2033 modeli
V3 Update: Removed the sharp part on one side and added reinforcement to the top and around where the spring seats. Also used the reinforcement to lay the part down. I have not tried this yet, so not sure if a raft or support would be…
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
[update] I added a new version “trayStackerShort” which doesn't extend as deep into the tray. This is useful when freezing liquids so the stackers don't get stuck and it prints faster.[/update] These have been confirmed to fit trays for…
Wydruk około 4,07 €–4,98 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to substitute the barrel jack on my DPS power supply with USB-C PD but didn't want to redesign the whole case, so I made this adaptor that fits in a 12mm opening like a lot of panel mount switches. For the PDC004-PD trigger board…
Wydruk około 0,31 €–0,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a trigger lock to prevent unauthorized use of an FX Dreamline pcp air rifle. Simply print in STL orientation at 0.2 layer height and 25% infill with no support, attach a padlock and lock. The trigger lock will work with any…
Wydruk około 0,34 €–0,42 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model is a panel mount for a USB-C trigger from Amazon. The trigger can request a fixed voltages from a USB PD power supply for project use. To print this, I split the “Trigger-Insert” file in PrusaSlicer. I also included a “blank”…
Wydruk około 0,36 €–0,43 € nettoWstępna wycena jednego wariantu
Sturdier RatRig 4 VCore Front Clamp with more clamping force
Wydruk około 0,39 €–0,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Trigger guard for lepus-like foam blasters. No modifications to original blaster files required; it just clamps on! Only requires 1 M3 bolt to tighten the clamping mechanism and prevents you from accidentally actuating the exposed…
Wydruk około 3,14 €–3,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Additional parts: Threaded inserts (M3x4mm) and 20mm spacer between Orbiter Extruder / Toolboard mount required. CAN-FD on Duet3D boards rulez ;) Printable in ABS. Use at your own risk. Please give me some feedback and post your make as a…
Wydruk około 1,08 €–1,33 € nettoWstępna wycena jednego wariantu
I printed mine in PETG, but CAN be done in PLA as well as other materials. The model just needs the old spring and washer from the original trigger to be put on the split pin on the rear of the trigger. I included the CAD file used so…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Timelapse trigger holder for d3v-163-1c5 microswitch. I suggest using long arm version of the switch. Will be triggered at X=0, custom G-code needed for timelapse (see below). Print clip side down, as show in print bed image. Clips can…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
This a replacement trigger of the Dyson BigBall. Mine was broken, i designed the original via Fusion360. Printed in PLA (PETG should be possible). Nozzle 0.25 mandatory. Infill 80%, Brim 5mm , Layer 0.10 Enjoy the model to fix your broken…
Wydruk około 2,52 €–3,08 € nettoWstępna wycena jednego wariantu
Feets for 3030 Mesh Cuboid enclosure from RatRig I have bought this Mesh 3030 Enclosure Cuboid from RatRig : https://www.ratrig.com/modularenclosuresystem/enclosure-standard.html But it comes without feet… 3030 extruded aluminium can easy…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
Simple revo mount for ratrig toolhead V1 that use Rapido, use 2 M3x8 screw. This is a mod of the original Ratrig files. Use the step in the files section to modify.
