Wyniki wyszukiwania: tow

Sortowanie

9122 modeli

P
PrintablesTronnic

All in One Temperature & Bridging Tower - PLA & PETG GCode included

A Temperature Tower designed to find the correct temperature for your filament! The included .gcode is sliced using Simplify3D with the "Multiple Processes" tool to set the temperatures at different layer heights. Take a look at the…

Wydruk około 2,34 €–2,86 € nettoWstępna wycena jednego wariantu

Pobrania
85 712
Polubienia
4726
Ocena
4,83
P
Printablesfuchsr

Improved All-In-One Temperature and Bridging Tower -- Hi to Lo Temps, PLA/PETG/ASA/TPU/PCCF

Remix of Tronnic's bridging tower, with the temperatures from highest on the bottom to lowest on the top. This way, you shouldn't experience clogging issues if the lowest temperature is not enough to properly melt the filament. Many…

Wydruk około 1,65 €–2,01 € nettoWstępna wycena jednego wariantu

Pobrania
37 580
Polubienia
5605
Ocena
4,91
P
PrintablesArs Moriendi 3D

Desert's Kiss - Diorama Dice Tower

A detailed dice tower that can serve as a decorative diorama on its own. Prints completely support free. Happy printing! :) You're welcome to visit our shop at https://arsmoriendi3d.com/ Print instructions Print with your preferred…

Wydruk około 18,73 €–22,89 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
27 215
Polubienia
5656
Ocena
4,98
P
Printablesblove

Modular Hydroponic Tower

Complete list of parts and 3d models used to create your own Hydroponic Tower: https://kit.co/AllYourTech/3d-printed-hydroponic-tower-suggested-parts Today i'm putting together a 3d printed modular hydroponic tower garden. It's an…

Wydruk około 4,87 €–5,96 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
24 636
Polubienia
4184
Ocena
4,89
P
Printableskwik

Temperature Tower ready gcodes (ABS, TPU, PLA, ASA, PETG,)

Temperature towers with ready gcod and stl files. ABS- 220-260 and 10%fan speed in gcode ASA- 230-270 and 10%fan speed in gcode TPU/FLEX- 200-230 and 215-245 and 70% fan speed i gcode 20mm/s PLA- 190-230 and 100% fan speed in gcode PETG-…

Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
17 002
Polubienia
495
Ocena
4,9
P
PrintablesDJGummikuh

Stringing Test / Temp Tower

Very quickly slapped together Stringing Test. Markings 1cm apart so you can post-process z-height changes. Deliberatly no temperature numbers b/c they confuse when you use different temperatures (or - like me - test retract distances…

Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu

Pobrania
10 016
Polubienia
182
Ocena
5
P
PrintablesHD_Creator

Self releasing geared clamp hook for towels

Use-case This geared self-clamping and self-releasing hook is ideal to hold towels that have no hanger (or have an owner that is too lazy to use hangers). To hang up the towel, simply touch the lower lever slightly from the bottom and it…

Wydruk około 2,25 €–2,75 € nettoWstępna wycena jednego wariantu

Pobrania
5742
Polubienia
3273
Ocena
4,76
P
PrintablesConr8r

Upgraded Modular Hydroponics Tower - More Compact & Stable

Summary This is my version of the modular hydroponics tower. It was inspired by the modular tower here . It has several key upgrades. More Stable: This tower has a wider base attaching it to the nutrient reservoir making it much more…

Wydruk około 0,50 €–0,62 € nettoWstępna wycena jednego wariantu

Pobrania
5383
Polubienia
1549
Ocena
4,89
P
Printablesdroidik

Prusa Mini retraction tower (PLA, PETG)

1-6mm retraction tower that takes about 30 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Wydruk około 0,41 €–0,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3922
Polubienia
128
Ocena
5
P
Printables3D Printy

Dracula's Tower Puzzle Box

A tricky tower with a secret compartment and modular maze. https://youtu.be/VesEei_Eg8Y Printing No supports required Add a brim if curling or bed adhesion is an issue Requires accurate printing within +/- 0.2mm, or sanding may be needed.…

Wydruk około 10,36 €–12,67 € nettoWstępna wycena jednego wariantu

Pobrania
3781
Polubienia
1400
Ocena
4,94
P
PrintablesPeter Farell

Wicked Skull Dice Tower.

