1706 modeli
01 - Summary A simple reusable tie fastener to organise cables and other long objects. It features 1-12 holes with lengths 40-205mm for great versatility. Unlike other cable ties, this puts ease of use first, with a simple fastening and…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
For the “Last Meters” contest i thought it would be fitting to print something that not only uses a little of plastic, but also something that is actually good for the environment. If personally hate using floss and instead use…
Wydruk około 0,26 €–0,31 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update 2025/11/16: Inland and Esun have updated their refill spools, so this spool is no longer compatible. A reusable filament spool designed to work with Inland brand filament refill packs. The two halves screw together.…
Wydruk około 5,82 €–7,11 € nettoWstępna wycena jednego wariantu
Model has been updated for newest rolls that are 80mm in diameter and have a notch cutout. I recommend printing a layer height no more than 50% of your nozzle size(ex. no more than .20mm layer height for .40mm nozzle). Printing any higher…
Wydruk około 3,28 €–4,00 € nettoWstępna wycena jednego wariantu
This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Works with original spool. I always have trouble printing hex designs. So i did a spoke design. This has much less retractions. During design I saw that it reduces print time if you only have one center hole so its done this way. original…
Wydruk około 5,00 €–6,11 € nettoWstępna wycena jednego wariantu
I created a stamp handle, and a paw stamp. For the stamp handle, the material with which it is printed does not matter. For the stamp itself, it is important that it is printed with TPU. After that I sanded it a bit with rough sandpaper,…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena jednego wariantu
Use any floss at least 6" (150 mm) in length. Floss on the Go! Rip, Wrap, Snap, Floss! How to Wrap: Can be Re-used! 1pc Prints in 7 min. 6pc Print in 1 hr.
Wydruk około 0,09 €–0,12 € nettoWstępna wycena jednego wariantu
Here is a set of 10 different reusable zipties. You can print them in place. You do not need TPU, just use PETG. These with the lower amount of peaks are more flexible. Have fun with it.
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
No supports needed, print it in 0.20mm in PLA, available in 3 sizes tiny medium big You can scale it to make it bigger (photo shows medium and big) A regular version is available for the box/carton, but you can also print the version with…
Wydruk około 1,05 €–1,28 € nettoWstępna wycena jednego wariantu
I made this model because my partner loves gardening, and hates single use plastics. It drove me crazy that one of the easiest ways to start seeds is in those awful thin plastic cups that pretty much get destroyed after one use. This…
Wydruk około 1,80 €–2,20 € nettoWstępna wycena jednego wariantu
Please see my updated model @ https://www.printables.com/model/162440-inland-reusable-filament-spool-v2 Created this to minimize filament and shorten print time. Can be used on rack or roller style spool holders. There are 2 versions of…
Wydruk około 4,06 €–4,97 € nettoWstępna wycena jednego wariantu
This is a remix of a model with a space for the cable to charge your phone without you having to see it.
Wydruk około 6,57 €–8,03 € nettoWstępna wycena jednego wariantu
No supports necessary. Holds 2 sized straws 6x smaller straws: 6mm diameter 6x larger straws: 7.5mm diameter + 2 hooks for brushes.
Wydruk około 2,89 €–3,53 € nettoWstępna wycena jednego wariantu
Reusable coffee cup sleeve for the Starbucks grande reusable cups. Not dishwasher safe!
Wydruk około 4,50 €–5,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reusable ziptie cable organizer in various sizes. Perfectly flexible from PLA. Material saving. Only 0,7g for 100mm or 1,4g for 220mm. I printed it on MINI+ with 0,4mm nozzle and PLA. Print info Ziptie needs to be printed with 100%…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
This reusable zip tie set is designed for PLA and can be opened and reused multiple times without breaking ♻ ⚡ Each zip tie uses only ~0,7g of material and takes about 4 minutes to print, making it fast and efficient to produce. 🔧 Perfect…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Holds a stack of wide mouth reusable lids for mason jars (not the rings and sealing lids for canning, it probably does hold them just fine but I designed this specifically for the reusable screw on lids that you'd use for like the fridge…
Wydruk około 2,91 €–3,56 € nettoWstępna wycena jednego wariantu
I built this model so that it requires no supports, and can be easily printed without any supervision. Just print the two halves (they're symmetrical so doesn't matter if you print one or both at the same time), drop them into the…
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
This clip can be screwed to a wall and locks cables precisely. The parametric FreeCad file enables you to print this clip for any number of cables you want. Included are ready to print files for 3 and 5 cables. Petg, 30% infill.
Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Reusable spools are great! That is, until you end up with a small amount of filament left over. With a large model, I prefer to use a fresh spool of one colour - what do you do with the leftover ~200g of material? Enter - the mini…
Wydruk około 6,23 €–7,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A super easy and quick to print label - reusable in endless situations This label has a scalable design if you want a specific dimension !!!
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Faced with a common household dilemma, we found ourselves out of tissues at a time when everyone had a running nose. In this moment of need, inspiration struck, fueled by our family's affection for Shaun the Sheep. Within a few hours, we…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu
Personalized Christmas calendar! This is not the classic disposable calendar. You can customize it this for any occasion! (wedding, birthday, Halloween ecc) all year round! Under each day box there is a 35x35x30mm space where you can put…
Wydruk około 1,57 €–1,91 € nettoWstępna wycena jednego wariantu
This reusable filament spool is designed for the environmentally friendly ECOrefill filament . The filament is delivered without a spool, held together with zip ties. The idea is that you print your own reusable spool to help conserve the…
Wydruk około 6,07 €–7,42 € nettoWstępna wycena jednego wariantu
Simple, practical, and easy to print — this reusable bag clip is designed to keep opened food packages tightly sealed and organized. Perfect for chips, pasta, cereal, coffee, frozen food bags, snacks, pet food, and more, this compact…
Wydruk około 0,17 €–0,21 € nettoWstępna wycena jednego wariantu
Printing Layer Height 0.20mm or lower No supports needed Material: TPU and PLA (I used a mat PLA but most types should work) Perimeters: The TPU part 4 or more others can be juist 2 Assembly/Installation begin by pushing in the TPU part…
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
It requies some little file work to match correctly base-heads. Sliced with Cura 5.6.0. Supports needed.
Wydruk około 2,11 €–2,58 € nettoWstępna wycena jednego wariantu
I made this to organize my USB Novas. You can edit the OpenSCAD file to change the size(s) and layout. I exported a USB-A and USB-C version. But keep in mind that I made these specifically for my own products. These are not…
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
To assemble the box you need 6pcs of M3 30mm screws. Simple printing. Wide use of the box
Wydruk około 0,69 €–0,84 € nettoWstępna wycena jednego wariantu
Write the name on it with marker.
Wydruk około 0,15 €–0,18 € nettoWstępna wycena jednego wariantu
Ant bait station for use with Terro Liquid Ant Killer or equivalent. Open top for visibility and easy refill. Handle for easy placement and disposal.
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
Sometimes you have left over tuna or water chestnuts and don't use the whole can. Print one of these in PETG (dish washer safe) and it snaps easily onto the can. Extended flanges on two sides make it easy to remove. Rated disposable…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two sizes of the bottom part: the height of the lower box is 50 mm, the height of the higher box is 70 mm.
Wydruk około 5,57 €–6,81 € nettoWstępna wycena jednego wariantu
Simply cut out a sponge and wet it with a little stamp ink. You can edit the StampCustomize.f3d file to create your own customised stamp. The stamp and the handle can be printed without supports. The cap works better with supports.
