305 modeli
Adapter to mount the Prusament bottle cage to Bugaboo Fox 3 strollers. Fasten the adapter to the bottle cage with M5 screws. Ideally the adapter should be a part of the bottle cage or cup holder, but this was the fastest way to do it.…
Wydruk około 0,44 €–0,54 € nettoWstępna wycena dla PETGMateriał u źródła: PET
When our little one had trouble sleeping, the gentle rocking motion in the stroller always helped. Annoying was only that he was always awake when the road was too perfect. With my rocking support you have reliable light rocking motion at…
Wydruk około 1,88 €–2,30 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Brzda kočárku Britax Römer GO NEXT / Brake pad for the stroller Britax Römer GO NEXT Nejlepší tisk s filamentem TPU 95A 1 kg Black / Best print with TPU 95A 1 kg Black filament
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
⚒ No 3D printer? No time to source components? I just opened my new e-shop where you can buy physical, ready-to-use versions of my models! Designed with passion, printed and assembled with care ⚙. 📦 Shipping across the EU: 👉 Get it at…
Wydruk około 1,50 €–1,83 € nettoWstępna wycena jednego wariantu
Baby stroller replacement for Break.
Wydruk około 0,63 €–0,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed for TFK Joggster Adventure. The holder prevents the cup from tilting in all directions and also uses printed “springs” to compensate for movements in the vertical direction. Dimensions Inner diameter of the holder is 75 mm. The…
I designed this hook to hang bags on our Mountain Buggy Duet stroller. This is a version with gyroscopic cupholder. To assemble it you need 4 M2.5 screws with nuts and to secure them I use Loctite glue. Hook_with_holder should be printed…
The THULE URBAN is a jogger pram and the child lies more in the pram than sits. If you also use the carrycot for leisurely excursions and want the child to enjoy the view, you may occasionally want the child to be able to sit nicely…
The most upright backrest position on the Thule Urban Glide 2 stroller is too reclined. This gadget props it up higher. It's based on the ingenious design by @Thomas_157995 which is really clever and well done. I've used one of Thomas's…
Cup Holder for Thule Urban Glide stroller. Simple solid cupholder form with beam lock. It is designed to hold coffee cup up to 660 ml (22oz) or bottle with outside bottom diameter up to 70 mm. Update Rev 1.0 Cupholder and lock version…
A convenient hook for the horizontal metal bar on Thule Chariot and Urban Glide strollers (might also fit other models). Useful for helmets, jackets, bags, toys etc. The hook snaps securely onto the bar. I printed using black PETG from…
EDIT: uploaded v2 - lower height to 9 mm (enough) and adaptors with longer distance so you can put Thule back raiser in-between. We just bought Thule Urban Glide 2 stroller and actually the stroller needed some upgrades. Already found…
Thule Chariot and Urban Glide cup holder adapter for the Bugaboo cup holder (https://www.bugaboo.com/us-en/accessories/holders-and-trays/bugaboo-cup-holder-MI001906.html). The adapter is designed to fit the Bugaboo cup holder, but can…
Designed for Valco snap4. But the clip is adjustable for various models. Phone holder is removable. Use at your own risk as it is much easier to “pick the phone” Models are ideal for adding text such as Names, … No supports needed.…
I wanted a phone mount for the stroller and couldn't find one so I modified an existing bike mount. The main issue with the model I based this mount on was that the top bar of the stroller is much too thick to mount on and when mounted on…
Does your significant other keep buying trending water bottles but has no where to put them when taking walks with the little one? Fear not, this water bottle holder will secure even the largest trendy water bottles. Might work for other…
Print with PETG, put it together and color it with acrile colors. Mount it on Stroller handle grip with 2x zip-tie. You can print 4 different heads at the same time with MMU.