Wicked Skull Dice Tower. (UPDATED) UPDATED FILES: 4/28/2024 5:28PM CMT. NamingConvention: skulldicetowerfin (OLD FILES REMOVED) Thanks for your Input Raptor King. This is why I adore this community. Awesome feedback. New uploads have…

Wydruk około 34,23 €–41,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
3404
Polubienia
1137
Ocena
4,92
P
PrintablesRxR

Modular Dice Tower Castle Stairs

"Building a tower is an art. Building the tallest tower is a masterpiece! Take it from a wisard." - Saruman the White - Here's a remix of the fabulous "Dice Tower Castle Stairs" by Squinn , for players who want to touch the sky (or for…

Wydruk około 8,95 €–10,94 € nettoWstępna wycena jednego wariantu

Pobrania
3111
Polubienia
792
Ocena
4,87
P
Printablesdjedje_zr7

Fantasy Dice Tower

Finally finished! More difficult to design than I expected. Printing the portal is optional. No support needed. I'm trying to design the tower and the portal to avoid supports, use the minimum amount of plastic, and look pretty cool. I…

Wydruk około 2,66 €–3,26 € nettoWstępna wycena jednego wariantu

Pobrania
2880
Polubienia
552
Ocena
4,9
P
Printablesashurexm

PLA Short Smart Compact Temperature Calibration Tower

Tests from 195 - 210 for PLA on my Ender 3 w/ a Micro Swiss Hotend. Remixed from ([https://www.thingiverse.com/thing:2729076) https://www.thingiverse.com/thing:2729076 %5Bhttps://www.thingiverse.com/thing:2729076)] for testing my Ender 3…

Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu

Pobrania
2746
Polubienia
71
Ocena
4,86
P
PrintablesDaHouzKat

Dice Tower

Features Bigger, Better & Easier to print Each part can be printed individually The long bridge can be printed using support This is an updated version of my previous Dice Tower Be advised this model may be hard to print Your printer must…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
2693
Polubienia
674
Ocena
4,82
P
Printablesgiveen

Barad-dûr (Sauron's tower) dice tower

Set size to 465mm, cut into 3 pieces to fit on an Ender 3 and added connectors to make assembly easy. Set to 10% Gyroid infill on Pursa.

Wydruk około 12,78 €–15,62 € nettoWstępna wycena jednego wariantu

Pobrania
2179
Polubienia
462
Ocena
4,82
P
PrintablesTiques77

Tour Eiffel (quatre pièces)/ Eiffel tower 30 cm (four parts)

Tour eiffel d'environ 30cm en quatre pièces. Imprimé avec un pla gold de clorfabb en couche de 0.2mm Eiffel tower scaled to 30 cm and simply divided in four parts.

Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu

Pobrania
2086
Polubienia
214
Ocena
5
P
PrintablesDatBuschi

Stormtrooper helmet towing hook cover

Stormtrooper helmet towing hook cover With this you should be save not to hit anything with your towing hook, it‘s a stormtrooper what should he hit? But if you hit him with your leg, it will hurt. But anyway, it looks cool. Create your…

Wydruk około 4,96 €–6,06 € nettoWstępna wycena jednego wariantu

Pobrania
1902
Polubienia
342
Ocena
4,94
P
PrintablesFredslund

PRUSA Sorting Tower MK1 - Vase Mode

Check the new version: https://www.prusaprinters.org/prints/82892-prusament-sorting-tower-mk3 The sorting tower is made for filament PM spools and Prusament Spools. The draws are made for spiral vase mode, in order to reduce used…

Wydruk około 1,20 €–1,46 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1778
Polubienia
1298
Ocena
4,79
P
Printablesbobby_bossmann

Heat Tower for PETG

This is a simple Heat Tower for PETG from 250°C to 215°C. This is a remix of Milbo's heat tower

Wydruk około 1,04 €–1,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1767
Polubienia
66
Ocena
5
P
PrintablesDaveDude

Balcony Strawberry Tower with IKEA Persillade Modular Hydroponic

Features Modular structure, easily scalable, put modules together, twist & lock, done Filling module with cap 3-way planting modules (hollow version recommended) Internal/external water dispenser modules Lid Custom net pot for Jiffy-7 41…

Wydruk około 0,47 €–0,57 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1760
Polubienia
497
Ocena
4,75

Towel hook

Designed for bathroom heater with tubes of diameter 25mm (fi) and distance between tubes 9-11mm (gap). I discovered that distance between are randomly, so I decide add some “spring” to make locked mounted even that. Print on side - like…

Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu

Pobrania
1743
Polubienia
514
Ocena
4,86
P
Printablestoddanglin

MagicBand+ Charging Tower

Solve MagicBand+ charging chaos with this MagicBand+ Charging Tower. Designed to hold up to four (4) MagicBand+ charging cradles and a 4-port USB hub to consolidate everything to a single USB cable that needs to be plugged-in to charge…

Wydruk około 9,67 €–11,81 € nettoWstępna wycena jednego wariantu

Pobrania
1559
Polubienia
163
Ocena
4,8
P
PrintablesKehet

Dice tower with self loading mechanism

UPDATE! V2 now with fancy brick texture! 🎉 This self-loading dice tower can re-roll your dice by simply pressing the handle. Also works as a regular dice tower. Printing I used regular PLA for this print. No supports are needed, except…

Wydruk około 1,52 €–1,86 € nettoWstępna wycena jednego wariantu

Pobrania
1524
Polubienia
869
Ocena
4,61
P
PrintablesTrevor Petski

Beach Towel Clip

A clip to hold a towel to a beach chair.

