3473 modeli
This HDD / SSD Caddy Is fully funtional. It clicks in perfectly. It also shows the lights of the drive status. Compatibility It works on a HP Proliant DL360 G7 Server (Tested) but should also work on any HP Servers that use the same Caddy…
Wydruk około 1,45 €–1,77 € nettoWstępna wycena jednego wariantu
Gary Wilson Jr. (named by GF) designed for Project “Cocktail mixer”: intended for 6 mm PTFE-Tube (might also work for smaller an up to 7-8 mm) -controlled by Micro Server 9g (SG90) printed in regular PLA Since I´m still working on a…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Things were getting a bit hot behind my home-lab rack, so I figured additional cooling was needed. I slammed together the geometry of 3 of @KennyVerhoeve_588554 's blanking plates in order to get the requisite size, made some holes to…
Wydruk około 5,21 €–6,37 € nettoWstępna wycena jednego wariantu
Think I'm Awesome? ~ https://buymeacoffee.com/triplegworkshop 🏆 To celebrate the win I've added Low-Profile Legs that reduce the height 5cm! 🎆 It's Lazy Susan Mode!! 🍰 MMmmmmm This is purpose-built to make icing a breeze. Retaining rings…
Wydruk około 0,19 €–0,24 € nettoWstępna wycena jednego wariantu
Toilet paper dispenser with a box for wet TP and a drawer for tampons or other toiletries. Improved version.
Wydruk około 14,23 €–17,39 € nettoWstępna wycena jednego wariantu
odd→ssd bay can use original front pannel
Wydruk około 2,21 €–2,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This 1x1 gridfinity module holds a stack of 20 6x2 magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray. You can operate the magnet server with one hand. There are interior compartments, but if you…
Wydruk około 0,38 €–0,47 € nettoWstępna wycena jednego wariantu
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: Start with White, then Blue. Quick Guide to changing filament~ Have some paper to push…
Wydruk około 3,09 €–3,78 € nettoWstępna wycena jednego wariantu
Full Collection: https://www.printables.com/@TripleGWorkshop/collections/673389 ------------------------------------------------------ Color order: White, Blue, Red. Quick Guide to changing filament~ Have some paper to push away extruded…
Wydruk około 4,48 €–5,47 € nettoWstępna wycena jednego wariantu
Service Key (elevator, maintenance room, electrical box, fireman ladder) a key with Insert Bit : Square : 6mm, 7mm, 8mm Rectangle : 6x9 mm Triangle : 9, 11, 14 square (female) : 6, 7, 8
Wydruk około 0,61 €–0,75 € nettoWstępna wycena jednego wariantu
H0 1:87 Model Train Service Port “Lokliege”. You get a single 245mm width or five connectable sizes (100mm, 150mm, 200mm, 225mm, 240mm) to build the width you prefer. It will fit at least all H0 1:87 model trains but maybe usable for…
Wydruk około 3,38 €–4,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hope brake calliper servicing tools consist of two bleeding blocks and a tool to release each individual piston one at a time for lubricating. The tools will suit Hope V4, E4 and RX4 callipers. Printing Information 0.2mm layer height…
Wydruk około 1,24 €–1,52 € nettoWstępna wycena jednego wariantu
This file is a more rigid servo arm for the Rancher. The Rancher itself is NOT part of this assembly! If you want to print the Rancher, you will need files from third party as well. Files can be found at 3dsets.com. The Rancher has 4x4…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Epaisseur 5 mm Hauteur 7/8 cm Diamètre du trou 4 cm
Wydruk około 0,20 €–0,25 € nettoWstępna wycena jednego wariantu
This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
EDIT: Added 2 example pics with glass to demonstrate the hidden tank and the smaller tank auto-filling. I love my various ISO Stations and used similar plastic containers in college labs, but that was a long, long time ago.....and I have…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
i wanted an angle to mount my Patchpanel and switch on the wall and save some space. it was designed for 19" Server Rack Mounts the holes for the server mount are eccentric so if it didn't fit switch left and right angle i need per angle…
Wydruk około 2,64 €–3,23 € nettoWstępna wycena jednego wariantu
I needed an easy way to hold a DIN rail to the side of my NavePoint 15U wall mount open frame server rack. These parts allow you to mount the DIN rail on the side of the rack with a slotted endcap to help adjust for a variable length rail.
