Wyniki wyszukiwania: sml

Sortowanie

55 modeli

P
PrintablesHow To Homemade

PrismLume | Hexagon WLED Ambient Light Panel

Things you wanted to know before: Be aware of the effort involved in this project, you can't just put everything together in 10 minutes. You should also be good at soldering and know how to handle cables. It took me about 3 hours to…

Pobrania
1475
Polubienia
1511
Ocena
4,88
P
Printablesolekhal

smlight slzb-06 wall mount

The included screws with the slzb-06 for surface mounting looks small, and easy to rip out when removing the adapter. This mount solves this by using 3x16 or similar countersunk screws. For anyone using imperial, a screw with ¼” head…

Pobrania
723
Polubienia
63
Ocena
5
P
PrintablesGlen Bayley

SMLight SLZB-06 / SLZB-MR Wall Mount

This is a wall mount for SMLight SLZB Zigbee Ethernet USB LAN adapters. Mount the frame first, then snap in the adapter Designed for #6 or #8 screws It is easy to install and remove. Update : I released a remixed model to mount with 6mm…

Pobrania
716
Polubienia
79
Ocena
5
P
PrintablesMatthew Forde

Bookmark - SMLE

A simple bookmark that shows a Short Magazine Lee Enfield Rifle on the outer face and which uses a fin to separate a book's pages. An easy print, this rifle is amongst some of the most well-loved by military history enthusiasts and gained…

Pobrania
257
Polubienia
57
Ocena
5
P
PrintablesSebastian

SMLIGHT SLZB-06 Rack Mount

Simple design to hold SLZB-06 Coordinator in place. Model is symmetrical - can be flipped/rotated to use it on the other side of the rack.

Pobrania
241
Polubienia
28
Ocena
5
P
PrintablesSlpyLaw

Power Meter mMe4 SML Adapter for bitShake SmartMeterReader

This 3D model is an adapter housing designed for the board of the bitShake SmartMeterReader availible on Amazon https://www.amazon.de/dp/B0CCMXSPVX , now integrated with Home Assistant using pre-flashed Tasmota firmware for enhanced…

Pobrania
232
Polubienia
6
Ocena
4,5
P
PrintablesTreoWayne

Wall mount for smlight SLZB-06 PoE Zigbee coordinator

This is a wall mount designed for the smlight SLZB-06 PoE Zigbee coordinator. It might work for some other smlight models as well. The units have screw keyholes, but I lost the included screws and all the screws in my collection were too…

Pobrania
213
Polubienia
14
Ocena
5
P
PrintablesTreoWayne

smlight SLZB-06 PoE Zigbee coordinator rack mount

This is a server rack mount bracket for an smlight SLZB-06 PoE Zigbee coordinator. You will need a couple of M3 heat set inserts and a couple short M3 machine screws in addition to whatever screws actually connect the bracket to the sides…

Pobrania
181
Polubienia
26
Ocena
0
P
Printablescrazy_format

PrismLume small and medium version

This is a small and medium version of PrismLume. Small has side of 3 leds only, so in total you will need only 19 leds and it prints super fast. Medium version has side of 6 leds and in total you will need 91 leds. Use caps from the…

Pobrania
142
Polubienia
56
Ocena
5
P
PrintablesTheWoodser

SMLIGHT SLZB-06 Minimalist Mount

I designed this minimalist mount to hold my SLZB in a number of different orientations.

Pobrania
140
Polubienia
15
Ocena
5
P
PrintablesHitm357

SMLIGHT SLZB-06 Skadis mount

IKEA Skadis mount bracket for smlight slzb-06 zigbee coordinators

Pobrania
125
Polubienia
8
Ocena
5
P
Printablesflipsht

PrismLume 7XL

Here is my take on a XL 7 panel version of the PrismLume project by How To Homemade I had a large space on a wall to fill, so i made it bigger! A few things to note: You need to use a ESP32. ESP8266 does not have enough memory. As the…

Pobrania
97
Polubienia
49
Ocena
5
P
PrintablesSebastian

Modular SMLIGHT SLZB-06 Rack Mount

Can be mixed and matched with: blank panels: https://www.printables.com/model/898351-rack-mount-empty-panels-small-printer-friendly patch panels: https://www.thingiverse.com/thing:5243621 Mikrotik CRS305 shelf:…