Wydruk około 1,17 €–1,43 € nettoWstępna wycena jednego wariantu

Pobrania
1516
Polubienia
174
Ocena
4,86
P
Printablesthe_21_HER0

Moosstab Mittelalter Turm / Moss pole middle age tower

ein Moosstab der wie ein Mittelalter Turm aussieht

Wydruk około 5,49 €–6,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1288
Polubienia
229
Ocena
4,75
P
PrintablesSienna

Graded Temperature Tower PLA & PLA+, PETG

Test your filaments to find the best printing temperature. 3mf files for any other printer, just import as project, slice and you should be ready to go!!^^ Ready-to-print G-CODE for Creality CR-10 Smart Pro printers included. Remixed from…

Wydruk około 2,62 €–3,20 € nettoWstępna wycena jednego wariantu

Pobrania
1115
Polubienia
38
Ocena
5
P
PrintablesFredslund

PRUSAMENT Sorting Tower MK3

Here it finally is, the third version of the PRUSAMENT sorting tower. And this time it requires even less filament and have more features! Printing If you just wan to get started printing, just take the G-Codes or the .3mf slicer files…

Wydruk około 0,89 €–1,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
1007
Polubienia
503
Ocena
4,82
P
Printablestuc0w

Ender 3/5 PLA Temp Tower (BLTouch + Brim)

Why I remixed it I remixed this one because of a comment I read from DERacing: "I get around the 220 mark and the part snaps away from the glass bed." and exactly the same happend to me and as I couldn't find any premade Temperature Tower…

Wydruk około 1,11 €–1,36 € nettoWstępna wycena jednego wariantu

Pobrania
886
Polubienia
22
Ocena
4,8
P
PrintablesKamteix

Paper towel Voronoi design

Introducing a table-top paper towel holder featuring an intricate Voronoi pattern, designed for multicolor printing. This holder is both stylish and functional, adding a unique touch to your kitchen or dining area. Profile details : No…

Wydruk około 9,59 €–11,72 € nettoWstępna wycena jednego wariantu

Pobrania
880
Polubienia
190
Ocena
5
P
PrintablesGralastair Bean

fast 30 min temperature & bridging tower MK4S HF nozzle

Temperature towers should be fast and easy. I don't want to wait for hours just for a test. This tower is shorter and narrower than most models out there and uses increments of 10C to quickly get you close to the optimal temperature for…

Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu

Pobrania
813
Polubienia
87
Ocena
4,8
P
PrintablesRobertusMaximus

Megalopolis Pipe Dice Tower with a story!

Megalopolis Pipe Dice Tower with a story! You work deep in the bowels of the megalopolis. Often where man or beast fear to tread. Heavy weapons troopers stand at ready while you work. However, often they are no match for the diseased,…

Wydruk około 31,49 €–38,48 € nettoWstępna wycena jednego wariantu

Pobrania
771
Polubienia
116
Ocena
0
P
PrintablesJonHart

Temp Tower PLA Core One

Remixed and sliced for Temp Tower PLA Core One

Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu

Pobrania
699
Polubienia
60
Ocena
5
P
Printablesdroidik

Prusa MK3S+ retraction tower (PLA, PETG)

0.5-2mm retraction tower that takes about 40 mins to print. Feel free to customize the gcode and edit the M104 command with your desired temperature. Credits: https://github.com/kartchnb/AutoTowersGenerator

Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
692
Polubienia
18
Ocena
4,67
P
PrintablesAndrea Cecchini

Dice Tower Castle Stairs with D&D Logo

I remixed squinn's model and added the D&D logo

Wydruk około 8,56 €–10,46 € nettoWstępna wycena jednego wariantu

Pobrania
632
Polubienia
91
Ocena
5
P
Printablesckassoff

Georgia-Pacific paper towel dispenser key

I couldn't find a “key” that had both parts on it, so I sketched this one up

Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu

Pobrania
595
Polubienia
33
Ocena
5
P
Printablesjarza

Temperature and bridging tower for Prusament fine tune

Wanted a smaller temp tower to just fine tune Prusaments +- 10c of recommended temperature. These are PLA and PETG models. Also sliced with PrusaSlicer. 3mf model files includes custom g-code for different temperatures so you just need to…

Wydruk około 1,55 €–1,90 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
585
Polubienia
28
Ocena
4,5
P
PrintablesTD