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
Timeless parametric (many sizes) model of various étagères to choose from. A perfect addition to the nutcracker model (which is also nice and easy to print). - highly print-optimized. - each form ca be easily split in slicer to remove the…
Wydruk około 3,82 €–4,67 € nettoWstępna wycena jednego wariantu
Of course there are countless VW logos out there but all are only STL files and thus not really adaptable. This is different. I traced the SVG files more or less by hand from bitmaps and they are clean so OpenSCAD can use them without a…
Wydruk około 1,01 €–1,23 € nettoWstępna wycena jednego wariantu
With this tool, the oil change can finally be done without a big mess. Simply loosen the drain plug of the oil filter a little with a ratchet, then completely unscrew the screw with the printed special tool. The oil is completely…
Wydruk około 2,74 €–3,35 € nettoWstępna wycena jednego wariantu
Support for coreboxx premium version mmu3 service hatch in order to make sure that the plexiglass doesn't break. Mount with 4 M3x18mm screws with 4 M3 Washers and 4 M3 selfsecuring Nuts to the coreboxx.
Wydruk około 1,00 €–1,23 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Star Wars Service Droid - FLO like -WA-7
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Dieser Serviettenring wird in zwei Teilen gedruckt und anschließend an der vorgesehene Vorrichtung zusammengedrückt. Für besseren halt kann man die teile mit ein tropfen Sekunden Kleber zusammenkleben.
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Il s'agit d'un petit chevalet “réservé” pour les restaurateurs notamment. vous pouvez vous en servir pour le poser sur une table pour signaler que la table est réservée. Dimensions du model: 6cm de long ; 3cm de haut et de large Très…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena jednego wariantu
This is a lightweight servo mount for 5 gram servos. I designed it specifically to fit EMAX ES9052MD, but I can confirm it fits Flite Test PP A 5g servos just as well and probably most other 5g servos. Printing: 0.2mm layer height or…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena jednego wariantu
This 1x2 Gridfinity module holds a stack of 40 6x2mm magnets inside. Roll the thumbwheel and one magnet at a time is delivered to the top tray, always in the same polarity. You can operate the magnet server with one hand. There are…
Wydruk około 0,18 €–0,22 € nettoWstępna wycena jednego wariantu
Little Green Army Women : Forward Observer. Pairs Nicely with This model in Myclub
Wydruk około 3,42 €–4,18 € nettoWstępna wycena jednego wariantu
This is a case for holding half a deck of SERVD cards with a quick access, push out style card dispenser on the back for “Not Today Satan” Cards and “The Yeh Nah Card”. I designed it so that as use cards the elastic/rubber band holds less…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
Compatible with this Govee thermometer or any other device that fits in the basket hole:66x21.5mm
Wydruk około 1,69 €–2,07 € nettoWstępna wycena jednego wariantu
This model is an insert for flowerpots that lift your plant, ideal to create a water reservoir, improve the drainage of your used substrate or levelling your plant in an oversized pot. For smaller size variation feel free to use the…
Wydruk około 0,89 €–1,08 € nettoWstępna wycena jednego wariantu
Always had issues with removing the perlators from the tap to clean them. In the past just used a wrench, but always damaged and scratched them. So I finally decided to design a tool for it and print it. Hope you find it usefull. Print…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
It is underground water reservoir for plants. I have been using a similar solution for years. But previously i have used hot glue with real funnel ;-) Now i have 3d printer so i have designed fast to print and cheap version, all in one.…
Wydruk około 1,91 €–2,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Kufic Script Serving Tray or Plate *Roughly translates to “Eat More Peaches” *No it does not. I have no idea what it says… so if you know how to read Arabic Kufic then please let me know if it is NOT COOL. For those interested this…
Wydruk około 6,44 €–7,87 € nettoWstępna wycena jednego wariantu
an axle mount for the steering servo that also adds a 10 mm lift wpl c24 or c14
Wydruk około 1,18 €–1,44 € nettoWstępna wycena jednego wariantu
Simple Holder for Servo motor. Can be attached with M3 srews. Takes about 20 min. to print Weight is around 2g PRINT Best Orientation: Material: PET-G Infill: at least 25% Brim: NO Layer height: 0.2 or 0.15 Supports: Well, I printed…
Wydruk około 0,25 €–0,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Server rack screw and cage nut replacement. I remixed this to for 1.3U items that fit on a standard 19" server rack. This is just the 1.3U Mount you will need the nut from Spartan's Server Rack 1U and 2U Mounts (Screw and Cage Nut…
