Liczymy pasujące modele…
Have you noticed, that the printer is not working as expected? You can move the printhead without homing and it might crash somewhere. you can also move the base and its crashing if you reach the top. The reason is a not well programmed…
The Push-Lock Pins that you can buy from the store are made of Nylon, but I seem to be having success with PLA as it's what I have on hand. PETG may also be a good option. I've been printing with .2 layer height, 100% infill, automated…
Leviton supplies a shelf bracket kit that spans half the width of the media enclosure. This version provides a shelf with brackets to cover 2/3rd the width of the enclosure for wider objects. Printed with PETG, 0.4mm nozzle, 0.2mm layer…
Shelf for use with Leviton SMC cabinets. Slots on top and sides should allow you to use either tie-wraps or velcro straps to secure the items/devices to the shelf. Print standing on its side using tree supports. Created from scratch using…
These accessories are tailored for an Ethernet switch resting on the shelf bracket I designed https://www.printables.com/model/302365-leviton-structured-media-extended-shelf-and-bracke The retainer holds the top of the switch in place.…
The ones you can purchase are cheap and work well, but in a pinch why not just print a few? I used PETG for it's flexibility and printed at a 45º angle to not have weakness at the layer lines. Two of the files are straight up and two are…
A mounting bracket for a SiliconDust HDHomerun Duo tuner for Leviton structured media panels . I put my tuner in the basement where all of the cables terminate and the main ethernet switch lives. The tuner drops in through the top of the…
German below. Easy and quick to print! This is my idea of a beautiful, small, stable, light and resource-saving glasses stand. The main idea is not new, but I haven't seen such a glasses stand with a structured surface yet. The surface…
This is a custom bracket for mounting equipment in a Structured Media Enclosure (SME). The SMEs found in most residential homes are designed around Leviton components which are ridiculously over priced. The Leviton pushlock pins are…
UniFi Express mount for a Leviton Structured Media Cabinet . The holes are 5 inches on center. UniFi Express can be inserted right side up or upside down to best fit your application. The opening on the bottom is large enough for the…
This model allows for the horizontal or vertical mounting of the Ubiquiti USW Flex Mini network switch in a Leviton Structured Media enclosure. In the horizontal orientation, the switch can be inserted ports up or ports down without…
Note: This model was imported from Thingiverse where it originally used the “Customizer” add in. Fear not, it can still be customized by downloading the .scad code and open it using OpenScad! ------- Hats off to AndreasBastian's…
The Mesh Bowl combines a smooth, rounded interior with a precisely patterned outer surface inspired by a fine mesh structure. This contrast gives the bowl a technical yet elegant character, adding depth without appearing busy. Ideal for…
A mounting plate for UniFi power over ethernet injectors for Leviton structured media panels . Will accept up two PoE injectors. Works with either the older or newer model that come with the access points. Uses the Leviton push-lock pins…
106mm in diametre Work in progress, for now it is just a plate, I will later make it better to fit on the roof or a special lamp bracket. Category: Household
A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with…
This is a set of brackets to mount a QNAP QSW-M2116P-2T2S Ethernet switch in a Leviton 47605 Structured Media Enclosure . With a bit of work on the model in Fusion 360 you can probably adapt them to other network devices. You'll need to…
I was experimenting with changing the geometry of models to create surface structures, which distract from the layered look of standard FDM parts, while in contrast to fuzzy skin, retaining a technical appearance. Depending on the chosen…
Leviton supplies a set of rubber grommets to compliment their metal structured wiring media center. Unfortunately, they do not supply a medium size grommet for the medium sized knock-out. This threaded hole reducer fits through the medium…
SMC bracket for mounting [Netgear MS305/MS308 Multi-Gigabit 2.5 GbE switches into common Structured Media Cabinets. Supported devices include: Netgear MS305 5-port 2.5 GbE switch Netgear MS308 8-port 2.5 GbE switch This includes printed…
ldymanow's AC68U bracket is great. I wanted to put one in a Leviton structured media center but the existing holes didn't line up. I remixed the original to make holes 2" apart that would fit the standard 47615-NYL Leviton pins. Print…
A simple bracket for mounting a Ziply/Verizon/Frontied I-211M-L ONT in a Leviton structured media center. Requires 2 #8 panhead screws and two 47615-NYL mounting pins. The holes for the #8 screws are 70mm apart. Print Settings Printer…
A mounting plate for Raspberry Pi in the official case for On-Q structured wiring panels . I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives. Uses the On-Q push-lock pins , but you could use wood…
SMC bracket for mounting a Frontier GPON ONT model FOG421 into common Structured Media Cabinets. This includes printed mounting tabs for hanging the device, so no screws are necessary to be added after printing. Use the appropriate…
A mounting plate for Raspberry Pi in the official case for Leviton structured media panels . I made this to hang Raspberry Pi in the wiring cabinet where the main ethernet switch lives. Uses the Leviton push-lock pins , but you could use…
SMC bracket for mounting D-Link DMS-105 switches into common Leviton, Legrand, and OnQ Structured Media Cabinets. Supported devices include: D-Link DMS-105 5-port 2.5 GbE Ethernet Switch This includes printed mounting tabs for hanging the…
A bracket for a structured media panel to hold a NetGear GS108. I know there are improvements to make, such as something to hold the back end of the switch, so feel free to improve if you even want to. Just need two pins for structured…
This allows standard 50mm/60mm cooling fans to be mounted in the 2" knockout holes in the sides of structured media centers from Leviton, ICC, etc. M3 screws are used to attach the fan to the mount.