Input shaper, ring tower, MK4 MK3.9 MK3.5

Klipper Gold Standard Model for testing INPUT SHAPER, including resonance compensation, ringing, ghosting, printer quality and general calibration. ::::PRINT SETTINGS:::: Suggested layer height: 0.2 mm. Infill: 0%. Top layers: 0. Use 1-2…

Wydruk około 1,64 €–2,00 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
542
Polubienia
26
Ocena
5
P
Printableshedo

Prusa Mini Temptower for PLA, wait for temperature change before continuing the print

Based on the "Prusa Mini Temptower for PLA, PETG and ABS" from steveleader (original Tower from Tronnic), just included commands to wait for the hotend to heat up before continuing the print: PrusaSlicer 2.3.0, Expert mode, tab "Print…

Wydruk około 0,63 €–0,76 € nettoWstępna wycena jednego wariantu

Pobrania
503
Polubienia
32
Ocena
4,67

Gringotts Dice Tower

Gringotts Bank Dice Tower - A cool dice tower I found on Thingiverse I added in a little extra support on the back nothing to fancy just to help it print a little better. The STL file is not scaled up but should roll a standard D20 just…

Wydruk około 17,12 €–20,93 € nettoWstępna wycena jednego wariantu

Pobrania
490
Polubienia
109
Ocena
5
P
PrintablesSusanov

PLA/PETG Temperature towers + GCODE for Ender 3 V3 SE

Temperature tower for PLA and PETG including the ready made G-codes for the Ender 3 V3 SE.

Wydruk około 1,94 €–2,37 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
475
Polubienia
11
Ocena
0
P
Printablesguyish1

Dark Souls Mushroom Child Dice Tower

I made this for a friend of mine who really likes the mushroom child from dark souls. As far as dice towers go, it's really basic, but it's the party of the party. The model itself will need to be resized manually in your slicer to fit…

Wydruk około 66,06 €–80,73 € nettoWstępna wycena jednego wariantu

Pobrania
433
Polubienia
125
Ocena
5
P
PrintablesRaKote

Temperature tower from 245 to 210 PETG

G-code is available with related modifications. A 0.4mm noozle printed on an Ender 3 is used.

Wydruk około 0,68 €–0,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
433
Polubienia
11
Ocena
0
P
PrintablesPeter Farell

Zapotec Dice Tower

Zapotec Dice Tower made from Zapotec funerary urn. (1) Zapotec funerary urn, 600-900 CE - Download Free 3D model by Minneapolis Institute of Art (@artsmia) [b15865a] (sketchfab.com) Halfway through I realized I had already done one a…

Wydruk około 12,26 €–14,99 € nettoWstępna wycena jednego wariantu

Pobrania
427
Polubienia
227
Ocena
5
P
PrintablesFredslund

PRUSA Sorting Tower MK1

Check out the new version: https://www.prusaprinters.org/prints/55640-prusa-sorting-tower-mk2 don't know what to do with your old prusa spools? make a sorting tower so you can organize all your small parts. works for all prusa spools!!…

Wydruk około 2,30 €–2,81 € nettoWstępna wycena jednego wariantu

Pobrania
401
Polubienia
145
Ocena
4,67
P
Printablesacademo

MK4, PLA, 0.4 nozzle, Input Shaper Temperature tower

This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.

Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu

Pobrania
396
Polubienia
23
Ocena
5
P
Printableshulkbuild

Starship Orbital Launch Integration Tower "Mechazilla""

All the parts are sized to print on a 200mm-class printer like an Ender 3. All parts should print without support except the top level of the tower, as it requires an insane amount of tree supports. I've included my gcode file for that…

Wydruk około 14,14 €–17,28 € nettoWstępna wycena jednego wariantu

Pobrania
351
Polubienia
62
Ocena
0
P
PrintablesGralastair Bean

PLA Temperature & Bridging Tower MK4S High Flow 0.4mm Nozzle GCode

All in One Temperature & Bridging Tower - PLA MK4S GCode. Specifically sliced for the latest MK4S version with the 0.4mm high flow nozzle (HF0.4) Uses the default PrusaSlicer 0.2mm STRUCTURAL preset as that is what you will most likely be…

Wydruk około 1,36 €–1,66 € nettoWstępna wycena jednego wariantu

Pobrania
327
Polubienia
36
Ocena
5
P
PrintablesCactus zim

worm dice tower

found this online and thought it was cool Original model: https://cults3d.com/en/3d-model/game/purple-worm-dice-tower Creator: https://cults3d.com/en/users/LittleTup/3d-models

Wydruk około 39,36 €–48,10 € nettoWstępna wycena jednego wariantu

Pobrania
325
Polubienia
54
Ocena
4
P
PrintablesMiguel M.

