146 modeli
🔬 Originally, I developed this tool to simplify the handling of medical samples in the clinical environment. 🧠🧬💉 The sides are curved for a better feel and the small dot helps to keep the slide optimally centered. It works for all…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena jednego wariantu
A 3d model of the yeezy slides. I scanned it with polycam and then touched up the mesh in blender. If you want the blend file, ask in the comments! Please make sure to drop a like if you download, it helps a lot to support me! Edit…
Remix based on: Yeezy Slides (Printable) By Orangemn6 Yeezy Slides separated (right and left one) and scaled. Shoe Size: 9.5 US MAN / 7.5 MX Scale it as you'd like UPDATE: 18/08/22 I printed right slice and it was a bit smaller than…
You may also be interested in my Dust Collection Port (v1.0) for DIY Router Table - designed for 2.5" hose from Vacmaster shop vac Featherboard for woodworking, no supports needed, with M5 & M6 options for knobs & track slides - plus ¼"…
I ended up slightly modifying the slots on the featherboard, as well as designing new knobs and slides, all of which fit common-to-the-US 1/4-20 UNC hardware. Use lock nuts in the knobs and standard 2-inch-long hex bolts in the slides.…
Sized to fit on my printer and with a dovetail join. To install a full set of slides in a Kallax cube, print 6x of each slide, 2x of vertical alignment guide, and 1x of front alignment guide. Requires #6-¾ screws or equivalent and use MDF…
Navigate your way through a series of 30 puzzles, from easy to nearly impossible. Can you slide and shift the blocks to successfully free the big block? The game comes with a dedicated storage compartment at the top of the board to house…
A CFS stand with a bottom slide out to access the lower CFS unit easily when needed. ( 10 Print Files Total needed for this print). You will need bolts to attache the plates to the side walls(M4), just screw bolts into the holes, nuts not…
Open Source: I have redesigned Sloffies to be fully parametric; the script is Open Source you are free to remix, adapt, and build on the existing design. Github: https://github.com/Jeandre-Groenewald/Sloffies---Parametric-slides I have…
This piece works on 2009-14 Kia Sorento, but has been reported to possibly work with 2015 and 16. May work on Hyundai Santa Fe 2014-15. I clipped off the raised center of the vane it fits on. The clips with the tab down and on the right…
I liked the original drawer but had some issues installing it. This is a very quick remix of the two slides on each side of the drawer. For details on printing and installation, please check the original model:…
Finger yeezy slides for fingerboarding and other things
Any feedback would be greatly appreciated . Nozzle 0.4 Layer Height 0.2mm (Recommended) Supports needed Scale it as you like :)
The dark slide snaps in place in the holder. Clip the holder on e.g. Shoulder straps Belts Camera bag dividers Pockets etc. ------------------------------------------------------------ Print in the default orientation without supports .…
Don't want to go on onshape and figure out what config you need, here is a pre exported version of the most popular configuration of opinsert, along with a bill of materials for everything you need.…
Give your dummy some style, with these kicks! This file should clip onto the bottom foot joints! And, For the first time, my website, 3DLAB !
This is just a simple update to the drawers so they can be taken out independently. Added New Jamb with slots for slides
EDIT: This is a simple design. Requires no supports, and slides under the desk when not in use. Has a long print time, but well worth it as it only requires mount screws beyond the print material.…
Inspired by the recent push by Prusa research to design and manufacture useful items in the fight against coronavirus, I thought I would share some items I designed and use regularly for research in my lab. This was designed so that it…
A colleague needed a box for microscope slides and found this model first: https://www.printables.com/model/810152-microscopy-slide-box . It worked sufficiently, but after some usage, the following we needed some adjustment according to…
Work in progress, not tested. This is a Remix of Voron 0.2 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (need to modify probe to…
This is a tool holder for the Anycubic Kobra 3D printer. It is designed to slide into the extrusion on the lower left side of the printer. It holds the following tools: Flush Cutter ( Amazon Link or similar) Precision pliers (Amazon Link…
In education you often had to clean a lot of microscope slides after a lesson. So its good using a dishwasher for that. A holder for 30 slides make it easier. USE PETG, because the temperature in a dishwasher is higher than 60°C!
A set of slides to get the Trofas Boxes into an Kallax shelf. It s a short and a long slide, both together are the full length of an Kallax sqare. Printing in PLA and PETG is possible. Ein Set von 2 Schienen, um die Trofas Boxen in den…
These boxes are designed to stack, but they are annoying to access if you cant get to them one at a time. I designed these slides to fit between two pieces of wood placed exactly 375mm apart. They can hold quite a bit of weight.
