1954 modeli
Simple child lock for the seat belt buckle in the car, so that children do not unbuckle themselves! The fuse is slid over the lock before the belt is engaged. This blocks the unbuckling mechanism and can only be pushed through the small…
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
There's 2 STL versions attached with different sizes, also a Blend file in case you whant to make an edit. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 5% Filament material: PLA Notes: Blend file is configured in…
Wydruk około 1,64 €–2,01 € nettoWstępna wycena jednego wariantu
No fighting over the Turkey's wishbone during this long-standing tradition. Also vegan Thanksgivings could 3D print this model to keep up with the tradition of breaking the wishbone. This anatomically-correct model 3D scanned by the…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
This rackmount adapter is designed to mount the TP-Link TL-SG1008P switch in a 10-inch network cabinet. The frame takes up 1 unit of rack space (1U) and is optimized for ventilation to ensure efficient heat dissipation. The adapter can be…
Wydruk około 2,73 €–3,34 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Wer kennt es nicht, da wird ein Loch mit einer Lochsäge vorbereitet und die Hohlwanddose hält, weil das Loch etwas größer ist. Dafür gibt es Ausgleichsringe wie diesen. Einfach darüber stülpen und schon wäre ein Problem gelöst.…
Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu
Introduction This is a good mechanical mount for the SG90 180 degree plastic micro servo. It is simple to assemble and print!! It can be useful for building your own robot or for some Arduino project!! I offer two model variants, one with…
Wydruk około 0,15 €–0,18 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is free. If you appreciate this model, please leave a download and a like! A simple ring for pan tilt sets from China. The ring supports the servo. This enables stacking multiple sets into a robot arm or lifting bigger sensors.…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
Turkey keychain to celebrate the Thanksgiving You can print in both colors just by stopping printing halfway through Check also my model of this Turkey but bookmark version Hope you like it
Wydruk około 0,23 €–0,28 € nettoWstępna wycena jednego wariantu
Nozzle: 0.4mm Layer: 0.16-0.24 (Recommended) Scale it as you like :)
Wydruk około 6,34 €–7,75 € nettoWstępna wycena jednego wariantu
This is a small bowl to mount on top of a jar (79mm mount) which fits as lid on the German "Glück" jam jars and has a opening for the shells (going to the jar). Ideal for pistachios, but can also be used for peanuts, olives (with stone),…
Wydruk około 6,37 €–7,79 € nettoWstępna wycena jednego wariantu
English: I thought it would be useful to have a key that doesn't scratch the chrome on the USM Haller products and that allows the simple "lock" to be locked. This is useful so that small children cannot open the furniture or curious…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena jednego wariantu
When storing your button cells in these containers you can treat them as if they were a C, AA or AAA battery. This means you don't need battery storage solutions which contain a separate section for storing button cells nor the need for…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
This is probably the simplest turkey you will find out there to 3d print. Make sure you print with supports. But once you print it, you'll see why i made it. You might laugh a little too! Please enjoy!
Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu
Thanksgiving Gear Turkey.
Wydruk około 24,71 €–30,20 € nettoWstępna wycena jednego wariantu
A replacement part for the rear feet of the Sharkoon Skiller Mech SGK3 keyboard. The original feet start to crumble after a few years. This replacement was designed as close to the original dimensions as possible. They nicely snap into…
Wydruk około 0,20 €–0,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Gibson made the SG Pro for 2 years, and the pickup and rings are a different size than a traditional P90, so they are literally unobtianium at this point. I acquired my 72 SG Pro and the brittle bakelite pickup rings were cracked (at…
Wydruk około 0,58 €–0,71 € nettoWstępna wycena jednego wariantu
PYC3D.ES SOCIAL MEDIA MEMBERSHIPS PYC3D SHOP DONATE HAPPY THANKSGIVING CAKETOPPER Add a unique touch to your special occasion with our custom cake topper. Our high-quality, personalized cake toppers are perfect for weddings, birthdays,…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
I used Tinkercad to add three magnet wells on the bottom of the puddle jumper and add extra support for the front magnet. Now as a fridge magnet, notes can be affixed to your fridge or message board.
Wydruk około 3,55 €–4,34 € nettoWstępna wycena jednego wariantu
100x160mm signs, with art of a turkey and varied thanksgiving texts Best with color switch above 1mm, as with included gcode files. Also see the Shadowbox Frames , into which this and the rest of my sign collection fit. Also see my other…
Wydruk około 1,39 €–1,70 € nettoWstępna wycena jednego wariantu
Easy to print, no support or MMU needed.