Pobrania
78
Polubienia
16
Ocena
0
P
PrintablesGlen Bayley

SMLight SLZB-06 / SLZB-MR Magnetic Mount

This is a magnetic mount for SMLight SLZB Zigbee Ethernet / USB LAN adapters. It builds on my original screw-mounted design, but replaces screws with press-fit magnets. If you prefer to install with screws, check out the original version…

Pobrania
74
Polubienia
15
Ocena
5
P
PrintablesEpisode 3D

SMLIGHT SLZB-06/MR1 Multiboard mount

It’s a remix of the SMLight SLZB-06 wall mount, redesigned for use with the Multiboard system via Multipoint . It's compatible with the SLZB-06 series (with Ethernet) and SLZB-MR1 (multi-radio) adapters. For mounting onto Multiboard, I…

Pobrania
73
Polubienia
9
Ocena
0
P
Printables3D Garage

Bottom Connector SMLIGHT SLZB-06 for Modular 10" Server Rack! - Mod10

Bottom Connector SMLIGHT SLZB-06 for Modular 10" Server Rack! - Mod10

Pobrania
63
Polubienia
16
Ocena
0
P
Printablesdym801

Zigbee Smlight slzb-06 wall mount

Support à visser pour antenne zigbee smlight slzb-06

Pobrania
62
Polubienia
8
Ocena
0

SMLE (Short Magazine Lee-Enfield) for LEGO Minifigures

w/Bayonet https://cults3d.com/en/3d-model/game/smle-short-magazine-lee-enfield-w-bayonet-for-lego-minifigures W/Grenade Launcher https://cults3d.com/en/3d-model/game/smle-short-magazine-lee-enfield-for-w-grenade-launcher-lego-minifigures…

Pobrania
62
Polubienia
9
Ocena
0
P
PrintablesVoronwë

ESP and cable guide for PrismLume

I build the very nice Prismlume (https://www.printables.com/model/836762-prismlume) by @How To Homemade , but I missed a place to mount the ESP32 board and get rid of the wireloom. So I created this model. It holds the ESP32, guides the…

Pobrania
49
Polubienia
13
Ocena
0
P
PrintablesAnsh

SMLight SLZB Command Strip Mount

This remix was tested with a SLZB-MR3U and the original was made for SLZB-06. I guess it fits all SLZB devices. The 0.6mm model has a cut fit for regular command strips The 2mm model has a cut fit for velcro command strips

Pobrania
48
Polubienia
5
Ocena
5
P
Printables46bit

PrismLume remixed

This is a remix of the original PrismLume designed to be easier to manufacture. Main highlights: Enlarged the bezel so that you can solder much longer wires, making it much more accessible to people bad at soldering like me Added M3…

Pobrania
43
Polubienia
13
Ocena
5
P
PrintablesBuzz

Power Meter D1 Mini SML Module

Little adapter to mount a D1 Mini (ESP 8266) directly onto the power meter I used a 5mm Photo-transistor (BPW 40) to monitor my smart meter IR output I used 12pcs 6mm x 1mm magnets from Amazon together with a DIN 125 M16 washer to…

Pobrania
38
Polubienia
5
Ocena
0
P
PrintablesVibex

Jeffy SML Keycap

Keycap of Jeffy from SML for your keyboard! If you want to commision something, DM me :)

Pobrania
35
Polubienia
0
Ocena
0
P
PrintablesEduard Sukharev

PrismLume 3x3 and 6x6 base with convenience cavities

This is a modified version of small 3x3 and medium 6x6 bases by @crazy_format. It gives more room for wiring and also adds a cavity at the bottom to put your ESP2866/ESP32 module into. The wireless module cavity should fit any reasonably…

Pobrania
34
Polubienia
3
Ocena
0
P
PrintablesYakir

ASML Logo Keychain

ASML Logo Keychain

Pobrania
33
Polubienia
0
Ocena
0
P
PrintablesOxmstr

PrismLume base without heat set inserts

1.7 mm holes in the base for direct mount of M2 bolts or 2 mm screws. Added hole in bottom left to route the cables.

