48 modeli
EXPERIMENTAL ONLY This is a modification of the 'Montana Mask' found here: https://www.billingsclinic.com/foundation/ Full credit is owed to what was done. An outstanding job was done with the original design. Video with info (in…
For printing with highly-hygroscopic materials such as water-soluble supports or just for regular printing of PETG or ABS exposed to moisture, a drybox is a key way to prevent fast deterioration of materials. For the instructions on the…
Modified spool2kool 's design so it complies with the standard PC4-M10 thread and nut measures therefore it fits in all those passthrough solutions ( SpectreGadget 's one shown in the photos). Print recommendations: Printed the clamp in…
Information V2 Thanks to EvanRLD for the input. I've redesigned the screw subsitute for better overhangs and strength. See V2: https://www.printables.com/model/1405911-substitute-for-m3-x-30-screws-for-play-boxes Information V1 I printed…
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
This is a printable substitute for the elastic of the Prusa Protective Face Shield RC2. Revised to fit the i3 print bed. -This strap may be useful in situations where there is excess printer time available and/or elastic is difficult or…
I printed some boxes (see links) for my games, but didn't have the necessary screw type. So I printed a substitute for the screws. I printed them laying with PETG and pressed them into the box. I tested it with the following designs:…
Front : New version stronger and looking more like the orginal one. But still very short ! Rear : just the same with reinforcement. Print Settings Printer: anet A8 Rafts: No Supports: Yes Resolution: 0.2 Infill: 100 Notes: Printed on my…
Off-the-shelf T-slot nuts are incredibly expensive. So many have set out to replace those with printed parts, always replicating how those nuts work thus putting a lot of pressure on the printed nut. With this thing, all load of the joint…
Knob for M6 socket screw - substitute for butterfly - The 3D printable Knee Arthrometer
NOTE: As March 2023 this has not been printed or tested. A model of the 88-94 c1500 OBS Truck Ash Tray. This model is actually a bit deeper than the OE tray as it was clear that more space was available to extend it into. There are 2…
Cookie cutter made in the image of a substitute shinigami badge from the Bleach series. STL modeled in Blender. The exact design has been modified slightly to make up for detail lost to wall thickness requirements. For commission/business…
Knob for M6 hex screw - substitute for butterfly - The 3D printable Knee Arthrometer The Screw used - M6: https://pt.aliexpress.com/item/4000238240485.html
One-piece dart. It works just as well as a steel-tip. Perfect for training young kids.
The earlier marks of the AVO 8 analogue multimeter use a 15 V B121 / BLR121 battery for their high resistance range. This battery has been obsolete for decades, although commercially available substitutes exist which are based on a stack…
This creates a 3D printable substitute for a common ball bearing. There are many places where ball bearings are used in designs that do not really require an actual steel bearing, such as a rolling spool holder which spins slowly under…
Use a 1/4" dowel for any of your woodworking needs.
I needed this battery adapter so I could charge other 18650s individually, although they were part of a bigger pack I didn't want to disassemble. So I put this fake battery in the charger, and then wire the leads to a specific battery in…
OD 1/4", ID 1/8" Standard aquarium sized tubing, but rigid. For attaching to flex tubing. This is a 7" long segment. It can be cut down or made longer with increasing/decreasing the size of the z acis only.
This is a model that replicates the functions of a Seiko S-651 movement holder. I designed it to hold a Cal. 4336A movement but it will work with several 1970's and 1980's GS Quartz 25mm movements. Print Settings Printer Brand: Creality…
this has a torus diameter of 2mm and a inner diameter of 15mm
This thing is for unlocking and take away, no need to leave in cart (unless this is what you want). Unlocks all types, tested with Biedronka, Lidl, Kaufland, Carrefour, Aldi, Makro, Selgros, Leroy Merlin, Castorama, OBI. No need to kotwić.
Use as a substitute piece to your small woodworking projects,
Very simple (and tight) substitute for the bearings used on "Low Poly Vehicles" from @Turtleman (like this one ). Use the “Wheels With Bearing” version. You need to apply some force as it is a tight fit.