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
I suggest keeping the threads printing at 0.2mm on both the nut and bolts. other sections of the model can be printed with 0.3 layer height. I also removed the bottom layers and used a brim to limit the warping on the model base. There…
Wydruk około 2,15 €–2,63 € nettoWstępna wycena jednego wariantu
Overview: Tired of 2L soda bottles collapsing and crinkling in your self-watering pet bowl? DriftJug mini is the sturdy, reusable solution that won’t deform, leak, or look terrible over time. Designed to keep water flowing smoothly for…
Wydruk około 6,41 €–7,83 € nettoWstępna wycena jednego wariantu
Food waste is a massive problem, with the BagClippie you can combat non-resalable bags to prevent your favourite snacks going bad in your kitchen. One third of food produced globally lands up in people's bins, This reduces Food security…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena jednego wariantu
This nametag take advantage of many of PrusaSlicer's options such as color change and modifier block to get the infill visible. PrusaSlicer projectfile is included. Fusion 360 file is included to change to a name you prefer:)
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Just tall enough for standard metal straws 8.5" and longer (we have some 12"). Girlfriend wanted a doll-holder straw stand for the cabinet that she can pull straws out the side (instead of on top). So he had me make this. Enjoy!! I…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
This magnetic drying mount is designed to hold reusable cotton pads while they dry. It features built-in slots for 5x5x5mm square magnets, allowing easy attachment to metal surfaces like bathroom radiators or other convenient spots.…
Wydruk około 1,50 €–1,84 € nettoWstępna wycena jednego wariantu
Whether you're piping rosettes, swirls, meringhe, borders or classic star tips, this nozzle offers an alternative to disposable or metal tips; easy to clean and reuse. Features: Produces star shapes Easy to print, no supports needed Great…
Wydruk około 0,24 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design improves the original Bambu Lab reusable spool holder in the following ways: Allows you to see how much filament is left on the spool and uses less filament to print the spool due to the hexagon pattern on the sides. Also, the…
Support the Creator If you'd like to sell this model as part of your business, please consider supporting my work by purchasing a licensed version here: Licensed Model on Patreon Latest Update – 4/1/25 Thanks to the awesome feedback from…
Print with PETG Z=0,2 ON MK3, MK4 you can print 24 pcs at once. Designed that Size fits to be printed on MINI too. If you have problems with detach zip ties from the bed, you can use:…
“v2” version has no label area in case you want to save even more filament. Otherwise, print the “v3” versions. The original Bambu Lab spool holder works well but takes a lot of filament and is missing a few nice features, such as being…
If you'd like to sell my model for your own business, please consider supporting me and acquiring a licensed version of the model here: Licensed Model on Patreon If you like this model, please consider printing the full sized semirobot…
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. Print Instructions: Infill: 15% Layer…
I have combined the best features (in my opinion) of three previous remixes of the Bambu Lab spool. I started with the refactored “Bambu X1 Re-Usable Spool” as a base, then added the best features of the “Improved Bambu Lab Reusable Spool…
Cutlery Kit Card – Knife, Fork and Spoon. A compact cutlery kit card combining a fork, spoon and (child-safe knife) in a single, lightweight design. Created with a focus on comfort, compactness, and fast printing . The card format keeps…
This mini mixing pad is designed for fast, mess-free glue and epoxy work. It features a built-in snap-off mixer and a smooth, disposable surface ideal for small repairs, woodworking, crafts, and general workshop use. Prints flat, no…
This is a print inspired by the funko pop figurines. It has the exact dimensions of a male funko pop, ready for your customisation. You may need to scale it up to 2700% to get a realistic size. I recommend printing it upside down for…
UPDATES: 2023-01-19: Added the option to change the total height of the hook and save space. The parameters will automatically calculate home many vertical hooks are needed. The hook is placed at lower ¼ of height. 2022-10-14: Fixed the…
I was about to make the beloved hex scraper (since the one that came preloaded on my X1C was kinda garbage) but I thought to myself why should I print a nice scraper if I'll have to print a full one again every time the blade goes bad.…
