854 modeli
PLEASE UPDATE YOUR FILES to ensure the best fit. ( updated 1/10/23 ) Stronger Handle and simpler labeling for less mistakes. 49 hours too much? Try 60% version→…
Shout out to 80sNerdBomb for the model. The Vertical version is much better . Thread support works well and comes out easily. Images in makes. I printed it in Prusament My Silverness PLA and Mystic Brown PLA.
This is a mini cute version of Thor Hammer (Mjolnir). It fit in 4.5 x 3 x 9 cm. No support needed. If the scale fit your needs, use the gcode file, I selected lightning pattern to get a faster print. It can be upscaled easily to life size…
I made Thor's Hammer for Lucky 13. I included the STL file, a 3mf file, and a gcode files for the MK3 and Mini. Share a picture if you print one!
Piggy bank inspired by Thor's hammer. To save and be able to buy 3d machines :). It is printed in pieces, only in the bodysuit supports are recommended since in the others it is not necessary. To enjoy
Let me introduce you to my adaptation of Thorin´s ring from movie Hobbit. The ring is designed in Fusion360. The inner diameter is 20mm so anyone can scale it in slicer to own size of finger. I tried to apply some blue color to the place…
USA (Ultimate Sportscard Authority) graded TCG sports cards wall holder and display frame New version of TCG display is available collection https://www.printables.com/model/1490952-multiple-tcg-sports-cards-wall-holder-and-display
LCD Knob depicting Marvel Thor Hammer (Mjolnir) for the Prusa MK3S and Mini. It is printed in PETG in 2 colors with one extruder. the .3mf file is setup for the color change and ironing to make the top smooth. Note: With the research I…
Thin version is thinner by 1mm. Gluing The snap fit is good enough to hold both part together. But if you slightly bend the tool, they separate. I used acetone for gluing for PLA or ABS prints. Insert lockpick into core part Apply acetone…
This is a set of decorations for your Master Cooler QUBE 500 computer case. You can have RGB LED lights bouncing with the music, or single color LED lights glowing in the lightning bolt. These items will give your PC a cool and…
Hawthorn Australian rules Football club logo in 3D. With built in colour/layer changes for multicolour print on a single filament printer. My models are free but if you'd like to buy me a coffee that would be greatly appreciated. Thanks.
Fits for following product: PIR Motion Sensor 6m 800W IP65 THORGEON https://thorgeon.com/02025/?ref=sensors
This 3D model is a gift for everyone. In return, I ask only that you mention me. However, some users on this site appropriate other people's 3D models, pass them off as their own, and restrict the license. Please report such people to the…
It is now possible to print the handle without support material. The handle also consists of only 2 parts and is put together after printing. The main part of the handle has a height of 290mm together with the bottom part resulting in a…
We have created a new base for the stem, with nice leaves. The stem is simply printed upright and can be printed perfectly, even the small one (like shown on the photo). Printing should be done slowly (about 45 mm/sec. *) and, if…
Whoever holds this Hammer, be they worthy, shall posses the powers of Thor! This is an ambitious build. I set out to model Mjolnir in my own way with an ode to some of the things I really like about the MCU version. My main caveat was…
Mjölnir - Thor Hammer keychain
In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable.
BETA TESTING Complete 12/4/2025 This grip feels fantastic! The AYN Thor Grip is engineered to transform the Thor’s handheld form into a true console-grade feel. The sculpted design fills the empty space between the screen and the body…
Thorn is a hand-cannon from Bungie's latest game: Destiny. It is said to be the hardest weapon to grind for in the game. I designed the gun in 10 hours using solidworks. The printing took 24 hours and all the parts stick together with a…
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The spikes can be added during tying, or ahead of time so the positioning is somewhat random. They can also be used in limb joints or…
I cant take credit for this, all I did was scale Decibel's awesome stem model on the x and y to fit the 5cm version of Lytta's beautiful spiral vase rose. I left the Z at Decibel's original hight to have a long stem. All credit really…
This is a digital 3D printable model of Zeus’s Lightning Bolt from the Marvel Cinematic Universe. The download contains pieces of the model ready to be 3D printed on a 200 mm print bed and files that are not cut into smaller pieces. All…
Remix of thing:3030916 “Thors hammer 2.0! Mjolnir” and the stand is from thing:2222197. Thanks to all the designers to make these awesome files! I printed this with very dense infill. 40-50% on all pieces. The handle was a little too long…
Trigger buttons for the Ayn Thor, printed on 0.08mm Extra Fine preset with tree supports. Fixed the friction between triggers and shoulders. Enjoy!
A 3D-printable replica prop of Thor's Stormbreaker.
This is a multi-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360. This is the parts list: Hammer: 1x HammerBot.stl 1x HammerTop.stl 2x HammerEnd.stl 1x HammerCap.stl 4x Core…
My wife love book series Court of Thorns And Roses and when i can't find any nice bookmark so i created one. i create 2 versions v18 - velaris in circle and bottom of bookmark with text “to the stars who listen. And dreams that are…
A life-sized 3D printable version of Thor's trusty hammer, Mjölnir!
