256 modeli
Sue wanted a hanging pot that would let her climbing plants climb. This design has three pieces and can be scaled for your printer / plants. The parts are designed to print without supports/rafts. The top ring and bottom pot have nine…
Wydruk około 2,25 €–2,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you have brambles, raspberries, rose bushes or even grapevines in your garden, you need to attach them onto a trellis to manage their shoot's growth. Especially blackberries can be very nasty and hard to control when trying to tie it…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi, this project consists of 3 files for separate printing. You can see the dimensions of the plant support in the graphic below. All 3 parts together gives you 375mm support + 100mm that goes in the ground. This plant support is modular,…
Hi, I present you an improved version of my previous project! This support consists of 3 files for separate printing. You can see the dimensions of the plant support in the graphic below. All 3 parts together gives you 375mm support +…
Plant supports in different sizes and shapes. Scale the models according to the size of your print bed or the size of your plants. The plant supports can also be cut from MDF or other materials with a laser cutter. (pdf for laser cutter)
Needed to hold up my plant as it was growing. Modeled this to be modular, can get bigger, wider, whatever. No supports are needed. Print the spikes vertically, unless you have a super sticky print surface, print them with wide brim.…
Plant support Print instructions support_1pc_base2pcs-honeycomb.3mf - need to glue after printing.
Printed with wooden PLA
I liked the idea behind this model , but wanted a more sturdy construction that did not involve glue (am not a patient man). So, with a bit of Fusion 360 work, here's this nice trellis that can grow as needed. No glue required, but pieces…
Stackable trellis for plants. Stack as many as you need on top of each other to make it taller. It was sized to fit an ender 3 build plate (220x220mm) diagonally. Scale up or down to whatever size you need or to fit your build plate. No…
A friend asked me to create a nice hexagonal trellis for their indoor plants to climb, so naturally I made a bunch of goofy designs! Nothing fancy, scale them as large as you want, or as large as your print bed allows. If you want to make…
LoZ Master Sword Plant Trellis 100% prints at approx. 7in tall, 0.2in thick. To create a larger (or smaller) trellis you can scale in the x-y while keeping the z-scale the same (as to avoid making it too thick or thin. No support or…
A very simple plant trellis to support the growth of your climbing green companions! It prints in three parts (all in same plate in the provided 3mf file), to maximize the size of the circles. Dead simple to assemble. The distance between…
A stackable plant trellis! Prints flat, then links together into “floors” of 3 or 4 (or more?). Stack as high as you care! Fully parameterized for Inventor users, or use one of the 4 basic sizes. STEP files included as well. STLs have…
Click here to see collection containing more gardening related designs by 3D Printing Bug. Enhance your plants with these stylish and functional 3D printable trellises ! Designed to support climbing plants and vines, these trellises add…
If you like my work and enjoy my models please consider leaving me a tip/donation, It helps me to continue creating awesome models for you for free. https://paypal.me/muddymaker You can use these clips in conjunction with a trellis string…
Plant grid in Voronoi style for Aquariums. Size ist 180 mm high, 80 mm wide.
This is just a simple small plant trellis. There are two models, one with a bee and one without.
Simple clip to hang on a wire to support tomato plants, vine branches or any plants that need to be guided or supported Designed for an opening of approximately 15mm, this clip has a flattened side to be placed on the bed to avoid adding…
Just a quick hanger/clip for grow tent poles (16mm, most common size). Works well for trellis support, and LST anchoring. Recommend adjusting print height and fill based on strength needs (whatever you're tying down / supporting) These…
With the last blue moon of the year passing, I designed a support trellis for indoor plants depicting the moon and its phases. Suitable for use to help support growing plants or ivy in any planter. Drew this up and imported as SVG into…
I wanted a Valentines themed plant trellis for some 4-6" houseplants and what better for life than a human heart! No supports, chunky layers and big nozzles print it fine too.
