1591 modeli
I love the look of these shelves, check how Tom created them: However, I wasn't a fan of the uneven and paper-thin back (even though I believe mechanically it doesn't matter). So I've made it completely flat and a bit thicker. I also went…
Wydruk około 7,17 €–8,76 € nettoWstępna wycena jednego wariantu
Description This is a fast and easy to print model to calibrate your new filament. It can be used to find the right settings for the extrusion factor to get the right wall thickness. It is designed with a 0.86 mm wall thickness to meet…
Wydruk około 0,14 €–0,17 € nettoWstępna wycena jednego wariantu
The bottom in the original pot can be a little flimsy, being only 1mm thick. It gets even thinner when you scale the model down, so in this version I made it roughly two times thicker. Otherwise it is identical to the original.
Wydruk około 4,67 €–5,71 € nettoWstępna wycena jednego wariantu
This is my design of a box with a lid with intentionally thick walls to be printed with transparent or translucent filament. The walls are 4mm thick, which makes the box very robust, but more importantly, it will look great if you print…
Wydruk około 3,43 €–4,19 € nettoWstępna wycena jednego wariantu
Star Wars Chopper: Thick Mini Version. Added an even thicker version (2/11/2025) Aptly nammed “Chopperthick.***” Small parts should be more stable. Thanks Ben for the feedback!
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
This is a remix of John's card to put under the kickstand when parking on soft ground. As per original description: “If you lose or forget it, you can just print another one.” As the original was too thin, I created a thicker one. While I…
Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu
Wargame Walls Thick Section 18 Because the fight goes on in the deep, dark future. The megalopolises are at war, and their industrial needs cannot wait! Do your part, citizen! Print these out today! Show your worth! Get back in the fight!…
Wydruk około 3,90 €–4,76 € nettoWstępna wycena jednego wariantu
I wanted a thicker feeler gauge that I could fit in my pants pocket without fear of bending or damaging. Here is the fillet gauge! I like the way it feels. Printed on an Ender-3 V2 at 0.2 layer height in PLA
Wydruk około 0,97 €–1,19 € nettoWstępna wycena jednego wariantu
Hello friends from all over the world :) This is a simple smartphone stand for cases, when you don't want to keep it in your hands while sitting at the table and would like to have a more ergonomic angle of view. For example when you're…
Wydruk około 0,29 €–0,35 € nettoWstępna wycena jednego wariantu
Clamp for secure and damage-free clamping of cylinder pins and wooden dowels. Suitable for shortening or reworking cylinder pins or wooden dowels with a file or saw. Clamping diameter 12, 10, 8, 6, 5 and 4 millimetres. Update I have added…
Wydruk około 1,20 €–1,47 € nettoWstępna wycena dla PETGMateriał u źródła: PET
this is a laptop stand for most thicker laptops, I mainly designed it for a Razer 15.6 in gaming laptop. it should work for most laptops thinner than 12.5 mm in thickness. PLA 0.4 MM Nozzle
Wydruk około 2,85 €–3,48 € nettoWstępna wycena jednego wariantu
Use at your own risk. This is a demonstration of makeability. I do not recomment using the product for nutrition. Be aware what you are doing. If you like to use the product for drinking, use a filament which is allowed for alimentation…
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted a handle with a similar form factor as a condenser microphone, so I could use it with a traditional microphone arm, or to handle it myself while talking to the camera. So I went and remixed one of the models by @365Prints…
Wydruk około 2,03 €–2,49 € nettoWstępna wycena jednego wariantu
So far happy with the looks and takes about 55mins on the mk4 @ .2mm Speed setting. Not sure how the color will hold up but thinking that I can paint them if the sun bleaches them too much.
Wydruk około 1,42 €–1,73 € nettoWstępna wycena jednego wariantu
Print-in-place laptop stand by @Cherry_Labs. I modified hook height for my 16” Macbook Pro (2023) or laptops up to 14.29mm thick, including the rubber feet. Cherry Labs recommends printing with a 0.4mm nozzle. See his model page for…
Wydruk około 4,56 €–5,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Compared to the original I swapped the place of the sanctuaries and the citadels. Redesigned the clans-trays into one combined with the old buildings-tray and pretender-token-tray, to make room for another card tray that accommodates even…
Wydruk około 5,97 €–7,30 € nettoWstępna wycena jednego wariantu
I printed mine laying down but I've included the gcode for both laying down and upright versions.