Wydruk około 0,21 €–0,25 € nettoWstępna wycena jednego wariantu
A bookmark with a turkey, espero que gostem You can print in both colors just by stopping printing halfway through Check also my model of this Turkey but keychain version Hope you like it
Wydruk około 0,14 €–0,18 € nettoWstępna wycena jednego wariantu
As far as I know is this model compatible with the SG2210XMP-M2 and ER7212PC.
Wydruk około 1,38 €–1,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Part of my wider “Pndlsm's MiniRack” series, here is a mini rack adapter (10 inch width) for tp-link 8 port switches. Design uses Hex grating of 8mm edge to edge and 2mm thickness throughout Should give a satisfying and loud click when…
Wydruk około 4,87 €–5,95 € nettoWstępna wycena jednego wariantu
Sie können diesen Anhänger Mehrfarbig mit nur einem Extruder Drucken, wenn sie nicht wissen, wie das geht, lesen sie das PDF Die Anleitung ist Verfügbar in: Tschechisch, Englisch, Deutsch, Italienisch, Spanisch und Schwedisch You can…
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
🍂 Thanksgiving / Harvest Napkin Holder – Bring Cozy Autumn Vibes to Your Table! 🦃✨ This charming napkin holder adds a touch of fall magic to any table setting. Designed with care, it consists of two pieces that easily slot together ,…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Pourer easy to print on frontside down. Only automatic painting and organic support I have printed in Prusament PETG Jungle Green with 0.4 nozzle and 0.32 layerhigh ********************************************** Der Ausgießer lässt sich…
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Its a sticker from videogame CS:GO Easy peasy
Wydruk około 10,00 €–12,22 € nettoWstępna wycena jednego wariantu
Modell wurde für eine Kühlbox bei einem VW T2 Bus entworfen
Wydruk około 7,57 €–9,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Badge de la base Icarus, dans la série Stargate Universe. Je n'ai pas mis d'emplacement pour un aiment, mais si besoin n'hésitez pas à demander. Pour un meilleur rendu faire un changement de couleur au niveau des écritures, option facile…
Wydruk około 3,48 €–4,26 € nettoWstępna wycena jednego wariantu
© Timo Schulz - [Timos Bilder](https://www.timos.pics) **Echte deutsche Möbel von Hand vermessen und digitalisiert** Dieser große Eckschreibtisch bietet viel Platz für Büroutensilien. Selbst und ein Computer mit ein klobigen Röhrenmonitor…
Wydruk około 17,57 €–21,48 € nettoWstępna wycena jednego wariantu
1st Layer: 0,15 other Layers: 0,16 Perimeters: 2 Infill: 25% Grid Scaled down to 80% (in pictures) printing speed slowed down about 30%
Wydruk około 0,85 €–1,03 € nettoWstępna wycena jednego wariantu
I needed some drink coasters so I figured why not make some. I went through 4 iteration of the base coaster design so that They can snap together like LEGOs when not in use. I printed these with a overall size of 100 mm diameter and they…
Wydruk około 1,46 €–1,78 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts. Internal diameter is 11mm, when printed in PLA I had a perfect fit right away, however PLA will conform to the…
Wydruk około 2,13 €–2,61 € nettoWstępna wycena jednego wariantu
This is a replacement part for the Meross MSG100 Garage Door Opener. The MSG100 is an odd shape and does not provide any options for mounting, despite being a wired in device, other than double sided tape which might not be ideal. This…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Achtung : Hier geht um arbeiten am 230 V Netz. Diese Anleitung ist nur für Personen gedacht, die ihre Handlungen selbst beurteilen und verantworten können. Arbeiten an elektrischen Geräten und Installationen können gefährlich sein und…
Wydruk około 0,58 €–0,70 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Ein kleiner Kürbis zur Dekoration oder als kleines Geschenk, mit einem kleinen Loch im Stiel zum Aufhängen. Für den Druck benötigen Sie keinen Multi-Extruder, da Kürbis und Stiel separat gedruckt werden. Um den Stiel am Kürbis zu…
Źródło oznaczyło ten model jako treść 18+.
BOR SG Rifle from Borderlands 4 AVAILABLE NOW! Get your copy of Borderlands 4 here.