Over Door Towel Bar

A simple towel holder that allows you to hang a hand towel to a cabinet or vanity door. Printing There is nothing special about printing these. No supports. 20% infill is fine. I personally print with 3 or 4 perimeters to add a bit of…

Wydruk około 1,73 €–2,11 € nettoWstępna wycena jednego wariantu

Pobrania
324
Polubienia
113
Ocena
0
P
PrintablesRxR

Aria The Dragon for the Dice Tower Castle Stairs

"Why settle for a dice tower when you can have a dice tower with a dragon? Everything is better with dragons!" - Daenerys Targaryen - Transform your gaming table into a legendary kingdom with this majestic dragon, a remix of Aria the…

Wydruk około 1,89 €–2,31 € nettoWstępna wycena jednego wariantu

Pobrania
323
Polubienia
63
Ocena
4,85
P
PrintablesRosti

Dice Tower - Folding (Flat-Pack)

‘Sägertorn’ is a flat-pack dice tower. Not appearing at an Ikea near you any time soon. It incorporates 3 tumbling slats and a discharge ramp. Board games pack flat, why shouldn’t the dice tower? This tower can pack-flat into the top of…

Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
315
Polubienia
83
Ocena
0
P
PrintablesCelta

Wide Range Speed Tower 20-180 mm/s

This remix of two popular speed towers combines their ranges into a single model, covering speeds from 20 to 180 mm/s. This comprehensive range allows you to test various filaments, including those with low and high-speed capabilities.…

Wydruk około 0,80 €–0,98 € nettoWstępna wycena jednego wariantu

Pobrania
288
Polubienia
14
Ocena
3
P
Printablesneale

Small Parametric Temperature Tower

A Tiny Temperature Tower A small temperature tower you can tune to your liking, using OpenSCAD's customizer. I've included gcode for the Mk4 with input shaping. If you'd like me to provide a specific configuration of temperature range and…

Wydruk około 0,26 €–0,31 € nettoWstępna wycena jednego wariantu

Pobrania
287
Polubienia
18
Ocena
5
P
PrintablesPeter Farell

Zapotec Dice Tower.

Zapotec Dice Tower.

Wydruk około 31,80 €–38,87 € nettoWstępna wycena jednego wariantu

Pobrania
282
Polubienia
90
Ocena
0
P
Printablesacademo

MK4, PETG, 0.4 nozzle, Input Shaper Temperature tower

This is the gcode for a PETG temperature tower for the Prusa MK4 with Input Shaper firmware Profile: 0.2mm SPEED (no changes) Nozzle: 0.4mm Filament: Generic PETG (no changes) The temperatures goes from 215 to 250

Wydruk około 1,02 €–1,25 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
274
Polubienia
22
Ocena
5
P
Printablesmozgy

Temp and Bridge Tower - GCodes for MK4 and XL

Resliced temp&bridge tower for MK4 and XL slicer 2.6.0, PLA, brim, 0.20 DETAIL MK4 - 0.4mm XL - 0.6mm nozzle resliced for new FW 5.1.0 slicer 2.7.0, PLA, brim, 0.20 STRUCTURAL MK4IS - 0.4 nozzle XLIS - 0.6 nozzle

Wydruk około 1,83 €–2,24 € nettoWstępna wycena jednego wariantu

Pobrania
267
Polubienia
20
Ocena
5
P
PrintablesTimeOut@Home

Another Dice Tower v2 Compilation

I first ran across “Yet Another Dice Tower v2” years ago and printed many copies for myself and friends. Since then I have lost the files and it appears that the original model is no longer available. There are many derivatives of the…

Wydruk około 0,53 €–0,64 € nettoWstępna wycena jednego wariantu

Pobrania
258
Polubienia
61
Ocena
4,5
P
PrintablesJohn Simonsson

bathroom hook for towels

not much here just use the included gcode file and print. Attach to your wall using screws

Wydruk około 3,30 €–4,03 € nettoWstępna wycena jednego wariantu

Pobrania
248
Polubienia
36
Ocena
5
P
PrintablesMadPrints3D

Cars Tow Mater multi color sign for single color printers

The STL file is very small, you can size it for any printer. I have already added the filament changes to the 3mf file for the MK3s+, but if you resize it you will need to change the height of the filament changes.

Wydruk około 5,69 €–6,96 € nettoWstępna wycena jednego wariantu

Pobrania
243
Polubienia
42
Ocena
5
P
PrintablesAcE Krystal

The Next Towel // more hygiene, style and fun

The towel solutions that gives people their preferred level of hygiene. The impatient : Are you the type of guy that just doesn't care and dries his hands on what ever is in reach? No problem! The basket is made out of the original towel…

Wydruk około 1,92 €–2,35 € nettoWstępna wycena jednego wariantu

Pobrania
243
Polubienia
155
Ocena
0
P
Printablesskypy

Tiny Distance Tower Test - Retraction / Extrusion / Bridge ..

