1372 modeli
10, 18, 20, 21, 25, 30, 40, 50, 60, 70, 80, 90, 99, 100 th birthday geburtstag holder / stand for…..the XX th birthday ;) Also check out these models:…
Wydruk około 9,73 €–11,89 € nettoWstępna wycena jednego wariantu
I wanted to do a jointed model for the Printables contest. Jace1969 (who has a ton of great SW models) had this ATST model, but it was a solid model so I diced it up and added 14 joints to make it into a posable design. I was trying to…
Wydruk około 0,81 €–0,99 € nettoWstępna wycena jednego wariantu
I maked a simple cake topper for german people. Ich habe ein einfach Kuchendeckel für Deutsch Leute gemacht. Material: PLA Enjoy.
Wydruk około 1,51 €–1,85 € nettoWstępna wycena jednego wariantu
Philips Hue Lightstrips make good TV backlights, but I had trouble mounting them facing directly towards the wall and bending them downwards near the edge of the TV. This simple part helps to hold them in place and keep them flat, while…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The door holders wear out over time to the point of being non-functional, so I constructed more robust ones in the same dimensions: The upper part (female) measures 98 x 22 and has a hole spacing of 78mm. The two lower parts (male) have…
Wydruk około 2,16 €–2,64 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This nightstand bonsai organizer includes space for glasses, a watch, wallet, phone, kindle, work ID, spare credit cards, and coins. It includes a slot for smaller change storage, a built-in phone charger and secret drawer. All pieces…
Wydruk około 2,81 €–3,44 € nettoWstępna wycena jednego wariantu
nach 3mm Druck habe ich die Farbe gewechselt
Wydruk około 4,10 €–5,01 € nettoWstępna wycena jednego wariantu
Did your end caps fly off somewhere along a long country road? Don't want to spend $5 to buy replacement end caps for your Yakima JetStream roof rack? I didn't either! These are designed as a replacement based on the original model that…
Wydruk około 2,55 €–3,12 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is a stand for the official Lightstick of (G)I-DLE. It was printed in white PETG. The lightstick fits in with the ribbon.
Wydruk około 3,06 €–3,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designing a 3D-printable nightstand was one of my first bigger projects because I could not find a good one that was not too overpriced. I have maxed out the build plate of my Neptune 4 to make the nightstand as big as possible. It is…
Wydruk około 2,43 €–2,97 € nettoWstępna wycena jednego wariantu
It's the STL Version of Model: 792989 It originaly was a 3mf and can't be sliced and printed on every printer. Now: Converted via Orca slicer to STL sliced for Anycubic Kobra 2 Plus in Highspeed with PLA ----- Es handelt sich schlichtweg…
Wydruk około 15,05 €–18,39 € nettoWstępna wycena jednego wariantu
2023/6/11 - NEW Reupload!! I'm very sorry for the complications, I had to reupload all the models. Print instructions: I decided to use PETG. Printing the model does not require any special settings. See the attached 3MF file for detailed…
Wydruk około 5,22 €–6,38 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Two floor mini storage for the Smartstore.se 34x25x16 cm storage boxes. The lower floor is about 63 mm in height and the top one 60 mm. Those boxes are sold by Jumbo and Coop in Switzerland. You need: 8x 10 - 40 mm long M3 screws with…
Wydruk około 2,32 €–2,83 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This allows anyone with a Prusa MK3 or MK3S to mod their printer to use the Pitstop for better cooling, and the Mosquito Hot End (smaller, lighter and reliable). With this design you can replace the nozzle without taking anything apart. I…
Wydruk około 10,90 €–13,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Geschenkbox mit Deckel in Form einer 16. Kann mit eigenen Geschenken gefüllt werden. Gift box with lid in the shape of a 16. Can be filled with your own gifts.