Prints in one piece - no assembly or screws required. It slots onto the right-hand side of the Joolz Air+ stroller where there is a little notch, as shown in the video. It rests on the bar, not the notch, so it should be pretty strong.…
🍼 Cup & Phone Holder for Cybex Stroller – 3D Printable File (STL/3MF) Designed to match the modern aesthetic of Cybex strollers 📱 Phone Slot Specs: Fits phones up to 80mm wide and 12mm thick 🥤 Cup Holder Specs: Diameter: 70mm – ideal for…
The wheels are turning. Print and paint with acrilic colors or print with coloring in PrusaSlicer I printed Z=0,3, PETG. using MMU2S, Organic supports
For all the other the basic moms that have a giant Stanley quencher and a Mockingbird stroller … I dinged my Stanley quencher because it did not fit well in my Mockingbird stroller, so here is gravity holder that will hold that humongous…
This is a simple cup holder for Cybex Balios S stroller. It was made in FreeCAD and the file is attached. Diameter and height are configurable and can be changed in ‘master_sketch’.
This is an umbrella attachment for a baby stroller. The attachment is meant for a full-size umbrella, but I've included an adjustable version to fit smaller umbrellas. The design features a quick release for the umbrella allowing you to…
I (accidentally) printed this cup holder https://www.printables.com/cs/model/130989-cybex-cup-holder with this adaptor https://www.printables.com/cs/model/204281-thule-stroller-cup-holder-adapter and it does not fit each other at all.…
Why we made it: This stroller organizer has room for the fat bottom tumblers that never seem to fit ANYWHERE! It also has a cup holder with slots so sippy cups and even coffee cups can fit without the handles preventing it from seating…
We wanted to add a cupholder to our baby stroller which fits all sorts of cups and baby bottles. The cupholder is mounted on the left and/or right inside of the handle. There is by default a mount (knob) there. Cupholder fits Philips…
You'll need CA-glue and 4x M3x8 or M3x10 bolts. First attach the C-part to the frame Then glue the mounts, otherwise the glue will crack when you put the C-part on. The frame mount doesn't get in the way when folding the frame and has no…
Cupholder for Britax Smile 3. Probably works with other strollers with a “button style” mount. Made to fit a Hydro Flask ~75mm and slim sodacan ~58mm with adapter ring. Easy print with supports.
Cup and phone holder for Cybex stroller Two different design evailable both tested, checked and work A practical cup holder for a stroller compatible with Cybex strollers. Ideal for walks – allows you to always have a drink at hand.…
Bottle holder and accessories for stroller or bike. can be mounted on frames from 13mm up to 33mm. MATERIAL: 1 x 5mm X 40mm screw, 1 x 5mm bolt Infill:60% with PLA, without support. easy print
The system contains two cupholders: The Beast - named after its monstrous appearance, works with a gravity-triggered locking mechanism and lets you hold most sizes of beverage containers (from a very small coffee cup to a large pint of…
Version 2 of the “ Thule Stroller Flag Holder reloaded” ! An additional slot has been added dedicated to the extension rod provided by Thule. It is very much recommended to use the extension rod in order for the stroller to be more…
Pro správné fungování je potřeba do modelu vložit odpovídající šroub, který stáhne svěrku.
