P
Printableskanga
Caliper (Centimeters)
A simple caliper design to measure objects up to 15 centimeters :) happy printing
Wydruk około 2,26 €–2,76 € nettoWstępna wycena jednego wariantu
- Pobrania
- 1646
- Polubienia
- 180
- Ocena
- 4,8
Wyniki wyszukiwania: timet
810 modeli
P
PrintablesMartin
Semi Circular Protractor 180 Degree Angle, Ruler Centimetres & Millimetres
Semi Circular Protractor 180 Degree Angle Ruler 0 to 9cm and 0 to 150mm Type: Protractor Size: 150 x 94 x 1.50mm
Wydruk około 1,25 €–1,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 1149
- Polubienia
- 80
- Ocena
- 5
P
PrintablesRo3Deee
Omega Tweezers for multimeter probes
Print settings: zero top layers zero bottom layers zero infill 3 perimeters 0.4 nozzle 0.2 layer height no supports I used PLA.
Wydruk około 0,36 €–0,44 € nettoWstępna wycena jednego wariantu
- Pobrania
- 237
- Polubienia
- 78
- Ocena
- 5
P
PrintablesPIZZA_CAT
DT830B DIGITAL MULTIMETER STAND
STAND for Digital Mulimeter DT830B (D), DT832, DT838 and many other clones. The stand consists of two parts. After assembly, the stand must be glued to the back of the multimeter. Easy and fast print!
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
- Pobrania
- 225
- Polubienia
- 34
- Ocena
- 5
P
PrintablesMartin
New 360 Degrees Protractor centimetre (cm) And Inch
Type Protractor Size: 150 x 150 x 1.50mm 360 Degrees Protractor 0 to 9 centimetre (cm) And 0 to 3 Inch
Wydruk około 1,73 €–2,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 210
- Polubienia
- 26
- Ocena
- 5
P
PrintablesMike B
Mastercraft MultiMeter Box
As an experiment in transparent printing, I embossed hexagons into the lid to make it half as thick except for the ribs between the hexagons, and printed in 3D Printing Canada PC+ Transparent filament using a max of 20 mm/s for the bottom…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 132
- Polubienia
- 18
- Ocena
- 5
P
PrintablesTimon
Parametric Multimeter Probe Cap
Did this ever happen to you? Worry no more! It might not be the most aesthetic solution but it's simple and it works. The files are just examples for my probe (8/37mm)
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
- Pobrania
- 131
- Polubienia
- 24
- Ocena
- 0
P
Printablesjflick
Kaiweets KM601 multimeter holder
I made this holder so that I could suspend the Kaiweets KM601 meter underneath a shelf. The KM601 has the test lead connections on the bottom of the meter, which is problematic. Because of the test lead entry, I made the holder so that…
Wydruk około 0,92 €–1,13 € nettoWstępna wycena jednego wariantu
- Pobrania
- 47
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDominik Chuchlík
HSW Emos MD-310 Multimeter mount
Remix of @forsaken_candy 's multimeter mount for Emos MD-310, or any multimeter that fits dimensions up to 74x32mm(length x width)
Wydruk około 2,69 €–3,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
- Pobrania
- 32
- Polubienia
- 4
- Ocena
- 0
P
PrintablesBlayne Bartter
Klein Multimeter/Voltmeter Holder
Holder for Klein MM325 multimeter. Mounts with 2 #10 screws. Tolerance to hold leads are tight. If your machine can't hold a tight tolerance it may need to be scaled up slightly (<5%).
Wydruk około 6,63 €–8,10 € nettoWstępna wycena jednego wariantu
- Pobrania
- 30
- Polubienia
- 5
- Ocena
- 0
P
PrintablesElliot the Maker
Classic 3mm Ruler in centimeters and inches
Classic Ruler design because I need a good ruler.
Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu
- Pobrania
- 21
- Polubienia
- 0
- Ocena
- 0
P
PrintablesREMLURELMI
Multimeter Strap Lead holder with Extra Fuse Storage
Recommended print settings: Material: PLA/PETG Layer Height: 0.20 mm or less Infill % : 15+ Supports: Yes, Tree/Organic Print Orientation: Default as modeled Brim: Optional
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
- Pobrania
- 7
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFilip Skopal
Kufr pro multimetr - universální
Universální kufr nejen pro multifunkční měřáky. Pro upevnění pantů a zámků použijte M3 x 30mm. Žádné podpěry.
