1053 modeli
Dosen Insektenschutz - Can insect protection - Wasp protection - Can Protection - Dosenverschluss - insect screen - wasp
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
TWO SIZES NOW INCLUDED. Drink holder + phone stand + remote holder for any large/wide sectional or couch armrest or back of the couch. The non-remote side is easily narrow enough to go between your sofa and the wall). I know that it fits…
Wydruk około 16,29 €–19,91 € nettoWstępna wycena jednego wariantu
[EN} Anatomically-correct model of an Esperanza bug. Legs were modeled thicker for printability. I recommend using brims to help legs adhesion to the print bed. .3mf file includes paint-on support to limit support on overhangs. If you're…
Wydruk około 2,76 €–3,38 € nettoWstępna wycena jednego wariantu
Pass Through V2 Wargames Wall - Section 8 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 9,24 €–11,30 € nettoWstępna wycena jednego wariantu
Wargames Wall Damaged-1 - Section 10 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Wydruk około 8,09 €–9,89 € nettoWstępna wycena jednego wariantu
Pass Through Armoured Wargames Wall - Section 6 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Wydruk około 7,11 €–8,69 € nettoWstępna wycena jednego wariantu
Nose section reinforcement (optional) For engines with high power / high torque, I designed a reinforcement for the nose area. It is glued in with epoxy resin. It is primarily intended for LW-PLA fuselages. Print this in PETG. Verstärkung…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Armoured Wargame Walls Sections - Section 4 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wydruk około 5,14 €–6,28 € nettoWstępna wycena jednego wariantu
This was one of my first attempts at using 3d printing to solve a problem. With basic Tinkercad knowledge I managed to produce an almost exact replica of the broken piece on the end of the broom handle. The external dimension is 23.5mm…
Wydruk około 1,14 €–1,39 € nettoWstępna wycena jednego wariantu
This part is intended to be installed between the top cover and the vent cover of the Prusa Core One. It acts as a barrier to prevent insects, which are attracted to heat or light, from entering the printer. I designed it to use minimal…
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Fresh water without insect escape. Cut “U” Shape (9x10mm) on sales box, insert dish and add water. The holes at the bottom are very small (2x1mm), so there is no risk of insects escaping (except for the smallest sizes). Print settings:…
Wydruk około 0,15 €–0,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The cheap insect screens are mounted with only a Velcro strip. It is helpful to use such a tool, with which the net can be pressed into the nubs of the Velcro strip. CAD Design…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
this model will test stringing, accuracy and acceleration control. i put my mk4 at a big disadvantage by using wet filament and pushing the speed limits
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
Źródło oznaczyło ten model jako treść 18+.
Update: I've uploaded new PrusaSlicer 3MF and GCODE files (look for “New settings” in the file names). These keep the hot end at 190C and use other techniques to cool the filament, so it's less likely to clog. I made a few other changes,…
I tried to make the “sliding section fidget cube thingy” that had a few versions pop up lately… but i wanted it to be parametric. attached is a FUSION 360 file for you to mess around with and get custom sizes! NOW IN KEYCHAIN SIZE! (note…
Want to support my work and even sell 3D prints of some of my designs? Check the following links. Patreon: http://www.patreon.com/flowalistik Donations: http://www.paypal.me/flowalistik --- E3D V6 hotend section to show how a hotend…
Simple little bin that's great for storing long, skinny, things, like precision screwdrivers, xacto knives, pens, tweezers, paint brushes, etc. Overall dimensions: 120 x 77.6mm Each section is 28(w) x 46(d) x 74.6(h)mm Uses the 4mm…
This design is a streamlined, slanted 5 segmented container(4 back and 1 large front), tailored for the Ikea Skadis board. The dimensions are 230mm in length by 115mm in width, with a height of 120mm sloping down to 50mm at the front. the…
Remixed from m*bergman's excellent Stryker lineup, which is in real life a remix of the GDLS LAV 3. The LAV 6 ISC is the latest in-service version of the mowag piranha lineup, which entered service in 1974. (…
Powerful 3D printed rhino beetle table lamp — a striking insect-art night light for desk, shelf or collector decor. Fits the tBulb B dimmable USB LED module. id : se10085495 size : 230X270X168mm files : 5 pieces : 18 maximum size of the…
EccentricToast's model is amazing, but it didn't have enough sections, so I simply added a divider down the middle. I also included the original .3mf's for convenience, and both a .3mf and a .stl for the bottom. Blank top with no logo…
Bowling ball Layout Tool “prosect style” Made to measure bowling ball layouts for finger drilling. Measurement increments in 1/8 inch, for 1/16 go between the lines.