This design is made for you to use in your projects in Fusion 360. You have .STEP and .f3d files for both the SG90 and the arm, or both in .STEP and everything in .f3d. You have the real measurements of one so you can use it perfectly for…
*** UPDATE *** My new DHD model is now available to go with your Stargate model- On Printables !! Download it FREE. *** UPDATE *** Crafted specifically for 3D printing, my fan-designed Stargate SG-1 model brings the iconic sci-fi portal…
Designed to need only the things that came with your SG90s(and maybe your 28BYJ-48 stepper too...), tried to make it easy to print, minimize number of pieces(though there are still a few), difficulty of scaffolding removal, etc. All…
I really liked Johnny_Lawrence's design for a PSA stand, its minimal, quick printing, and looks nice but CGC slabs are a bit wider and I wanted a matching stand. I modeled this in Fusion 360 using Johnny_Lawrence's PSA stand as a…
This is replacement horn for the *SG90* servo The inner teeth should fit, there is also looser and tighter versions
A small robot arm using SG90 hobby servos designed in 2017 and revived on request. I bought the small screws and tools at : https://www.kingmicroschroeven.nl There where still some old videos online: I included the Fusion 360 file so you…
Assembly 1 glue two halves together 2 You're done
IMPORTANT, PRINT THE FIRST LAYER VERY SLOW SO THAT THE HEXAGONS SLEEVE WELL. Gafas de sol con los hexagonos tipicos del relleno “honeycomb” caracteristicos de Prusa. Estas gafas estan hechas para el concurso kit cards y las sujeciones al…
This bracket is made for 10" racks. They have the standard dimensions of 1U (44.5mm) in height and 250mm in width. With these dimensions the mount can be printed on a print bed with the dimensions of 220mm x 220mm. The mount is designed…
Fishing Hook Remover Disgorge Slamatore 3 MODELS FISHING DISCHARGER
A cool holder for guitar/bass picks NEW DESIGN
3D model of Karambit, in parts so you can print easily
I used TinkerCAD to make the knife blade a comb, as I was unsatisfied with the other butterfly knife combs on Thingiverse. I think these things are even better than fidget spinners, by a long way, in terms of fiddle-ability. It is so much…
Printed with Prusament PETG White 0.2mm support is required.
I've cleaned up the mesh for 3D printing, closed volumes, etc. Sliced into 5 pieces for ease of printing. Thanks to Eddy_1701 for providing and converting the base mesh to a workable format. Neither of us holds any rights to the mesh, I'm…
My make of the Spider robot(quad robot, quadruped)-SG90 by regishsu using an arduino nano and servo shield with 2x 18650 batteries.
A 10-inch rack mount for the TP-Link TL-SG108 | TL-SG108PE | TL-SF1006P | TL-SG608E switches. This mount has been tested on both V3 and V5 hardware revision of those switches, but it should be compatible with other revisions as well. I've…
A bracket to mount a SG90 or MG90 servo to a plate. Normally printed in PLA with 0.15 mm layer height.
--Updated V2 Available Now!-- Features 3mm alignment pins and better clearance! Use standard nails as alignment pins for more consistent driving. This is a fork seal driving tool for use with 48mm diameter dirt bike forks. This was…
I made this mounting plate for a micro servo because my 9G servos didn't have the disc mount which was used in this robot arm model ( http://www.thingiverse.com/thing:1684471 ) It fits my "Tower Pro" SG90 micro servos, which have 20 tiny…
This model is compatible with the lego system.
This is my model of the Stargate in the SGC pedestal. The model is printable without any support material and could be assembled as a lego - no need for a glue. The inner ring of the gate could rotate and it has teeths while the pedestal…
An extension arm to get a longer reach for the SG90 servo. Usually printed with PLA at 0.15 mm layer thickness. This does not fit on the MG90 servo's
Changelog/News: 2021-02-03: Added new variant "08 Gear rack drive (main body) v5_strongerprint" for easier removal of support structures 2019-02-24: Updated "11 Gripper arm" to v5, implementing these suggestions 2019-02-10: Peter (…
This is a scale model of a sggmrss container car. Included are fitting Y25 bogies. The bogies and waggon parts connect together via clips. The frame has holes for either piko containers or pins can be glued in for other containers. The…
UPDATE: A maker asked if there were mounting brackets. I was just in the process of finishing up. So, here they are. A wall mounting bracket system and table display system - uploaded to the thing files. Your feedback really helps. Thank…
I used PLA filament for the model! Print: Nozzle 0.40 mm Layer height 0.2 mm Set the maximum print speed to 60 mm/s in the Prusa Slicer. Ich habe für das Modell PLA Filament verwendet! Druck: Düse 0,40 mm Schichthöhe 0,2 mm Im Prusa…
Here is the file for my Vault of Asgard Its a Zero Support Model that makes a Beautiful form that can be used for storage or even a lamp, I have included an Inverted version if you would like the Pattern the other way up . I hope you…
This is a simple coaster based on the Milky Way Stargate of the TV series Stargate SG-1. I just added the iris to a design made by Tooner.it
This is a 10-inch rack mount made for the TP-Link SG108/SG608E switch. I didn't like that other mounts mostly rely on a friction fit to keep the switch in place, so I've added locking tabs that slot into the mounting holes, which prevents…
A sturdy 10-inch rack mount adapter for one or two TP-Link SG1005P. Also works with the SG105. To install the switch, simply slide it in. However, if you already added the rubber feet, remove them before installing the switch in this…
Puffy and simple in appearance models of a turkey, chicken, and duck. All tasty birds for a thanksgiving day feast. Printing tips: Some supports are needed especially for the underbellies and beaks. I recommend tree supports. They can be…
Nicht AMS-Version: Das Filament muss für schwarze Schrift auf 1.5mm und für das rote Herz auf 1.9mm höhe gewechselt werden.