Wydruk około 0,34 €–0,41 € nettoWstępna wycena jednego wariantu
- Pobrania
- 6
- Polubienia
- 2
- Ocena
- 0
P
PrintablesQED_Maestro
Multimeter (DMM) probe tweezer
Variation of other multimeter probes with focus on removing support requirements and easy slotting of probes. Two versions, for two most common diameter probes. Print in PETG for maximum usability.
- Pobrania
- 20 835
- Polubienia
- 5669
- Ocena
- 4,85
P
PrintablesPrint@Hive
multimeter tweezers
A practical probe holder designed to keep multimeter test leads firmly in place while working on electronics, microcontrollers, PCBs, and electrical circuits. It acts as an extra hand, allowing users to perform measurements more…
- Pobrania
- 4559
- Polubienia
- 1391
- Ocena
- 4,29
P
PrintablesCrazy_engineer!
Multimeter probe tweezer
This is a remix of the popular Multimeter (DMM) Probe Tweezer made by QED_Maestro. Description This model provides a convenient way to hold both of your DMM probes with one hand. The upgraded secure holders prevent the probes from falling…
- Pobrania
- 4265
- Polubienia
- 939
- Ocena
- 4,73
P
PrintablesMateusz Tokarz
One-Hand Multimeter Probe Tweezer Adapter
BOM: Printed with ROSA3D High Speed PLA Signal Violet This tool converts two standard multimeter probes into a pair of testing tweezers , letting you measure components and contacts with one hand . Ideal for SMD parts, tight spaces, or…
- Pobrania
- 2779
- Polubienia
- 972
- Ocena
- 4,9
P
PrintablesHEARTBEAT CREATIONS
Harry Potter Timeturner Fidget Toy
Harry Potter Timeturner Fidget Toy 3 styles 1. center is flat sided and engraved words 2. center is rounded and engraved words 3. center is rounded and embossed words. All files come with both one and two chain holes to pick from to make.
- Pobrania
- 2725
- Polubienia
- 551
- Ocena
- 4,6
P
PrintablesTrueShocker
HSW Multimeter Holder
I wanted to put my DM830D multimeter on my honeycomb storage wall, so i made this part. Sharing it in case someone has the same need…
- Pobrania
- 2136
- Polubienia
- 442
- Ocena
- 4,9
P
PrintablesMDHR
Rugged Multimeter Box With Insert (AstroAI DT132A)
A box I remixed for my multimeter. The lightning bolt was just a random .SVG I found and put in bambuslicer. Will require 6x M3x20mm screws for the hinges and latches. I super glued the insert in so it stays in place. I printed mine out…
- Pobrania
- 1853
- Polubienia
- 735
- Ocena
- 5
P
Printablesmrusk
Altimeter for Flight Simulation
The next member of my Flight Simulation Sixpack family has arrived: A fully 3D printed Altimeter without need for any metal axles. Articulation by a standard stepper motor similar to the Attitude Indicator and an encoder for the Baro…
- Pobrania
- 1816
- Polubienia
- 210
- Ocena
- 5
P
PrintablesWavz3D
Multimeter probe tweezers
Great original design by QED. Reinforced tweezers to hold your Multimeter Probes Print in PETG preferably for strength and a little flexibility.
