Liczymy pasujące modele…
***NO SUPPORTS REQUIRED FOR ANY OF THE PARTS.*** To assemble, place the flip tabs upright in the game base and feed a piece of filament through the game base mounts and the flip tabs. Try to straighten out the filament somewhat before…
Wydruk około 0,37 €–0,45 € nettoWstępna wycena jednego wariantu
This is a model for Shutter Shades. I like to print these and give them out at events. Note there is only one model for the arm. You will need to duplicate it and mirror it in the slicer for the second arm. The Arms can be printed on the…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Needles: 10cm, 15cm & 20cm Shuttles: 10cm, 15cm & 20cm
Wydruk około 5,62 €–6,87 € nettoWstępna wycena jednego wariantu
This is a simple, triangular tag with text “MAIN WATER SHUTOFF” or “EXT. WATER SHUTOFF”. This tag is intended to hang on the pipe or valve near the main shutoff valve for your incoming water line in your house/apartment or to any external…
Wydruk około 0,41 €–0,50 € nettoWstępna wycena jednego wariantu
[Fr] Il s'agit d'un bloqueur de manivelle de volet roulant, de section cylindrique ou polygonale de diamètre 16 mm, à coller avec du scotch double face sur la paroi. Je l'ai conçu pour remplacer mes bloqueurs cassés. [En] It is a roller…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena jednego wariantu
Inspired by the Atlantis display at Kennedy Space Center, Florida, here is an add-on for the 3D Shuttle Stand. Attached is the gcode to pause the print at layer 20 in order to change filament color. Also attached, is the NASA logo to be…
Wydruk około 2,20 €–2,69 € nettoWstępna wycena jednego wariantu
A Space Shuttle Line Art display plate
Wydruk około 1,91 €–2,34 € nettoWstępna wycena jednego wariantu
240x30x3mm 240x20x3mm 200x30x3mm 200x20x3mm
Wydruk około 1,41 €–1,73 € nettoWstępna wycena jednego wariantu
simple privacy shutter for target virt camara
Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu
Eve Shutter Switch External Housing for Wallmount We had a very old electric control for our window shutters, which was not mounted inside the wall but had a small housing. I wanted to integrate the shutters to our smarthome (we use the…
Wydruk około 2,27 €–2,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
sliding shutter
Wydruk około 0,51 €–0,63 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Support Me Support my work by subscribing to my Printable club to have access to my new model, my first lander, the Starship V2 . You can also have access to the multi-material version of the Space Shuttle. Updates 22/11/2023 Added a…
This is my model of the Space shuttle Endeavour OV-105. The model is a kit and does not require any glue. It is roughly 50cm long and has several features. The cargo bay doors can be open. It has posable arm and the satellite could have…
Quick print glasses for New Year's 2024! Remix Info Primary new thing here is the filament hinge inspired by a different shutter shade remix. The original openscad design was really good but the snap-fit arms were very fragile. I used…
More of my Star Wars kit cards are available at: Millennium Falcon Kit Card Tie Interceptor Kit Card Landspeeder Kit Card Also check out the awesome Star Wars Kit Cards by benzz88 Edabot Nakozen and delman83 This was made to fit when…
https://youtu.be/6Nzt53SJRzs Printing All parts can be printed without supports 2 perimeters and 10% gyroid infill is sufficient. Most of the design is perimeter walls. Shutter can be printed in PLA, but avoid silk or matte PLAs. These…
If you download the model, please don't forget to leave a like. Thank you! <3 This 3D print file captures the awe-inspiring moment of a space shuttle breaking through billowing clouds, ascending into the boundless expanse of space. This…
This is a booster pack for the Space Shuttle Edeavour . It consists of the Orange external tank and two Solid Rocket Boosters. The pack is attached to the Orbiter using the holes for a stand. In the suffix of the files, there are color…
Quick print glasses for New Year's 2025! Remix Info Primary new thing here is the filament hinge inspired by a different shutter shade remix. The original openscad design was really good but the snap-fit arms were very fragile. I used…
A pencil case with a sliding shutter door! https://www.youtube.com/watch?v=3nYm0oPaSr4 Options Default - Uses glue. Has thin 1mm walls and slightly more storage space. Thick - Uses glue. Has thicker 3mm walls for adding embossed text.…
I made an improved version with more details: A model of an imperial Lambda-class Shuttle from Star Wars with foldable print-in-place wings. It comes at 1:270 scale. The cannon barrels are fused together to make them less brittle. The…
This shutter box contains a super cool mechanism that allows the blind to fold up inside the body of the box. Assembly: First print the Shutter blind flat on the build plate Next print the box itself and at this point pause the print You…
1/200 Space Shuttle FSS Tower for Kmobrain Space Shuttle models Print all parts in Grey except “white….” named parts Ajust arm height to stick them on the tower at the right height for the Shuttle Use 1mm axis for arm and Beanie cap or…
This is 3D printable model of the Space Shuttle OV-101 Enterprise from the Star Trek and the real life. It is a kit. The different colored parts are separated for easier printing. In the suffix of the files, there are color codes: w-white…
A mini quiet fidget with a lot of tactile feedback in its small frame. https://youtu.be/M5QoJNZkU1U https://youtu.be/W6o0j-xrIEU Printing All parts can be printed without supports. Add a brim if your printer has any difficulty with…
can be printed together or separately in other colours can be printed without support the Shuttle is very realistic Print in place kit card , Assembly required
The print consists in two parts to be glued together, but the whole model is also available. The original 3D files used for this model are available here .