Giant Vase Spider - posable halloween print in vase mode! Big size (40cm and up to 90cm), nice finish, low material (only around 110g) and low time! If you like it --> press like it :-) License & Usage Free to download Private use only If…
PLEASE LIKE COMMENT POST YOUR MAKES. THANKS! This is my gen 4 print-in-place joint design. My previous designs, with a screw, allowed full ball joint motion but: was sometimes difficult to print because the screw is so small the thin…
The Polymaker Reusable Master Spool is a durable, empty spool designed to hold refill filament coils sold without disposable plastic spools. It allows users to reuse the same spool multiple times , reducing plastic waste and shipping…
This floral lampshade is easy to print and assemble. Designed to be compatible with an IKEA Hemma socket, this lampshade makes for a striking overhead light or can be easily set up as a tabletop accent light. Every petal in the lampshade…
Popular hexagonal scraper - now for defrosting car windows You can choose between a regular version of the scraper (which is in one piece) and a version with replaceable "blades". Both modified to make the scraper stronger and to allow…
It’s my Reddit cake day, and I’m finally sharing something I’ve been using for almost a year : my custom-designed, reusable TPU cable ties . After trying dozens of designs, none of them quite hit the mark. I wanted a cable tie that: stays…
An OpenSCAD script to generate a customisable back horn speaker enclosure. It can be customised to suit different overall dimensions, different drivers (up to two), and different side fixings. It also has a customisable space for…
COMPATIBLE WITH AMS! Are you a beginner 3D printing enthusiast or a seasoned professional? Are you looking for a way to reduce the amount of leftover spools after using filament? Or are you wondering how to minimize waste after 3D…
LockSpool V3 is a reusable filament spool made from a single part printed twice, and joined together with a quick twist, with a snap-lock to hold it in place. The design can be customized to fit any spool-less filament refill coil by…
They're easy, they're cheap and they can be a lot of fun: disposable cameras. If you still got one around, you can remove the plastic lens from the camera housing and print a lens holder for a Sony E-mount camera. All you need is a bit of…
When I printed the “Bambu Lab Reusable Spool Holder Hex Remix”, I noticed that the printer is kinda bit violent on some sections and upon inspecting I noticed that the STL object doesn't have a proper arc. I also noticed that the print…
This customizable posable penguin makes for a festive fidget toy. https://youtu.be/M_sV88fGf2U Printing All parts can be printed without supports. Add brims if curling is an issue - especially the smaller pieces. Base and middle sections…
You like a clean look and hexagons? This is the place for you :) --- Features & Changes fully compatible and dimensionally identical with original spools removed material for faster and resource friendly printing there are no supports…
The TPU Cable Tie Set is a fully 3D printable, reusable cable management solution designed specifically for flexible filaments like TPU. This set includes five different sizes: 6 cm, 9 cm, 12 cm, 16 cm, and 20 cm , making it perfect for…
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
This thing is a great example of something useful you can do with your printer. It allows you to hang any broom or rake like object using a convenient click in, click out latch. This youtube video shows and example of one in action…
Update 11102022: DOWNLOAD NEW Infill Pattern file, since old one could break more easily. On the spool with infill pattern, I noticed the infill section could “pop out” - Added a “wedge” to make it more embedded. Seems like to two parts,…
If you want to print dummy 13 in 500% scale it is good start to test your printer\filament. This model has print-in-place fingers (500% scale is not easy to assemble) Modified finger joints (added fuzzy skin for better grip) Palm-finger…
A motorcycle or racing helmet with optional visor. The visor can be opened or closed. You should be able to print the helmet without support if your bridges are good. It might need a little post processing if you get sagging filament on…
This is an OpenSCAD model that is designed to be used with OpenSCAD's customizer facility. Width, depth, height, thickness and corner radius are all fully customisable using OpenSCAD's customizer facility. See: openscad.org for more…
I'm working on a 500% scale version of Lucky. The goal is to add details, improvments and my personal touch without change the main design. This is my remix for the hands fingers and palms printed with 10% infill and works great imo The…