In the print settings tab select “ Spiral Vase mode”. A little over-extrusion width (e.g. 0.6 mm for 0.4 nozzle) does not hurt, then it is more stable. The files were provided by Lucretia @bergfex55_505553 in order to be able to present…
A fun, new dummy 13 accessory
Modeled these up, they take 3/8 rods down the center(I used a threaded rod left over from my printer build). Be sure to post a make! Category: Props
This print is relatively easy; the only part that can be tricky is the receiver, which I recommend support. Besides that, it is a very easy print and can be very fun to assemble and finish. DISCLAIMER! This thorn doesn't have the…
Mjölnir God of War - Thor's Hammer from the God of War Game Inland Filament Used: Hammer Head: Gray PLA Pommel: Wood PLA Snap Connectors: Black PLA Printer Settings: Nozzle Temp: 215 Bed Temp: 60 Layer Height: 0.2mm Infill: 15% - Gyroid…
This is a single-part version of Mjolnir based on the design used in the Marvel Cinematic Universe. It was designed in Fusion 360. Print instructions I printed with the handle up and supports on. I would recommend not to "detect bridging…
Introducing the " Thor Stop Hammer " – a door stop that ingeniously combines functionality with a playful nod to the mighty Mjölnir, Thor's iconic hammer. This door stop isn't just a practical household accessory; it's a conversation…
Improve the ergonomics of your AYN Thor with this ergonomic grip! The shape is derived from the Steam Controller 2026. Important! Align the flat part of the grip, where the shoulder buttons are, to the build plate. This will ensure nice…
thor hammer bookend made with tinkercad hope you enjoy it
3 part model of Mjolnir as depicted in the MCU Thor/Avengers films
An old Pepakura file from Pepakura.com that I'd been meaning to upload for some time. Recently inspired by Killonious's very well rendered model found over here ; ) http://www.thingiverse.com/thing:2290282 Will need splitting up and as…
UPDATE: I've seen your comments about issues with printing the 2 halves. I've designed new versions with better structure connecting the parts. I hope these redesigns work better! Replica of Mjolnir as appearing in Thor Love and Thunder.…
Klicenka Thor kladiva - original model zmensit ve sliceru na 15% tak aby vysla klicenka. viz Foto Tisknuto z PetG - 230°/80°
Hi Ecogeeco, I had a small window to slap this together. Hope it works for you and as always check the size suits your needs, Cheers Jace
Destiny - Thorn Pistol V4.1 (Full size) For better pics of this model, see other users makes below Latest update: More updates to shells 3 & 4 to V4.1 Seperated all Thorns and Pivots etc into individual files Included new blender file of…
In the heart of a lush garden, where the symphony of nature played its endless melody, there bloomed a solitary rose. Its petals, a crimson as deep as the blush of first love, held the morning dew like precious jewels. But beneath the…
This is my version of Thorn from Destiny 2. Will update with the final prints when completed. Included are two versions of the grip with and without the wrapping. Print Settings Printer: FLSUN Super Racer Rafts: Doesn't Matter Supports:…
I thinned out the connection points on the receiver to allow for a smooth connection with little filing needed. GCode files are for a 88% model size to make it fit on my Ender 3
Thor Inspired Avengers Helmet Enjoy Category: 3D Printing
EDIT 05/08/2026 Added 2 models for tolerance testing to reduce faulty prints and to lower print time overall, they are 1:1 with the grip so just scale inside the slicer to get the fit you like. Remember, V2 model requires the felt pieces…
Thors Hammer as a fun fidget spinner. .stl & .3mf files available. The fidgets in the photos were printed at a layer height of 0.16mm. Post printing: clean off any seams from the running surfaces for a smooth spinning action. Check out my…
The model was sliced with meshmixer and i added pegs to help you to glue the parts together, files are unsupported, i trust you, you can do it! Model was remixed as part of a challenge in the mz4250 patreon, hope you guys like it. the…
Thorns overlay tile replacement for Gloomhaven board game. This printed better than I thought it would but beware of stringing. Print instructions Supports: No Resolution: High
A simple Plant pot inspired by the looks and feel of rose thorns! It is quite sharp! Used Filament: This model was printed using Gunmetal Matt PLA from FormFutura The FormFutura team was so nice to send us some samples and we had the…
Mjolnir, Thor Hammer / Mjolnir, El martillo de Thor
.3mf and g-code both include color change.
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The hooked shape lets you easily get them under tight wraps and into position painlessly (well, not totally painlessly 😅). For safety…
Thor's hammer from the movie in 2 part with a base.
__________________________________________________________________________________________________________ ☀ If you want to sell prints of this model, as well as all of my models - future and past , become an Authorized Merchant member of…
I have 8x3mm magnets instead of 6x3mm magnets which the original thing was designed for so I just enlarged the magnet hole in tinkercad. I used a hole diameter of 8.2mm in the design, and my 8x3mm magnet press fits in perfectly and holds…
Thor's hammer Mjolnir made into a Bic pen holder. All can be printed without supports brim is needed for pen. Infill 20% Original plain pen holder in file and hammer head with no protruding for flat printing on bed instead of standing…
I'll add to the pantheon as I make them.