NOTE: check out the original version for more information: Spaceshuttle - Kit Card by Crea_Hicks - MakerWorld An easy to print and fast to assemble Spaceshuttle Kit Card. Recommended to print with a low layer height (0.08mm) or supports…
A small circular container with a sliding shutter door! https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts can be printed without supports Shutter can be printed flat or vertical, but flat is…
Remove the wheels as in the pictures (see picture 4 & 5) Space shuttle : Fixed with wall plug (see picture 8) and Double-Sided Tape for nose gear (see picture 6) Slide the front part (red axle) into the “shuttle hook nose gear” (see…
A iris shutter for a beamer, to show/hide the projection instant. Operated by servo motor. alternative spur gears for different servos.
Don't let the number of files intimidate you, you'll only needs a fraction of them - continue reading and you'll see why there's that many ;) A riser with rolling shutters. It'll provide the best possible airflow while remaining as…
assembly animation: https://www.instagram.com/p/ChpIqSooebQ/?igshid=YmMyMTA2M2Y= 1x “ shutter mechanism p11.3mf ” 4x “blade p1-4.3mf” 4x “blade p5-8.3mf” 1x “shutter mechanism p12.3mf” 1x “shutter mechanism p9.3mf” 1x "shutter mechanism…
Pas de tir de la navette spatiale à l'échelle du magnifique modèle de Kmobrain https://www.printables.com/fr/model/2139
This is a model of the Valkyrie Shuttle from the Avatar series. It is made as a kit and does not require any glue. The model has several features: Openable roof door Movebale engine parts VTOL engines can rotate Openable back door…
Somewhat faithful replica of the RS-25 main combustion chamber (Space Shuttle's engine). It was designed for conventional machining, but should print ok too especially if done in resin. The threads are #0-80 so likely won't print well on…
Hey everyone, first of all, it would mean a lot to me if you could download my model. It truly inspires me to create more. I make these models because I find it enjoyable, and I want to give back to all of you. All my models are…
I designed a few shelves for below my monitor with roller shutters and I integrated two USB-hubs. As mentioned in some comments, the whole thing is a little bit challenging to print and to be honest the roller shutters open and close just…
This is a simple net needle/shuttle which can be scaled down in your slicer to suit whatever job you have at hand. The STL attached will print a 280mm long shuttle if printed diagonally on a 250 x 200 mm nominal print bed. If you require…
Adhere a neodymium magnet of 2.5 mm or less in thickness. I recommend 13mm diameter, 2.5mm thick magnets from Daiso. 厚み2.5mm以下のネオジムを接着してください。 おすすめはダイソーの直径13mm 厚み2.5mmの物です。 The model is modeled for V3 Plus from 0 based on the model in the…
Edit 26-01-2026 I have recently developed a new and in many ways better shutter design which I recommend over this version. It does require a few more non-printable components but it may be worth it to many users. It can be found over…
The Delta Flyer Commissioned in 2375 & built by the stranded crew of the Starship Voyager. Able to accommodate 3 crew onboard, with several formidable armaments. Model is not my own however I could not find any Delta Flyer models here so…
Original model This support is to be used with my Space Shuttle . Dimensions et Informations Il fait environ 8 cm de haut pour 16 cm de large. Il y a 15 pièces à imprimer. Je l'ai imprimé en environ 4 heures. Conseils de Réglages Infill :…
This is an accurate recreation of a toggle switch guard used on the many control panels in the space shuttle. Included is a PDF are the part dimensions in case the standard thread dimensions of the switch are different from what you…
My Educational Mechanical Examples Series This model is one of my educational mechanical mechanism examples on 80mm x 80mm base plates. You can find all models of the series in this collection => [Mechanical Mechanism Examples] This model…
Sizes This box has two sizes, small and medium. Assembly list of non-printed parts 12 pcs - metal axis 36( 35 )mm x (2.8 - 3)mm or M3 screw with internal hex head 4 pcs - 20mm M3 screw with internal hex head 4 pcs - 20x6x2mm neodimium…
This is a model that we made to lift up the reality lid does two things we're able to get air flow with the door closed so it keeps the chamber cooler with PLA and pet G as we've noticed that it's been rising up quite a bit even with the…
A small circular container with a sliding shutter door and a carabiner loop! https://youtu.be/6Nzt53SJRzs https://youtu.be/sBsHtqxGVIw https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts can be printed without supports Shutter…
This is a revision of ModelStation's Space Shuttle model, with most of the major components fixed to be properly manifold and normals corrected (according to both Blender and Slic3r) where needed. I also took the time to un-triangulate…
A heart-shaped box with two sliding shutter doors! https://www.youtube.com/watch?v=3nYm0oPaSr4 Printing All parts can be printed without supports Shutter can be printed flat or vertical, but flat is recommended Options Plain heart Heart…
Quick print glasses for New Year's 2023! Remix Info Primary new thing here is the filament hinge inspired by a different shutter shade remix. The original openscad design was really good but the snap-fit arms were very fragile. I used…
Il s'agit d'une pièce qui semble casser régulièrement sur les C4 Picasso. Il s'agit de l'engrenage partie haute de la pièce qui ouvre et ferme les volets pour la circulation de l'air chaud ou froid. Il existe une version sur Thingiverse,…
This is a simple print of a toy space shuttle. Despite slicer warning, supports were not required on my Pruse MK3. A simple print, toy airplane can be found here .