Material-saving distance tower test model suitable for dialling in most of the printing profile parameters, including retraction, flow/extrusion rate, temperature, bridge, ironing settings, and certainly many more. Optimized for 0.4mm and…

Wydruk około 0,11 €–0,14 € nettoWstępna wycena jednego wariantu

Pobrania
239
Polubienia
9
Ocena
5
P
PrintablesMadManU

cowboy hat towball cover

Print with supports

Wydruk około 5,96 €–7,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
206
Polubienia
19
Ocena
0
P
Printablestrose

2" Tow Hitch Receiver System for Kids Ride-On Vehicles (Powerwheels / Costway / Costzon)

Does your child's ride need an upgrade? Do they drive their favorite power wheels all around the neighborhood, but don't have room for all their tag-along toys? Look no further than this awesome tow hitch receiver system (and adapter…

Wydruk około 11,26 €–13,76 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
186
Polubienia
46
Ocena
0
P
PrintablesMichal K

Filament Dry Box IKEA Samla 22L - Base Tower +20/ +25 mm

Modification of Base Towers for Filament Drybox Ikea Samla 22L from pixelwave. Printed out already 4 Boxes and I am very happy about them! Just rised feet to fit bigger Silicagel Boxes or Drybags under the spools. Mine are Hysure 400 and…

Wydruk około 3,48 €–4,26 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
185
Polubienia
25
Ocena
5
P
PrintablesSica

Towel Hook for horizontal radiator (bathroom)

My wife bought a set of 4 towel hooks for the bathroom radiator, but their grip was awful and every time we picked the towel would grab the hook also and fell on the floor. Pretty noisy in the middle of the night. Also after a few falls…

Wydruk około 1,03 €–1,25 € nettoWstępna wycena jednego wariantu

Pobrania
178
Polubienia
22
Ocena
5
P
PrintablesEcoDad

Waterslide Dice Tower

Rolling dice are meant to be seen - this waterslide dice tower lets you watch the dice slide, down and roll on the bumps. The original version v6 is a true slide and the dice usually do not roll at the end. The latest version v7 is easier…

Wydruk około 5,33 €–6,51 € nettoWstępna wycena jednego wariantu

Pobrania
177
Polubienia
45
Ocena
0
P
PrintablesThaix03

Paper Towel Holder

Here you can see my design of a paper towel holder. If you have any questions or suggestions for improvement, feel free to contact me. Model dimensions(d x h): 125mm x 200mm Printing Instruction On the bottom oft the print, I would use…

Wydruk około 10,09 €–12,33 € nettoWstępna wycena jednego wariantu

Pobrania
167
Polubienia
40
Ocena
5
P
PrintablesCelta

Customizable Extrusion Multiplier Test Tower (Fast)

This remix of the Extrusion Multiplier Test Tower allows for more flexible calibration. Each level is labelled 1-10, enabling you to experiment with a wider range of extrusion multiplier settings. Fine-tune your printer's performance with…

Wydruk około 0,37 €–0,45 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
159
Polubienia
8
Ocena
5
P
PrintablesRobertusMaximus

The Air Handler System - Tower - Wargame Terrain

The Air Handler System - Tower - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have become…

Wydruk około 2,47 €–3,02 € nettoWstępna wycena jednego wariantu

Pobrania
159
Polubienia
57
Ocena
0
P
PrintablesFrankTheTank908

Hatchbox ABS Temp Tower MK3/s Gcode

Original didn't provide Gcode. This is for people that just want to download and print without knowing how to change Temps. This is the right thing for you. I did not create this model, I changed all the temps to be ready to print. Enjoy

Wydruk około 0,62 €–0,76 € nettoWstępna wycena jednego wariantu

Pobrania
157
Polubienia
3
Ocena
0
P
PrintablesD3andr0

Eiffel Tower

A simpel but beautiful Eiffel tower

Wydruk około 2,70 €–3,30 € nettoWstępna wycena jednego wariantu

Pobrania
149
Polubienia
3
Ocena
0
P
Printableschaosmatic

Toilet Paper or hand towel Shelf Deluxe 42069

This has been what I needed for so long and I had yet to find one. Here it is, the final piece of the bathroom practicality puzzle. 3mf file made in PrusaSlicer with supports. Install with either double sided tape or 2 flathead screws for…

Wydruk około 15,05 €–18,39 € nettoWstępna wycena jednego wariantu

Pobrania
148
Polubienia
27
Ocena
5
P
PrintablesBobes

Citroen Towbar cover, hook cap, krytka tažného zařízení

Krytka tažného zařízení. Towing device cover

Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu

Pobrania
134
Polubienia
9
Ocena
5
P
PrintablesWolvie

Self-watering Flower Pot / Vase Castle Tower

I remodeled a Self-watering Flower Pot / Vase Castle Tower for everyone, who need a cool Flower Pot or Vase :-) I took and remodeled one original model by Phat3R from Printables and made it into a functional Self-watering Flower Pot /…