A little less boxy style pen/pencil holder to attach to your IKEA Skadis pegboard. Comes in 3 version with 2 and 3 dividers. Requires glue or 3DGloop to attach the ‘peg hooks’ to the back. Print without any supports or brim.
Best prints with flexi filament. Models Bat - Blood Evil Earthworm - Slime Terror Spiders - Nightmare Web, Deathweaver, Shadow Biter Grub - Skull Worm Centipede - Swamp Treader Cockroach - Dark Dweller Gecko - Gloom Lizard Scorpio - Hell…
This deep bin has the top edge on one side cut so it can be placed in the middle section of the packout cases. The big middle bin can now be replaced with two of these. Or use three small bins on one side, and a large open half - like the…
Adapted from: https://www.thingiverse.com/thing:583489 I wanted the print to be in different colors and larger than my printbed so I printed it in parts and then painted it. Ends up I am no good with painting and even though I clamped the…
light leakage cover for the autodarts led ring. its a remix and fixing a small gap in the original model by COY5.
Quick remix of Paul's cool Under Desk Drawers with a hidden keeper so it doesn't pull out too far and a no-holes drawer option . All parts fit in a MK4/3 single print. Twisting keeper allows for less fumbles during assembly while still…
ompact travel bomb-shaped pills holder with 2 compartments , modeled using Fusion360. You can put it on your desk or bring it on the plane with you ✈ (i'm joking! eheh)
5-6 color print of the Earth with stand and x-section cut away Based off this Thing - Multi-Color World with Stand Space in the base to glue in this style magnet Print instructions Based off this Thing - Multi-Color World with Stand…
Industrial Wargames Wall - Section 1 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
🇮🇹 Architectural Wonder This model was created by Logan MDR The original MiniWorld3D Florence Cathedral model has been one of the most popular ones for many years – here is a fresh new approach, sure to catch the attention of both…
A model showcasing the differences between healthy bone and bone that has lost some of its density through osteoporosis or time in space without enough exercise as a cross-section. The models are slightly zoomed-in compared to the actual…
This is the Star Trek Section 31 Stealth Ship seen in Star Trek Discovery show. The model was designed by me in a way that the single parts can easily be printed and that you don't need to paint the model. Some of the parts can also be…
The model allows for the insects/arachnids/… to stand onto little pads and to drink the water that flows through the channels around them. The water comes from a bottle reservoir that automatically replenished the channels, just fill the…
All 676 combinations of intersecting letter pairs from A to Z. Find your initials! Inspired by my other intersecting illusions ( WP , C2 , I Love Us/Olive Us , Hello World ), I wanted to create a full set that anyone could start with. 😎…
COOKIE CUTTER - PLAYDOH - KINETIC SAND - CLAY - STAMP - TOY BAKING: 🍪 Perfect for: ✨ Sugar cookies 🧑🍳 Gingerbread 🍂 Shortbread Pro Tip: 🪄 Lightly flour edges for clean releases every time! CRAFTS & PLAY: 🧩 Shape clay, playdoh, or kinetic…
The LAV III Kodiak is a GDLS development of the Mowag Piranha initially introduced in 1974. This lav 3 is a remix of the excellent m bergman's Stryker vehicle lineup, which is itself in real life a remix of the GDLS LAV 3 lineup! I've…
One day pill box with 3 sections including morning, afternoon and evening Printed on Ender 3 v2 neo 20% Infill and No Supports
I was able to remix of the beer bottle helmet for FDM printing ( https://www.printables.com/model/236264-beer-bottle-helmet-insect-protection-bierflaschenh ) and I love the design, Now I was faced with the ban of glass bottles on my…
Have removed the central section of jamundsen's model ( https://www.thingiverse.com/thing:459709 ) to make it more screen accurate. Supports are not needed for this model, I'd suggest printing slow towards the top. Use a 10mm brim for…
Hier eine Bienen-/Insektentränke mit einem Marmeladenglas, da mir die Flaschenvarianten zu wackelig erscheinen. Das passende Glas hat eine Öffnung von ca. 77,5 mm - diese gibt es ja in unterschiedlichen Höhen, siehe Fotos. Gedruckt habe…
Gridfinity Divided Bin 2x3x3 2 Large 4 Small Sections.
