Sonos Move 1 & 2 wall holder
Wall holder for the Sonos Move 1 & 2 speaker. Optional plug for the lower holes for hiding the screws. Screw holes are 4mm. Print it standing up (maybe with brim), no supports needed.
- Pobrania
- 888
- Polubienia
- 76
- Ocena
- 5
180 modeli
Wall holder for the Sonos Move 1 & 2 speaker. Optional plug for the lower holes for hiding the screws. Screw holes are 4mm. Print it standing up (maybe with brim), no supports needed.
We designed this print with screw holes for the hooks, such that the mounting screws hold the mount together. This means that the design does not need to be glued together. If you would like to buy the Sonos One Wall Mount , you can check…
No supports required, print parts as oriented.
I was using the cheapest PLA on the planet because you will not see the holders behind the speaker. But I'm pretty sure the print quality can be improved with better filament and maybe supports (haven't tested). CAUTION! Definitely print…
Vertical wall mount for Sonos Roam
Here I designed a Wall mount for the new Sonos Era 100 speaker. It is able to tilt it downwards and you can rotate it freely. There are 2 channels for the cable. Screw the Holder with 2 x M4,5 Wood screws to the wall, then mount the…
I recommend PETG due to the heat. I initially printed in PLA but the heat from the amp eventually deformed the PLA one so you may want to use PETG or some other higher temperature filament.
Wall support for Sonos Era 100 speaker. The speaker orientation will be perpendicular to the wall (it's not exactly round, so you can not rotate it). It requires 3 screws in the wall (check images for hole-distances) plus one M5 screw for…
A small extension to the original model to make it wall mountable with support for 3 screws. I tried command strips but the speaker was too heavy(and concentrated) so drilling works better. There is room for the power cable to be…
Compatible with the White & Grey original Sonos Connect:Amp. Doesn't work with the newer Black Sonos Amps. Specifically designed for stacking multiple amps close together. Featured in this LinusTechTips video: Also included is our model…
Sonos one Gen 1+2 Corner wall mount. Print in PLA with 4-5 walls, 30% infil. with a 0.2 mm layer height.
I printed my model in PLA with 25% infill. Support is required. The stand is stable and has a tight fit.
Currently all pre-made wall mounts are sold out. So I tried to make my own. 40mm clearance from back of speaker to wall (sonos recommends minimum 25mm) Embedded steel bracket (90x90x40x3 mm). As the speakers are placed above the heads of…
This is a very simple mount that holds the roam in place with light pressure from the prongs sticking up. It is intended to be stuck down to a surface using 3m double sided strips. But can easily be modified for screw holes. This initial…
We have one surround wall-mounted and the other on a small side table. I made a stand for it to sit at ear level. I printed it with 5% gyroid infill, and it's strong enough—no need for more material. The radii aren't G2 curvatures, but…
The original wall mounts from Sonos hasn't arrive in the shops yet. And I needed a quick solution so i could use my new pair of Era 300 as surrond speakers in my living room. Not a sexy design, but they work fine. You need 2x M5 screews…
The case uses tabs with 4mm holes to attach paracord. Designed to be easily clipped to a backpack or hung around campsite. Access hole for USB-C port and power button on back. Used supports for front top overhang, the tabs to not need…
Enhance your audio setup with this custom-designed SONOS ERA 300 wall bracket, enabling a full 360-degree rotation for optimal sound direction. Tailored to the sleek contours of the SONOS ERA 300, this mounting plate ensures secure…
Sonos ERA 100 wall mount consists of 4 parts, which are connected to each other with the help of Allen screws a standard ruthex M3 heat inserts. M3x8 cylinder head - 4pcs M3x10 tapered head - 4pcs Recommendation for printing: nozzle 0.4…
Horizontal wall mount, slightly tilted with some extra space for the usb cable. It is ment to be permanetly connected to electricity, as the on/off button is covered by the wall mount.
fits with or without the original charger
This quick and easy print is for mounting your sonos ray to your wall. Required hardware: 2X M5 screws for the sonos ray Superglue to glue the 2 halves together with the middle piece Mounting hardware for hanging the mount to the wall…
This is meant as a stand for the Sonos Play:1, which will also allow you to coil up the extra cord within it. The stock cords that came with my Sonos are designed to stick straight out the back while sitting flat on a table, so this does…
Super Simple print to get those speakers on the wall. Notes: Import the two pieces into your slicer. Pick your colors Place the shelf upside down and the swivel upright. Print PLA or PETG Attach to the wall with appropriate wall anchors…
I needed something that would clear the mount for my monitor arm so my beam could sit further back on my desk. This uses the mounting holes at the bottom of the beam with 2 m3x16 screws.
