199 modeli
My wife wanted a toy hanger for the Newborn seat. I made a model in SolidWorks based on pictures from the original one. Because it is too large to fit on the printbed I bend the model untill it fit the build volume. Afterwards I heated it…
Printing Settings Infill Density: 20-30% Layer Height Standard 0.2 mm Wall Count 2-3 Material PLA Fan Speed 100% Print Speed 50 m/s Upload makes/comments
How often did my Roborock bump sensor-first at the Tripp Trapp bar? too often… The bar at this chair is perfectly aligned to avoid the touch sensor but to crash the optical one… well thank you. So here is a clip / lock on cube to be…
P-Hive Pollen Trap Description A modular pollen trap, 100% 3D printable, designed for P-Hive beehives and easily customizable to meet the needs of every beekeeper. This pollen trap has been designed as an accessory specifically for P-Hive…
Il faut imprimer la trappe coulisse vers le haut. Pas besoin de support mais il faudra bien gratter les coins pour un bon ajustement. La partie OPEN est fournie dans un fichier SVG annexe. Pour le mettre en place utilisez clic droit sur…
https://www.buymeacoffee.com/maxt ---------------------- UPDATE 22nd Mar 2023 : The model has been updated to v4. A complete rework based on Tripp Trapp Trofast Clip (metal basket) . That model gave me the idea, that it's much better to…
Tripp Trapp adapter for IKEA TROFAST Mesh storage box. I tested with the french product ( https://www.ikea.com/fr/fr/p/trofast-boite-de-rangement-en-filet-gris-fonce-60518453 ) but it should work with one from any country. The dimensions…
The clip is being used to mount an IKEA TROFAST (42x30x10cm) metal basket to a Tripp Trapp. The clip will not work with the TROFAST plastic bins. I have the 4th Generation Tripp trapp at home. I think it should also fit on the 3rd…
Here is my design of the board game "Le Passe Trappe" (also known as Flitzpuck). It's a fast and addictive game for two players. The print contains all required parts, the only extra hardware needed is a rubber band (I've used a hair…
The original adapter by @MaxT has a very tight fit on my two Tripp Trapp Stokke chairs from 2020 and 2015 with IKEA Trofast plastic storage boxes from 2024. This remix adds a total of 3mm of extra width (1.5mm on each side) compared to…
Deutsch: Wenn eine Wespe kommt und sieht das fremde Nest, dann verzieht sie sich in der Meinung, dass da schon ein Wespenvolk angesiedelt ist. (So ist zumindest der Werbespruch). Skalieren Sie wie gewünscht, ich druckte es mit 90%. Nutzen…
I used PETG but you may be able to get away with PLA
I love the (reusable) cable ties and print them out in different sizes all the time. This is another remix from cable ties . They are flexible, made for using TPU or PP! Now, on PrusaPrinters 3D Contest “Cable Organizers” I thought I make…
Couldn't get the orginal (https://www.thingiverse.com/thing:3336214) to fit on any available feet. Remixed it to fit these feet (https://www.prusaprinters.org/prints/120019-tripp-trappr-stokke-back-feet)
Adapter to attach baby set to old Tripp Trapps with 75mm bracket
V2 is 0,3 mm wider than the orgin version, that equals about 2%
The clip is being used to mount an IKEA TROFAST (42x30x10cm) plastic bin to a Tripp Trapp. The clip will not work with the TROFAST metal basket. (Please see my other model for that) I have the 4th Generation Tripp trapp at home. I think…
A 3D-printable storage box, compatible with the Tripp Trapp® chair and Tripp Trapp® Baby Set. Designed as a single piece for easy printing on your Prusa Mini+, this box offers a convenient solution to keep your child's essentials neatly…
Remix of Tripp Trapp Trofast Clip with slimer rails for my new Trofast with 6.8mm rim height. Rails are now 7mm high. For other side just mirror model in PrusaSlicer. PLA 0.6 Nozzle 0.2 Layer (Variable Height) 0% Infill Support on build…
Snail trap I created these traps to protect the grains of poison from the rain, because if they get wet they melt and pollute the soil. I have drawn many variant in size and form. The most practical version in my opinion consists of:…
A convenient receptacle capable of trapping and containing pesky purge lines, skirts, ooze or other printing scrap. If you have been printing for a while, you know that those scraps--especially skirt loops--hate to be contained in small…
I remixed Ampallang's design to fit my old design Stokke Tripp Trapp chair. Use at own risk. It might be necessary to rework the countersink in order to not scratch your floor with the screw head.