Threaded oil funnel to fit most 250, 350 & 450 KTM / Husky / Gasgas motocross bikes. The funnel threads directly into your existing oil reservoir for easier oil refills. Air vent integrated into funnel to allow for fast pours with no…
Thor-approved variants of soozafone's Pencil Polearms: print as-is, without supports. Uses the same topper piece as the original (included). The socket and layer orientation might cause the fit to be a little tighter than the “open”…
A simple micro servo dummy for help on your creation needs. One thing i had no idea about this servo (particularly the Tower Pro, not sure about others) is that its body is not perfectly square but is slightly tapered towards the top.…
This is my model of the Stargate from the Stargate Universe series. This s the Offworld gate in pedestal. It has a feature that the the entire gate spins in the pedestal with the help of 2 gears, An assembly video is here:…
Update: Added .step and fusion360 source files I plan to use this automated iris remix for my prusa enclosure and later to control my air exhaust system from the printers and laser cutter. Using a 24 teeth spur gear instead of th 12…
Ein Satz von Putzausgleichsringen mit 60 mm Durchmesser von 6 mm bis 25 mm in 1mm Schritten. Als Schrauben die originalen Kaiserschrauben verwenden Man kann die im Internet bestellen, wenn nötig. Die Putzausgleichsringe können auch als…
Decorate the frames of your doors
Remix of this mesh on thingiverse, which starts out with the basic shape, which I've smoothed out to a high poly mesh, then added approximate cut-out details from reference photos. It's symmetrical, so one can print half of it twice and…
See https://www.amazon.com/Smraza-Helicopter-Airplane-Control-Arduino/dp/B07L2SF3R4/ref=sr_1_1_sspa
it is a fun knife to just play around
Hi, thanks for downloading my file! I made this suppressor/silencer for my Novritsch SSG24, because the one Novritsch sold on his website was a bit too expensive for my taste. How it's made This silencer is made up of three easy-to-print…
Small bracket for mounting a SG90 9grams Servo flat against a surface with standaard screws. Recomended to print in PETG or ABS.
Fully printable SG90 Stepper rotors. Might also work with other servos if you scale it appropriately. Category: Robotics
------------------------------------------------------------------------------------------------- UPGRADED PARTS AVAILABLE! ------------------------------------------------------------------------------------------------- This sturdy 1U…
... this is the perfect digital to analog interface for mechanical engineers! Consists of a "button pusher arm" and a bracket to hold down the servo. I used two of these to automate my coffee maker: first servo pushes power button, a…
Very simple to print. Use 2 M2 screws for servo mounting and 2 M3x10 screws for the rack
Weihnachtsgnom mit Laterne zum stellen und hängen! Ich habe die standard PrusaSlicer Parameter für PETG verwendet. Langsam drucken verbessert die Druckqualität! Druck: Düse: 0,4mm Schichthöhe: 0,2 Infill: 100% Ich habe PETG für den Druck…
The Pirates CSG was produced by Wizards of the Coast from 2004-2008. It was heralded as the best, historically accurate naval warfare game that eventually added a hefty serving of fantasy to diversify gameplay. The ships came in blind…
This is a 10 inch rack mount for a TP-Link SG105. I have printed it whit ABS. No support needed, I have added a custom support in the model. If you need a 10 inch rack mount for a different brand or you just need a cover plate I will…
🔎 Impression multicolore à couches variables (sans MMU) 🎨 4 couleurs, 3 changements Bleu Blanc Rouge Or 📏 180 mm
easy to print sign, ideal for your thanksgiving dinner decoration. as usual, it is designed to fit any mid size printer, each color is separated file so you can print it with a single nozzle printer or separated plates for minimize…
CSGO case that can store the 3d glock popular prop!!! I suggest printing it in 0.30mm . 10% infill to save filament. Can store other things! Its a great storage for all Counter-Strike players and gamblers ;) Can be used as a gift box for…
Printable CS:GO Bayonett from the Videogame Counter-Strike Global Offensive TOTAL LENGTH: 270mm Blade+Handle Simply Scale up if you want a bigger Knife. -NO Supports Needed -Material and Color doesn't matter -Recommented Layerheight:…