This is a funnel designed to work perfectly with Resin Filters from 3DMaterials (https://www.3dmaterials.com/sub/resins.php?ptype=view&prdcode=2109150011&catcode=10000000&page=1&catcode=10000000&searchopt=&searchkey= ) print with no…
Loved the version 3 and 7 posted by MediaMan3D. They do work well with the V-Spooler from Fryby Additive. https://makerworld.com/en/models/98832 and https://www.printables.com/model/684376 But I needed to adapt it to work with the…
Here is another mod for the amazing soozafone model No supports needed Download all other parts from his link
These are remixed posable hands for Easy 13. I used designs from 2 other models to create an updated file for Easy 13. The smaller the hands the less chance the design will function as it should. Print at 200% or higher for better…
I wanted a small, simple shaped concrete planter and I was inspired by some great 3d printed planter mold designs out there. This was modeled from scratch and prints without supports. I've reused the same mold multiple times without…
Highly articulated 3d-printable action figure. The SUBSTRATUM PROTOBODY girl is a base figure utilising the SUBSTR joint system. This joint system allows for easy interchanging of parts and the vast possibility of creating different…
Simple easy print storage boxes, print great on 0.4mm nozzles. Made in openscad and fully customizable(comments in code). Use recycled pop bottle lids to reduce waste(a printable lid is included in case needed). This have a very good seal…
Remix of the original Bambu Lab reusable spool. Reduced the material used for the side walls to a minimum while keeping overall strength and rigidity resulting in ~20-25% less print time and material usage. With the open design you can…
***********V2 NOW AVAILABLE*********** Reusable Cable Tie / Zip Tie - Easy to use This easy-to-use cable tie is perfect for organizing and securing your cables. It ensures your cables stay neatly in place or within a bundle, whether under…
EN: Since I wanted to construct various holders and test them before printing, I created the hole pattern of the Skadis walls from Ikea as a step file. V2→ Now as a composable version for larger areas Da ich mir diverse Halter…
Collapsable fidget Santa's hat. A cool Christmas decoration. It looks nice and is fun to play with. It's very easy to print. No supports, etc. When you print the hat in red, you should change the color to white on layer 106. Unless you…
15-JAN-2024: Added model with a flared gap
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
The ELEGOO filament spools are made of pressed cardboard, which is abrasive, has low friction, and creates a lot of dust when printing, so I adapted the project that was created for Prusament refill filament to fit the disassembled ELEGOO…
May i introduce Flossy, the floss holder. I was tired of using long pieces of dental floss to be able to hold it while using. So i designed a easy to print and simple to use dental floss holder, where you can easily wrap around a 10cm…
A Semi-Posable Flexi FaceHugger.
parts size adjusted for easier storage
Hey everyone! Exciting news – we've just launched the AnkerMake Model Platform. Here, you can access models designed by AnkerMake users themselves, as well as our latest official designs. What's more, we're currently running a model…
Remix of bread cutting guide at https://www.thingiverse.com/thing:2794539 with 2mm notches/grooves added to prevent knife teeth from scraping plastic bits that would contaminate the bread. This is a bread slicer that can be disassembled…
Just a simple posable action figure.
I printed up OneIdMONstr's amazing flexi-facehugger, and was indeed amazed - it is a superb model. But it was a bit too floppy to be entirely intimidating. So, time for a little bit of a mechanical remix...! I scaled the model up,…
Yeah, there's like 30 different versions of the X1 reusable spool already. But this one is stripped down to the bare minimum for speed and material efficiency. With the same slicing settings, it uses 15% less material and takes 34% less…
This isn't exactly a remix of MediaMan's model. I noticed that model didn't lock quite as well as the current model from Bambu's website. Also - the spool ID wasn't the same as Bambu's spools by a few mm, which meant that it didn't work…
Hi, I made this adapter to use the refill filament from esun on the Bambu refill spools, made these with snug tolerances so when using the AMS the filament doesn't spin freely and cause an issue. Edit: Added a new version that allows you…
Note. You have to salvage a lens from a disposable camera. The one I used is from a Kodak fun saver Update v.1.2: Added a knob to lock the focus and adjusted some dimensions. Find a small screw, glue it to the knob and drill out the hole…