Wydruk około 1,59 €–1,94 € nettoWstępna wycena jednego wariantu
zum anbringen an die Lötstation als Aufbewahrung der Lötstitzen
Wydruk około 2,42 €–2,95 € nettoWstępna wycena jednego wariantu
Clip für Leuchtstofflampen, Feuchtraumlampen
Wydruk około 0,28 €–0,34 € nettoWstępna wycena jednego wariantu
I needed a drybox for my XL 5H, that I can directly print out of. I found the “SmartStore Classic 45L” container from Orthex in my local hardware store (Bauhaus) and it matched the dimensions to hold 5 spools side by side. I designed this…
Wydruk około 2,60 €–3,18 € nettoWstępna wycena jednego wariantu
Unveil the essence of love this Valentine's Day with my effortlessly printable heart chain model. Crafted with affection, these hearts come in three sizes - small, medium, and large - allowing for a symphony of love to unfold. The…
Wydruk około 0,12 €–0,14 € nettoWstępna wycena jednego wariantu
This is a flashlightstand for the Klarus XT21X model if you ever need. It is a litle hard to get the flashlight to stand up right when needed. It is used in combination with the Klarus diffuser that you can find here. The Footstand is…
Wydruk około 1,08 €–1,31 € nettoWstępna wycena jednego wariantu
70° Winkel, für min. 12" Tablet geeignet, stapelbar. PETG; 20% infill; 0,3mm; <50g -------------------------- 70° angle, suitable for min. 12” tablet, stackable. PETG; 20% infill; 0.3mm; <50g
Wydruk około 2,71 €–3,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed a plastic shelf cap to support a radio on top of a Jetstream JTPS32MAB Power Supply. Printed it with PLA, and it has held up fine so far.
Wydruk około 3,50 €–4,28 € nettoWstępna wycena jednego wariantu
This is a stabilizing strut, for attaching the Vélo Orange™ Constructeur Rack on the rear of a bicycle at the seatstay-arm bosses. It is sized for a medium-size Vélo Orange™ Pass Hunter frame (2nd generation, circa 2020). Mounting Two…
Wydruk około 0,50 €–0,61 € nettoWstępna wycena dla PETGMateriał u źródła: PET
To cover the colorful Noctua Fan or the PitStop-Extruder and bring it back into the color concept.
Wydruk około 4,05 €–4,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Die 440/480Watt Solarkoffer von Plug-In Festival, Wattstunde, Enjoy Solar oder Offgridtec können nur in einem festgelegten Winkel aufgestellt werden und der ist extrem flach. Meine einfache Lösung verwendet mehrere Schlüsselbänder mit…
Wydruk około 1,69 €–2,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
For optimal storage of the foam injector on the high-pressure cleaner, this mount was developed. The foam injector is inserted horizontally into the mount and locked in a vertical position by rotating it 90°. This ensures that the foam…
Wydruk około 4,68 €–5,72 € nettoWstępna wycena jednego wariantu
Printed with 0.15mm layer height, fuzzy skin on outer layers with grey extrudr NX2 PLA.
Wydruk około 0,67 €–0,82 € nettoWstępna wycena jednego wariantu
Bring the pit lane to your sim racing setup! Inspired by the wheel guns used by professional pit crews, this custom shifter knob brings a bit of pit lane atmosphere to your sim racing setup. The design combines the distinctive look of a…
Wydruk około 5,32 €–6,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Update(8/6/23) : Added a low-interference version for anyone having problems with collisions with their toolhead cover. This one is harder to print, but it should solve the issue for people where they get rubbing with the support arm.…
About the tool A simple whetstone knife sharpening aid. Helps when getting started sharpening blades using a whetstone. 4 Different angles for different types of blades. 14°, 17°, 20°, 25°. Common Sharpening Angles: Pocket Knives- 20°…
Take your gaming experience to the next level! Upadate: 27.02.2026 -NEW modular version: optimized guide rails for the coinholders -NEW modular version: optimized hinge for the cover 22.02.2026 -NEW modular version with changeable…
Better Cleaner overhangs! Teardrop shaped hole with horizontal ring edges. Stronger parts! Weak point at the top eliminated. Rounded edges on contact surfaces! Helps reduce friction between the tool and working surface reducing wear and…
Nothing special. Print with supports.
