106 modeli
I used the same technique for my new Zelda wall art. I explain the process on my previous Zelda Wall Art model . This time the wall art uses four color printing by changing the filament at various levels.
Link, Purah, and two Zeldas. They’re definitely going to need supports, and I also recommend scaling them up nice and big before slicing, assuming you want the fine details. Have fun with these, and if you want to see more, give a like…
If you print at 0.2 layer height, you'll get the same pattern as in the pictures. Below 0.2, the pattern changes, and at
An antique inspired plant pot design with the fill of quilted fabric Print information: Recomended vasemode or semi-vasemode settings (0% infill, 0 top layers, 4 or 5 bottom layers, 2 or 3 outter perimeters - for a stroneger print)…
"Yahaha! You found me!" I love Koroks, especially the ever-tired ones that lop around with a backpack twice their size. They are charming and never fail to make me smile whenever I come across them :) There are two versions of this model:…
This is a digital 3D printable model of Link’s Ultrahand Rings from the new game, Legends of Zelda Tears of the Kingdom. The complete Ultrahand files here! The download contains pieces of the model ready to be 3D printed on a 200 mm print…
The goddess statue from Tears of the Kingdom. (From the Temple of Time.) Prints without supports. If you have any questions, complaints, thoughts or requests, let me know! If you need help with anything I’ll help you as well as I can.…
Modified Rawolr's Master Sword files from thingiverse to turn it into the one from the Tears of the Kingdom trailer, most files are the exact same as the non-metal rod version of the original, only changes are Blade_1, Blade_2 and Blade_3…
Add a filament swap for the details to add contrast.
The entire logo is divided into 7 parts, which can be easily printed with just a change of color during printing, and simply glued together. Use black as the base color (for all models, black will be up to 1 mm in height, except for the…
There’s two versions, one with a chain and one without. Pretty simple. Print it as is but with support on the build plate. You could use this file to make a keychain, earrings, a necklace, or whatever you want. If you make it, please post…
Finally, an updated Moblin with his tough new horn from The Legend of Zelda Tears of the Kingdom. Of all the enemy horn glow ups, moblins fared the best. (Except maybe the pinecone-headed black moblin). Still I think the red moblin horn…
I have since published a better Link model here. Introducing TOTK Link. Needs plenty of supports. I hope to see some makes, particularly if you paint it! I make lots of Zelda models, so if you like this, come check out the other stuff I…
The Light Dragon from Tears of the Kingdom. It’s definitely going to need supports, and I also recommend scaling it up nice and big before slicing, assuming you want the fine details. Have fun with this, and if you want to see more, give…
A model that I designed based off of art from Tears of The Kingdom. This key was designed to be printed with either a multimaterial upgrade, or just any stock printer. The golden inlaid text can be disabled for non-multimaterial printers,…
Work in progress! A full Halloween costume/cosplay for Link in the Soldier Armor from Tears of the Kingdom, including the Ultrahand. I made every piece from scratch in Blender based on in-game models. More pictures and more detailed…
The forest dweller‘s sword! Some parts need supports and some do not, use your sense. I haven’t printed this yet, if you have any issues PLEASE tell me and I will help you. However, I can’t fix everything so please make sure you will be…
Was excited for the upcoming game, so I remixed one of my favorite comfort grips with some of the promotional art!
3D printed Stand does give the Nintendo Switch a unique aura, taking it from gaming device to home decor in a way that really adds a certain element of fantasy to your home. You could place it on your coffee table, TV console, or anywhere…
An intimidating Ganondorf Bust from Tears of the Kingdom. If you print this, please post your make! And if you like this, please give it a like and follow me to see more. (Needs supports)
Original design by RoboMagus. I just made the ears solid with an inset. so you can have different coloured inlays.