Wydruk około 1,21 €–1,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This device serves up 6x2mm magnets for use with Gridfinity baseplates and modules. They are always served up in the same orientation so their polarity is always the same. This helps avoid gluing magnets in the wrong orientation. The…
Wydruk około 0,69 €–0,85 € nettoWstępna wycena jednego wariantu
Servoaufnahme, um einen Standardservo zur Ansteuerung der meiner Lenkachsen aufzunehmen. Er wird hinten durch die ersten Anlenkungen der Achsen fixiert, vorne sind zwei Bohungen im Rahmen des Goldhofer erforderlich. Damit wird zugleich…
Wydruk około 1,60 €–1,96 € nettoWstępna wycena jednego wariantu
Even though the Kopp Powerversal power distribution are completely made of plastic (don't get fooled by the aluminum look), they are made extremely well from the electrical standpoint. Additionally, the power sockets have the right angle.…
Wydruk około 2,88 €–3,51 € nettoWstępna wycena jednego wariantu
This is a simple vertical stand for holding an EKWB EK-Quantum Kinetic TBE D5 upright while using it on a workbench or table. It should work with any D5-based EK-Quantum Kinetic pump/reservoir without any issues. Also created a radiator…
Wydruk około 6,76 €–8,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Window size should be the same as the bottom frame layer & should be able to hold it. Use petg for heat-resistance. I cut a hole in the wood a tiny bit smaller than the window, i measured the acrylic would fit in the frame of the 3d…
Wydruk około 6,52 €–7,97 € nettoWstępna wycena jednego wariantu
🍂 Thanksgiving / Harvest Napkin Holder – Bring Cozy Autumn Vibes to Your Table! 🦃✨ This charming napkin holder adds a touch of fall magic to any table setting. Designed with care, it consists of two pieces that easily slot together ,…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die meisten Usb-Sticks lassen sich nur schlecht beschriften. Darum habe ich eine beschriftbare Service-Box entwickelt. Die Schriftschilder können sehr einfach mit dem Prusa Slicer beschriftet werden. Wer lieber Papierschilder verwendet,…
Wydruk około 0,06 €–0,07 € nettoWstępna wycena jednego wariantu
idéal pour les familles nombreuse qui ce batte la place sur le sèche serviette. les cotes sont ceux d'un modèle standard de sèche serviette. modèle renforcer en plus au cas ou vous avez des brutes dans la famille. je vous donne le g-code…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Mounting plate for Chenbro RM42300-F2 4U server. For the front enclosure area, where there is possibility to add 3U of extra interfaces (ie CD/DVD drive). Fits a 120mm PC fan. For mounting, you need: 4x M3 square nuts (fits inside plate…
Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu
My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
Wydruk około 1,03 €–1,26 € nettoWstępna wycena jednego wariantu
Why I made this as a gift for a professor after completing advanced control systems. Notice: Not affiliated with Quanser.
Wydruk około 5,50 €–6,73 € nettoWstępna wycena jednego wariantu
Edit: update April 2026 to support version 2, and the ESP33-P4-ETH (with or without the POE Hat) but files also include support for the Olimex ESP32-PoE-ISO Rev. B used in version 1. full project on:…
Wydruk około 1,09 €–1,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
PETG 25% inf perimeter 3 layer 0,25
Wydruk około 5,77 €–7,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I made a version of this using the orignal mounting plate and sheet metal years ago. I've since converted the Burns to electric and after seeing the 3s battery holder I made, someone was interested in the servo mount, so here it is!…
Wydruk około 1,95 €–2,38 € nettoWstępna wycena jednego wariantu
Connect reservoir with the toilet. PETG or ASA may be better, but in white I have PLA now. Print straight pipe as many times as needed. Supports needed only for Elbow90.stl. All parts printed with brim. Update 20240201: added Elbow90_V2…
Wydruk około 16,63 €–20,32 € nettoWstępna wycena jednego wariantu
Beschriftungsmöglichkeit für Server
Wydruk około 0,25 €–0,30 € nettoWstępna wycena jednego wariantu
100x160mm sign, reading “Dialogue doesn't deserve Death” with art of a street sign showing the intersection of MLK Blvd and Kirtk St. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena jednego wariantu
Felaqua Connect Spanner What is a Felaqua Connect? Felaqua Connect is a smart (IOT) water bowl for cats made by SurePetCare. More information about it can be read here: https://www.surepetcare.com/en-us/felaqua-connect What is the point…
Wydruk około 3,81 €–4,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET
3d model of a Kraft brand Macaroni microwave dinner bowl, and a 3d printable lid that snap fits to the bowl. Intended to support waste reuse.