Wydruk około 6,09 €–7,44 € nettoWstępna wycena jednego wariantu
Original for me was a bit to fragile so i made the walls thicker to increase strength
Wydruk około 9,02 €–11,02 € nettoWstępna wycena jednego wariantu
A stand made for ~20 cm height FumoFumo plushies by Gift. This stand was made with sizing referencing the standard FumoFumo Koishi Komeiji plush. This stand fits loose, and is only meant to keep the plush upright on a stable flat surface.…
Wydruk około 1,22 €–1,49 € nettoWstępna wycena jednego wariantu
## About this model This is a 3D-printable redesign of an original honey gate valve, the kind used by beekeepers to tap honey from buckets and containers. I fully re-modeled the original part and reworked several areas specifically so…
Wydruk około 2,14 €–2,62 € nettoWstępna wycena jednego wariantu
Mit diesem Adapter kann ein Saugschauch mit D50 Muffe (z.B. Festool) mit dem Absaugstutzen des Makita Dickenhobels verbunden werden. With this adapter, a suction hose D50 sleeve (e.g. Festool) can be connected to the suction nozzle of the…
Wydruk około 2,95 €–3,60 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Print tips: Best to be printed with full perimeters (7 perimeters with 0.4 nozzle diameter) to be more stable.
Wydruk około 14,80 €–18,09 € nettoWstępna wycena jednego wariantu
These side brackets are for my Venezuelan red tail boa to have something to climb on in her tote! I use bamboo for Snips to climb on so far so good. .30-layer height and 150% print speed. I used a solder iron to burn holes through the tub…
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
It is a supported edition because my PetG is not good in bridge making. The support is very easy to remove, You not needed to have any tool for it.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made with meshlab and made to be printed without supports or any special settings, as a stress test for TPU printing.
Original version was to big for my phone. Additionally I'm using case with “ring” so it was to thick so I created two new versions for anyone with small phone, and phone with thick case. Xbox Series One Controller Phone Mount Narrow - for…
I made this bundle of brackets so you can print your own when needed. Both L-shaped brackets and corner braces, inside and outside versions. All brackets are 3mm thick, with a 6mm thick version for extra strength when that is needed. The…
Modified blade to be thicker With the original blade model, the blade pieces kept breaking whenever I swish-flicked it open because of how thin the walls were, both in PLA and PETG. So I increased the width of the walls of the blade…
This is a remixed/edited phone stand that I configured to use at my desk for my iPhone XR that has a thick case on it - the original just fit the bare phone without a case. Widened the body a little too for support. Printed on my prusa…
I have received a lot of backlash on Reddit, calling this "gooning content", so before anyone calls this “gooning content,” please consider this: X: We must respect women and their bodies! X: You drew a woman with large breasts, you don't…
You might also like: https://www.printables.com/model/280185-design-reference-radius-ruler-innerouter-1-to-12mm In the computer everything looks huge, but in reality 1mm could be enough or may be too flimsy depending on what you’re trying…
This print is a conversion from now mostly useless optical drive bays (discs/DVD/CD bays), AKA 5.25" drives. The adapter will fit up to 4 2.5" drives instead and can fit all standard formats (so each of the 7mm, 9.5mm, and 15mm thick…
This is a calibration tile for finding the "maximum thickness" to enter into lithophane generators like lithophanemaker.com or 3dp.rocks. Values of 3-4mm usually work well, but since every filament absorbs light differently, you might…
Micro SD Card Wallet Holds 16 Micro SDs and 1 standard SD card. The tray contains the clipped in cards covered by a sliding lid. Dimensions: 58 x 99 x 4 mm Printing recommandations PLA 0.3 mm layer height 4 perimeters, arachne mode is not…
Keep Your Filament Tidy – Now Stronger Than Ever (V2) An improved, compact, and user-friendly clip designed to secure filament ends on spools—preventing unwinding and tangling. Now in Version 2 , featuring thicker walls for enhanced…
I removed the case and verified that it is compatible with the Rakuten Hand 5G and Galaxy S23 Ultra. I tried printing with the following settings. ------------------------------ Slicer: Creality Print Nozzle: 0.4mm Layer Height: 0.15mm…
just another fan grill design easy to print, no print support. the large air gap between the fan blades and the grill allows little to no added turbulence noise from it. 10mm thick to match a 4020 fan thickness when used with a 4010 fan,…
The original model couldn't be used on my desk because it is much thicker then 35mm, so I remixed it. You'll need screw.stl, plate.stl and nut.stl files from the original model (…
This model is compatible with the lego system.