Is it possible to improve the honeycomb infill pattern? Many slicers have one or two types of honeycomb infill patterns. But none like this 😊. This pattern is made from single non non-intersecting walls and without bridging! It also…
This is an overlay tile replacement for the board game Gloomhaven. Three versions available: normal and distressed versions with and without rubble on top. Tile Count: 6 Print instructions Supports: No Resolution: 0.100mm Infill: 20%…
Due to the heigh permittable in the K2 Plus, I've made a chamber section that is double the height. From the original you will still need to get 7 of the cmag mesh files, so please support thrutheframe by visiting the original page to…
Electric Grid Wargames Wall Sections - Section 2 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get…
Wargame Walls Fan Room Version 2 Section 15 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
4 way intersection for Brio and Ikea LILLABO wooden train. Print-in-Place to make the intersection rotatable. Print settings: 0.2mm layer height slow down bridges and turn on fan (100%) PLA/PETG All credits go to LocoRico for that great…
This quick remix of nimel's great Clamp-It Clips adds: 3-way intersection for 3/4 inch boards 4-way intersection for 3/4 inch boards Slightly rounded facing corners to make it easier and cleaner to fit the clamps in place view-holes so…
Every design requires time and expertise. My print settings: Printing method: FDM (Fused Deposition Modeling) Material: PETG Layer height: 0.2 mm Nozzle: 0.4 mm Orientation: logo on the print bed Infill: 50% Wall thickness: 1.2 mm (3…
Over a meter tall model of Nelson's flagship. Easily printable model with few organic supports with layers of 0.1 and 0.15 To make the rigging I used 1.5mm modeling rope and a thinner one for the linkage. To create the upper meshes of the…
This model is compatible with the lego system.
Rex - Rollback Rear Section - 1:8 scale 6x6 Read Carefully! - Rex is a modular truck system - This post is for the rollback section. More option to come - All the STL files you need to build the rollback truck is here free on…
This is a ball and socket LED lamp than can be positioned in any direction. The part that holds the LEDs accommodates strips whose sections measure 10mm x 50mm (5050). Two sections are used for this lamp so it is a strip that measures…
THE THREE-SECTION CONNECTOR ALLOWS THREE TUBES TO BE CONNECTED INTO A STRONG CONSTRUCTION
Remix of the following designs: https://www.printables.com/model/255855-brio-compatible-standard-h-cross-track by @PrintATrain https://www.printables.com/model/329413-brio-wooden-train-tunnel by @Daniel_5163…
Simple, capacious (12 x 12 x 12 cm), 4 sections organizer for cotton buds and pads. To fight the mess in your bathroom :) I also attached some optional covers. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
this a lego train track intersection [for legos only not duplo] I hope it helps you will need to break off the little tabs at the end of each rail print setting supports:no infill:15% filament:pla printer:prusa mk4
Wargame Walls Barricades Section 12 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
I was missing some of the Garage slats , so i reconstructed them. Please note, they are not compatible with the original ones, So you must allways use the original OR mine, you cannot mix them. Print as many as you wish. You need to print…
Credit to https://www.printables.com/@nleinad and https://www.printables.com/@QuentinL_4378541 for the originals. Here I have added some sectional threaded baffles. The idea was to have a separate printable section so you could add as…
I had a hard time printing the filtered base in PETG, as it didnt like the tiny holes. I opted to redesign that part to have slots instead. it now resembles more of a floor drain design and should be easier to print in PETG.
This is a replacement or addition section for Glow Tracks. If you want to add some more sections to your existing Track, or to replace some missing parts, this is the way to go! I made a model with custom supports to provide a perfect fit…
Rail section off of https://www.thingiverse.com/thing:5332248 Category: 3D Printer Accessories
Inside and Outside Corners Wargames Wall Sections - Section 3 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your…
Sta Trek Discovery Badge for Section 31. Print it at 150% for hand badge (Section 31 really never use the badge in the uniform) Print it standing in two colors, then join the parts.