I wanted to mount an oldie but goldie SONOS Play:1 speaker in the kitchen. A plain shelf would have done the job, but the cable mess would not have disappeared - that's why I have designed this one. I have uploaded two helper items too:…
I got the new Sonos roam and wanted a wall mount. So I designed a simple version so that it can be placed with the front facing towards the listener and with enough room behind the speaker for the charger cable. I hope you like it. PLA is…
This is a Sonos Roam holder that takes the place of the bottle holder (bottle cage) on your bicycle. It should fit standard bottle cages and use the M5 bolts that come with your bike, but I left some wiggle room for the bolt placement. It…
Sturdy shelf for Sonos play 5 gen 1 speakers. I had them on these Flexon standards(https://www.flexson.nl/product/sonos-play5-1gen-standaard-wit/), but decided to wall mount them. I incorporated the top shelf of the flexon standards, but…
https://www.printables.com/de/model/688769-hook-for-vw-california-interior
This is a model for the Sonos Ray that elevates the speaker slightly off of the desk-top. It tilts the speaker at a 3 degree angle from the plane of the desk, and provides clearance underneath for keyboard/mouse wires, as well as…
Here is my simple solution to have a little more space on my work surface. The buttons of the Roam can still be operate
Rotating Wallmount for the IKEA Sonos Speaker: SYMFONISK Additional Part needed: corner brace (DE: Winkelverbinder) Dimension: 90x90x65x2,5 2 Screws: M3x8mm with countersunk (DE: Senkkopf) 3 Parts: Symfonisk Groundplate (Extra Perimeter =…
Here is the link to the Sonos one model https://www.printables.com/model/596960-sonos-one-boolean-tool Printed with Overture Matte PLA Wrist down No supports .05 layer height (The detail is incredible) Lightning infill
You can simply print this model using PETG (more durable than PLA) and TPU. TPU is very useful to completely absorb vibration from Sonos diffuser. The diffuser is entirely supported by TPU. Maybe is a good idea increase fill density in…
This is a vertical wall mount for Sonos Roam, inspired by some great designs such as https://www.thingiverse.com/thing:4867644 or https://www.printables.com/model/380346-sonos-roam-wall-mount. Unfortunately those did not fit my needs, as…
Needed a wall mount for our Sonos Arc soundbar. Didn't want to buy one (and wait for delivery) so I spent 30 minutes designing one. My daughter wanted something at the time, so the design is a little rough since she's … persistent. But it…
A simple stand that turns your Sonos Era 100 into an upfiring desktop speaker! I wanted something lower profile that will fit under my monitor but still gives easy access to the capacitive touch controls, bluetooth pairing, and preserves…
This should be a pretty basic print with standard settings.
With these two clamps you can mount a Sonos Ray to a ceiling or furniture. Use two 15mm long M5 bolts to screw the mounts to the back of the Sonos Ray system. Both mounts should be placed 21cm apart (center screw hole to center screw…
I needed a wall mount for my Sonos One speaker that also concealed excess cord. The model can be printed without support. There are three parts to the model: brace, cord box, and top. Mounting the Brace to the Wall: Ideally, you want to…
As I wanted to mount my Sonos Port to the wall to hide it behind the tv shelf, I designed a wall mount. Links: Sonos Port:…
Created a tray to store your Sonos Roam on Skadis, but be free to move it around when you need it somewhere else (without needing to unclip it). Printed with PLA, 30% infill and print-on support for the hooks.
This is probably the smallest 3D printed wall hanger for SONOS Play 1 speakers. It's designed for both functionality, strength and aesthetics, with a small tilted angle of 15°. It consists of two parts: one that mounts to the wall with…
I found this Stand on thingiverse (https://www.thingiverse.com/thing:5371504) and modified it to fit my ATV and Remotes below .
There are 2 variants of the ZP120 bracket here. I highly recommend the one with lugs. As well as making the mounting easier the extra material stiffens the mount nicely.