This is a work in progress but I wanted to share it because it seems to work really well. I obviously have an old Samsung Galaxy S5, and I want to reuse it. It has a removable battery, and I found directions on powering it without the…
Build simple projects with these 3D-printed boards instead of expensive lumber!
The original stl (M5 T-slot nut substitute by csweichel) contains 42pcs. If you need less, here is a ready STL with 6 or 12 pieces. Saves you thinkering with the .scad file. Category: 3D Printer Parts
Use these 3D-printed models to change 'woodworking' to '3D Plastic-Working!"
I needed to mount a display for my ebike motor to an understeerer recumbent handlebar. I remembered there existed the Handle Bob, but couldn't remember it's name. Hence, I constructed it and printed it…
Use it to insert two prong plugs into three prong power outlet
Substitute Fidget phone, for those trying to get away from there phones, and those who are in situations where you cannot be on your phone anymore. Will take comments on it and make better versions of it. Weight isnt very heavy, and is…
This is a 3D printed substitute back glass for the iPhone 17 Pro Max, perfect for display phones, teardowns, or showcasing custom colors and finishes without using real glass. It fits the iPhone 17 Pro Max frame precisely and can be used…
Build simple projects with these 3D-printed boards instead of expensive lumber!
cell phone holder for the screen (webcam substitute) The showen phone is a I Phone 16 pro
Tough, common building material.
Parts to help make a caliburn v1 refresh. Front tube cut jig is to help make the cuts on a 1 ½ tube easier than gluing the paper cutouts on. May have to use some blue tape to hold the tube still while cutting. The ½ od ¼ id tube is for…
My old Suunto Cobra 2 console computer for scubadiving, my compass got a crack and now it is useless, so I modeled and printed a substitute cap For those who appreciate and found a time saver, I am happy to have you buy me a beer :)
My landlord replaced an Ikea HOPPVALS cellular blind - the old one delaminated between layers. It hasn't functioned well since day one - I chalked it up to my landlord buying a really terrible product. I went to put some lubricant on it…
Cube for connections, or any other needs.
If you are having issues using the existing O-rings, try these for size. Designed to work with the M10 Wetlink Penetrators sold by Blue Robotics. Pour in your material, let it solidify, and then cut out the newly made O-rings! Designed…
Substitute Soul Reaper (Shinigami) Badge from Bleach Anime
I couldn't find the mirrors online. So I made a 'blank' that fits in the outer rings, and applied peel and stick gold mirror contact paper to them. It is NOT a perfect mirror. But it's better than not finding them :) Print 18 of these. I…
We've all been there. You excitedly unwrap your lightly used Dell DKMMLED185-G01 Rackmount KMM, only to discover that the shipper has lost one of the rail components that was supposed to be included. Well finally you can rest easy and…
2 Color Model for face-down multicolor printing + Model with color change @2.6mm for single-color printers + AMS Model with no top loop. Note for single-color Bambu Printers- You MUST change the COLOR CHANGE to a PAUSE or it will skip it.…
This is a 3D printed substitute back glass for the iPhone 17 Pro Max, perfect for display phones, teardowns, or showcasing custom colors and finishes without using real glass. It fits the iPhone 17 Pro Max frame precisely and can be used…
I couldn't find the mirrors online. So I made a 'blank' that fits in the outer rings, and applied peel and stick gold mirror contact paper to them. It is NOT a perfect mirror. But it's better than not finding them :) Print 18 of these. I…
This is a substitution hub cap for an offroad delta wheels reverse engineer from original. https://shop.delta4x4.com/en/marken/delta4x4/accessoires/8740/radkappe-sins-silber-18x8-20x9 Recommend in ASA material and heated chamber 65°C, I…
![[BRATERSTWO.EU] Shopping cart coin substitute](https://media.printables.com/media/prints/26238377-2842-49cf-85e8-ab6fcdb8db9d/images/9255695_c8816d84-f981-4a63-b337-572dc7da3ebd_82983545-6c30-447a-b0a9-4db18736ec58/pxl_20250318_191142606mp2.jpg)