Five keychains from The legend of Zelda Breath of the Wild/Tears of the Kingdom: Heart Container Stamina Vessel Daybreaker Shield Rupee Star Fragment You‘ll have to rotate and slice it yourself before printing. If you want me to upload…
This is a 3d interpretation of the logo, perfect for wall art or jewelry. I made this fairly early in the title reveal hype cycle so it does lack some details like some of the runes, and has no main purpose as a model. As it currently is…
A request made by one of my followers. There are 3 different takes on the eye design, because it’s kind of hard to know what direction to go with the eyes. Without color, the chuchu is essentially a blob, so I tried making a version with…
This guitar is modified from the original Prusacaster design with some design tweaks and other minor fixes so that it fits the common guitar parts purchased from Amazon. Guitar parts I used:…
“hey, listen!”
these are 4 keychains each based of a different rune in the legend of Zelda tears of the kingdom (TOTK) including ultra hand, fuse, ascend and recall. These keychains can be used on a bag, set of keys or anything else. (keychain equipment…
If you like Zelda TOTK and 3D printing, here is you printbed scraper. This is a scraper with the TOTK pattern remixed from this varonoi scraper . I've printed it with 15% infill and 0.2 mm layers, and it's pretty strong. TOTK Source pattern
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
Lizalfos come in many colors and love jump-scaring travelers and heroes. Or spear fishing when the former can't be found. All subtypes are available here, including the old fashioned horn from BotW. This miniature is approximately 38 mm…
if you don't know how to use a box....
NOTE: I bought another set for a family member, and found the cards were ever so slightly sized differently. I created a second design from scratch for the 1mm cards, and am much happier with the results. Painting on seams so they aren't…
Hi Greg, here are three options to the masks as George Ragan vocals band members mask changed numerious times over the past several years. See below attached link http://hollywoodundead.wikia.com/wiki/Johnny\_3\_Tears Please show of some…
Scimitar of the Seven : Legend of Zelda : Tears of the Kingdom.
Lizalfos come in all sorts of colors, and now you can paint every color of tongue. This miniature is approximately 38 mm scale, meant for a 40mm base. Lizalfos are known to have weak ankles, so keep that in mind when making your miniature.
A decorative door weight inspired from Zelda Tears of the Kingdom to keep your door open (Just realised the
For anyone who's played the legend of zelda: Tears of the Kingdom, you know the utility of the Brightbloom seed, the light in the dark. When I looked around to print one, I couldn't believe it! Nobody had made a brightbloom seed lamp ??…
I made one of the tears that can be found on the game Zelda Tears of the Kingdom. Hope you enjoy it! Category: Art
These are the four letter tiles (two lines and two curves) compatible with Learning without Tears or Handwriting without Tears curriculum. They are modeled with a 5 mm height and can fit on a standard Ender 3v2 bed if printed diagonally…
Blupee from the Legend of Zelda: Tears of a Kingdom
it is a nintendo switch dock
A moblin, approximately 38mm scale, tossing what appears to be a bad idea straight towards you. Scaled for a 50 mm base. Five versions of the model are available, there are stl files for each of the moblin types and a fifth .3mf file that…
Lizalfos come in all sorts of colors, but the red ones are unique in their ability to breath fire. They also have a lava horn useful for burning things. This miniature is approximately 38 mm scale, shown on a 40mm base. Lizalfos are known…
From the Legend of Zelda game fan machine model, transformed into a handheld fan, so that fans and friends can experience the feeling of Zelda。 Model demonstration video from my video channel. YouTube:…
I used a standard E27 socket for this lamp (see picture). 12W LED Corn Bulb 1450 LM, that's enough for me, but it's not really bright.
Link - The Legend of Zelda: Tears of the Kingdom Double Bit Fill out my Fan Request Form here to request new character models! https://forms.gle/ALgmpRz56WqowtMe8 https://www.instagram.com/blenkhorn3d https://www.patreon.com/blenkhorn
This is a lamp bearing the Zonai symbol on the front and “It's dangerous to go alone! Take this.” in Zonai script all around the perimeter. This model needs to be printed on a multimaterial printer with translucent filament for the…
This is a coaster inspired by the Korok Space Program emblem made by VulshokBersrker on reddit. I slightly modified it to work better as a coaster. This can be printed if you have a multimaterial printer with at least five colors. These…
In the kingdom of Hyrule, a hero named Link Was well known for his swordsmanship, fast and quick But as the springtime arrived, he fell victim to a trick For the allergens in the air he could not predict His eyes began to itch, his nose…
Bomb barrels, based on the design from the wild games. Approximately 38mm scale. Two versions are provided: one with a flat bottom and one with detailing on both sides. The flat one is very FDM friendly!
Based off the geoglyph map in the forgotten temple that you find as part of the Dragon's Tears quest line in Tears of the Kingdom. Obviously minus the geoglyph markers. There is a lot of smaller detail especially towards the top of the…
Remix of Bourbonic Tears Pot and Planter: non vase mode and has drainage holes.