My son fell several times from the chair. I, therefore, designed these armrests. In addition to functioning as armrests, they work great as handles when the child is climbing on the seat. Also, when you move the seat close to the table,…
There are some models for the exact purpose available already. I modeled these ones with a few tweaks compared to the existing ons. They are more snug. They sit more snug in the leg of the chair and are not as easy to be unhooked from the…
I remixed this model ( https://www.printables.com/model/85552-stokke-tripp-trapp-back-hook ) to create a slightly thinner hook. And I also added a version with a slightly different hook shape. I used PETG but you may be able to print it…
These backfeet are suitable with my uploaded extended slider. You will need this with the Tripp Trapp newborn set.
Used solder to mold the contours of the tray and chair sides, took a picture on graph paper and set as canvas in Fusion 360. Sketched over it and extruded a solid to make the part. Its a simple quick print, printed on my SV06 with…
This simple adapter can be mounted to older Stokkes Tripp Trapp baby chairs fabricated until 2013. This allows to mount the extended gliders, which are needed to increase safety. The factory gliders for the older chairs are currently out…
I designed a front foot for my used '12 Stokke Tripp Trapp chair. The front edge was a little bit worn, so I wanted to cover and protect it. It fits snug without a screw or adhesive. Maybe you need to cut a little off the front cylinder…
This is a 6 elix trapezoidal thread screw, it's pretty fun to play with and shows the capabilities of 3d printing. It can also be used to test out your printer calibration on thight tolerance. There are three files, they differs on the…
This is a script that generates models of the star and planets in a planetary system; I've used it to generate models for our solar system and for TRAPPIST-1, a system with many earth-like planets around a much smaller star. These models…
Remix for the back foot. Fits both sides. It has the indent so the extension can snap in and hold it in place Category: Household
When using baking soda to deodorize a refrigerator or freezer, we always used to just tear off part of the baking soda box. When you think about it, this doesn't really expose much of the baking soda's surface area to the air, so it's…
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
This is a simple anchor system for cosplay. Glue it on your foam parts and you will have anchors to attach to with strapping. https://youtu.be/TRYj5IIAX5Q Category: Costume
These Extensions replace the factory feet of the Stokke Tripp Trapp high chair. I have the old version, no idea if they fit the new chairs. The Extensions prevent the chair from tripping over backwards if the kid pushes hard. Having the…
Eine Trüffelattrappe für das Hundetraining. Schraubbar, um innen mit z.B. echtem Trüffel aus B-Ware oder mit Trüffelöl getränkter Watte den Geruch herzustellen. Dazu Löcher um den Geruch nach außen zu lassen. Die beiden Teile sind in der…
Arch for stokke tripp trapp, print preferably with PETG and glue the two parts together.
Mushroom-shaped variant of my slug trap, in various sizes and in a lightened version to save filament. The various versions of the Top are grouped in the zip file. The base and the various pins can be found in the original model, here I…
My take on the trapped ball object. Prints without supports as long as your printer can handle 20mm bridges.
Mirror version so it fits on the left side.
Halterungen um den 5-Punkt-Sicherheitsgurt von Stokke am Tripp Trapp befestigen zu können. Montage erfolgt wie beim Original. Wurde 3D-Druck-freundlich konstruiert: Möglichst wenig Überhänge und integrierte Supports. Gedruckt mit vier Top…
This is an adapter to fit extended gliders on the back feet of a Stokke Tripp Trapp chair. The locking mechanism was inspired from the great design by JonsBronnu ( https://www.thingiverse.com/thing:1429208 ). The main difference is that…
Are you tired of mice eating all of your cheese?! Then it’s time for you to step up your mouse catching skills using our humane mouse trap printed with your own 3D printer! Simply print, assemble, add a bait and catch & release using our…
Print it 100% infill, lowest layerheight possible. Screw nut into hole to create threads or use tapping tool and 5mm tapp.