Remixed Whetstone block, to be used with knife to slide along the block maintaining the correct knife angle. 4 x different angled sliders to get suitable angle. Common Sharpening Angles: Pocket Knives- 20° Hunting Knives- 25° Fillet…
More updated designs on malerworld since i’ve moved to bambu printers : https://makerworld.com/models/661522?appSharePlatform=copy These nested cups are designed to fit in both the small and large bins from the Dewalt TSTAK Shallow…
Knife sharpening helper / guide for 60 x 180 mm whetstones. Remix of "Whetstone sharpening helper" by Rejd (thingiverse.com/thing:2493459). Sliders, slider angles and base plate shape were modified. Max stone height: 30 mm Angle…
I thought this weapon looked neat, so I decided to make it! I took the model from the game files and split and modified the model. The break-action and trigger were also modified to move. If you'd like to do the same to one of your…
After coming across afri.mandjelikian great design for the Dewalt/Stanley/Craftsman TSTAK FATMAX Versastack Organizer Nested Cups , I needed one for storing various sized M3 Button Head Socket Bolts in. I decided it would be more…
This is a hitbox-layout low profile fightstick. It uses Kailh low-profile (choc v1) mechanical keyboard switches. Should be printed at 0.20mm layer height. Prints without supports. I used an Arduino Pro Micro clone, but many other boards…
Fred Flintstone is one of my favorite childhood cartoon characters. Fred was modeled in Blender, sliced using Simplify3D and printed in ABS on a FlashForge Creator X. I also used a GeckoTek plate to ensure perfect adhesion of the parts to…
This is a fully 3D Printed Stirling Engine made by New Zealand ProjectsToPrint (now defunct). It only requires a printer, printer materials and a few basic home tools and materials to make. It is powered by hot and cold water. This does…
I was asked to have a go at creating some KPop lightstick keyrings. Girls Generation (SNSD), EXO, BTS, NCT, B.A.P, Stray Kids, Loona, Twice and Seventeen. What else would you like? They should push together snuggly. Print with supports.…
Found these at https://facepunch.com/showthread.php?t=1304034&page=6 Also found AnyCad converter with the click of a button turned them straight into .OBJ and .STL's http://www.anycad.net/the-free-3d-model-converter-anycad-exchange3d.html…
I added text to it so you can remember the use. PLA, 0.15 mm layer height , 10%infill.
Here is a link to an Etsy store if you'd like to buy the complete bit case from me: https://www.etsy.com/listing/1377181851/ltt-screwdriver-bit-case This is an insert for an Altoids tin for the LTT screwdriver. It can fit the entire set…
The Flintstones are one of my favorite childhood cartoons. Dino was modeled in Blender, sliced using Simplify3D and printed in ABS on a FlashForge Creator X. If you have the proper filament colors, no painting is required. The model is…
Sharpening jig using a whetstone. Baseplate has guiding rails, knife just gets inserted either in the 25° slot or laid on the 20° flat of the slider. Not even quite sure what to use the 25° for besides pocket knives that get heavily…
This is a super simple sturdy Life Organizer for your bedside that prints with no supports!
A Bookstand/Bookmark that also serves as a handy organizer for your nightstand. A practical way to hold your book and keep your page. It has a place for a few pens or pencils, a place for your glasses, a drawer for miscellaneous items.…
Customizable sharpening guids for whetstones / sharpening stones. There are various other versions of such guides available, but none of them made me 100% happy. This one is customizeable in size and keeps the rubber band safe in its…
Zigarettenboxen mit verschiedenen Stückzahlen für Selbststopfer. Unterteil gedruckt aus ASA, Oberteil (Deckel( gedruckt aus TPU.
Wilma, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. Wilma was…
Pebbles, from the Flintstones cartoon show by Hanna-Barbera. The Flintstones cartoon takes place in a romanticized Stone Age setting, depicting the lives of the Flintstone family and their best friends and neighbors the Rubbles. No…
20-5-2024 parts have been updated for a better parts fit _________________________ Compatible with both the FGC6 MKI and MKII models (SF bolt checked: works with the SF bolt ) this adjustable butt stock is compatible with the MKI version…
The Slimbox 2040 is a stickless, all button, low profile fightstick, remixed from the original Slimbox by jfedor . The following changes have been made with the GP2040-CE firmware and quality of life in mind: Built as a cheap alternative…
This is a hitbox-layout fightstick controller that uses 24mm (Sanwa OBSF-24) and 30mm (Sanwa OBSF-30) arcade buttons. There's a version with 6 and another with 8 action buttons. There's also a 218mm-wide version that should fit on an…
A simple assistant to keep a constant angle while sharpening knifes with a whetstone. Technical Data: for Whetstone 180x60x30 for Whetstone 182x62x30 for Whetstone 200x50x25 Print Settings: no supports required printed with normal PLA…
An all button fightstick also known as a hitbox or leverless arcade stick. Beats having a joystick as it's quicker and more precise with movements. This is an early design of mine that I attempted designing one. Functionally works but…
I needed some better organization for all my stuff used often or just occasionally for 3D printing and Arduino making. As soon as I saw the DeWalt TSTAK double drawers I knew those were for me and I was lucky enough to run across…
I recommend scaling up to 1" on the sides (166%).