Stackable trellis for AeroGarden Bounty to add support for taller plants. The trellis is compatible with the trellis system that comes with the AeroGarden Bounty. The trellis frame needs to be printed in two parts, which can be clicked in…
Peeking Cat Plant Trellis About 7" tall when printed at 100% (0.2" thick). If desired to be larger/smaller, scale in the x/y and keep the z scale the same to maintain thickness. Pictured: Cookie CAD Black PLA, no support, no adhesion, 20%…
Hexagon Plant Trellis. The connector nubs on my printer were a bit too tight. I heated the inside up with a soldering iron and pushed them onto the legs to resize them for a snug fit. Mounted on the wall with two small nails on the inside…
Happy DNA Day 2026! This is a trellis/support I designed for house plants, inspired by the DNA double helical motif. The STL included has a 9cm external diameter and should be able to fit on most printers (such as your typical Prusa bed…
This modular trellis is the perfect for any indoor plants. Made up of four different types of pieces, you can keep printing and adding on as your plant grows! The pieces will most likely need some sanding if the supports get a little…
UPDATE: Added an easier print version added in response to a fellow members printing issues. The Easy Print version has a straight 45 deg corner bevel in the handle cutouts as opposed to a radius. Simple stackable storage box in the style…
0.2" thickness. Printed with wood PLA. No support or adhesion needed. 7" version fit on my Ender 3 V2 bed at 100% when rotated as shown in photo.
Set of 10 Trellis for your house plants Easy to Print All Trellis are 2mm thick
This is completely inspired by uCkeN's modular hexagon plant trellis , but designed from scratch with some changes to the feet/connectors: Available in single, double, and triple corner varieties. Includes varieties that have a hole…
This is a simple ground/dirt anchor for vertical trellis vegetable stringing (in my case, tomatoes). Simply tie your string around the knob at the top, then screw the anchor into place near the base of your tomato plant (trying to avoid…
The inner bracket ring of the lampshade measures 40mm, which should be compatible with most standard hanging E26 light bulb sockets. The lampshade measures roughly 150mm in diameter and 175mm tall. This should print perfectly without…
This is a rather large trellis designed to let plants like String of Hearts (Ceropegia woodii) grow against. I got my inspiration from the picture on the cover while reading this article on the LeafyPlace.com website. When I searched for…
This is a nice simple plant trellis. Scale to size, if the size you need is too big for you build plate, what I did was; I split it with Prusa slicer (as seen on pic) so it fits on my Ender 3. No supports then just glued together. Easy!
Short trellis (1 piece) Total height: 17.7 cm Width: 7.4 cm Thickness: 0.5 cm Long trellis (1 piece) Total height: 26.2 cm Width: 7.4 cm Thickness: 0.5 cm In case you want to print the pieces separately, download the files: top, bottom…
A minimalist yet decorative indoor trellis designed to support climbing plants like snap peas, beans, or vines. I wanted something functional but also aesthetically pleasing. I think this trellis hits the sweet spot between functionality…
This botanically themed trellis can be used in two different ways – either flat, or rolled into a tube. The Flat version is 1mm thick, but can be scales in the Z direction if you want it stiffer. The Rolled version is 0.6mm thick,…
Small pot plant trellis suitable for indoor climbers Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: .30 Infill: 15% Filament: Pursament PETG Signal White Category: Outdoor & Garden
Support for plants. Plant Trellis. Total length 25 cm.
Just in time for Halloween, here's a skeleton hand trellis to give your plants some spooky support. I printed this on my Ender 3 Pro in white Overture PLA at a .2 mm layer height with a .4 mm nozzle. If you like it, and feel generous, you…
Bigger Trellis prints just under 2 Hrs. or smaller in 1.5 Hr printed trellis
Requires supports on the “spike” parts at the bottom of the model, but otherwise not too complicated to print. If you print multiple then you can slide them together easily to get extra height. Total model dimensions are 205mm from the…
**See new modular version https://www.printables.com/model/512560-modular-plant-trellis-coupler Initial version 130w x 199h mm plant trellis, can link 3 or 4 together. Coupler allows them to stack
My model is modular so you can print more layers and stack them to make it taller.