I'm happy with these now. Edit 4-16-2025 7:27EST - Added Outer slides with extra height to clear Frameless hinges with ¾ thick cabinet doors. Edit 4-17-2025 8:51 EST - Changed 3mf file to only have one outer slide per design. Printing 2x…
Updated: 1/26/25 - MORE DUCKS!!! Duck variations: Afro Duck (coming soon) Alien Duck (coming soon) Angel Duck (coming soon) Artsy Duck (coming soon) Beanie Duck (coming soon) Business Duck (coming soon) Cap Duck (coming soon) Cozy Duck…
I wanted to make a casual slipper-type shoe like the Yeezy slides, and was inspired by Appa from Avatar the Last Airbender. I designed this in blender and sliced it with Cura. This shoe is a size 8, so scale appropriately based on that. I…
I made this adaptors for slides and negatives for my Sigma Macro lens that has a filter thread of 55mm needs uniform light (I simply point to a white wall well illuminated and far enough to be out of focus) printed on PLA at 0.2 Created…
Printing I recommend printing from ASA material because of its ability to be post-processed to a glossy surface like a porcelain. For better results slice the part with 3 perimeters and 100% infill and layer max 0.20mm. For Bottom part is…
Hang it at the junction of the legs. 1x slot to store your smartphone 1x hole for a can or bottle 1x hole for anything It measures less than 200mm wide and will consume around 200gr. wall thickness: 2mm Top/botton: 2mm infill 10% Print…
Designed this easy and quick to print wall holder for crocs/slides/clogs/slippers, rounded corners to prevent injury, attaches to the wall using 3m command strips or similar, I used two of the 2kg ones. Included an optional easily…
I have the same slides as plbarrio ( https://es.aliexpress.com/item/A-Set-Plastic-Prepared-Microscope-Slides-Animals-Insects-Plants-Flowers-48pcs/32773548174.html ), and I'd like a storage solution, so I remix the original: close the…
Remix from Araneus0390's model which is fantastic, but a little too tight on the tolerances for some of my slides! See the original model below for the awesome features this box has. This model has increased tolerance for the slides…
This is a Remix of Voron 0.2 R1 Front Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (not enough space to use 6 x 3) You need all other…
I liked the simplicity and functionality of Jose's design. But I wanted a bit more organization. One compartment for taller tools (like nozzle plunger), one for shorter tools (like filament cutter), and one for putting screws and parts…
These are the slides that are screwed to the back of the cabinet door, modelled off ones supplied with Beko BCFD350. Printed at 0.2 with PLA+ using 20% infill.
For building this drawers, you need a router, a drill and a saw. The router bits are 12mm and 18mm, also a pocket hole jig to fasten the front panels are helpfull. There are PDFs with the technical drawings, please refer to them, to see…
A box designed to hold 10 rectangular petrographic thin sections. The slots are designed with a “V” notch allowing the sections to be held without touching the sample surface. This protects the sample and any conductive coating applied…
Required for the spool holder: 2/4mm teflon tube Required for the guide: M10 Male Straight Pneumatic PTFE Tube 15mm drill or a step drill Required for the hygrometer: Hygrometer 2x M2,5 x 5 screw 2x M2,5 nuts
These snap-together drawer slides are designed to stack Gridfinity boxes vertically (5-unit depth) for easy access without unstacking everything above. The concept allows you to pull a box out like a drawer using the front handle.…
I modeled this for fun when my socket broke. It's held up a drawer of 3 heavy cooking pans since I replaced it a few years ago. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2 Infill: 15%…
Manufacturing instructions: Material: PETG, PLA 3D Printer: FDM 3D printer, average print time 7 hours. Slicer settings: 0.3mm layer height, 3 perimeters Post processing instructions: Clean stringing, use 2pcs M4x20 bolts to attach lid to…
FTC 21196 Norwood Industries linear slides. Featuring anti-slip bearings.
These brackets allow Harbor Freight media storage cases to sit on drawer slides. The cases can be opened when slide out all the way. The cases can also be removed to take to your workspace. I believe these brackets will work with most…
This is a support to allow microscope slides to dry. Gaps are 1.5mm wide. Fits 20 slides. Simple print, no supports.
Shonk created a fantastic action tracker for Pathfinder 2. This remix updates the model to add magnets (I love magnets!) so that the sliders will magnetically snap into their up or down position. Updated all of Shonk's versions; extruded,…
Easter Bunnies to brighten your day! This fun light switch decoration can easily slip behind a light switch wall plate and stay in place securely with the built in mounting slats. The two bunnies depicted in the print are busy hiding…
Don't worry about the look of the body and the wheels, Its been to the skatepark over 30 times on 3s. One file works for both left and right. new file added! has a retainer that fits on to the outer edge to keep the paddles from sliding…
Simply print it from any material and start using glass slides on your Nikon microscope. You can also access our editable CAD model online here on onshape.