This is a hinged privacy shutter for a Logitech C615 webcam. The shutter can be raised when the camera is in use and lowered to ensure (visual) privacy when it is not. The mount features cutouts for the 'in use' LED and microphone, and…
This is a container for pens, whose design is based on a shut-off-valve which gets used by the German fire brigade. It can hold up to 10 pens. For assembling the parts you need some glue. I used strong 2K glue, but every other glue should…
The model that Mikyleee used was nice. I liked it, however, I wanted something that may stay in place as I did a print today and man can the X1 move. Figured I would try mounting some small magnets and see how it holds. I will be printing…
Intro: my kid is a lot into space shuttles and have an original Duplo space shuttle ( https://www.lego.com/en-gb/product/space-shuttle-mission-10944 ) so I created for him attacheable orange external tank with booster rockets (real…
use the .3mf file with color change
This 3D printed game is a family mathematic game, a tool for children to learn basic mathematic functions through play. It also encourages children's interest in learning! It can likewise improve memory of the elderly. I had originally…
Experience the thrill of owning this iconic starship with this stunning 3D printable STL model that brings the galaxy to your desk. This meticulously detailed Imperial Shuttle features authentic triangular wing design, intricate hull…
Used Shapr3d to modify.
NASA's Space Transportation System (STS, AKA Space Shuttle), modeled in 3DS MAX. Modeled in one day as a demonstration for a class I taught.
Here is a modular ice shuttle that all the parts printed on an MK3S+. Its parts were designed in tinker cad. I used Petg for everything with 3-4 walls and 30% gyroid infill. Supports are only needed for the transducer holder. Just about…
Doll-House window frame with opening shutters. For the assembly, use a piece of sturdy filament of 1.75 mm or a pice of electroc copper wire. Scale to desired dimensions.
This is a refined version of the model I'm actually using - this model has the shuttle sitting bit closer to the wall than you see in the picture. For strength, I recommend that you print in PETG 20% infill and in the orientation you plan…
Introducing my very first sponsored project. When Bambu Lab released their new translucent PETG filament I've reached out to them with an idea that have been thinking about for a while now, a model that resembles a stained glass window.…
A coffin-shaped case with a sliding shutter door! Options Plain Crack Web Bat Printing All parts can be printed without supports Shutter can be printed flat or vertical, but flat is recommended Assembly If printing the bat case, glue in…
Box for 4, 6 or 8 × Drugs with a roller-top shutter - use a little grease for the shutter groove
Median wall thickness is 0.6 mm (suitable for 0.3 mm nozzle). When using other nozzles, I recommend scaling proportionally. If the walls do not adhere near the corners, you can increase the flow value and try a better linear/pressure…
Shut Up Button (modeled after an easy button) requested by a coworker. Uses three 9.5 x 19 mm springs for real button pushing action. Also uses three M3 flat head screws to secure the bottom to the body. A blank button stl file is also…
Landing gear might not print well, so don't say I didn't warn you
A grate looking space shuttle Very easy to print Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: Yes Supports: Yes Resolution: 1.5mm Infill: 20 Filament: . PLA feul tank - orenge, other - white Category: 3D Printing
A Space Shuttle Pocket Rocket Kit card, the perfect gift for anyone who loves rockets.
This is the main ADDON to the Endeavour Space shuttle. This Addon gives you possibility to print different shuttle orbiters - the whole fleet actually. It is divided to individual folders and each consists of the shuttle parts, that…
I have just quickly added screw holes. I don't trust tape.