Wydruk około 1,32 €–1,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Time-lapse photography trigger earphones for elegoo neptune 4 pro. attaches to the edge of the x-axis with a hot glue gun. printed with white PETG plastic
Wydruk około 1,02 €–1,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Space-saving holder for the trigger point presses from Liebscher & Bracht. The presses are made for acupressure and pain therapy. My wife doesn't have a proper place to store them. That's why I designed this holder for wall mounting.…
Wydruk około 6,12 €–7,48 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Hi everyone, the Controller is designed to be printed standing up without supports. There is a bit of postprocessing required to remove the custom supports for the Trigger button flexure. Enjoy printing
Spiky Sensory Trigger Twisty Spiral Roller This Spiky Spiral Fidget Roller is engineered for dynamic sensory play, featuring tightly patterned geometric spikes that wrap around a twisting core. As it rolls, extends, and shifts in length,…
This is a remix of the awesome Joe's V4 spray handle , which is a remix of thefilamentcorner I removed the logo from the sides Print at a high infill % - I used 70% and its feels very solid. It fit all the spray cans I have laying around,…
Like the original model, it's printable without generated supports, though you can choose to enable supports to avoid sagging bridges. I printed with a brim, but the brim may not be necessary if you have good bed adhesion. After printing,…
This is remix originally by RoboCop0815 ( https://www.thingiverse.com/thing:4441407 ) Improved trigger via handle. For left handed or right handed - your choice :-) Use PETG if you want it stronger. How it works: Standard print settings:…
I liked this handle, but the trigger is too long. I decided to make a shorter version to use only 1 or 2 fingers to pull it. This way it allows a better and more stable grip on the handle. You just need the "Trigger_Short.stl" file, the…
*UPDATED 12/27/2024: The “Fix Model” warning has been resolved. Safety first! Rule #3: Keep your finger straight and off the trigger until you are ready to fire. I scaled mine to 122% to fit my G.I. Joe Classified and Action Force gear.…
This is a completely mechanical demonstration of the unit circle and corresponding trigonometric functions! Rotate the handle on the circle to a corresponding angle and watch the sine, cosine, and tangent graphs' value change with the…
I have not FDM printed this model yet, but did have good results with a ps3 button I did years ago. I SLA printed this model out of ABS-like Prusa Resin for a custom project I did and thought the base file I made might be handy for…
Trigger buttons for the Ayn Thor, printed on 0.08mm Extra Fine preset with tree supports. Fixed the friction between triggers and shoulders. Enjoy!
created a print-in-place trigger locker for my dyson because its very annoying to push the trigger the whole time. Tested it with the v8 and v15 but should work with others too. Tried PLA and PETG. Both worked fine. No Support needed.
Relieve tension in the head, neck and shoulder muscles and improve posture, eliminate tension and relieve pain Place it under your neck where the skull ends and GENTLY lay on it to relief neck muscle pain and headaches. You can use the…
The objective of this build was to explore and understand trigger mechanisms. In particular, how to achieve a light but reliable lock mechanism and one that re-cocks both the trigger and the bolt in one motion, so that a true ‘lock &…
This is a remix of Corefile's No Logo version , which is a remix of Joe's V4 version , which was a remix of FilamentCorner's version. My only complaint about the original versions of this handle was the length of the trigger. I like to…
I liked the spray trigger gun, but noticed the author mentioned about how strong the trigger was due to splitting at the layer lines, and he referenced people stating it was failing due to this. I think it's cool it was print in place,…
Rear mounted Enclosure for the V-Minion compatible with the SKR2, SKR E3 MINI V3, SKR PICO. Using this enclosure will require the use of a custom Y endstop mount, which mounts on top of the extrusion rather than the side. SKR2 SKR E3 MINI…
The handle should now work for cans with smaller caps, such as this one. Have fun with it and please share your makes :)
I have tried a few other T slot covers that I have found on here but non of them were satisfactory. So I drew one from scratch. This one is designed to flex in the middle, something none of the other ones could do. It will be a tight fit…
Enhanced Trigger Guard for the fingy that do the worky
Very simple vacuum cleaner trigger lock. No additional materials needed. Holds very well due to the tight fit between the finger rest and the sloping bottom of the container. I expect minimal wear due to the default position without load.…
My own creation from inspiration of several models out there. I wanted something that would lock the trigger to an ‘on’ position yet allowed my finger to still use the trigger without significantly hindering its original operation. Also…
A Totally new make of the revolver from the original Trigun anime. This is the post repairs version with the smooth side cylinder. If there is interest I will also make an optional fluted cylinder like he as at the beginning of the…
Like Rilot's design, this model attaches to the lip below the trigger but leaves much more space for normal trigger operation. The lock can be flipped using a single finger allowing for one-handed operation and you can easily switch…
You can find the original model HERE with the proper printing instructions. This is the version 1 revised ‘strong’ model of the gun. .F3d file included *
The original button breaks if pressed with force, in this reinforced version I added a thickness to increase the resistance to pressing the button. February 20, 2025 - New retopologized and more strengthened version at the following link:…
I was disappointed with the other offerings for the A-180. So, I built one with 3D printing in mind and a working trigger! To improve on its aesthetics, I wanted to have a few parts to assemble after printing. It should be obvious where…
Adjustable blade trigger for AAP 01, should fit WE glock to. 3mm grubscrew for adjustment. Suggest to print it laying down.