- Pobrania
- 1605
- Polubienia
- 175
- Ocena
- 4,94
P
PrintablesVoenie
rugged box for cheap multimeter
Rugged box for my multimeter I bought for €5. It will probably not be too durable so I wanted a case for it. It fits great without rattling and the probes fit without disconnecting them (I fear the connectors are cheap and would break…
- Pobrania
- 1217
- Polubienia
- 394
- Ocena
- 4,8
P
PrintablesYEHALABS
Digital Multimeter (DMM) Probe Tweezer
Digital Multimeter Tweezers – DIY SMD Test Probe This is a custom-designed digital multimeter tweezer attachment that I designed from the ground up to make testing SMD (Surface-Mount Device) components faster, easier, and more accurate.…
- Pobrania
- 1062
- Polubienia
- 392
- Ocena
- 5
P
PrintablesWarlock Til
Multiboard multimeter mount
Slicer settings and other info: PLA 0.4mm nozzle 0.2 layer height 15% gyroid infill Supports enabled Brim highly recommended Inner dimensions (W x L x H): Small slot: ~36x73x100 Big slot : ~46x86x100 XL slot: ~54x92x100 The light blue big…
- Pobrania
- 1034
- Polubienia
- 111
- Ocena
- 5
P
PrintablesPaulden2745
Multimeter Hardcase
I made this hardcase for my multimeter and the accessories, but can used for other purpose
- Pobrania
- 971
- Polubienia
- 329
- Ocena
- 5
P
Printablessnuggl8tor
Harry Potter Timeturner
This model comes with 7 printable parts. I super glued the nubs/handles on the sides. The only supports needed are for the nubs/handles. The hourglass is printed in two parts so you can easily make a mold out of them and then use that…
- Pobrania
- 915
- Polubienia
- 358
- Ocena
- 5
P
PrintablesKinchey
Multimeter Box
A remix of the parametric toolbox to hold the Aldi Ferrex multimeter. The multimeter dimensions are: 175mm x 95mm x 45mm. The box has space for the manual underneath, the prong things on the right, and some sticky foam from bunnings to…
- Pobrania
- 862
- Polubienia
- 126
- Ocena
- 5
P
PrintablesCaptainBobSim
Cessna 172 Altimeter for Flight Simulator
The Cessna 172 Project Altimeter Bill 'o Materials: 📦 3D Printed Parts 📦 Arduino Mega 2560 (can be shared with other components) 📦 Decal (You can use a shipping label) 📦 (8) M3x6mm screws 📦 (4) M3x20mm countersunk screws 📦 (3) BYJ-48…
- Pobrania
- 853
- Polubienia
- 71
- Ocena
- 5
P
PrintablesWoj
Tweezer Multimeter Mod
This is a spring-like mod for multimeters that can turn the regular probes into a tweezer-like probe. This is nice as it can free up a hand in some use cases. Insert the wires first into the slot then slide the mod down until the probes…
- Pobrania
- 789
- Polubienia
- 181
- Ocena
- 4,88
P
PrintablesIan Noriega Nuñez
Multimeter holder for Honeycomb storage wall
Hole for M3 hardware. No supports needed.
- Pobrania
- 751
- Polubienia
- 103
- Ocena
- 4,67
P
PrintablesPaul
Skadis Multimeter Mount
Designed around the low cost Kaiweets KM100 model multimeter. The cutouts allow storage and use while mounted. Print using supports for the pegs on the back of the holder.
- Pobrania
- 734
- Polubienia
- 150
- Ocena
- 5
P
PrintablesNickSoft
Multimeter Tweezers Remix
I made this model from scratch. The original design is really good, but I wasn't satisfied with the probe holders. The walls were too thin, and the rounded bottom didn't print well and eventually snapped. Even though I redesigned the…
- Pobrania
- 713
- Polubienia
- 263
- Ocena
- 4,83
P
Printablesmathiasl
Multimeter Holder for Honeycomb Storage Wall
Remix of Libor z Radotína multimeter holder to fit the original Honeycomb storage wall and I also had to make a longer version to fit my multimeter (UNI-T UT133B). Uses M4 insert to attach it to the wall. Link to a collection of my other…
- Pobrania
- 684
- Polubienia
- 135
- Ocena
- 5
P
PrintablesNoWarrenty
Gridfinity Multimeter Stand
For Multimeters with size of ~90x~42x~200. Includes cable Routing, Probe- and Thermistor Storage. Sources Included. My rubber-sided multimeter with 90mm width sits tight in there, i can turn the knob without it moving.
- Pobrania
- 644
- Polubienia
- 141
- Ocena
- 5
P
PrintablesHobbesdcc
Multimeter Pegboard Holder
Pegboard holder for a Multimeter, One with the Pegs already in it and one with the pegs as separate parts (good if you just want mounting holes instead) Version 2: Has the PEGS BUILT IN! and Custom in model SUPPORTS for the pegs!! Print…
- Pobrania
- 637
- Polubienia
- 130
- Ocena
- 5
P
PrintablesCoat
Nice case for your Multimeter or...