Pobrania
23
Polubienia
1
Ocena
0
P
Printableshoward

Neck Tie Clip ASML

simple neck tie clip but i added some letters and cut them through. Its hard to print that ‘A’ without support for the hold in the A.

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesFraat Ramski

Tasmota Homematic Home-Assistant Stromzähler Powermeter Smart-Meter SML

asmota Description Smartmeter: https://tasmota.github.io/docs/Smart-Meter-Interface/ You need: i.e.: Wemos d1 Mini…

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesPatryk Mucha

ASML logo

ASML Logo based on EXE 5000 EUV machine Two plates - Sign should click in into position so no glue needed. But it could be hard :) Use glue or double site tape to stick logo in your office :).

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesOxmstr

PrismLume ESP8266 backplate mounting

A small backplate to attach a ESP8266 to. Can either be powered via the USB cable. I've drilled out a small hole in bottom left corner to connect the cables to the MCU. Attaches with 3 mm or similar screws or bolts, with additional 2 mm…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesTheSteamingHeap

SMLight SLZB-Ultima Wall / Ceiling Mount

Wall (or ceiling) mount bracket for the new SMLight SLZB-Ultima . It's definitely a 'don't let perfect get in the way of good enough' box. I just needed something quick and basic to mount the device in my loft. It will accommodate all…

Pobrania
16
Polubienia
5
Ocena
0
P
PrintablesAhmed Max

SMLIGHT SLZB double radio 1u 10 inch rack panel

Since i couldnt find any models that solve mounting the 2 radio SMLIGHT panel for a rack i made one myself. Printed without support needed. It locks by the top panel and gets fixed in place Tested with SLZB-MR4U, but in theory it should…

Pobrania
14
Polubienia
1
Ocena
0
P
Printablesadsehgal

ESRack - Module - SMLight Zigbee Stick with Keystone Jack

Allows to mount the SMLight Zigbee sticks on a standard rack with the ESRack ecosystem. Also allows a keystone jack to installed for the zigbee stick. The zigbee stick is friction fit into its slot with no other support or lock in…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesYakir

Laptop stand with ASML logo

Laptop stand with ASML logo, I print it with selective support on the overhangs but maybe it will be OK without support. layer 0.3 infill 6% with Brim width of 3 mm print speed of ~16 [mm/s] at the overhangs

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesChris vK

SMlight SLZB-M06 Wall Mount with USB-theft protection

Originally I just fixed my SLZB-06 with a Powerstrip. Unfortunately it happened a few times that someone just stole it the USB-C Power. So ich found this great design, which was equipped with the Fusion-file and designed a simple theft…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesLfgberg

SMLIGHT SLZB-MR* Dual Radio Rack Mount (MR5U/MR5/MR2/etc)

Remix of the SMLIGHT SLZB-06 Rack Mount with added cutouts to accommodate dual-radio Zigbee coordinators. Tested w/MR5U but should work with all dual-radio models in the same footprint. Printed in PETG; recommended to use PETG/ASA or…

Pobrania
12
Polubienia
4
Ocena
0
P
Printableslbrmnk

Blender SSML 1000 A1 middle part

Spare part for Lidl blender. The original part cracked. Printed in PETG, 5 perimeters, forced supports under overhangs.

Pobrania
12
Polubienia
0
Ocena
0
P
Printableseloekset

Smlight Zigbee Multiboard Brackets

Brackets that slide onto Multipoint connectors and wraps around an Smlight Zigbee Adapter . The brackets should slide in from each side on the device to avoid braking.

Pobrania
11
Polubienia
4
Ocena
0
P
PrintablesLink

SML2: Golden Mario Coin

Click here for The Stylized Version on Cults3D

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesQuentin

SMLight SLZB-Ultima press fit holder

SMLight SLZB-Ultima Press-Fit Holder Dimensional Accuracy Note: The clip pins are designed tight. Depending on your material shrinkage or machine calibration, you may experience a ~0.3 mm variance (tested on an Elegoo Centauri Carbon V1…

Pobrania
9
Polubienia
2
Ocena
0
P
Printableself1231

SMLight SLZB-Ultima 19-inch Modular Rack Mount

This mount is part of a 19-inch modular rackmount system designed by @Mauker , combining @bernardm_335497 design of SMLight SLZB-Ultima Wall / Ceiling Mount. You can mix and match the modules with other mounts. Take a look at his models…