The FAN RETURN can be used with or without the following HEPA filter cartridge. https://a.co/d/hSXwPuz The HEPA filters main purpose is for noise attenuation. Use the “FILTER_BLANK” if not using the filter or use…
This file basically adds 100% speed every 5MM of height up to %1200 using M220 gcode command, Add sufficient brim to hold the model in place and set the external wall speed to something reasonable like 30mm/s. and print in vase mode The…
*Version 2 Step file of the Base added to the files. *mounts added for PRO 1.1/1.2 plus Octopus. Some parts currently require supports. Uses M4x8x.5.5 Heat-set inserts.
Have you misplaced your silicone nozzle cap? Maybe you just didn't get it in the package (like in my case)? Well, here you go! It's the perfect length and taper for the nozzle. The threads are modeled so it screws on and off easily! It's…
I first printed this design in PETG with 5 walls and 40% infill and it held up great for about a month of moderate use every few days painting with several different cans of paint, the teeth sheared apart at the layers ultimately failed.…
*ADDED Z-AXIS DRAG-CHAIN MOUNTS. To fit a Drag-chain to the Z axis with the Belted Z you will need: MOTOR_MOUNT_Z_CHAIN_V1.1, Z_LOWER_MOUNT (V1) v1 BELTED_Z_BELT_NUT_MAIN_V1.1 BELTED_Z_BELT_NUT_CAP_2X_V1.1 ZX JUNCTION (V2) X MOTOR CAGE…
Private 13 is a soldier themed custom part set for soozafone's Dummy 13 1.0 action figure. The set currently includes: Scar-L - The well known and versatile NATO rifle, now for Dummy 13 to wield Helmet - A custom head for Dummy 13…
11.03.2022 - Updated positions of bores for both endcaps/ turned powerswitch (V2) This brackets fits to Meanwell UHP-350-24V power supply in combination with Ratrig V-Minion 3D Printer.
About This is a tool changer modification for the RatRig VCore 3 printer that utilises an E3D style coupling. Belts This modifications is designed with the intention of being used on an VCore 3 with the so called “OpenFront” modifications…
BOM Part # Photo M2x10 or M2x12 screws, self-tapping, countersunk src 1 src 2 src 3 , assorted src 4 , assorted 4 USB-C PD Trigger Board with DIP Switches amazon.com src 1 , verified src 2 src 3 src 4 aliexpress.us src 1 src 2 src 3 1…
Printed with standard Voron settings: Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb, triangle, or cubic Wall count: 4 Solid top/bottom layers: 5 Supports: NONE
[update] I created a new version ( https://www.printables.com/model/663843-improved-harvestright-drain-hose-plug ) that helps maintain a good drainage angle better. You probably want that one. [/update] Didn't like the hose just resting…
Latest V-Minion build featuring my current Mods including: Belted Z V2 (Beta.. with or without M5 Heatset Inserts) XY Drag-Chain assembly V2 Y Drag-Chain V2 Electronics enclosure EVA 3.0 FBS (narrow) mod Variations of all these can be…
These mounts use heatset inserts and M3x6_FHCS, longer M3x12_SHCS x2 are needed to mount to the bed plate. IGUS model: 0_62m_E2_10_10_018_0___E2_100_10_12PZ_A1_4 v2 12links. 3 hole open-back Drag-chain: Updated Y Axis Drag-chain mounts to…
Printed in PETG with hotend temperature at 235 degrees, 100% infill percentage, printed with supports.