A nice and sturdy case for your multimeter or something else. Unscaled the max. measurements for the multimeter are 200x100 mm. The outer size is max. 208x170.6 mm (lid). Included is a version with and without "Multimeter" at the outside.…
- Pobrania
- 570
- Polubienia
- 81
- Ocena
- 4,88
P
PrintablesBlackcrow
Harbor Freight Multimeter Probe Holder
Remix from: https://www.thingiverse.com/thing:5513241 Added legs for stability when laying down on its back. UPDATE: I've made a pegboard cradle for use with this model. See it at:…
- Pobrania
- 566
- Polubienia
- 163
- Ocena
- 5
P
Printablesitscollin
Multiboard Multimeter Holder
A simple holder for a multimeter. Built for the multiboard using the multiconnect system. Same/similar design as https://www.printables.com/model/781857-multiboard-multimeter-mount except sizing of large side is: 80w x 40d x 80h.
- Pobrania
- 523
- Polubienia
- 86
- Ocena
- 5
P
Printableszyzzyva
Multiboard Multimeter Mount
A simple mount for a multimeter, fits up to up to 94x42mm and has additional slots for leads or other accessories.
- Pobrania
- 515
- Polubienia
- 73
- Ocena
- 5
P
PrintablesFruitieX
Gridfinity multimeter holder
Link to the crappy multimeter I have: https://www.clasohlson.com/fi/Yleismittari-UNI-T-UT132E/p/Pr365256000 I've printed a 1x1x12 plain bin to hold the probes/cables in place. Use magnets + weighted baseplates to prevent these from…
- Pobrania
- 502
- Polubienia
- 138
- Ocena
- 4,5
P
PrintablesJoe-Joe Joe
Case multimeter DT830D
Simple box for multimeter DT830
- Pobrania
- 484
- Polubienia
- 176
- Ocena
- 5
P
PrintablesSimplyHong
Multimeter Pegboard Holder (Skadis)
[Updated version 2.0 here] Print upright with support enabled. Very important: the inserts are meant for ikea skadis pegboard, not tested on different other pegboards. 13 July 2023 Update: If you have printed the original holder, there…
- Pobrania
- 484
- Polubienia
- 74
- Ocena
- 4,83
P
Printablesswablab e.V.
HSW Multimeter holder
A holder for a multimeter up to 94x42mm with additional holders for the test leads.
- Pobrania
- 474
- Polubienia
- 69
- Ocena
- 5
P
Printablesyetzt
Skadis Multimeter Holder
A simple holder for a generic Multimeter, 72×52mm box size and ⌀10mm Probe holders. Builtin support for the hooks that easily snip off with flush cutters, no other support needed. Walls are 1mm Derived from a Skadis Storage Box by…
- Pobrania
- 459
- Polubienia
- 63
- Ocena
- 4,4
P
PrintablesLyrkan
Rugged case for ZT-703S / ZT-702S Oscilloscope/Multimeter
This is a remix with added inserts of the excellent parametric rugged box that can hold a ZT-703S oscilloscope/multimeter (or a ZT-702S since they share the same dimensions) and some of its accessories. The two grids have to be glued in…
- Pobrania
- 434
- Polubienia
- 84
- Ocena
- 5
P
PrintablesJoshua Venter
Multimeter Holder (HSW)
I liked @TrueShocker ‘s Multimeter design however my old multimeter was slightly too large to fit, so I created a slightly larger holder from scratch, based on on @TrueShocker ’s design. Enlarged the holder area and also the holes for the…
- Pobrania
- 418
- Polubienia
- 60
- Ocena
- 5
P
PrintablesErremartin
Rugged box for Parkside multimeter
In this remix, the Parkside brand logo was added and custom made to fit the multimeter just right, also leaving a space at the top and bottom to put foam so that the tool is not damaged. Necessary materials 6 m3x30 screws.