Cup holder for Doona strollers. Can fit larger jug style water bottles with the handle notch. Or can be used with smaller bottles / cans. Attaches to the notch near the top of the handle. It can be a little noisy if you have a can…
Uppababy Minu v2 stroller cup holder I was looking at buying a cup holder for the stroller, and they were expensive. I designed this instead. Features Easy snap-on and removal to/from stroller Securely attaches Fits a variety of bottles,…
A hook for hanging a shopping bag to the stroller or shopping cart with optional locking lever. I design this hook for my dog stroller/shopping cart to hang a few shopping bag, I've included a Fusion360 source file so you can modify to…
Rather than buy a whole new cup holder just for the clip, I designed a replacement . I printed it with PLA in the same orientation as the STL file (otherwise I think the post and/or arms could shear off too easily) with generated supports…
This AmptUp.org phone holder is intended to be used with our clamp which can be found here: https://www.printables.com/model/877736-medline-and-universal-wheelchair-clamp-for-cuphold This allows you to attach a phone to your clamp on your…
Simple Cup & Phone Holder for the Agio Baby Stroller by Peg Perego. Our stroller has a little pin on both sides of the handle, and this cup holder slots over the pin. See photos below. If your stroller has a similar pin, please comment…
This little clip attaches a blanket or towel to a stroller to provide some shade. The three models have a slightly different gap for one of the slots, such that they fit various strollers. I printed it in PLA with a 0.6mm nozzle at a…
First time making and uploading a model. Should be simple enough to print since it was built in 3D Builder. Original file from here: https://www.thingiverse.com/thing:4865742
This model is designed for all strollers with a wheel shaft diameter of 19 mm. For other dimensions, just print the holders in a different scale. Print all 3D parts. Print the PDF file, or edit SVG file for your own text. Cut out the text…
Deutsch: UPDATE 3: Ein (experimenteller) Halter für meinen Flaschen-Halter ( http://www.thingiverse.com/thing:3454127 ) hinzugefügt. Basiert auf die "big"-Version mit 26 x 5 mm Öffnung. UPDATE 2: Eine noch größere Version des Halters…
We needed a cupholder for our stroller . So first I look for the options that were available and my favorite was https://www.printables.com/model/644449-joolz-geo-stroller-cupholder sadly in our stroller the cup was tilting so I decided…
A sturdy cup holder that allows you to bring coffee to adventures with your young one. The cup holder attaches to the mount using a thumb screw so can be remove and reattach it without use of any screws. The mounting angle can also be…
Gyroscopic cup holder. The rings are modified from the original for better fit with screws, and nuts. Requires 2 12mm, 2 16mm M2.5 screws, and 4 M2.5 nuts. Use Loctite to secure screws in nuts. Print without supports. STEP files are…
A modular system to attach accessories to your wheelchair or stroller. I'm sure it could be of some use on bicycles too but I've not tested it with bikes and off-roading is possibly pushing it a bit far :D Some very ‘sensible’ accessories…
Get the 4-pack bundle on Etsy: https://cookystl.etsy.com/listing/4472354602/4-baby-shower-cookie-cutter-stl-set-4 Commercial license available here: https://www.patreon.com/CookyStl Add a sweet and adorable touch to your baking projects…
Stroller bottle holder + Adapter for round profile with a diameter of 28mm or adapter for rounded profile with diameter 30mm. you need 2x nut M4 1 hex screw M4-12 1 hex screw M4-20 or M4-16 No support need Adapter_12_R-XXmm.stl is first…
You can buy other adapters for bags online, but this one you can print yourself. Please post a make, if you print the mode. Happy printing from Munich, Germany.
You will need two M3x20 hex bolts and nuts. I recommend printing in PETG or something stronger than PLA, especially for the clip. I printed the clip with 100% infill.
I've seen some various designs but wanted one that was slim and fit well for my specific stroller! It uses a keyed interface between clamp and mug holder so should be pretty sturdy! If the flat head screw keeps getting loose just put some…
This is a cupholder in the style of GB stroller. Change the hole to fit your existing knob to attach it.