Greetings everyone! I've been working on creating a replica of the Destiny shuttle from the Stargate universe. This one is a low poly sample file. The highly detailed model is moved here:…
Space Shuttle kit card ornament I made to give to my friends Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 25% Filament: Hatchbox PLA PLA White Category: Decor
ESP32 D1 Mini Case Click shuts nicely Easy print. Dimensions are in the pictures Check out my other stuff https://www.thingiverse.com/micahjj/designs Feedback and Makes I really like getting feedback and despite having thousands of…
Griff für Absperrventil, 100mm (Durchmesser) x 10 mm (Vierkant) DIN 390 B Handrad mit Wellenkranz Bitte ohne Support drucken. Handle for shut-off valve, 100mm (diameter) x 10 mm (square) DIN 390 B handwheel with shaft collar Print without…
I recently got a Contour ShuttlePRO V2 to help with video editing in Final Cut Pro. It came with paper labels for the upper buttons, but for my needs I was missing two labels. And the lower six buttons have no labels. I thought I'd use my…
I picked up an older model Easy Weaver loom at a second hand shop, but it was missing quite a few pieces, including a shuttle. They are generally made out of a wood species such as beech, which is hard to find around here. In addition,…
I needed something to use as the basis for electronics projects. Prints without supports, and is easily modifiable for electronics projects. (F3d file included) Both parts print without supports. Print the box the right side up, print the…
The imperial T4a Lambda-class Shuttle was a personal transport used by high ranking imperials, including even the emperor himself. It was an elegant ship that was nonetheless heavily armed. Its cockpit could be ejected as an escape craft.…
Building a Cockpit or just want some Fidget..here are 3 haptic feedback switches: Rocker Switch with two stable positions. Toggle Switch center position - always returning to center. Toggle Switch End is centered with two stable end…
A mini (and now customizable!) quiet fidget with a lot of tactile feedback in its small frame. https://youtu.be/W6o0j-xrIEU https://youtu.be/M5QoJNZkU1U Printing All parts can be printed without supports. Add a brim if your printer has…
Simple Tatting Shuttle Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: Yes Resolution: 0.2 Infill: 20% Filament: Prusament PC Grey Notes: Any material does the trick. Category: Gadgets
All manufacturing instructions are in the manual
use the .3mf file with color change
Articulating Star Wars Imperial shuttle. Remixed from original and includes colored design. Prints well but the wings are not geared to each other and move independently. Added custom stand to hold the shuttle up to display it with the…
I worked on this mounting system for 2 months struggling with fusion 360 and working around my PCs limited ram capacity. I have now had this mount on my wall for 2 months and we have no signs of issues so far. This mount uses 4 m5x16…
A simple stand to display a LEGO model Remixed from hxla s space shuttle stand, just made it smaller and slimmer. It didn't turn out perfect though, as I had trouble with editing the stl file. Maybe I'll add a new, parametric version in…
Overview: This model is a 1/60 scale model of the space shuttle and MLP. The shuttle itself is the Amphioxus model available here for a reasonable price: https://cults3d.com/fr/utilisateurs/theamphioxus/fichiers-3d NASA chose to reuse the…
A replacement for “xxx_-_sat_logo_w_b.stl” from the original model by Martin ( https://www.printables.com/model/628010-space-shuttle-endeavour ). I removed the “Prusa Research” text and replaced it with the NASA worm logo. Print using a…
Clone Wars Season 7 Episode 09 introduced a new mandalorian ship which appeared for only a single scene. It is the ship that took Asohka and Bo-Katan to their meeting with Anakin and Obi-Wan. The design is similar to a…
http://www.sp-dynamo.com/8Xseriesdynamo%20hub.html http://www.sp-dynamo.com/8-series-pic/connect-installation.pdf instructions for connector installation. I have an Exposure (rebrand of Shutter Precision) PD-8X 6V, 3W dynamo hub, for…
I recently bought and restored a Kenner Imperial Shuttle from 1984. The wing mechanism was broken, I looked online for free replacement parts, but I couldn't find any. So I made my own in Fusion 360, enjoy! Print instructions: For a full…
Quick print glasses for New Year's 2022! Remix Info Primary new thing here is the filament hinge inspired by one of the shutter shade remixes. The original openscad design was really good but the snap-fit arms were very fragile. I used…
A pencil case with a sliding shutter door! Snap - No glue needed. Requires accurate printer. Walls are 3mm thick.
Long Shutter box to elegantly store long tubes, syringes, pencils, pens, watches etc. no supports, no brims 15% infill.
Experience the thrill of the Empire with this stunning Imperial Lambda-class shuttle 3D print model that captures every intricate detail of the iconic spacecraft. This meticulously designed STL file showcases the shuttle's distinctive…