- Pobrania
- 418
- Polubienia
- 113
- Ocena
- 5
P
PrintablesHesed
Multimeter Mount
This multimeter mount was designed specifically for an AstroAI DM6000AR. However if might work for other multimeters as i have not tried.…
- Pobrania
- 414
- Polubienia
- 48
- Ocena
- 5
P
PrintablesKim-Janosch
IKEA SKADIS Multimeter Holder
Multimeter on the wall, upright and ready to use. A holder for IKEA SKADIS pegboards. Part of my SKADIS system: every holder uses the same peg, sits flat on the board and prints without supports. Features Frees up space on your workbench…
- Pobrania
- 411
- Polubienia
- 93
- Ocena
- 5
P
Printablesadam0909
Skadis holder for Parkside multimeter
I wanted to create a multimeter holder for my Skadis board in which all the buttons are still reachable because most of the time I only need for 1 or 2 quick measures. I also added a cable holder to the right so everything can be tucked…
- Pobrania
- 407
- Polubienia
- 83
- Ocena
- 4,83
P
PrintablesTycheMiner
MultiMeter Desktop Stand
This is a Stout MultiMeter Desktop Stand that also has a stow place for the leads and cables. The multimeter sits secure in a slight rear angled recessed mount. I have tried countless stands from different sites and all kept falling over…
- Pobrania
- 405
- Polubienia
- 157
- Ocena
- 5
P
PrintablesHovdis
Gridfinity - multimeter holder
As I wanted my multimeter in a drawer, and all I saw online was holders for multimeters standing tall. So then I made this :) I made the general shape of the bin pretty generous, so I'm guessing most normal multimeters will fit. Aswell as…
- Pobrania
- 399
- Polubienia
- 82
- Ocena
- 5
P
Printablesrotanimal
Honeycomb Wall Multimeter Holder
I couldn't find a multimeter holder that fit my model so I made one. I copied Ian Noriega Nunez's probe attachment idea. The inside is 69mm x 35 mm. Prusasliser gives a warning about the overhangs but it printed perfectly on my MK3S+.
- Pobrania
- 391
- Polubienia
- 77
- Ocena
- 5
P
PrintablesCuddle Trouble
Multimeter Probe Tweezers (TPU)
I designed these to work with my Craftsman multimeter probes, they may or may not work for yours. The probes snap in so that they will not fall out. Printed without supports using 95A TPU. Do not print with PLA or any filament that is not…
- Pobrania
- 373
- Polubienia
- 271
- Ocena
- 5
P
PrintablesAxField
Fluke Multimeter holder for HSW
A nice and sturdy HSW mount for modern Fluke MultiMeters. Tested to fit both the Fluke 15B and 17B range of meters, but others like the Fluke 101, 106 and 107 should also fit.
- Pobrania
- 371
- Polubienia
- 52
- Ocena
- 5
P
Printablesctheroux
Parametric Multimeter Probe Tweezer
This is a parametric multimeter probe tweezer. This parametric design shall fit all multimeter probes. Support material is required on the build plate only. An infill of 30% is recommended. This object's main web page is:…
- Pobrania
- 368
- Polubienia
- 75
- Ocena
- 4,5
P
PrintablesGabC
Skadis multimeter holder
This tray is designed around an Extech MN16A multimeter but it can work with others. Requires 2 of my universal peg plates . Print with supports. The holder could be used with other pegboard systems if you design peg plates for it.
- Pobrania
- 360
- Polubienia
- 99
- Ocena
- 5
P
Printablesespn8-theocho
MissileWorks RRC3 Altimeter
I was making an avionics bay and went off on a tangent with my calipers and made a lot more detail than i needed to. The Perimeter of the PCB is exact along with the 4 securing holes which i pulled from MissileWorks directly. Everything…
- Pobrania
- 345
- Polubienia
- 11
- Ocena
- 5
P
PrintablesSkyberries
Multimeter lead backpack
I made this little clip on backpack to wrap the wire of my multimeter leads around to keep things a little more tidy. Super handy print jajaum3d! top notch work. I fixed the two peices with some M3 flathead screws, but you could also just…
- Pobrania
- 340
- Polubienia
- 197
- Ocena
- 5
P
Printablesspuder
Peg Board Multimeter holder
Holds a multimeter to a pegboard. Works with my particular multimeter which is slightly more than 2 inches wide. Can also work with multimeters that are exactly 2 inches wide (by printing two of the same part), or meters that are slightly…
- Pobrania
- 336
- Polubienia
- 99
- Ocena
- 5
P
PrintablesModell-Design-Berlin
Skadis Multimeter Holder Voltcraft
Multimeter Halter Voltcraft VC130 IKEA Skadis
- Pobrania
- 331
- Polubienia
- 38
- Ocena
- 4,33
P
PrintablesJan
Board mount for Owon XDM 1041 Benchtop multimeter
Get your benchtop multimeter away from the bench. Clears some space. Print, snaps in original foots, 4 x M3 screws needed. If you have this thing, you will know what to do.