To improve airflow through my wall-mounted ICC structured media center, I removed some of the 2 inch round knockouts and added these vents in their place.
I replaced a metal 14x14 OnQ cabinet with a 14x42 plastic Leviton cabinet to support internal WiFi rounters. https://www.amazon.com/Leviton-49605-28P-Wireless-Structured-Center/dp/B07V2P99QG Mount for a 3.5" HD for network storage:…
The model on the picture is printed in Vase mode. For a more water-tight version, you should print it with 3-4 side and bottom loops/layers , no upper layers and no infill.
a "remix" I did of my structured vase REMEMBER TO LIKE IT if you share, collect or make it :-D Category: Decor
Porte cartes de viste à poser sur son bureau. j'ai pensé à la pyramide du Louvre en le réalisant. Quand on regarde le dessus, la pyramide et l'ouverture se mettent dans l'axe. Tous les éléments s'assemblent parfaitement, on eut rajouter…
This is a mounting bracket designed to attach a Ubiquiti UniFi Flex 2.5G 8 to a structured media enclosure. The mounting system is the same as the one that comes with the switch, so you can remove the original one and attach this one…
A vase I made in blender and cura. I love the surface :-D Category: Decor
a "remix" I did of my structured vase REMEMBER TO LIKE IT if you share, collect or make it :-D Category: Decor
Brackets to mount a switch in a structured wiring in wall enclosure. I needed to use the sides rather than the back mounts to avoid putting a hole in the wall on the other side. Allows for the switch to be removed or detached rather than…
Use Ideal for organizing small items such as office supplies, sewing materials, or bathroom essentials. Its aesthetically pleasing design allows it to be displayed openly within living spaces. Printing Suggestions Print with PLA or PETG…
This is a mounting bracket designed to attach a UniFi PoE++ Adapter (60W) ( U-PoE++ ) or a 10G PoE++ Adapter (60W) ( UACC-PoE++-10G ) to a structured media enclosure. The mounting system is the same as the one that comes with the PoE++…
This template allows for mounting FS.com FHD cassettes to a standard SME (Structured Media Enclosure) system. Printed using standard PLA on Bambu A1.
A vase I made in blender and cura. I love the surface :-D Category: Decor
Updated 2025-10-13: As Meshy updated to M6p, I re-ran some of the models, uploaded. Should I delete the Meshy 5-based versions in that case? Updated 2025-04-04: I was a bit disappointed with the internal voxelization of the models, so I…
Made some mounts for putting network gear in a Leviton structured media center. All mount to cabinet using Leviton's push-lock pins. Made to work with whatever hardware I had on hand, but step files are included so you can modify to fit…
This template allows for mounting FS.com FHD cassettes to a standard SME (Structured Media Enclosure) system. Printed using standard PLA on Bambu A1.
Updated 2025-10-13: As Meshy updated to M6p, I re-ran some of the models, uploaded. Should I delete the Meshy 5-based versions in that case? Updated 2025-04-04: I was a bit disappointed with the internal voxelization of the models, so I…
The Mesh Bowl combines a smooth, rounded interior with a precisely patterned outer surface inspired by a fine mesh structure. This contrast gives the bowl a technical yet elegant character, adding depth without appearing busy. Ideal for…
SMC bracket for mounting D-Link DMS-105 switches into common Leviton, Legrand, and OnQ Structured Media Cabinets. Supported devices include: D-Link DMS-105 5-port 2.5 GbE Ethernet Switch This includes printed mounting tabs for hanging the…
SMC bracket for mounting [Netgear MS305/MS308 Multi-Gigabit 2.5 GbE switches into common Structured Media Cabinets. Supported devices include: Netgear MS305 5-port 2.5 GbE switch Netgear MS308 8-port 2.5 GbE switch This includes printed…
SMC bracket for mounting a Frontier GPON ONT model FOG421 into common Structured Media Cabinets. This includes printed mounting tabs for hanging the device, so no screws are necessary to be added after printing. Use the appropriate…