I like the design of the original caliper mount, but I managed to snap a supporting vane off mine while removing it from the print bed. I remixed that model to thicken those vanes slightly, and now I have no troubles printing robust…
With the model, you can visualize how the addition of one layer looks and feels. The model can also be used as a thickness measure gauge.
This model is compatible with the lego system.
This is remix of https://www.thingiverse.com/thing:4596529 by thomasotwo@thingiverse I wanted those mountains higher and thicker. So I modified it in Blender to make it thicker and then I scale its height to 133% (10mm). It's still fits…
This model is compatible with the lego system.
First layer at 0.20 Print rest at 0.15
This model is compatible with the lego system.
Easy, quick printed way to help your Bowden couplers stay tight and strong. Print without supports, as oriented, using your slicer's finest “super quality” setting. Three (3) varied thicknesses of clips are provided: 1.00mm, 1.25mm, and…
I've made 4 versions of the camera body cap depending on what you'd like. one that keeps the locking pin in place and one that doesn't, and then each of those two options with or without the Pentax logo on it. I've printed the logo +…
needed a tablecloth clamp for a 45mm thick table, remixed the great design by bramsky, and it works perfectly Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.20 Infill: 50 Filament: Prusament PETG…
Someone in the comments mentioned that original canopy is too thin for TPU so I added 0.5mm thickness for it
Modeled from scratch to optimise for strength, rigidity and a quality feel, not for “fast print”. Slightly deeper than standard bins. No magnet holes. Walls are 2.6mm thick.
Designed a corner expansion for 4mm corrugated carton boxes. Just adjust the heigh in prusa slicer on for your box height. I suggest to put tape around it to increase toughness so it won't fall off easily. Everything shown in photo. Mine…
Aluminum Extrusion 2020 Endcap
This is a quick remix of the Prusa provided spool holder (B4). Added an extra 10mm thickness to the overall width of the original design to add more rigidity. The clip on portion also benefits from an additional 10 mm to snap onto the…
This model is compatible with the lego system.
The standard chain starts to sag and beat against the case over time, so I decided to print myself a new one, however, I prefer the simplified drag chain termination and I would like to use the spool holder from @design8studio in the…
This model is compatible with the lego system.
Cable wall clip for a 2.5mm 3-core cable that has an overall cable diameter of almost 11mm. Hole is for a 6mm wall screw with countersunk screw head. The overall thickness is 5mm and printed in solid infill for more strength. I used PETG…
This model is compatible with the lego system.
I wanted a new case for my iPhone 13. Having looked at the available options, I was not happy, so I looked for one that should be easy to modify to fit my needs. I found the “IPhone 13 tpu case” by Majszczur, and remixed it to fit my…
This model is compatible with the lego system.
i put both halves of the coin together, added a middle layer, reduced the depth of the minting and added a stand. Print upright with copperfill, age it with vinegar or ammonia. have fun! ++ UPDATE ++ Added one with no stand for custom…
Having long hair has its challenges, it often does not behave and makes frequent escape bids from hair elastics. I wanted to find an easy hair clip that can control thicker hair without applying any tension which might cause headaches…
This model is compatible with the lego system.
This is an iPad Pro 12.9" stand for thicker cases (e.g. EVA-Foam) Das ist ein iPad Pro 12.9" Ständer für dickere Hüllen (z.B. Schaumstoff) Print instructions Unassociated tags: hülle, ständer Category: Tablet Print Settings Printer Brand:…
I took Matt Germans beautiful Lord's Prayer art (https://www.printables.com/model/711044-ourfather-cross), added Jerry Lee's extended tabs (https://www.printables.com/model/722193-lords-prayer-cross-hanging-wall-art) and shortened them…
A wall mount for rectangular bathroom scales. Attachable with adhesive strips. Multiple thicknesses available.
This is a remix of the model by Derailed3D. Schnipp already did a remix with a thicker tail as well, but I changed the shape of the final bump a little so you can decide between the two which you like best. Please disregard the different…
(Thicker) Mini Shoe Horn with HONEYCOMB Cut-Out | REMIX Made a HONEYCOMB Cut-Out remix from the great original model and added a hole/honeycomb version for the thicker version of the shoe horn as well, the original hole was a bit too…
This is a remix of the excellent compliant blaster found here: https://www.printables.com/model/540528-one-piece-compliant-blaster I decided to print a double thick version of the half size blaster. Simply scale the model 200% on the…
This model is compatible with the lego system.