Wydruk około 0,35 €–0,43 € nettoWstępna wycena jednego wariantu

Pobrania
134
Polubienia
25
Ocena
0
P
Printables3DHippo

Papertowel Holder

This should fit the standard European papertowels. I dont know if the dimensions are different in other continents. I have yet to print it, will update it. Update: It works, the screws are a bit tight, but it works. If you love this…

Wydruk około 3,36 €–4,11 € nettoWstępna wycena jednego wariantu

Pobrania
130
Polubienia
7
Ocena
3
P
PrintablesRobertusMaximus

Container V Hightower

Container V Hightower In the deep darkness of the space in between, where things that defy the imagination lurk, was where the Container V was born. Used along with the Container V Hightower, a fearful overwatch platform for fighting was…

Wydruk około 1,70 €–2,08 € nettoWstępna wycena jednego wariantu

Pobrania
118
Polubienia
25
Ocena
0
P
PrintablesLukas Le Roux

tvin towers

it was my school project

Wydruk około 7,95 €–9,72 € nettoWstępna wycena jednego wariantu

Pobrania
113
Polubienia
6
Ocena
0
P
PrintablesPaultier02

Tower Organizer Tray

A modular tower designed to hold stackable boxes for efficient storage and organization. Each box fits snugly into the tower, allowing easy insertion and removal. Perfect for organizing tools, stationery, or small items. The tower is…

Wydruk około 4,10 €–5,01 € nettoWstępna wycena jednego wariantu

Pobrania
110
Polubienia
25
Ocena
0
P
PrintablesPantovarnikCZ

Clip for hanging towels

Clip for hanging towels, hole diameter 17 mm. / Spona na zavěšení ručníků, průměr otvoru 17 mm.

Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu

Pobrania
108
Polubienia
14
Ocena
0
P
PrintablesOčko

Radiator_CZ_Korado hooks for towel rail

Print on Pet, dimensions adjusted for Czech Korado radiators.

Wydruk około 2,18 €–2,66 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
108
Polubienia
16
Ocena
4,67
P
Printablesnevim

Holder for towel (it cannot be accidentally taken off)

Easy to print holder for towel. Use PETG so it is stronger, but PLA is also possible to use. Brim is not necessary but if its not holding on the plate then use brim. Use 0.20 layer hight with 25% infil and 2 perimeterrs. Here is video on…

Wydruk około 0,75 €–0,91 € nettoWstępna wycena jednego wariantu

Pobrania
98
Polubienia
18
Ocena
5
P
Printablesimaginarypie

Dragon head dice tower

loved the original model and wanted to make it a tower for DND

Wydruk około 14,24 €–17,40 € nettoWstępna wycena jednego wariantu

Pobrania
97
Polubienia
14
Ocena
0
P
PrintablesFrankyD80

hook for towel heater / toweldryer / towelhook for bathroomheater

This hook is designed to fit the bathroomheater (eg. Badheizkörper Schulte München rund 1215x500 mm weiß mit Mittelanschluß) with a piperadius of 11mm (d=22mm) and a pipedistance of 42mm. The dimensoins of the hook are designed as 23mm…

Wydruk około 0,48 €–0,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
96
Polubienia
14
Ocena
5
P
PrintablesAdudino

Dice Tower - Building & Balancing Game

Description The game challenges players to stack dice to form a tower, offering fun for both children and adults. 21 (or more if you print more for harder challenge) dice are evenly distributed, and players take turns rolling no more than…

Wydruk około 8,37 €–10,23 € nettoWstępna wycena jednego wariantu

Pobrania
91
Polubienia
36
Ocena
5
P
PrintablesLazlo

Monkey Totem Desk Lamp (Bloons Tower Defense 6)

3 identical monky cylinders that slide onto a large cylinder that diffuses light from a wound up neopixel/LED strip. If you don't know what this is it's from btd6. IMPORTANT: You will have to find a way to light this thing yourself. I…

Wydruk około 1,04 €–1,27 € nettoWstępna wycena jednego wariantu

Pobrania
89
Polubienia
35
Ocena
5
P
PrintablesWim V

Towel Clamp with Loop (using TULAS)

2nd example with the use of TULAS. The flexible loop connection is made with a few cm's of TPU filament. V2 is clamping better. For more info on TULAS, how to connect the filament and how to use it with your own models: TULAS: the…

Wydruk około 0,17 €–0,20 € nettoWstępna wycena jednego wariantu

Pobrania
84
Polubienia
37
Ocena
5
P
Printablestobster

OctoWatch (kids toy)

Eine OctoWatch für Kinder, bekannt aus der Serie Oktonauten. (Kindliche) Fans der Serie können damit fantasievoll ihre Helden rufen. Es wird ein NATO-Style Armband benötigt. Beim Druck kann das Filament gewechselt werden, damit das Symbol…

Wydruk około 0,96 €–1,17 € nettoWstępna wycena jednego wariantu

Pobrania
79
Polubienia
6
Ocena
5
P
PrintablesSanyi

Spirit island town with windows and doors (remixed)

Town token in Spirit Island board game.