Easily attach your rockit to any stroller or bedframe. Single print can be attached in any feasible direction with just two zipties. Prints without supports easily if printed on the small, bottom base. None of the other existing models of…
Support for Thule Urban Glide 2 Double
Summary Simple but strong hook for ABC Design baby stroller Versions If you want to change the hook more frequently, I recommend choosing loose fit. If you want the hook to remain permanently, I recommend choosing tight fit. Print Print…
If you are looking for a simple solution to give your child a better view in the Thule Urban Glide 3 stroller, you have just found it. This support provides the desired upright position for your child to watch the world around them,…
A simple Coffee Cup holder for a pram/stroller with optional space for a wallet or mobile phone. I used M6 threaded rod with nylon lock nuts for the clamp pivot, locking nut and bolt to attach cup holder to clamp. Inbuilt threads are M6…
A spare wheel for a stroller called a golf cart. Rim diameter: 85 mm, thickness: 25 mm, tyre has a diameter of 113 mm. . The rim is made of ABS (but maybe more durable material can be used), the tyre is made of Flexfill 92A. The new wheel…
We have a Mockingbird stroller, and there is a lack of printable accessories for it, and this is at least in part because there isn't an easy accessory holder for it yet. So, here we have it. There are a couple of different versions…
This is your 3rd hand. A place to hang your bags while pushing the stroller. Very handy, though you should not trust the babys weekly supply of milk bottels to it, as it might break. But it's perfect to carry your recyling goods back to…
Yet another bag hook for you baby stroller. Fits oval tubing 29mm x 51mm. The two parts are held together with 2 x M4 screws. Additionally add a thin piece of rubber (old bicycle tube) for a better grip of the hook to the stroller body.…
Find version 2 of this model here ! It includes a second slot for the flag extension rod. If you are also annoyed by the position of the flag mount on your Thule Chariot (gets in the way of the handle if you want to flip it) then this…
this is a replacement latch for Uppababy Vista stroller
Cup holder for Cybex stroller Two different version available, both tested and checked and works A practical cup holder for a stroller compatible with Cybex strollers. Ideal for walks – allows you to always have a drink at hand. Designed…
Universal Stroller hook - strap 25 mm (1")
Bag holder for Cybex stroller Fits models: Priam, Mios, e-Priam, Coya, Balios S-Line, Talos S-Line, Melio-Line, Gazelle S, Eezy S-Line, Beezy Features and advantages: Lightweight, yet very solid Modern look - stylistically matches Cybex…
A simple cup holder for Easywalker Harvey 5 baby stroller with A sizing ring for smaller cups/cans. It is friction fit mounted. No tools or other parts required. Printing I've printed the cup out of Bambu's PETG Basic using minimal…
I designed this Flexible universal hook / toy hanger for baby stroller in SOLIDWORKS for the Printables Stroller accessories contest (15/04/2023). It's a quick & easy print, without supports, already orientated conveniently, in STEP, STL…
I use these clips on our stroller to protect our child from the sun. So far, I have printed numerous clips for friends as well. I am sharing the design here. Enjoy! Protect your little one from the sun with this innovative 3D printed…
Can clip into either side of the stroller. Print food tray in food grade PETG. Version 2: After significant R&D it was determined that the bowl needs retention otherwise you will be picking it off the ground every 2 minutes. Clips added…
Cup holder for Thule Spring stroller. Should also fit the Thule Shine. I printed with fuzz skin.
Hey there! I love coffee while going for a walk with the little one, which is why I designed this cupholder for a baby stroller. It's designed to fit an insulated Yeti mug of the size 295ml/10oz. The inner diameter of the cupholder is…
I made this stroller out of necessity. I am 6'2" and these tiny strollers had me either kicking the stroller or hunched over and hurting my back. The part fits over the existing stroller handle and snaps on to the metal. You will need 6x…
This adapter allows to clip the Bugaboo umbrella onto a Babyzen YOYO2. It requires a M3x16 screw and hex nut to clamp onto the side rod. Ideally, print a second mirrored version to be able to swap the umbrella between both sides. The…
Cup holder for stroller Anex Sport ENG: Hi all! I made my wife a cup holder for the Anex Sport stroller. She was very happy with it.The cup holder is quite strong and compact. For greater reliability, I printed it from plastic PETG. Even…
I designed this hook to hang bags on our Mountain Buggy Duet stroller. Prints with supports. You don't need any tools to mount it to the stroller, it just snaps on the centre pole. Also check out my hook with gyroscopic cupholder .