- Pobrania
- 323
- Polubienia
- 32
- Ocena
- 5
P
PrintablesShabubu
Multimeter Pegboard Holder
Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/7fvnORfahl8-kaiweets-multimeter-pegboard-holder Print…
- Pobrania
- 316
- Polubienia
- 47
- Ocena
- 5
P
PrintablesBrad @ FTBT 3D
Curvier Multimeter Holder - HSW
This is a remix of the multimeter holder by TrueShocker. I just made it curvier with less harsh corners to fit the aesthetic of my other HSW holders. Print Settings: Layer Height: 0.28mm (or less) Filament: PLA Infill: 15% This is part of…
- Pobrania
- 310
- Polubienia
- 49
- Ocena
- 5
P
Printablesdereki22
Honeycomb Wall Multimeter Holder
This is intended to be used with the honeycomb storage wall https://www.printables.com/model/152592-honeycomb-storage-wall It should be large enough to hold most multimeters, I designed it to be a snug fit with the Fluke meter I have.
- Pobrania
- 310
- Polubienia
- 52
- Ocena
- 5
P
PrintablesKrzysztofGW
BSIDE Multimeter (DMM) Probe Tweezers
Thanks to @QED_Maestro for his brilliant idea of simple tweezers for one handed measurements. Now optimised for BSIDE DMMs. Compatibility: A10 S10 S11 S20 not with S30 / S30X In the photo is the RC ;)
- Pobrania
- 303
- Polubienia
- 26
- Ocena
- 5
P
Printablesjonnybergdahl
Multimeter Probe Holder
This is a multimeter probe holder for 4 probes. I have included the Fusion360 design files for easy remixing.
- Pobrania
- 302
- Polubienia
- 39
- Ocena
- 5
P
PrintablesMike Stanbro
Rugger Box for a UNI-T UT-210E Multimeter
This is a remix of the popular parametric Rugger Box design by Whity. I used the author's Fusion 360 CAD file to adjust its size and then added a custom liner that fits the outline of the multimeter. The lid was also modified to provide…
- Pobrania
- 299
- Polubienia
- 95
- Ocena
- 5
P
PrintablesMaschbauboy
Rugged Voltcraft Multimeter Box
I used the parametric Rugged Box from Whity to create this. I placed the logo model in the lid file for easy alignment. The logo is 0.2mm thick so it is only one layer high. the lid has an indentation for the Logo. If you don't have a…
- Pobrania
- 298
- Polubienia
- 33
- Ocena
- 5
P
Printablesaspoon
AstroAI DM6000AR Multimeter Skadis Mount
Just a quick remix to allow herman_v96's multimeter mount to fit an IKEA Skadis board. The universal hook from CSD_Salzburg is also included. Just print the mount and two hooks and you are good to go! Print Settings Printer Brand:…
- Pobrania
- 288
- Polubienia
- 29
- Ocena
- 5
P
Printablesmathewsamuel
HSW - AstroAI AM33D Multimeter
Very minimal supports are needed for the mounting bracket. This is optimized to save space on the wall. It also has storage in the rear. You can store the lead cables there.
- Pobrania
- 266
- Polubienia
- 69
- Ocena
- 5
P
Printablesmakaaberi
Multimeter holder for Ikea Skådis
Made for use with two (2) Universal Hooks from : https://www.thingiverse.com/thing:2853257/files Huge thanks to CSD_Salzburg for the hook design. My multimeter is about 70mm wide and 26mm thick.
- Pobrania
- 266
- Polubienia
- 47
- Ocena
- 5
P
Printablescreateminds
HSW Multimeter Holder Uni-T
Created this HSW holder for my multimeter. Holds a Uni-T UT61D and similar sized multimeters nicely. Unlike other holders, this one is rotated by 90 degrees to reduce the footprint on the wall. Height with multimeter 18cm, depth in front…
- Pobrania
- 255
- Polubienia
- 30
- Ocena
- 4,67
P
Printableskstuken
HSW Multimeter Holder
A holder to attach my Amazon Commercial Multimeter to my honeycomb storage wall. I have taken idea and design from TrueShocker's model, which unfortunately was too small for my multimeter. This model is a re-design from scratch, though.…
- Pobrania
- 254
- Polubienia
- 45
- Ocena
- 5
P
PrintablesDm+
multimeter probe holder for easy one-handed changing
Multimeter probe holder for easy one-handed changing. Two probe sizes with a diameter of 10 mm and 8 mm. держатель щупов мультиметра для удобного изменения одной рукой. Два размера щупов диаметром 10 мм и 8 мм.