Give your climbing plants a royal home! This modular, Gothic-inspired trellis tower is perfect for vines, ivy, pothos, or any creeping houseplant. Unlike boring standard plant supports, this tower acts as a beautiful piece of decor. The…
This is a trellis that can be scaled to any size to suit for supporting potted plants. At 100% scale it measures approximately 273x197x4 mm My wife requested I design this for her as the store bought ones either rot out quickly or are too…
Simple honeycomb style trellis for use in small plants to give some support. Should be able to print flat, just scale to your desired size and get printing. Category: Outdoor & Garden
Here comes a simple design for room plants to give them a structure for growing. Beneath the structure for climbing it could also be used for decorating a bunch of flowers. Please follow the short instruction below. Instructions Scale the…
Rebar trellis are quite popular as plant supports, so I decided to make my own version with the help of my Prusa Mini+. The set consists of connections designed to work with 13 mm rebar. The fit is quite snug, but for the T-3way and the…
This fun plant trellis was printed on its side. Supports are really only needed for the two feet that are hanging out in mid air. You can weave your vining or climbing plant through it. Printed at 100% for strength. No need to tie your…
Support for plants. Plant Trellis. Butterfly.
Based on two growing seasons experience with this design, I strongly recommend printing this with TPU or another Flex filament. This script uses the customizer to create joints for a bamboo garden trellis or plant cage Customizer is…
An adorable heart loop houseplant trellis for a small pothos or any houseplant!
Circular trellis for climbing plants Dimensions: Approx 250mm x 116mm x 5mm Printed with: Bambu PLA Basic
Introducing… The Folding Grow Pole and Trellis, designed by your's truly! One of the biggest drawbacks of using 3D printed parts is the fact that they are anisotropic; they are weaker when force is applied across the layer lines of a…
A small trellis for plants that can be stacked. Use a twist-tie, string, or zip tie through the small holes to join one trellis stacked to the next. Support touching the build plate required for the stakes. No support necessary for the…
Andrew Shilliday's trellis design is lovely, but needed a structural boost. So, I imported the model into TinkerCAD, extruded it out to 6mm, doubling the thickness, shrunk the footprint to fit a mortal 3D printer, and exported it back…
.3 25% Infill 3 walls TPOIMNS PETG
I couldn't resist printing @Thanh3D ‘s adorable oddish planter. But if you’re a plant lover like me, but struggle at keeping them alive, this trellis has you covered! Designed to complement your Oddish planter, this trellis offers not…
Both current sizes fit on a standard Prusa MK3s/MK4 build plate. The small trellis is 127mm (5") tall and the large trellis is 190mm (7.5") tall.
Click here to see collection containing more gardening related designs by 3D Printing Bug. Give your plants a stylish and sturdy support system with the Garden Trellis - Rectangle Series ! Designed to provide both function and aesthetic…
Rise Garden plant supports Print in PETG, 25% infill Gyroid
These models are intended to attach 4 inch square wire fence panels (such as Hog Wire) to corrugated metal raised garden beds (such as Vego Garden). I printed mine using PETG with 4 perimiters and 15% infill. ASA would likely be better…
Bit of a rough print with the overhangs but I didn't design it to look good just to hold up plants.
Trellis for Aerogarden Bounty models. Can be stacked. Print A and B plus 4x connectors per level. I used PETG with 2 wall loops and 25% infill and it was plenty strong. Adjust as desired. The f3d file for the connector is parametric and…
I would recommend printing this in PETG due to it being outside and better characteristics for for that environment. I recommend using brims (updated to print better on bed and added a indent for string to sit)
Two different brackets to create a 45 degree trellis out of cheap 2x2 wood. Designed for 39mm material to give a bit of wiggle room. The A bracket creates the 45 degree peak, and the T bracket is reversible allowing it to be the top (up…
Created for the “plant climbers & supports” contest based on a simple trellis design available at many garden stores. The parts are designed to stack together to support climbing plants at different heights, and then the sun ornament can…
Here is a lofted twisting trellis in a pentagon shape for your garden plants! I include both a single & 4-tier trellis. You can print just a single trellis, a 4-tier, or print out many single ones and stack them to the height you desire!…
Small tomato trellis bobbin with a ratchet locking mechanism and integrated hanging hook. The current version includes a fixed locking block, but my plan is to replace it with something more flexible in future versions. In this…
Plant trellis for air succulents
Support for plants. Plant Trellis. Total length 31 cm.
You'll need to print one base and then how ever many extensions you want to!
I designed this to aid people wishing to make trellises as shown by Youtube channel “Josh Sattin Farming” in this video. It's sized to fit 15mm aluminum conduit closely enough to serve as a coupling all its own, without need for the…
A fun trellis for plants to climb and grow...really only need supports for the spiked feet.