Simple wall decoration of the Zelda: Tears of the Kingdom Master Sword design. Category: 2D Art
Lizalfos come in many colors, and some have special ice breath abilities. Well, just the light blue ones. Sorry regular blue lizalfos. This miniature is approximately 38 mm scale, shown on a 40mm base. Lizalfos are known to have weak…
This is my attempt at modelling the Shrines of light in The Legend of Zelda: Tears of the Kingdom. The floaty bits are held up by 5mm acrylic rods (13mm for the pillars, 6mm for the roof pieces), but feel free to experiment with different…
Features: Print individual pieces with color of choice. No multicolor print unit needed. Prints flat / snaps together for 3D surface on both sides (print shell x 2 & core x 2 for each track). Part Options: Snap Track - With or without tab…
This is an other design of mine (for an other friend). As most of my works this is solely created in Blender 3D While mainly designed with FDM-technology in mind, this sculpt is interesting in many different cases and in my opinion a…
So in a surprise to absolutely no-one who knows me, I love Hollow Knight. For those unfamiliar, it is a beautiful platformer by Team Cherry - with incredible art, beautiful music, and a brutal Souls-like meets Metroidvania challenge. I…
Lizalfos come in many colors, and you'll be shocked that they come in yellow too. What is fancier than a lightning shaped horn? This miniature is approximately 38 mm scale, designed for a 50mm base.
A moblin, approximately 38mm scale, apparently with something to say. Scaled for a 50 mm base. Four STLs are available, one for each horn type. This model is slightly different than the amiibo version. A little better posing and some…
A cool little box I designed and printed up to display my pins from the collector's edition of Tears Of The Kingdom. It does have to option of a snap-in back piece. Really, any pins could go in here, but it's made to fit the these. Plus…
A moblin, approximately 38mm scale, with a two handed weapon. Scaled for a 50 mm base. The royal claymore is remixed from OutSM's amazing model. Four STLs are available, one for each horn type, plus a .3mf file for digital kitbashing.…
My attempt to create the iconic ornament, I took some freedoms with the details and suffered some small inaccuracies to exist for printability's sake and real life likeness. The scale should be fitting for cosplay, if on the small side…
The scale should be fitting for cosplay, if on the small side for anyone with a bigger build than... our hero himself. In the more likely case of average male height, I'd recommend to scale up roughly 25%
There is a lot of little details in these so be sure to use high quality settings when you slice. Other than that, it should be straight forward. Happy Printing :)
Legend of Zelda has always been a favorite IP of mine even since the sprout days. In honor of the newest game out #tearsofthekingdom I've taken it upon myself to recreate a 3d model from the Korok backpack challenges found scattered…
Catears go brrrr. I found these cool ledstrips [0] that have 300 WS2812 leds per meter and are only 4mm width This is what happened next. 60 WS2812 leds 1 Attiny85 Hotglue [0] https://de.aliexpress.com/item/4000765540185.html
A cool faceplate dock for your Switch! Check out all my premium files on Patreon if you are interested in more.
This is a Zonai ouroboros from Totk. After all the times Link has activated it in the game, why not decorate your game room with this classic piece? *assembly requires glue Enjoy!
Design for the contest tissue box cover for the square boxes. No supports needed. Print with the any layer size really. I printed it with .4mm layers using a 6mm nozzle, and 4 bottom which it the top. Print top down on the bed. Go slow on…
I wanted to make the case more interesting and thought it would be cool if it matched my Tears Of The Kingdom Edition Switch! I added the Switch logo, the TOTK logo, the TOTK pattern, and updated the clip dimensions to hold the cartridges…
Bought a new set of Ambio cards to go with Tears of the Kingdom. This set has 38 cards (the old set had 24). The case that came with the new cards left a lot to be desired. It was approximately the size of a credit card and a half inch…
If you've ever wanted these icons in your art projects, here you go :)
Print in 0.20mm and glue the handle on the back of the stamp part ! Enjoy your cookies !
MUST PRINT THIS IN TPU !!!! …This is just a prototype, I have modeled more to go up your arm more and will upload those when I test print it.