Wydruk około 0,09 €–0,11 € nettoWstępna wycena jednego wariantu

Pobrania
77
Polubienia
12
Ocena
5
P
PrintablesAlejandro

Crocodile Clip multitool for towels or anything

This crocodile-shaped clip allows you to hold towels or whatever you need. The gear slides along the tail making the crocodile's "mouth" squeeze harder. The clip allows you to stick the crocodile in the sand. The crocodile's tail also…

Wydruk około 2,98 €–3,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
77
Polubienia
23
Ocena
0
P
Printablespaw3D

Calitower Z - An addition to the open source Calistar

Introduction Just as Calistar , Calitower Z is a free, open source, and parametric tool used to adjust a 3D printer's dimensional accuracy. While Calistar calibrates the x- and y-axis, Calitower Z sets out to do exactly that, just for the…

Wydruk około 1,40 €–1,71 € nettoWstępna wycena jednego wariantu

Pobrania
74
Polubienia
19
Ocena
0
P
Printablesjankaspar

MN82s RC Tow Hitch

Tow Hitch for RC model MN82s and MN82.

Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
72
Polubienia
6
Ocena
0

Rotatable Towel Holder hooks

Simple Rotatable towel hooks, could be fixed with simple nails or screws, no supports required

Wydruk około 0,91 €–1,12 € nettoWstępna wycena jednego wariantu

Pobrania
72
Polubienia
26
Ocena
0
P
PrintablesArt G

Fun Bathroom Fixtures - Towel Bar & Toilet Paper Holder - from plumbers fittings

Assembly is easy just screw the parts together after applying a liberal amount of strong glue. The pipes (nipples) are reinforced but the fittings can't be so use the glued joints to add strength. Can be reconfigured into shelf units,…

Wydruk około 1,19 €–1,46 € nettoWstępna wycena jednego wariantu

Pobrania
70
Polubienia
35
Ocena
0
P
Printablesgillis

Towbar Smiley :-)

The towbar cap with a smiley. You have to fill in the smiley, with a acrylic pen/paint, yourself. Now, a towbar should be 50mm in diameter, however when I tried on different cars there were some tiny differences. Therefore I have included…

Wydruk około 0,32 €–0,39 € nettoWstępna wycena jednego wariantu

Pobrania
65
Polubienia
8
Ocena
5
P
PrintablesCraftMeng

Paper towel holder - one-handed use and reload

A simple paper towel holder that is made of three 3d printed parts and a rubber band. Can be used with paper rolls of any length. One-handed use and reload. Parts can be secured with double sided tape or screws. Just attach a rubber band…

Wydruk około 8,12 €–9,92 € nettoWstępna wycena jednego wariantu

Pobrania
63
Polubienia
18
Ocena
0
P
PrintablesMrRogers

Ratcheting Paper Towel Holder

Not-so-simple ratcheting paper towel roll holder! With optional guide arm! Print either the ROLL_BASE_NOTCHED if you want guide and ROLL_BASE_SOLID if you don't want the guide arm. I've also included a TABLE_GRIP that can be added to any…

Wydruk około 3,04 €–3,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
54
Polubienia
5
Ocena
4
P
Printables3D'ci

Twin Towers Fish Tank Ornament

ı designed looks like twin towers fish tank ornament and pretty good design ı think.

Wydruk około 22,29 €–27,25 € nettoWstępna wycena jednego wariantu

Pobrania
53
Polubienia
5
Ocena
0
P
Printables3DFW

MagnoWrap Rook Chess Tower – Flexible Magnetic Chess Board with Storage

The MagnoWrap Rook is a unique 3D-printable chess set that blends creativity, flexibility, and functionality. Wrap the flexible magnetic chess board around a majestic rook-shaped tower that doubles as a piece storage container. It’s part…

Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu

Pobrania
52
Polubienia
30
Ocena
0
P
PrintablesRamingoDesign

Temp Tower MK3S+ MMU3 Nozzle 0.6

preset GCODE for 0.6 mmu3 on prusa i3mk3s+ PETG Prusament

Wydruk około 1,97 €–2,41 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
49
Polubienia
2
Ocena
0