Simple cabinet door and drawer handles with 2-sided tape mount for 18mm thick panels (3 size variations). Made for temporary use until I decide what will be the permanent “style” - although they are tougher than I initially thought. Only…
I had a few issues with the existing version of the stand for @termiman's and @PjotrStrog's soldering iron cases. The stand was a loose fit in the case when stored, causing it to fall out, and it was slightly fiddly to remove. The stand…
This model is compatible with the lego system.
Original Qidi filament adapter given to me from Qidi. I have posted the original and a simplified version I have created with a much lower file size. Both files create the same adapter. These work great for leveling the bed, so keep an…
Yet another bag clip. Here is a useful bag clip that closes on a thicker folded plastic bag or similar, typically at least 1mm thick. This design is inspired (well done to phil38) by another design seen on Thingiverse,…
This model is compatible with the lego system.
Originally uploaded by nat_blundell
This model is compatible with the lego system.
This model is compatible with the lego system.
Slight modification to make the walls thicker to make it more durable when printed using ABS. Scale to your needs.
Version with a thicker border so it isn't so flimsy, modified connection points for easier parts removal, rounded corners of catapult arm for comfort, reinforced pivot pins, condensed assembly guide to two pages per sheet.
Wings are now more than one layer thick, more durable. BEND THE TAIL TIPS UP AND ADJUST THE ELEVATORS.
This model is compatible with the lego system.
Hi i remade this Headset holder for the IKEA Alex Drawer mine was 16mm thick so the original one didnt fit. hope that helps some of you printed in eSun PLA+ with the generic PLA set on the Bambu Lab X1C
This is basically a port of the Thunder Thighs kit for the new Carbon 13 figure, with some cyberpunk styling added to my personal build As per requests on the older kits, this one includes pretty much all the parts, so you don't have to…
For those who want to cover a frayed, drilled hole in their desk. Diameters are according to holes drilled by means of saw rims with standard sizes of Ø 25 mm, 32 mm, 38 mm, 44 mm, 51 mm, 57 mm, 63 mm. The desk grommet/hole cover provides…
It's a simple remix, the original didn't really work all that well with a 0.4mm Nozzle so I made this that is sturdy when printed with a 0.4mm nozzle.
This remix adds a bit more material around the bolts for the hinges and latches so that they are less prone to breaking when adding the M3 bolts. I used the original 4mm latch. I printed the case in PLA and the hinges in PETG. You will…
Headphone holder like the source model, but with a large enough mount to fit on thicker desks. Made to fit on a butcher-block counter slab standing desk conversion.
Summary This design, developed by JingYi Yang and Zhong You at Oxford University, showcases a very useful technique for adding thickness to certain origami patterns. By alternating hinges on the tops and bottoms of different sections, and…
In Case you need the slim version: https://www.printables.com/de/model/554008-ipod-classic-5g-30gb-case-with-hexagon-back-and-mo Deutsch: Nach einigen Anfragen zu einer Version meines iPod Cases für die dicke Varianten des iPods (160GB),…
The MK4 "x-carriage-back" was able to hit the frame hook of this part so I adjusted its width. After publishing this I found that a cable tie on the x-carriage cable outlet can interfere with this by about 1mm so I added…
This tool is designed to provide a quick and intuitive way to measure the thickness of a vessel's base during throwing, allowing you to accurately estimate the amount of clay remaining for final shaping and refinement. How to Use: Place…
I seem to have not very good orange PETG filament and when I tried to attach the legs to the body, the thin legs always used to break. I printed many legs on Ender3V2 and broke them all. Finally I've contacted reddadsteve and he suggested…
Hi I made this case for my Zenfone 9 today . I hope you like it . I added two versions thin one with camera bump and one with thick back (I Printed the back with blocks of no top and bottom layers to get the nice infill pattern) Print in…
This model is compatible with the lego system.
This version is sturdier than the original thanks to increased thickness.
![Rode Wireless Go Handle - Shorter and Thicker (Condenser Mic Form Factor) [remix]](https://media.printables.com/media/prints/708849/images/5560717_ae14a831-061b-4090-9d33-a60d35514964_04cd4bb4-c195-4a5b-b810-5629f3b2daa1/perspective.png)