Affiliate links for my favorite filaments to help support what I do are here: Linktree The Dyson V8 is a great vacuum but the lack of a trigger lock makes using it for long sessions somewhat painful so I created this trigger lock so you…
Update 11.08.2026: Added EBB36 Gen2 toolboard mount for the LGX Lite v2 and Moschito Magnum+ Liquid spacer Update 29.07.2026: Added 19 ID hose duct for the EBB42 Gen2 / Sherpa Mini combo Update 11.07.2026: Added OS2 toolboard mount for…
I - like many people - was annoyed by the lack of a trigger lock on the V11 series. I tried many solutions to this; some community and others commercial but all of them came up short. They either were a piece that I would lose, or they…
This is a bed corner piece that acts as a stopper to slide your spring steel sheets against. When assembling my V-Core 3 I instantly noticed that it would be almost impossible to properly place the steel sheet on the magnet as there is…
Flat trigger for the glock, i've tried it on the TM and WE platform, don't know if it fits the others. Print Settings Resolution: 0,12 Infill: 100 Category: Other
Attention: Your printer needs to be calibrated correctly in order to print accurate! Only 0.05mm offset to the components. 31.01.2022 - Added Leadscrew jig, might need some more testing! RatRig V-Minion alignment tools In order to fit the…
Looks great sitting on desk. Use a bit of glue to ensure adhesion Printed with 15% gyroid
Just my version of the Dyson V10 Trigger lock. Push hinge upwards till lock in place. To release, press trigger in and hinge should drop .
R2 and L2 replacement trigger for the SCUF gaming infinity fps controller PS4. I had a broken trigger, and i modified the standard triggers for the scuf controller. it could need a little bit of sanding. Mirror the part within your slicer…
Internal spool holder can fit spool up to thickness of 80mm. Two version, 2 piece version with the swapable cap to enable fitment of thicker spool or different size spool hole. Attached via m3 heat serts. Reverse bowden holder is attached…
Trigger button for the dyson v8 vacum. i printed it in esun abs+
A 3 part system which works on extremely simple spring mechanism! Printed in PLA. Layer height : 200um / 0.2mm Walls - 6 (minimum) Useful for anyone with small hands / kids. Also useful for people having clenched fist syndrome or more.…
This is a reproduction of "The Dana Set of Wooden Crystal Models" originally produced by Dr. Krantz Rheinisches Mineralien-Kontor (Bonn). triclinic monoclinic orthorhombic hexagonal/trigonal tetragonal cubic I recreated the models based…
I have created travel cases for the replacement vials of the YpsoPump insulin pump. And a cylindrical key case inspired by a design by user David Fish from the YpsoPump Facebook group https://www.facebook.com/groups/3214500962154148 ,…
This version keeps the clips on the guid at all times. They hinge down and snap into place making work with them a lot faster especially when you need a third hand. Update. My first prints of this all the parts fit nicely. I am adding…
Download the Installation guide and read carefully before taking on this modification. Go to the files tab page and scroll down until you find the PDF file for the installation guide. This extruder requires you to remove material from…
Introducing the Universal Flight Sim Trigger Module by @TheSimNet! Featuring: Dual or Single Stage operation Authentic operation Consistent return force Satisfying break action click Parts required: Mini Micro Limit Switch 5A 125 250V AC…
NOTE: I just tested this with my marker chrono'd for the first time and it does not work at full power. The sear spring is just not strong enough to get that sear back up in time. I'll work on that and get an improved sear spring uploaded…
I adjusted some parts to have tighter tolerance, and these adjustment take out backlash pretty much completely. I enlarged the big gear by 0.3mm and modified the inner hole for a tighter fit. Also increased the size of the arrow piece for…
cleaned up the files to be used on cnc-mill ore cnc-cutter
just a simple trigger for this kind of cheap airbrush. i modeled this for right hand use, obviously you can mirror it in your slicer to make it better for left hand use. its a fast print that does not need supports
Just a simple cover for airbrush trigger because the edges are sharp and my finger hurts when pulling the trigger
2/9/23 - created a v2. Added better supports, can see more HERE A quick jig to hold your Glock Trigger for maintenance and / or training. Kinda cool to pull the trigger and see how things work. I print the pin round side on the bed with…
After the release of the SLAB, I decided that I might as well try my hand at designing a trigger for something other than the LYNX. This may require support on the underside if printed flat, as there is a raised section for a cosmetic…
EVA3 cable_guide and the Ratrig V-Core 3.1 electronics_wire_guide_rear is modded to take 1.75mm bowden tube to act as a wireloom support. Initial idea was seen on TeachingTech's Ratrig V-core3 video.