This hinge uses a joint design that's unique to additive manufacturing, you couldn't make a hinge like this any other way. It's also sized to fit nicely on a 20XX-style extrusion so the pivot point is right next to the outer edge of the…
This is the nevermore micro V4 adapted for the Prometheus MSLA. We simply replace the Voron logo by the contrapposto shop. This is not our design. You can find all the info, instructions and original STLs from…
Love Medical Barrier Film, but hate having it take up space on your desk? Me too! Designed this for the 4” x 6” perforated sheet rolls. This wall mount is designed to have a friction-set dust cover and is usable in either orientation.…
M.A.S.H - Captain John Francis Xavier Trapper McIntyre - 1972-1983
TrappCaddy is a full-width snap-in storage bin designed to mount behind the backrest of the Stokke Tripp Trapp chair . After seeing other printable versions that didn’t fully convince me, I designed TrappCaddy to use the entire width of…
This glasses case prints in place and uses trapped hinges. It also has spaces for 3x1mm neodymium magnets for a closure system. I recommend turning on support to make sure there is no sagging on the bottom of the hinges, but check your…
Name: Fidget Elevator: a mechanical curio curiously without compliant parts Video: https://youtu.be/ji-E1huV4Js Printing Instructions: https://koolfingers.com/3d-prints/printing-elevators/ Ask anyone playing with a Fidget Elevator for the…
Traps for the Trapper class that use 8 mm dice to display the numerical value of a trap. Recommended printing colors: damage traps: red heal traps: blue
I needed a backpack mounted AirTag that was a little more sturdy than most I've found. This one uses M3 screws and nuts to hold it in place.
We made these 30/xx mm mockups as a cheap replacement for different lock cylinders for environments with low safety requirement like garden gates and others where you not neccessarily NEED a lock but don‘t want to see an eye-catching hole…
Tired of not knowing where to put your Stokke Tripp Trapp tray when it’s not in use? Meet the TrayDock for Tripp Trapp — a pair of smart, spring-loaded clips that let you neatly store the tray behind the chair’s backrest, always within…
An optimized handle that prevents water being trapped between the lid and handle. It needs to be attached with a brass insert nut. The hole for the M5 screw in thehandle is 11mm deep.
Stokke sells for their Tripp Trapp high chair Extended Gliders for more stability. They are recommended by Stokke when using the Baby and Newborn Sets and are also helpful to prevent the chair from tripping over backwards when the child…
Lost one of my extended gliders that came with Stokke newborn seat for my tripp trapp chair. This is a quick and dirty model which does the same as the original one.
This adapter turns your IKEA Trofast mesh basket into a drawer for your Strokke Tripp Trapp high chair. The adapter clips to the inside of the high chair leg and provides a slot for the rails of the basket to slide in. This model was made…
One of the first things I made to print on a 3D printer because it's something only a 3D printer can make. The middle nut will spin after all the supports are removed. I've uploaded the SolidWorks part files for this so you can edit as…
Here's my proxy model for the Trapping Unit! The original artwork is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-trapping-unit-front.png ; as you can see, I made some changes…
A classic assembly puzzle where you have to trap a ping-pong ball between these frames. Requires a standard (40 mm diameter) ping-pong ball. Note: You shouldn't resize the pieces in any way, because they may not fit properly if you do. I…
The Trapper's traps in Frosthaven can have many different effects. These magnetically connecting traps should help with that. The base rotates to indicate the heal/damage value and you can stack as many status effect hands on top as you…
Bonjour, voici un fichier complet pour la trappe d'accès au phare pour BMW E90 et surement d'autres modèles. La trappe ce situe dans le pare-boue. Trappe avec sa "vis" permettant de bloquer la trappe La "vis" est aussi compatible avec les…
An ear-flaps ‘trapper hat’ for our little robot pal Lucky 13. Something to help keep his positronic brain warm on cold winter nights.
Foot extender for older model Stokke Tripp Trapp high chairs. Helps to prevent tipping the chair over. Use at your own risk! Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm Infill: 50%…
Printed using generic PETG with 0.4 nozzle, 0.2 layer height, 15% infill, 3 perimeters. Snaps-on for a very snug and secure fit. Requires considerable force to snap off. Used for stokke harness project with tri-glides, 18 mm webbing and 5…
The idea. I was looking for a safe, strong and flexible solution to attach something to a dog's collar. Soon I thought of the silicone rings on the ends of objects as they are often used. On my desk was a sample of TPU filament (I had…
I was looking for a reliable finger strapping solution to practice Judo. Objective being to prevent lateral movements of the finger (e.g. in case of strain) while still being able to properly grab, grip and eventually throw opponents. The…
slides onto plastic foot. Print instructions printed in PLA, 0.2mm layer thickness. fits in our case and does its job.