I wanted to make a food dish for my crabs that had different sections so I can see what they like. They really love popcorn so I made the center section as a kind of treat section and then the other main sections for hardier foods. I…
Upload of my project from thingiverse since thingiverse has become trash! Preface Decided it would be a bad idea (in the best way) to make a plastic Dual Sector Gear (DSG) for my gel blaster because why not? Anyway, this is by no means…
I have been working at 0.28mm layer heights for quicker print times, and slow prints with DarkWing Dad's slicer mods, but was still suffering with furthest corners lifting during longer print runs. If I went back to 0.20mm, I was looking…
pencil cup (v2!!) my sister needed a pencil cup so I decided to make a variation of my gridfinity tray into one. like that, this has an outer, gridfinity-compatible base, and three removable inner cups. the two smaller internal cups are…
If you want, you can support my project on PayPal . I am very grateful for every small donate :) Thank you! The list of material for the different variants can be found at the very end of the description! Just scroll down! Descpription:…
Train Track Intersection IKEA/BRIO TrainTrackIntersection_v2 is a better fit. Category: Other
This model is compatible with the lego system.
In need of a sector gear delayer chip for a new high-speed build using SHS gears I needed a sector gear delay chip which no shop in the area had in stock, so naturally I designed and printed one myself. Print this in a sturdy material for…
You should print 6 of the disks, 3 of the tubes, and 4 of the plugs. Then assemble them onto an EEW 6.x bobbin. The plugs get inserted to hold these from spinning on the bobbin. Then you can spin small amounts of different singles onto a…
I also added a blanco cover so feel free to desgin your own covers.
Wargame Walls Fan Room Section 14 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the…
Insect Glaive from Monster Hunter World Finally done with my Insect Glaive. Files have been uploaded to Thingivers and are available in the original location. Code Available Here: https://bit.ly/InsectGlaive Fusion 360 Link:…
My mod for “ Under Desk Drawer by Paul ” the same mounting holes.
Wargame Walls Wrecked Barrels Section 18 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in…
Wargame Walls Pump Section 11 Because the fight goes on in the deep dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part citizen! Print these out today! Show your worth! Get back in the fight!…
Gridfinity Divided Bin 2x4x3 Off Center 2 Sections.
Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.
About: Magnetic HEPA filter for the X1C which attaches to the exhaust fan in the back. This almost el i minates the PLA/PETG smell as well as making the fan significantly more quiet. This model has an index point for the proper alignment…
These are a series of walls i designed to work with and compatible with Dutchmogul's delving decor dungeon walls they connect to them but not perfect. when i made thess back in june there were not many options for cave walls so i made…
First model uploaded. I couldn't find a mail holder I liked with enough slots or that needed to not be secured to anything. So I made this on Onshape. Slicer was Creality Print. Printed on a K1C at 50% infill, high quality .25 and slow…
Picked up model from mathhappens.org and used Tinkercad to add text. Printed on white Anycubic PLA and used black acrylic color
Gridfinity Divided Bin 2x4x3 2 Large 4 Small Sections.
This model is compatible with the lego system.
If bees fall into your paddling pool then this raft provides a place to climb on and dry before flying off. Printed in PETG. A modifier is used to remove the top and bottom layer in the center section, generating the pattern. 10% infill…
This piece links up to existing Lego tracks. To secure this piece to existing track, I used 1x2 plates on either side of the railroad ties.
Square Overlapping Ventilation Grille with Insect Net - Collection - Upgrade your outdoor ventilation system with our robust Square Ventilation Grille , featuring an overlap profile and a built-in insect net. Engineered for exterior…
Thin board cut into 4 pieces with box. Requires super gluing of black black tiles onto the board. Fits on ender 3 print bed. Chess pieces in picture are the spiral chess set at 60%: https://www.thingiverse.com/thing:470700 Category: Chess
Print with supports to achieve best fit of the interface between sections. The photo shows the similarity between the part 3d printed in white PLA, and the original that was used for inspiration in grey.
Designed for 20mm x 20mm box section tube often used for the x-axis gantry beam on corexy printers. Some tubes have relatively wide dimensional tolerances due, for example titanium tube might be 20mm +/- 0.3 mm - so anywhere from 19.7 to…