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
This is a replacement bean reservoir for the Macap M2 coffee grinder. The original lid still fits on this one. It should be printed in vase mode. I printed it in vase mode with a 0.6mm nozzle. It turned out flexible but sturdy.
Wydruk około 1,41 €–1,73 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use r0tring isograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,76 €–0,93 € nettoWstępna wycena jednego wariantu
Yeti Jr Servo mount and electronics, will fit stock servo and others that are 23mm wide holes are for m3 screws, servo screws should be 5mm max and bottom mount screws 12mm max i used a red translucent PETG filament , and tested on PLA…
Wydruk około 0,90 €–1,10 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I use Koh-i-Noor rapidograph technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
I use Staedtler Mars Matic technical pens, and while I love the pen, refilling the ink is almost always the harrowing experience of trying not to spill the ink when refilling the reservoir. So I designed and printed a funnel that friction…
Wydruk około 0,57 €–0,70 € nettoWstępna wycena jednego wariantu
100x160mm sign to remind us of the ceaseless, vigilant love Big Brother has for us all. Best with color switch above 1mm, as with included gcode file. Also see the Shadowbox Frame , into which this and the rest of my sign collection fit.
Wydruk około 1,30 €–1,59 € nettoWstępna wycena jednego wariantu
[English] (Translate with Google) I have been using this service vehicle for my work for a good six months now. The advantage is that it can be completely disassembled and assembled without tools. But once it's disassembled, it's…
Wydruk około 6,16 €–7,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Power panel with C13 Plug, a toggle switch and 4 illuminated buttons Toggle switch: https://de.aliexpress.com/item/4000262590867.html?spm=a2g0o.order_list.order_list_main.301.76db5c5fKgg51I&gatewayAdapt=glo2deu Buttons:…
Wydruk około 1,39 €–1,69 € nettoWstępna wycena dla PETGMateriał u źródła: PET
100x160mm sign, bearing a relevant reminder from The Mgt. Mesh and Solid (may print easier) models provided. Best with color switch above 1mm, as with included gcode. Pictured in Shadowbox Frames , which fit all of my signs . You may wish…
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
This TSlot adapter allows you to build server racks with 20x20 Aluminum extrusions. Print the Adapter, add three M3 D4/H5 Heated inserts, slide into the existing rails on the extrusion. The Adapter complies with a 1U server rack spacing.…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Description These clips can easily be fitted over the latches on Raaco "Service Case" and "Assorter" cases to prevent them from opening when your suitcase is being thrown around by airport luggage handlers. They simply clip on, so they…
Wydruk około 0,61 €–0,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
crochet pour sèche serviette à barres horizontal. Employer du PETG ou autre matériaux qui résiste à un minimum de chaleur pour éviter une déformation quand le sèche serviette chauffe. 2 périmètres, 15% de remplissage.
Wydruk około 0,70 €–0,85 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Documentation & Assembly Guide - Please Read! I've moved much of the documentation here. Many of your questions are answered here (or will be answered) as I fill it out. READ DOCUMENTATION HERE Status updates April 22, 2025 Rendered STL's…
This is printed 10 inch server rack designed for printer with plate 250 mm x 200 mm (Prusa MK3), but some parts (rails) need the bigger one (Prusa XL). Rack has standard sizes, see https://en.wikipedia.org/wiki/19-inch_rack Rails can be…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…
3D Model made for CAD. STEP/STP and STL provided. Model completely designed by me.