Complete your Thor cosplay with this mighty hammer! This is a 3d model of Mjonir from the marvel movies. I have tried to make this as accurate as possible with different screen captures and behind-the-scenes pictures of the prop. I have…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- Continuing the “origin of containerization”-theme in…
Thor Marvel - wall art, easy to print
Replica of Mjolnir as appearing in Thor Love and Thunder. Shattered by Hela, the reformed hammer is wielded by the mighty Thor, Jane Foster, and can seperate and re-combine at will. This hammer is made up of 65 unique, magnetised pieces…
This design took me a couple weeks to get right. Both swords are my best representation of a replica of the swords Thor used during the arena scene with The Hulk. The real swords are 0.90m (3ft) and these swords are right at the 3ft mark.…
Draft-made shell for AYN Thor. My original TPU shell delivery was delayed, so I made my own. I printed it with ABS, and it works fine. Printed with 75A TPU - is good too. This shell makes the Thor a little bigger, more comfortable, and…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
avengers wall art set (spiderman, thor, ironman, hulk, captain america), easy to print
This is a remix of ChaosCoreTech's life size Mjölnir. Actually, it's more a make than a remix - I only treat it as a remix because I had to fix two parts of the handle (they were non-manifold, Slic3r didn't like them at all). No actual…
I modified my bowties models so that the necklaces could be printed as well. (If you prefer a version with a ribbon, check my profile ;) ) One of the files is a pdf explaining how to print and assemble.
Usage These are designed to be used during rope bondage/shibari to add some extra sensation and fun. The wedge shape lets you easily get them under tight wraps and deep enough to keep them from moving or flipping out sideways. The…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- Collect and Delivery means the service provided by…
I wanted to print something for my wife for valentines day. I liked the rose petals from XYZWorkshop ( http://www.thingiverse.com/thing:152642 ), but wanted a better stem than a 3mm filament. I designed two different stems, one with and…
This is made for the right shoulder
An authority counter meant to replace the stock set of 18 authority tracking card in the Star Realms card game. The counter fits in the base game's deckbox (with the authority cards removed). Print instructions Supports may be necessary…
The Thorned Rose Reliquary is a gothic winter maquette capturing eternal beauty frozen in time. A single blooming rose rises within a cathedral-like frame, its stem entwined with thorns and surrounded by candlelit spires. The…
Was the model/idea/guide helpful? Support us on Printables . Sharing or selling our digital files is not permitted. These remain our intellectual property. To obtain permission to sell physical prints of any of our designs, please…
This is a set of pieces that can be used to create a Marvel Classic Thor figure at 500% scale. This design is of our own creation but draws inspiration from the classic version of Thor in Marvel Comics. All of the stl files needed to…
---- Thors Hammer ---- I tried to make a "Thors Hammer" for my kid, I think it came out well enough to share. I sliced it with Simplify3D The Endcap I printed in 0.20 (infill 100% and Support) The Shaft in 0.24 (infill 40%) The Head in…
TUTORIAL : Print it in WHITE, it's very important. Buy the components : https://jeje-linge.fr/en/products/mjolnir-thor Code : https://github.com/jejelinge/THOR_MJOLNIR Libraries : Adafruit NeoPixel by Adafruit Layer : 0.2mm Infill : 15%
This hammer has exaggerated features that will still stand out if printed on a small scale. The tip requires a good filament and aggressive cooling to get right, but as you can see it's completly possible. (The Pyramids and UFO and the VW…
This is a reproduction of "The Dana Set of Wooden Crystal Models" originally produced by Dr. Krantz Rheinisches Mineralien-Kontor (Bonn). triclinic monoclinic orthorhombic hexagonal/trigonal tetragonal cubic I recreated the models based…
If you follow my blog or even my uploads here on Thingiverse you may have noticed that I'm a bit of a Disney theme park fan. So it may be no surprise that when I decided to try my hand at modeling something from reference images I chose…
Don’t have a resin printer? You may buy the model at N'Tastic Scale Models: https://www.ntastic-scale-models.co.uk/shop/under-licence-range-slanjonok-range/WLZIUUC3AWPRTNDKJOPXNJVZ ---- In several books you may find a photo of a…
Loki (Thor, Marvel) - wall art, easy to print
Rigged and posed on Blender a model provided by https://www.all3dfree.net/21119-marvel-008.html Printing: Printed with Cura tree supports, 15% infill and raft base. Problems: Top and bottom bits of hammer came off when removing supports,…
An old file from my Pepakura making days that I discovered in Pepakura Designer you can export to .OBJ and in "Windows 10 3DBuilder or 123Design" export to .STL. Unfortunately I don't have the skills yet to improve further on the model,…
Gopro Motocross Thor helmet mount
This is a homemade custom keycap designed to fit on Cherry MX switches. The design is based off the dimensions stated on the Cherry MX site. Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: Yes Resolution:…
Mjolnir thor hammer listo para imprimir de una pieza o para poder partir en varias y fabricarlo en un mayor tamaño
I removed the top plate from the model to be able to print it horizontally without supports I scaled down another top plate from another model and adapted it for this remix Print settings for the hammer: i use cura with this setting to…