Adjust stroller frame size in pram_cup_holder.scad, variables pram_w and pram_h (elliptical shape) if needed. Dimensions of cupholder mount are compatible with original cup holder that came with our old Valco stroller. Mounts require…
Attach point diameter increased to 28mm diameter to be able to be attached to stroller handle.
A lovely fan which offers a cooling breeze that can be fully 3D printed (other than the motor, battery, and switch). Makes use of a snap-ball-joint system to create three articulating arms which can be conveniently flexed in a myriad of…
Self leveling cupholder that can be detached and stored in the front pocket on the strolled. Is made to fit Odder stroller Print instructions ( PLA & PETG suitable) Place the mount for the handle on the side and increase perimeter count…
Stroller skate for fun walks with your children, you both can use it! (obviously above two years) Wheel that i ordered : https://amzn.to/3og0Zkm but any 90mm wheel it's ok!
Print Material and Instructions Orient both parts as it shown on the screenshot. This will provide best constructional strength though final details requires some cleanup and finish. Keep your hobby knife and sanding paper handy to clean…
Large capacity, fits 32oz cups no problem with a low center of gravity. No supports, printed standard res.
We have an older model Uppababy Vista stroller. There are two locations that look like they were made for accessories. I printed https://www.thingiverse.com/thing:4610087 and then designed this clip to use along with it. Printed in…
A bag holder / hook for Valco Baby Snap 4 stroller. Although it has quite capacious basket it's sometimes not enough to carry all the shopping bags. The hook comes in handy. It may be suitable for other models of Valco Baby strollers. I…
This is a Stroller Fishing Rod Holder
Designed to fit the handle of a Mutsy Evo Stroller. For the actual cupholder, use the files of the original model. Maybe it inspires other people to design their own custom adapters. Printed in transparent Prusament PETG with organic…
Introducing the perfect solution for parents on-the-go - our stroller basket attachment! This convenient accessory is designed to attach easily to your stroller, providing you with ample storage space for all your baby's essentials. The…
Hooks to suspend Baby jogger stroller to the wall. Will fit any stroller or equipment with a 1-1/4" (32 mm) diameter handlebar.
There are people way more talented than me at designing. Rather than make “Just another _”, I decided to make an adapter so you can use any one else's model and clip it right on your wagon. I matched the original dimensions as closely as…
Required additional materials: recommended material is PETG 2x wood screw 2,5 x 12 mm (not needed for merged version) 2x cylindric magnet diam: 5mm height: 4mm (can be replaced with pen spring) piece of 2.75mm filament as hinges Printing:…
baby stroller model, i didn't print it. i thought to print it. prepare it (using AI - meshy and editing the result which was very broken).
If you have a baby like mine, you know what i mean, those fatty guys are always looking for speed and something to eat (I mean anything to eat) on their daily walks Easy Print with a 0.40 nozzle and 0.20mm resolution wont need more than 4…
An arm to fix in place my Phone Holder (HR-Imotion) for a Cybex Priam 3 Stroller. It is designed to be in a fixed angle since the holder I had lying around has a ball joint. I'm planning to make the angles adjustable. So, any phone holder…
hardware required: M3 8mm X4 print all part once then assembly should be straight forward
EN: This is a dock I have designed for our ABC Design Stroller “Salsa 4” or better said for the carrycot that is part of the set. I wanted to build a table for the living room with the docks attached on the top to easily use the carrycot…
Large bottle holder for Bumbleride strollers. The stock bottle holder is fairly small, this one is designed to hold a 32oz insulated water bottle, but will also hold large cups and bottles. Recommend printing with supports enabled, they…
New with twins Mom and I need hooks for the stroller so I designed this to use with a Graco Ready2Grow. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Infill: 50% Filament: SuperFila PLA Black Category:…
Description: This 3D-printed mounting bracket is designed specifically to attach a Puky balance bike securely to a Hartan stroller, making it easy for parents to transport both stroller and bike without hassle. The bracket holds the bike…