Pobrania
9
Polubienia
4
Ocena
0
P
PrintablesYakir

ASML Machine style Keychain

A keychain with the ASML logo that is designed to resemble a machine-look product line. There are 2 files: machineShape.stl - This part can be print as one body with/without color change. machineShape_BASE.stl - This part is designed for…

Pobrania
8
Polubienia
0
Ocena
0
P
Printablesflazer

POE SML Smart energy meter

POE SML Smart energy meter While experimenting with a ready to go IR smart meter reading head, I realized that the Wi-Fi signal in my main electrical distribution box, which is made of metal and located in the basement, was anything but…

Pobrania
8
Polubienia
6
Ocena
0
P
PrintablesSam Schultz

SMLIGHT SLZB06 Wall Plate Zigbee Etc. Antenna Mount

This is a nice way to mount a POE SMLIGHT coordinator to a normal box, I wanted something that would clean up the wiring nicely but look really well done. Print the keystone assembly with the flat part of the circle on the bed, print the…

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesXylen.C4

ESPHome Smart Meter SML case

It uses a Ring Magnet 27 mm + TTL IR Board Read/Write Head for Smart Meters (Volkszähler) It uses a 650 mAh 603040 for Standalone without active supply.. Split the STL in your favorite slicer to get the printable parts. Category: Household

Pobrania
5
Polubienia
1
Ocena
0
P
Printablesnzt2afrb5e3y

SMLIGHT SLZB-MRxU wall/HSW mount

how to print 1 universal model provided. The screw gaps have been calculated to match HSW's lattice. Print with the bottom on the build plate, as provided. No supports required. Electronic devices can get quite warm. Do not print in PLA.…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesFuWeissinger

ESPHome SML Smart Energy Meter Reader with display

ESPHome SML Smart Meter Reader Read your electricity meter through its infrared port — no direct mains wiring required! This build combines an affordable ESP32-C3 with OLED display and a BPW40 photodiode right on your meter. All values…

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesMosher

Magnetic Case for SML over Matter/Thread IR Meter Reader

A 3D-printable case for mounting the SML over Matter/Thread infrared reader onto your electricity meter. Four neodymium magnets hold the reader in place over the meter’s optical interface. The reader uses an ESP32-C6 to read SML data via…

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesSpeeter

Magnetic Smart Meter readinghead for phototransistor (SML -> ESPHome, Volkszaehler etc.)

Simply add a magnet and electronics and start reading data from your power meter! Kompatibel mit den in Deutschland verbreiteten Smart Metern. Eignet sich z.b. für die Nutzung mit ESPHome + Homeassistant mittels eines ESP8266/ESP32 und…

Pobrania
1
Polubienia
1
Ocena
0
P
PrintablesJaroslav Tichý

Schrána smlouvy

Schrána smlouvy

Pobrania
1
Polubienia
0
Ocena
0
P
Printables

SMLight SLZB-06 / SLZB-MR Wall Mount

This is a wall mount for SMLight SLZB Zigbee Ethernet USB LAN adapters. The SLZB snaps into place and stays secure. It is easy to install and remove. Update : I released a remixed model to mount with 6mm magnets . So far, this mount has…

P
Printables

ESPHome Smart Meter SML case

It uses a Ring Magnet 27 mm + TTL IR Board Read/Write Head for Smart Meters (Volkszähler) It uses a 650 mAh 603040 for Standalone without active supply.. Split the STL in your favorite slicer to get the printable parts. Category: Household

P
Printables

SMLight SLZB Command Strip Mount

This remix was tested with a SLZB-MR3U and the original was made for SLZB-06. I guess it fits all SLZB devices. The 0.6mm model has a cut fit for regular command strips The 2mm model has a cut fit for velcro command strips

P
Printables

SMLight SLZB-06 / SLZB-MR Magnetic Mount

This is a magnetic mount for SMLight SLZB Zigbee Ethernet / USB LAN adapters. It builds on my original screw-mounted design, but replaces screws with press-fit magnets. If you prefer to install with screws, check out the original version…