For music lovers on the go - a perfect fit for the Sonos Roam portable speaker - this custom mount lets you attach your speaker to the “bottle cage” of your bicycle. This is a remix of the great design Sonos Roam Bicycle “Bottle Cage”…
Small stand with upward tilt to help with projection! (~8.5 degrees) Total height with Sonos beam on board is 105mm. ~20mm gap height in the rear. ~38mm gap height in the front.
Sonos Roam mount for the Ikea Skadis pegboards. Mounts with enough space behind to plug in the included cabled and leave you access to the function button. You will need to print with supports for the pegs to print properly.
A Version of the Sonos Active Case ( https://www.thingiverse.com/thing:4858266 ) with a space to insert MagSafe Magnets during the print. This then allows the Apple MagSafe charger to align and attach to the case to charge the Sonos Roam.…
I designed this because I wanted some extra charging bases for my Sonos Move but they're about $70 each for new ones. Knowing the charging base isn't anything more than an 18VDC power supply, pogo pins, and the base I wasn't going to drop…
A simple stand for the Sonos Ray soundbar. It is angled at 20 degrees and can be mounted to the back of the Ray using 2x M5 20mm machine screws. My print settings: Bambu Labs X1-C Bambu PLA Sparkle Green 0.2mm layer height 0.4mm nozzle…
Ein Moderner Lautsprecherhalter für einen Sonos One Lautsprecher. A modern speaker mount for Sonos One.
A simple trim piece for the base of the Sonos Era 100. Match your speaker for clean lines or go with an accent color!
Wandhalterung für meine Sonos One Category: Electronics
With this handy thing you can hang your sonos roam on your shower rack while showering. I would love to see your prints of my design.
SONOS Era 300 Mount heavily inspired by https://www.printables.com/model/824373-sonos-era-300-rotating-wall-bracket but remodeled both parts from scratch. I simplified all mounting hardware to only use a single type of fastener. Important…
Sonos Connect Amp Gen1 wall mounts brackets. Easy print, I did them at 0.3 layer height, no supports, with a brim in ABS for a fast print. Used #6 screws to attach to wall… Hope you like em.
Combine this model with other models to create Sonos one speaker stands or hats. Example remix linked below. Addams Family Thing https://www.printables.com/model/596978-addams-family-thing-hold-my-sonos
Needed a Sonos Roam mount but the one I found needed a lot of supports, this is a split model with two holes to join the model with M3 screws. You could also technically remix the mount and swap it out for something else, like a Skadis…
Sonos Roam wall mount bracket. Hole in the middle is to release vibrations (better bass) and to drain rain water when using outside. When doing so, use compatible filament to prevent warping due to heat from direct sunlight
Update 210622: Added a version for the Apple Magsafe charger, based on unreliable dimensions but should fit chargers around 18.3 mm thick and 82.3 mm in diameter. Also added is a version fitting chargers ar (or around) 101mm x 10mm.…
This is a simple wall mount Sonos roam that holds the Sonos brand charging base. Some supports are required, I used natural supports and it worked great.
My sonos one rear speakers was just too low placed, so i made some sonos sub inspired supports to raise them by 155mm. The supports have tabs that locks into the bottom of the speaker, and cutouts so power wire run thru the support.
Sonos One Sl 3d scan to make accesories ! Pleas tag me :D
I needed a easy way to mount a Sonos port to the inside helm of my boat to connect to my amplifier. By printing two of these brackets, you can cradle the port on the left/right side so that it won't move and will be secure. A lot of the…
Sonos Roam wall outlet mount, so you can have your roam plugged-in at places where you cannot place it. You can run the rest of the cable around the plug-cover, vertical beam is designed longer, so the cable is not falling off. Printed…
Attach a Sonos Roam speaker to a wall (or golf cart) with a powerful bar magnet. Recommended Material I recommend printing with a heat-resistant material, like PETG , if you intend to store it in warm places, like a car on a sunny day.…
Adaptor to make new speakers fit on an old stand.