Quick remix of https://www.prusaprinters.org/prints/80030-rat-rig-v-core-3-iec-adapter-surface-mount and https://www.prusaprinters.org/prints/82811-back-cover-for-iec-320-power-socket-ratrig to fit the iec-adapter I had ordered. I added…
This remix from pixelauthor's SN30Pro+ Trigger plate. pixelauthor's version has a profile that allows the same trigger plate to be instaled on both left and right R2 button. However the one downside is the trigger plate profile does not…
Since my original flat triggers for the Orion Blasters Lynx were so popular, I decided to make a couple more for people to enjoy. The Lynx_Speed_Trigger has a similar feel and pull to the stock trigger, if you prefer that kind of trigger…
Hi, I designed this tool for a esier installation of the trigger spring. Its designed for the CZ Shadow 2, but it should work also for other CZ models. The tool holds the spring and is more suitable than pliers.
With the little massage helpers, you can loosen stubborn trigger points. They are shaped like a human thumb and allows you to tread your trigger points in a targeted and effective way. You should of course know what you are doing. ;-) I…
RatRig wire guide that doubles as a mount for 35mm DIN rail. Uses a slotted hole like the original wire guide so the t-nut doesn't drop into the extrusion. Added chamfered ends for additional wire routing and a curved base with a slotted…
This Wiimote lighgun version includes gun sights and a modified trigger to add a pen spring for improved trigger action. With the gun sights, you can turn off those pesky onscreen crosshairs; for games that support that feature. Cheers!…
A redrawing from a photograph of a short-throw trigger. The main printing challenge lies in the blind recess in the center—it is best printed on supports made of special material, both the body and the separating layer as a whole.…
This is an upgrade to my previous mod to eliminate the aluminium extrusion from the x-gantry. You can run with just a single rail or with 2 rails screwed together by aluminium blocks. A single rail can save a lot of weight, while also…
4028 Mount for VzBot F3d Racing RatRig CNC'd aluminum Print Head. 2 version, M3 nuts or M3 Heatset Inserts BOM: 6 x M3 nuts or M3 Heatset Inserts 4 x M3x35mm Bolts 2 x M3x25mm Bolts 2 x M3x10mm Bolts 1 x M3x8mm Bolt + M3 Nut/Heat Insert…
Scharnier Tür RatRig V-Core 270° - Hinge Das Scharnier passt an die “originale” Tür vom RatRig V-Core 3.1. Dort sind sonst rechts und links Griffe und Magneten zum halten. Aber erstens hat man somit nie eine Hand frei und weiß auch immer…
This is a direct replacement for the 10/22 trigger. I have the upgraded trigger housing, but this should fit the standard one from pictures I've seen, can't confirm though. The holes are tight, so you have to drill them out with a 1/8"…
This is just an enhancement to the wonderful wire guide provided in the newest rendition of the Ratrig. I added 5mm of height to them for additional room for wires. I just added some more variations. One with a wider and also taller size…
A trigger shoe for the Game Face Trion dart blaster. I found the flat faced trigger to be uncomfortable, especially given the heavy pull. this wide and curved trigger shoe spreads out the pressure felt by your finger. Snap-on part. must…
Update: Added Fusion source file for remixing. For clarification the shims are slid over the main trigger body to make it fit better on thinner phones. Big update: This design now uses a shim system for thinner phones. This way I can…
I really liked my ssx23 holster, so I got a similar holster for my Glock, and I made it the same principle From what I've tested, it fits, WE Glock 17, WE Glock 18, WE Glock 19 There are 3 included files. Holster Trigger Piece Holster…
BOM: 2 cap head screw m6x12 2 t-nut drop in M6 1 brace_RR If you want to support my work, buy me a coffee thanks to Simon Vez, i took a cue from his model…