I'm planning on building this and upload a guide thing to youtube, so if I do I'll update this with a link. to print this yourself, you need to print out anything that says half in the name twice, print the pin 3 times (you wont need any…
I made these a while ago as a test piece, had some fun making them. You can use these to cast crayons, mold clay or playdoh, or other materials. Print in TPU for a reusable, flexible mold.
Rearranged it to be printed easier, and I scaled it down a bit so it fits a 220x220 bed.
MAKE THIS IN TPU TO WORK…….This is the updated version from the Tears Of The Kingdom hand clips for cosplay. This is the right size that it should fit on a normal ender 3 printer.
My attempt to create the iconic ornament, I took some freedoms with the details and suffered some small inaccuracies to exist for printability and durabilitys sake (like connecting everything together and forgoing the magically floating…
MAKE THIS IN TPU TO WORK……these are updated pieces for the cosplay tears of the kingdom.
Last pieces for the cosplay for tears of the kingdom
This lid is intended to fit the NokBox 8x8 TTRPG Dice Box found here: LINK I recommend printing it graphic side down on a textured build-plate using the “Only 1 wall on first layer” setting. The graphics parts should show up in the…
Designed specifically for "Hannah's Tears" chaplets. Find out more about this devotion and prayer at: https://hannahstears.org The 27 + 3 'holes' are sized - vertically and horizontally - for beads ranging from 6mm to 10mm (though larger…
See also: https://www.printables.com/model/884238 Preferably to be printed in Tpe, tpu or similar, either directly into the cloth using the loose template, or ironed/glued on using the interconnected version. If you only have access to…
In scale with https://www.printables.com/model/884238
Refresh Tears Bottle (0.17 oz) Holder
A slightly modified version of the 4010 fan adapter for the Ender 3 V3 SE
Stamp that says “For Your Tears” can be used for little notes or give-away baggies for memorial funeral services. Make sure to flip it before slicing and printing.
Keep this 3D printed roll of Bambu branded toilet paper near your computer or phone, so when your feelings get hurt when anyone talks down on the holy grail of printers you have something to dry your tears. Yes, I did print this on a P1S…
Zelda Tears of the Kingdom abilities coaster. Enjoy!
I liked the original Giant Brightbloom lamp a lot, but I felt there were some tweaks to be made in the installation of the light source. This version is meant to use a 4" round led light base and is designed with a slot for the cord. I…
NOT FINISHED JET This is my Project of making caters who you can eaysly mount in any kind of headphones. Current version uses a vape Battery with 360mah witch lasts ca 2-3h. I plan to build a v2 with a 500mah Battery and proper power…
Earrings for the non-Valentine types. Sometimes you just want to see some boys cry. I encourage to experiment with ironing and color changes. For the example in the photo I have used Auropol Red and Buddy3D Lila PLA for the heart and…
Cut the cord! Watch TV with no subscription! Using 3D printing technology, enhance your viewing with an antenna that is as whimsical as it is functional. rabbitEARS are nimble enough to catch all major channels broadcast in your region…
Approximation of the honor medals the game gives you by killing all bosses, so now you can use them as props or whatever. Print Settings Rafts: No Supports: No Infill: 10% Category: Games
A 6-color, multi-material relief portrait of a woman in tears, with the flag of Armenia painted across one cheek and the flag of Artsakh (Nagorno-Karabakh) across the other. Made in memory of the people of Artsakh. CREDITS – PLEASE READ…
NOT FINISHED JET This is my Project of making caters who you can eaysly mount in any kind of headphones. Current version uses a vape Battery with 360mah witch lasts ca 2-3h. I plan to build a v2 with a 500mah Battery and proper power…
Bomb barrels, based on the design from the wild games. Approximately 38mm scale. Two versions are provided: one with a flat bottom and one with detailing on both sides. The flat one is very FDM friendly!
![Tears of The Kingdom Key [Rearranged]](https://media.printables.com/media/prints/598683/images/4766494_7efa3bc0-9d71-4cb1-9492-d1f779033e42_60f9a2ac-452b-441d-9cd6-015012779158/screenshot-2023-09-30-212905.png)
![[Stretched] Charged Armor Chestpiece Ornaments Tears of the Kingdom](https://media.printables.com/media/prints/891598/images/6825778_74d85558-63aa-41c1-a8c3-0c409f1fdd1e_f72c1502-3bfd-428b-8fef-1c3d07051b60/screenshot_1.png)
