temp resistant filament. Flashlight could melt PLA in higher modes.

Pobrania
56
Polubienia
12
Ocena
0
P
PrintablesJazzzzX

Samsung S21+ back panel

Custom back panel designed by me, Use textured PEI Plate for the gradient look

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesBrian Berkley

S21 Ultra Phone Stand with Wireless Charger

Puck cutout is 90mm x 10mm for a Verizon wireless charger.

Pobrania
53
Polubienia
8
Ocena
0
P
PrintablesPsyclist

Galaxy S21 FE Standby Mode Dock – Remix

Designed to press fit the Ambrane Wireless Charger for the S21FE, while the top houses the stock Galaxy Watch 4 Charger which can be popped out using the included hole at the bottom. Printed using a BambuLab A1. Charger Puck Dimensions:…

Pobrania
49
Polubienia
12
Ocena
0
P
Printablesdvd604

Sofirn HS21 Magnetic Mount

Magnetic mount for the Sofirn HS21. Pause the print at the top of the pockets and insert up to 5 8mmx3mm circular magnets. Printed in PETG-CF at 0.2mm layer, seems plenty strong enough. Magnets will hold torch upside down, and print seems…

Pobrania
49
Polubienia
2
Ocena
0
P
Printablesdrei-d-w

Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - ShopVac CamLock Adapter - 3DW

The Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - SHOPVAC CAMLOCK adapter is an accessory designed to connect the dust extraction port of the machine to the SHOPVAC CAMLOCK vacuum system. Best to use together with this part:…

Pobrania
49
Polubienia
6
Ocena
0
P
Printablesaqf23

Convoy S21A Flashlight Cap (D26,5mm)

The original cap was for a Convoy S2+ with a 24mm outer diameter, I have scaled it for a Convoy S21A with a 26,5mm outer diameter. I love this cap, I not only use it nearly every day on my Road and MTB rides, but it is also the best from…

Pobrania
48
Polubienia
8
Ocena
0
P
PrintablesAlan Břuska

Stand for Samsung S21 FE

Stand for Samsung S21 Fe mobile phone designed for contactless EONO charger.

Pobrania
48
Polubienia
4
Ocena
0
P
PrintablesAlex_Doe

Antminer S21,Pro,Ks3,Xp,S19 to 8inch(200mm)

Full set for efficiently ducting the intake and exhaust air of a Bitmain Antminer S21/S21Pro or S21XP, Antminer KS3. With this flange you can easily hang it on the wall or anywhere else.…

Pobrania
47
Polubienia
1
Ocena
0
P
PrintablesTickTock

S21 Ultra Otterbox S Pen holder

This is a holder for a Note20 S Pen on a Otterbox defender for a Galaxy S21 Ultra. Uses a 1/4" x 1/16" magnet inserted when it reaches 14.2mm to help keep the pen secured. Maybe add a tiny dot of glue to help keep it in place. Print…

Pobrania
47
Polubienia
8
Ocena
0

Bike cap for Convoy S21A flashlight

It can be printed without supports.

Pobrania
46
Polubienia
5
Ocena
0
P
PrintablesThe_Claw

DSLogic Pro and DS212 case

Case to hold DSLogic Pro and DS212 space for accessories in the bottom. Hardware needed - 2 off 6mm x 3mm round magnets, 2 off M3 x 6mm POSI pan head screws, 2 off M4 x 30mm POSI pan head screws Print instructions Category: Tool Holders &…

Pobrania
46
Polubienia
5
Ocena
0
P
PrintablesBeehphy

SIGLENT SDS2104X Protective Cover for Oscilliscope

I wanted to protect my equipment from bumps in transit, or dust while not in use. I designed this to print in one pass on the bed of a Bambu Labs X1/P1, and that mean many others as well. Choose which side the device model labeling is on:…

Pobrania
45
Polubienia
8
Ocena
0
P
PrintablesElectric Fjord

S21 FE case with ring and added protection

A samsung s21 case with a finger ring holder for safety and fun. Added thicker lip for holding the phone in the case and high corner protection.

Pobrania
45
Polubienia
2
Ocena
0
P
PrintablesPrettyPrinter

Wurkkos TS21 / TS22 flashlight diffuser

Diffuser that also enables flashlight to stand on its head.

Pobrania
45
Polubienia
7
Ocena
4
P
PrintablesPedja

DS212/DSO212/DSO202 Oscilloscope Mini Stand

Very small stand for DS212, DS02 or similar size oscilloscope or some other device. Part dimensions are 35 x 5 x 10 mm so it easy fits in any box or bag you use to carry osciloscope around. Although You may use single stand it is more…

Pobrania
44
Polubienia
3
Ocena
0
P
PrintablesVaTTeRGeR

Miniware TS21

Model made from measurements of the Miniware TS21. Intended for making your own case, retainer, etc.

Pobrania
43
Polubienia
5
Ocena
0
P
PrintablesNeonshadow

Samsung S21 Ultra (with OtterBox case) Phone Holder - Kia Optima (2014)

This is a phone holder for a Kia Optima 2014. It's Designed for a Samsun S21 Ultra using an OtterBox phone case. It is meant to slot into the Kia center console (empty space) Note that if you print this with a .4 mm nozzle, the thin wall…

Pobrania
43
Polubienia
9
Ocena
0
P
PrintablesChris Laplante

Samsung S21 FE case remix - Cutout for wireless magetic charger.

I modified this design to create a cut-out to use a magnetic wireless charger. I had added a magnet to my phone with this product: https://www.amazon.com/gp/product/B09BZ17JM7/ref=ppx_yo_dt_b_asin_title_o08_s00?ie=UTF8&th=1

Pobrania
42
Polubienia
4
Ocena
0
P
Printablesdrei-d-w

Makita DLS211 / LS1219 / LS1219L / LS1019 / LS1019L - upper hose replacement - 3DW

First, unscrew the extraction nozzle from the hose. Then, screw the 3D-printed adapter onto the hose. Remove the counterpart from the machine (by loosening the screw). Finally, insert the printed adapter together with the suction hose…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesJacob

Sofirn HS21 Bezel Tool

Tool to remove the bezel

Pobrania
40
Polubienia
6
Ocena
4