I created this Stand for the Sonos Arc Ultra. Additionally, you will also need felt pads for the underside and two screws with a 5 mm thread. i reccomend to print it witch matte materials
I found my Sonos Roam speaker would accidentally slide off of its charging base. This print acts as a retainer that makes it less likely that the speaker slides off accidentally. Features: You can still easily remove the speaker by…
Untertisch Halterung für einen SONOS Port
I have printed it in ABS with a 0.4 nozzle using 4 wall layers and 5 layers top/bottom, resulting in zero infill. Top printed upside down, no supports. Base printed with support.
While ceiling mount is not a recommended way to mount sound bars, it may be the only location for some projector setups, where you need to mount it above the screen. This wedge allows installation of the original wall mount for Sonos Beam…
Download the most up-to-date version on MakerWorld: https://makerworld.com/en/models/184633
This is the double barreled pistol of Sonoshee from the animated film Redline! It is big, over 340mm tall. although you can scale it done to any size! Prints with NO support! Check out my Youtube channel for 3d printing videos and 3d…
Printed with Overture Matte Green PLA
Corner shelf to SonosOne speaker. Mounted with two screws.
A base for holding the wireless charger for Sonos Roam. I have designed this fix the annoying problem with the wireless charger sticking to the Sonos Roam when picking it up. The charger is too light and doesn't stay on the table when…
Thanks to Seth for the original design. My Era 300's are on top of my kitchen cabinets, but they have a 2" moulding at the top, so I needed to get them above that. I just added 2.5" of height to the original model. So I sliced it up in…
With this print, I cleverly bring together our Sonos Play:1 and an Anker USB charger to completely replace the mess of cables for many chargers. The solution consists of two pressure parts that are screwed stably and offers enough space…
A Philips Hue Play holder to hang behind the Sonos Arc soundbar. It clips into the small vents on the back of the soundbar. Printed with supports only for the three hooks. The Hue Play part is based one the work of @Jens83 with it's Hue…
Simple tile mounting stand that holds a Sonos Roam. Fits a suction cup with a roughly 14mm wide nub.
I designed this stand after testing different placement angles for the Sonos Era 100. Most desk setups either point the speaker too low or feel unstable, so I focused on improving both sound direction and stability. This version is…
This turns your Sonos Move into a phone holder. Features: Holds any device (in landscape) up to 10cm/3.9 inches wide All buttons and lights on top of the Move are still accessible You can still grab the Move by the handle and carry it…
This is a remix of the design from Weshape. I removed 6mm from the back side to place the speaker closer to the wall. It works just as well with the 2nd set of interlocking tabs removed but makes it shallower to the wall. Printed up with…
This is a bracket for sonos beam (Gen1) with large back clearance as I needed to curve a « hardened » hdmi cable.
This is a ceiling mount for the Sonos Era 100 speaker to be used in a 3-Phase Rails system. The mount is to be installed on a power adapter available here . Depending on the direction your rails is installed, you want to used the…
Minimalist outlet mount for the Sonos One Gen2 that holds the speaker inverted.
Build your own SONOS Amp (This Tutorial is based on a tutorial from this Link and this Video ) Note: This works for the IKEA SYMFONISK version 1 speakers. I don't know if this works for the current version 2 of the SYMFONISK speaker, as…
Wandhalterung Sonos Roam für die Steckdose. socket holder Sonos
I wanted to mount my Sonos Port on the wall in a cupboard, so I designed two bracket to hold it. Quick to print. Print on the back - no support needed. Mount with M3 screws.
Printed the original than noticed how much of the grill it covered. Didn't like that so found a way to cut it open more while still holding onto the unit safely. The original could be printed without supports, but this one will need them.…
Print with PETG at 90% infill with no supports, horizontal on build plate. Link to the screw used as basis for attachment listed below: https://www.mcmaster.com/90184A378/
The SONOS Roam is by far the best speaker to have in a kid's room (especially when you already have a Sonos system). Taking the speaker into the bed allows the creation of cozy sound “capsules” instead of having a speaker screaming from…
An angled sonos era 100 stand at 34 degrees. Use M5 30 mm screws to attach (and preferably a washer).
Sonos Play:1 Desk Mount with cable channel in the back. Just thought I would post these in case somebody else has the older version speakers and finds them useful. There is washer that fits a 1/4" pan machine screw 1/2" long(homedepot)to…
Hi I created a part of a holder for a Sonos jukebox for a friend. To hang it up you still need the brackets. But with these basic brackets you can prepare several points to hang it up. To make it more stable because of the layers, I…