This is a simple 7in diameter and .2in plant trellis. Works great with Hoya plants but will also work with other plants.
Here we have a very basic ladder trellis that can be stacked as the plant grows. The scale is easily adjustable if this is too big (10.5in x 3.75in) or small as well but this was about as big as I could get on my Ender 5 Plus. I had to…
Great for vining plants like Pothos! I'm using it to create a living wall in front of the window of my apartment and have been making seasonal decorative panels. The current setup is pretty sturdy and gets more solid as the plant is woven…
An easy to print plant trellis to improve plant posture!
Trellis/railing holder / Halter für Rankgitter
Modular plant trellis for 6.2mm (0.24 inch) wooden rod I wanted something for my cucumber to climb on and couldn't find anything useful that I could extend as it grows. I made this modular system that can be extended both vertically and…
A small honeycomb (hexagonal) trellis designed to support household plants. The two spikes at the bottom hold it securely in the soil and prevent plants from tipping. Dimensions: Total height: 261mm Honeycomb height: 200mm Width: 131mm…
Round trellis with inserts for climbing potted plants Dimensions: Approx 294mm x 100mm x 5mm
I have tested this model with PLA, but feel free to print it in something stronger if you need it! PLA - 25% infill - No Supports - Print with ring on build plate.
Just print and snap onto your wire. Never run out any more of providing emotional and physical support for you lovely green friends Made a few different sizes 15 mm ( 4 minute print ) 20 mm 25 mm 30 mm
This 3D printable plant trellis is shaped like the iconic Cool S graffiti symbol. It is a fun and unique way to support your climbing plants, and it will also add a touch of personality to your garden. To use the trellis, simply stick it…
Overview This scalable trellis uses commonly available materials to support plants that grow upwards, including tomatoes and peppers. It's designed for single-plant support, as opposed to trough-growing where you'd have multiple plants in…
Support for plants. Plant Trellis 3 sizes: smallest for 4 leaves, total height 17.6cm larger for 6 leaves, total height 25cm largest for 7 leaves, total height 29cm
I used 2 walls and 10% gyroid infill and that seemed well enough to keep it upright and sturdy while holding up a plant.
My wife needed a trellis for her Christmas/Easter (and now Halloween) cactus. Simple design, no need for supports. I printed with PETG, but PLA would be fine and would give this a little more rigidity Category: Outdoor & Garden
So growing tomates in a harvest 360 is a bit of a chore. i waited too long to put this in but it is in now. this works great even for heavy loads. it is wide open enough that you can fill the water easily. There are holes at the back so…
Designed these for propping up some basil plants that were struggling to support themselves. Based on a product design I saw online. Personally printed in bambu orange ABS with default profile.
Check the learn guide link for code, build photos, circuit diagram and more! https://learn.adafruit.com/neotrellis-soundboard/ This is a sound board using Adafruit’s NeoTrellis. This lets you trigger audio files so you can play it like a…
This holder is printed with the bottom on the print plate for maximum stability. Holders, that are printed on the back, easily break at the front of the slots. If you want more or less compartments, different slot or srew diameters or…
A trellis clip for plants. Works great for tomatoes and squash. Compatible with string trellis'. Reusable. Strong. Prints in 16 mins. I use: tree supports 40% zig zag infill Coasting Enabled Infill Travel Optimization Enabled No build…
Basically just a wooden PLA, U shaped trellis I made to resemble a curved piece of bamboo. Scales up or down easily and doesnt need a lot of infill but id recommend at least 15% to be safe in case you have the urge to flex it like I did…
General: This is a small clip that clips together two metal rodes for gardening / framing It's 360 degrees rotatable You need a bit of 1,75 mm Filament Made for: It's made for trellis (green metal rodes) with a diameter of 11 mm…
Here are New connectors: Modular plant trellis system for garden beds and raised beds with plug-in connectors and integrated ground anchors. This trellis system was designed for climbing plants and vegetables and can be expanded in width…
another remix because the 90 degree version of my set remix didnt work so i just made one that prints already together. sorry i got fixated on remixing this. i promise i'm done now. you could get them in position and then melt the two…