As long as I love my AirPods Pro, I've never been happy with existing protective cases. They may protect from scratches. But when the case is dropped with the AirPods still inside, the case opens as it hits the ground, and the AirPods…
Customization of http://www.thingiverse.com/thing:518915 with some extra parameters added. Supplied model is for https://aliexpress.com/item/1005005191543947.html. 🇪🇸 Personalización de http://www.thingiverse.com/thing:518915 con algunos…
Ryobi power "thief" slides on - V2 It has flex so the bolts keep a good connection --------------------------------------------------- My settings: PETG Layer height: 0.2 Perimeters: 3 Infill: 15% No supports
Hodls up to 40 pcs 76×26×1.5 mm microscopy slides and coverslips. Closes with satisfactory “snap” Print lid upside down, be careful with printing or releasing latches – place separator such as stick glue under the lid latches, remove with…
Internal magnets have been added so that the pieces are placed precisely and quickly. The magnets are neodymium. Its dimensions are 10x2 mm. I have marked the magnets so as not to lose their polarity. The gap in the game has also been…
Storage box for 80x 35mm Slides Simple storage box with hinged lid. Holds 80 35mm slides. Has space between the slides to allow for easy access. To connect the lid just feed in 1.5mm filament throught the hole and cut at each end. Lots of…
This project consists of three slides that allow multiple options when hanging and stabilizing "barn door" style doors that are 3/4" thick at the bottom. I built a custom door first and then designed this slider hardware to match it.…
Rear mounting brackets for side-mount drawer slides for a drawer in my kitchen. I am not sure of the brand, but my house was built in 1992, so if you have old drawers with this same kind of rails, then you should be able to use these.…
These swatches can help you figure out the layer height you want for flat translucent prints. The left column is the thinnest layer height, the middle column is the thickness noted, and the third column is the thickest layer height. Print…
Slideshow The lid on this box slides open and closed at an angle. This means that the pieces do not simply fit in, especially if there are already pieces in the box. The goal is to pack the four pieces and close the lid. Printing…
Simple thing to hold organization boxes. Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: Doesn't Matter Supports: No Resolution: 0.2mm Infill: 20% Category: Organization
For those that use the EBow ( https://ebow.com/ ), it's an awkward thing to put down when using it in a gig. I've seen some drill holes in theirs so it can hang from a string on the mic stand but I didn't want to do that. So I designed a…
Can be submersed in a beaker to clean glass slides. Print from e.g. PETG for better resistance to cleaning solutions.
This is a Remix of Voron 0.2 R1 Mini Bowden Cowling to use with SlideSwipe from chestwood96 on https://github.com/chestwood96/SlideSwipe. The new Front Cowling need 2 magnets in size 6 x 2 mm (need to modify probe to use same magnets) You…
you can print this file in parts, it is more recommendable
Adjustable version of the SlideSwipe top extrusion mount, quick to print and easy to raise and lower
This is a remix of the servo probe arm (Arm1.stl) and rail mount top (RailMountTop.stl) parts for the SlideSwipe probe for Voron v0.x printers by chestwood96. I bought a pack of five MG-90s servos from Amazon , which came with stickers…
Simple trimming of the SlideSwipe probe carrier piece, which allows using less y axis space for pickup and dropoff. Particularly useful when paired with my SlideSwipe top extrusion mount if you want to mod your voron 0 into a tri-zero
During my tests comparing different microswitches like Kailh, Omron D2F-01 and D2HW the latter showed better accuracy and better stdev. The issue however D2HW won't fit into slideswipe probe. Won't be good for regular D2F switches though.…
This is a remix of the frame mount (RailMountSide.stl) for the SlideSwipe probe for Voron v0.x printers by chestwood96. The original uses a snap-in approach to hold the SlideSwipe mount on the 1515 extrusion. This remix uses two M3 nuts…
One inch slide files include: Double slot (1DoubleSlot) Triple slot (1TripleSlot) Triple slot 1 inch double to 1.25 inch single [1(2)to1.25(1)TripleSlot) One and a quarter inch slide files include: Double slot (1.25DoubleSlot) Triple slot…
After installing the manta ray bed from hex-zero, I noticed that my slideswipe dock that attaches to the y extrusion won't fit anymore. To combat this issue I mirrored the entire assembly to allow mounting it towards the back of the…
Added three groves for PTFE 4mm tubes so the spools slides more easily on the holder.