- Pobrania
- 253
- Polubienia
- 23
- Ocena
- 0
P
Printablesbodgerator
HSW Multimeter Mount - Side Storage & HSW Pegs
Storage for multimeters of a “Shield” style shape (modelled after a Etekcity Digital Multimeter). Side clips allow loose storage of probes with compartment for loose cabeling. Rear contains x2 Hex Pegs for HSW
- Pobrania
- 253
- Polubienia
- 52
- Ocena
- 5
P
PrintablesKenneth Tan
Aneng 622B Multimeter Desktop Stand.
The perfect stand for the Aneng 622B on your desktop. In the version in photo, the upper Probe clamp is present. In the STL there is also a lower clamp to give the probes more stability. Print this stand on the left side with 20% infill…
- Pobrania
- 250
- Polubienia
- 22
- Ocena
- 4,5
P
Printablesndoktor
Multimeter Probe Cover
I modeled this to replace misplaced covers for my Fluke 115 Multimeter probes using another meter as reference. Printed in Octave black PLA and Polymaker red PLA. Print Settings Printer: Cetus Rafts: Yes Supports: Doesn't Matter…
- Pobrania
- 249
- Polubienia
- 33
- Ocena
- 5
P
PrintablesSudonem
Craftsman Multimeter Pegboard Mount
This is a dead simple pegboard / wall control mounting cradle for my trusty Craftsman 82029 Auto-ranging Multi-meter. This is one of my first designs from years ago and could likely use some refinement - but it's been pretty popular on…
- Pobrania
- 242
- Polubienia
- 53
- Ocena
- 5
P
PrintablesH3dSprint
Box for multimeter with rotary lock
Design goals: store the multimeter with connected measuring cables in a box cover of box shall have a lock multimeter box shall stand stable if cover is opened to perform measurements Design: All designed parts of the box are printed out…
- Pobrania
- 235
- Polubienia
- 64
- Ocena
- 5
P
PrintablesShabubu
Multimeter Multiboard Holder
Wanted a holder for my multimeter that is easy to grab. There is a slot for the multimeter, as well as, a slot for the probes. Feel free to tinker: https://www.tinkercad.com/things/htkaNsVCoCQ-kaiweets-multimeter-multiboard-holder Print…
- Pobrania
- 235
- Polubienia
- 43
- Ocena
- 5
P
PrintablesPaolo
Multimeter FLUKE 87 III - probe tweezer
Thanks to QED_Maestro for his brilliant idea Print as oriented Supports: no Infil 25% Filament: PLA If you download/enjoyed this file, please leave a like Thanks
- Pobrania
- 230
- Polubienia
- 30
- Ocena
- 3
P
PrintablesPascal
Aneng AN8008 Multimeter Skadis Holder
Using hooks from https://www.thingiverse.com/thing:2853261 Category: Organization
- Pobrania
- 222
- Polubienia
- 30
- Ocena
- 5
P
PrintablesPhobos
Large Multimeter Holder for Honeycomb Storage Wall (HSW)
Just a simple rectangular box with slightly rounded edges (1mm radius). Needs 2 x M3 inserts in the Honeycomb Storage Wall ecosystem. No supports needed.
- Pobrania
- 220
- Polubienia
- 61
- Ocena
- 4,5
P
Printableskvn5x4
Fluke 179 Multimeter Storage - Gridfinity
Update 5/29/2025 I made a slight tweak to the model that reduced the floor of surrounding area around the tool. I lowered it to save on material, reduce overall print time, and make it easier to get it out of the bin. I've kept the…
- Pobrania
- 220
- Polubienia
- 24
- Ocena
- 2
P
PrintablesRon
Multimeter holder for Honeycomb storage wall
Simple holder for my Multimeter, fits securely and has little holders on the side for the test leads. Mine is printed with PLA and it fits perfectly. You may need to resize slightly for your own multimeter.