petg 100% 0.20 avec support recouper une petite partie du fuselage (voir photo) ce monte et ce demonte avec les 4 vis du train
Minis for Hal and Alena Magic the Gathering's Lesbians from Innistrad Both were quoted frequently in Flavor text of cards in the First Innistrad Block. They showed up in the story of the Second Innistrad Block and were confirmed as a…
Fits up to a 32mm (1.25") wide strap. I use M3 screws and heat-set inserts to attach the handle. Don't use screws that are too long and protrude through the other side of the spool. Stick the tag end of the strap through the center slot…
I wanted to try creating an object with multiple object trapped within one another so I made this. Category: Sculptures
Uploading my "back catalog" to Prusa Printers! Hope you enjoy this design from 2015: Designed the Strappy Key Chain using Flex (98A) material after seeing the Orbitkey (orbitkey.com) Full Parts List & DIY Instructions at:…
A replacement brace for the Stokke Tripp Trapp Need to be glued together, due to small printbeds. A better version is currently being designed.
This is a simple nut that's trapped on a double headed bolt. I designed this in Fusion 360 with a 0.5-0.6mm tolerance. I included a small test part and both F3D files along with the actual trapped nut STL file. Print Settings Printer:…
A Funko Pop of Evan MacMillan from Dead by Daylight.
I couldn't get the original hinges to stay in tact. A user Chris Huck posted pictures of their hinges that they created as a work around. All I did was try to replicate that photo. Still a novice at design but it has been working for me…
Discover the fascination of an impossible object with this Trapped Sphere in a Cube Fidget. This model is designed as a seamless print-in-place mechanical illusion. It rotates smoothly in all directions. Perfect as a desk toy, stress…
A cover for the hole left in the old version of the Stokke Tripp Trapp highchair when the safety bar is not in use
Introducing the Tripp Trapp® Floor Glider Set , a custom 3D-printed solution designed to replace the original floor gliders of your Tripp Trapp® chair. This model has been meticulously modified to fit snugly into the existing holes using…
Just the body and the Encoder cap. I also threw in a Logo front plate. Front plate was printed with 0.2 nozzle to come out nice. Get the rest of the parts from the original. Update: I managed to damage the USB port on my t114 so I made a…
Just a bit of fun Category: Other
Strapping for standard size mason jar (70mm cover size) Printed in PLA The handle is a piece of TPU filament Print Settings Printer: Artillery Sidewinder X1 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament: BasicFil PLA Black…
Here on this Thingiverse page you will find yourself a very customizable trapped sphere. Use Customizer or download the SCAD file to customize the cube size, hole sizes, and sphere size. Please comment if you have any questions or…
Maybe you won’t be the coolest… but you’ll still have a nice print at home!
Cap for the safety bar hole of the old version of a Stokke Tripp Trapp chair. You may need to wind some tape around it for a tight fit. The holes have quite some tolerance. Printing: Layer height: 0.15mm Infill: 20% Orientation: same as STL
My settings were: 0.6 Nozzle 3 wall loops 13% infill Gyroid infill Supports: Build plate only (Normal grid) No brim Normal supports for the inner parts where the trofast box slides in. Not needed for the bumps i added, atleast on my A1…
Foot for tripp trapp kid chair
Tolerances are tight by design to ensure a snug, wobble-free fit. You will need to apply a firm push to put it into place. ### Recommended Print Settings * Material: PETG recommended (provides the required flexibility and impact…
This is a revision of the impossible trapped box paired with my maker cube test model. Still functions as a test model with bridging, sharp overhangs, and a small first layer contact patch. This mild torture test will push the limits of…
Printer : i3 MK3 Rafts : No Supports : Yes Resolution : 0.20 Infill : 20% Filament Material : PLA
Replacement feet for Stokke Tripp Trapp Attach a self-adhesive felt glider (3mm plus thickness) cut to fit the cutout in the printed part to prevent scratching the floor Autodesk Fusion file included.
Just a fake behive that is suppose to scare of bees
Do you have a baby? Do you have a STOKKE Tripp Trapp? Do you have the STOKKE baby seat? Toddler is freaking out at the peaceful family dinner? Then THIS is what you need in life. Attach the bracket to the babys chair put on a freaky…
Fits up to a 45mm (1.77") wide strap. (This is a remix of my 32mm version with other changes besides just size.) I use 5mm M3 screws and and 3mm heat-set inserts to attach the handle. Don't use screws that are too long and protrude…
![Terry the Tattoo Tape Trapper [barrier film dispenser]](https://media.printables.com/media/prints/486542/images/3972411_d87b06e7-461d-48ee-9994-7b7f7eb9bcc2/terry4.jpg)