This drawer support replaces the ones in wooden ikea chest of drawers
Manufacturing procedure: Material: PLA, PETG 3D Printer: FDM 3D printer, average print time 1 – 2 hours, depending on settings Slicer settings: 0.2 - 0.3mm layer height Post processing instructions: Clean the stringing Assembly…
Developed for my PhD work. Expansion tray for use with 30mm x 25mm x 1-1.3mm glass slides. This can expand the capacity of other slide holders made for standard thin-section sized slides or can be used alone for desktop organization.…
When tested with 15% infill PLA, it seems to be fine for typical beverage loads. I used a countersunk head screw with a diameter of about 4mm. Print Settings Printer Brand: Kingroon Printer: KP3S Rafts: No Supports: No Resolution: 0.2mm…
Son para 8 placas de 25x76x1mm. La ranura donde encaja es de 2mm.
This is a small sliding box that I designed specifically for photo slides, but it can be used for anything that fits inside of it.
Simple Curtain Hanger Slides, easy to print and perfect for replacing or adding slides to your curtain system. No suppor
I recently ran into some problems with the servo and had to take it apart again. This mount temporarily serves the same function as the rotating one. It also adds 3mm play on the mounting holes in order to make it easier to calibrate the…
NEW VERSION HERE! https://www.printables.com/model/801506-slideswipe-adjustable-top-extrusion-mount-with-cab When upgrading my Voron 0 to a tri-zero I wanted to keep using my SlideSwipe probe. This meant moving the motor attachment from…
This is a 9 slide case for projectors that use image slides. I created it to hold my galaxy slides, so it's space themed! There are 2 tolerances included for the inserts. It should be a tighter fit, unless you want to use glue (I didn't…
A remix of the excellent inverted Steam Deck Dock by Strider460, this version had additional space built in to allow for the installation of antiscratch slides. The interior dimensions were based on using the sick-on floor protectors…
A holder for the Smart Cards/Slides that come with the Microscope. Design need to be glued on (I used doublesided tape on the curved part at the front). I printed it with the angled bottom of the holder flat on the bed and used support.
I designed these inlets to fit glass slides into standard pipette tip boxes, perfect for wet chambers or storage. Compatible with: TipOne brand boxes Slide size: 22 × 50 mm These inlets keep your slides secure, greatly reducing the risk…
I've used these https://www.junker-slides.com/full-extension-slides-kv1-25-h35-l350-nf-350-mm.html slides, but using the scad file it should be easy adaptable to other slides.
This is a diffy assembly using axon bevel gears for a gobilda viper slide. There is .step and .3mf provided. If you have questions reach out to us on our website or instagram.
Build with Raspberry PI Zero 2W and a Spotpear Touchscreen - RPI-Touch-Case bundle You can find build instructions on my Github I used something like This to cover the screws at front You only need screws that comes with the touchscreen -…
These are designed to have a wood front attached that matches whatever furniture you're attaching to. The slides are basic groove fit. The rear can either be wood again or printed (depending on max print bed size). The bottom of the draw…
Masking slides for making double exposures with Polaroid SX-70 or 600 type cameras. Slides A and B expose inverted areas of the film. Print Settings Printer Brand: Prusa Printer: Prusa i3 MK3 Rafts: No Supports: No Resolution: 0.1 Infill:…
Deckel Lid für https://www.printables.com/de/model/599449-slidesolver-sliding-puzzle-game-with-30-different- Einfach in die Löcher 5x1 Neodym Magnete einkleben und in das Original GameBoard die Gegenstücke. Evtl. erstelle ich einen Remix…
I made this mount to hold various accessories on top of my print head. I have also included the blank slide so that you can modify it to hold whatever you need it to. If you make your own accessories please post them as a remix, I would…
This is a case that can store 48 film slides with a frame to hole the film, the designed volume for the film slides is 50x50x4mm. 24 slides can be stored on each side.
Coffee table welded from 18x18 profiles - it scratched the floor when moved. And on the carpet - it was hard to move it. I got these legs. Steel profiles that I bought to build a table - they were supposed to be 18mm x 18mm, in reality…
The spacers have an upper recess for the cover glass. They can be permanently attached to the slide and to the cover glass by using UV resin. The cover glass size and it's overlap with the spacer, and the number of spacers, and also the…
I've bought the prepared slides for microscopy here https://aliexpress.ru/item/4001085329229.html The slides came in the wooden box, but the incert (holder of the slides) was broken. So I made this incert. It is tight fit inside the box.…