- Pobrania
- 217
- Polubienia
- 33
- Ocena
- 5
P
Printableslufa
HSW multimeter holder
Ich habe einen Halter entworfen in dem das Messgerät mit angesteckten Kabeln untergebracht werden kann. Die Fachgröße für das Messgerät beträgt 87x36 mm.
- Pobrania
- 217
- Polubienia
- 39
- Ocena
- 4,5
P
PrintablesEumldeuml
Multimeter tweezers
As the name suggests, this quick print converts your multimeter into a one-handed tweezer-style measuring device. The tips are held with friction which is very strong due to the taper on the tips and the slight elasticity of the material.…
- Pobrania
- 213
- Polubienia
- 74
- Ocena
- 0
P
PrintablesPaw Prints
Reinforced Multimeter Probe Tweezer/Holder
Recommended settings: 4+ walls and 100% infill for best strength. Please let me know in the comments if yours broke and where it can be reinforced!
- Pobrania
- 212
- Polubienia
- 19
- Ocena
- 5
P
Printablescodysechelski
Gridfinity Klein Tools Multimeter Holder
It took me over a year to finally stop procrastinating and model up a bin for my Klein Tools MM400 Multimeter. The thing is just so hard to measure. I tried scanning it a few times but was never happy with the results. I finally decided…
- Pobrania
- 209
- Polubienia
- 54
- Ocena
- 5
P
Printableskitlaan
Tiny Multimeter Probe Holder (for Honeycomb Storage Wall)
2-piece holder for a (tiny; crappy; can't remember the brand) multimeter. Instructions: Print the 2 pieces. Print the M4 HSW Insert. Combine the Clip to the Insert using M4x8 screw and nut; this goes onto the wall. Mount the Multimeter to…
- Pobrania
- 207
- Polubienia
- 38
- Ocena
- 5
P
PrintablesVille Skogberg
Skadis multimeter holder XL830L
Remixed version for cheap multimeter XL830L
- Pobrania
- 205
- Polubienia
- 25
- Ocena
- 4,6
P
PrintablesJdub
Honeycomb - Klein Multimeter Bracket
I'm no expert but it works well. Remixed using the Klein Multi-meter bracket from Thingiverse created by user alsch - https://www.thingiverse.com/thing:4262298. As per alsch “This mount is compatible with Klein MM300, MM400, MM600, and…
- Pobrania
- 193
- Polubienia
- 39
- Ocena
- 5
P
PrintablesBill S
Sturdy Big Multimeter Holder for the Honeycomb Storage Wall V2 (HSW)
All of the other HSW multimeter mounts couldnt fit this absolute unit of a multimeter. I took the hollow honeycomb STL from the original files and appended three of them to the back of a the large bucket in Blender, in my opinion having…
- Pobrania
- 191
- Polubienia
- 28
- Ocena
- 5
P
PrintablesJHGBaouns
Multimeter stand - gridfinity
This is a gridfinity storage for AstroAI DT132A Multimeter, it fits tight I have no problem with the multimeter staying in the holder when using it. I have made a hole for the temperature cable at the back and a holder where you can put a…
- Pobrania
- 189
- Polubienia
- 34
- Ocena
- 5
P
PrintablesKerrickStaley
Parametric Multimeter Holder for Skadis Pegboard
Multimeter holder / mount for the IKEA Skadis pegboard. Includes parametric FreeCAD file that you can use to adjust the size of the holder to match your multimeter. Instructions on how to customize the dimensions for your multimeter here.
- Pobrania
- 187
- Polubienia
- 18
- Ocena
- 5
P
PrintablesLush
Parametric Rugged Box with Handle EEVBlog 121GW Multimeter Digits Edition
Printed in PLA on Ender3V2. Tried to print with PETG, but the digits did not stick reliably on the print bed. For the lid, select NO to fix wrong scale and YES to load in group.
- Pobrania
- 187
- Polubienia
- 31
- Ocena
- 5
P
Printablesegeltje
Ikea Skadis Brymen multimeter container
This is a container for the Ikea Skadis pegboard to hold the Brymen BM235 multimeter. Dave Jones from EEVblog sells a branded version to support his Youtube channel. I originally designed it so you could leave your leads connected, but…
- Pobrania
- 185
- Polubienia
- 33
- Ocena
- 5