Print with 50% infill - ensuring better durability. A replacement horn for the MG995 standard servo
Bean reservoir extension Philips 2200-5500 (Latte Go) series. Will increase capacity to approx. 500g (1/2 kg) or 1KG beans. Pre 2023 models: BEAN 1-4 : split version of the 500gr version BEAN_1_PIECE 1 : 500gr version in 1 piece…
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
Update April 10th, 2026: FreeCAD 1.1.0 broke the model in several places. I believe I have fixed everything and have reuploaded as "generic__mount_v110.fcstd". Let me know if the model doesn't work for you! Update Sept 6th, 2025: I have…
Update 3/10/25: Added 2 new components, the side rail with integrated handle, and the side rail stacking connector. These allow for more customization as well the ability to add more rail sections. See details below. Update 3/8/25:…
I saw a bunch of 10in server racks when looking to get started with a HomeLab to tinker. Everything was built on an ender 3v2 so some parts have to print solo at an angle to accommodate the bed size. I used overture PLA The Lenovo…
1 to 1 scale of a MG90S servo. Could be convenient for projects to build in your servo!
The design was inspired by a picture I once saw on the internet but I could not find it again. So I recreated it from scratch. When doing so, I had my CNC in mind and wanted to create it from wood (see last picture). But after some minor…
Komori Planter | with reservoir A quiet evolution of the Kumiko planter. This is the new version of the Kumiko planter design, I wanted to explore a more understated form. With Komori Planter, I’ve moved away from the traditional footed…
This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions
This is a round servo horn for a 55G Servo with 4 M3 holes.
Version 2 is here! Meet the Microlab —a super compact, fully 3D-printable homelab that’s perfect for self-hosted tinkerers who love big ideas but small footprints. At just 5 inches wide and a tiny 160x160mm base, it’s even smaller than a…
I couldn't find a vertical clamshell stand that meets my requirements, so I made my own. Fits the 14-inch and 16-inch M1 Pro/M1 Max MacBook Pro (2021 model), and is designed to be used with adhesive non-slip rubber feet. Beta version…
Here it is for all 1:400 model airport builders and fans alike printable, detailed, accurate 1:400 Ground Service Equipment! With some help from ConnerWS (not directly I remixed his stuff), I have scaled down and edited his series of…
I finished the project and will upload all the files and code as is. Servo Test (with end stop current detection) : Finished Project : https://www.youtube.com/watch?v=DbXVjOoNJw4 Materials needed : - 5 m3 x 5mm - Servo FT90R (continuous…
See https://www.amazon.com/MMOBIEL-Airplane-Helicopter-Compatible-Raspberry/dp/B09BZTRSDP/ref=sr_1_2_sspa
Jiji & Lily (Kiki's delivery service)
Robot servo motor gripper
Currently refining a small obstacle avoiding mecanum robot for an introductory robotics club and needed a simple mount for a servo driven ultrasonic sensor. This design is a single piece print with no supports that printed quickly in PLA+…
This is a 3D model of the MG996R servo. It's purpose is to help you design servo brackets and other parts that require a standard sized servo. * Just import this model into your 3D design software and now you have an accurate…
If you are like me buying cheap servo connectors without additional housing this might add feel of extra foolproof safety. Printing 0,15mm layer height, 32 pcs will take approx 3h
To replace a broken washer fluid reservoir cap for a OPEL Astra J OPC and some other OPEL models ;-) Original Part No. 13227300 Just printed in PETG orange / black. To hold the cap down i insert two magnets (4,5mm x 1,5mm x 9,5mm). MMU…
Just added the smile like on the original design https://www.thingiverse.com/thing:1364024 :-) Fits perfectly Ultrasonic HC-SR04 sensor and standard servo mount Print Settings Printer: Anet A8 Rafts: No Supports: No Resolution: 0.2…
Printed with Prusament PETG White 0.2mm support is required.
10" Server rack 1U panel - Tray Designed 2022.09 thing:6196392 printables:569024 TOC 10" Server rack 1U panel - Tray TOC Summary Description Buy me a coffee? Summary 10" Server rack 1U panel generic trays Description Trays for 10" server…