Nicht AMS-Version: Das Filament muss für schwarze Schrift auf 1.5mm und für das grüne Kleeblatt auf 1.9mm höhe gewechselt werden. Dies entspricht bei 0.2mm Schichthöhe den Schichten 7 und 9.
MDT Inspired buttstock, to be used on a Savage B22 Precision rifle. Or modify it at your will to adapt it on any rifle. Main stock body uses 2 M4x20 screws with 2 M4x6x6 insert Use a M10x80 hexagon socket screw and M10 nut for the…
Clip for Philips Hue LED Lightstrips with hole for countersunk screw.
Here's a custom gridfinity baseplate for the Craftsman Versastack and Dewalt TSTACK double drawers. I provided STL that are split up into quadrants and a full plate if you have a large printer.
Lightstick stand for Blackpink Lightstick
Introducing PrintStick - A revolutionary new glue gun upgrade! PrintStick is a great new addition to any arts & crafts project, as it turns any ordinary hot glue gun into a WORKING 3d pen! The best part is, PrintStick is a print-and-play…
Reuploaded from BigMrTong from Thinaverse, i Did not make this model, please read below for their description and support their patreon. A late night kitbash for fun. 80% of parts are just remixes, I have linked all these on the Remix…
Fix all the part like the plan in PDF with M4 x 25mm wood screws, I put mine on 388mm x 290mm x 20mm wood bord.
These are designed to fit into the existing trays so you can split the volume into two sections, the inserts come in small and large and single compartment or double or quad. The tray sits about half way down inside the original tray…
Here are four different mounts for Philips Hue Gradient Ambience Lightstrip. First one is a loose fit and the second one is a much more tighter fit. The other two mounts are the loose fit, but with an 30 or 45 degree angle. These mounts…
A box organizer for the game Hitster. The stand can be used for holding a smartphone, the phone can simply be put down and the cards inserted at the bottom of the stand. In my case it is an iPhone 13 (should also fit an iPhone 14).…
Fred Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Fred Flintstone based on my multi-part Fred Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek)…
I bought a 9-piece set of sharpening stones for Stefan's CNC Kitchen knife sharpener ( https://www.printables.com/model/81237-knife-sharpening-tool-v21-with-video ), but needed a way to store them. There are cases for smaller sets but not…
Dino, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Dino based on my multi-part Dino model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek) for this project. See his work…
Original Idea came from Darren Bartley's Khanivore. From Love Death and Robots 1st episode. But I tried to move away from the iconic shapes he created. Miniature is divided on parts for easy printing. 360 degrees video Not yet…
Using a mlok rail qd mount, some m4 bolts and nuts, you can now add a quick detachment point for your sling to your Magpul MOE stock. The 3d printed piece acts as a spacer and to increase surface area, the weight and the forces are…
With this 3D-printable stand, you can securely and safely display your Sonny Angels without any risk of damage. Perfect for home use, exhibitions, or as a thoughtful gift idea. Make your collection stand out while protecting your Sonny…
Custom made for my Wusthof whetstone (ref 704773), here is my sharpening device ! Inspired by some i found here, i made my own, according to my tastes and needs. I purchased the stone online on knivesandtools (24€ + shipping) , very happy…
This stand is made for holding the Apple Mag Safe Charger. The stand is 3D printed in the orientation it would be placed on the nightstand, with support structures enabled throughout. The recommended print settings include a layer height…
Ultimate Apple Dock/ Nightstand iPhone | Apple Watch | AirPods Pro 1, AirPod Pro (non wireless charging) and Apple Watch dock by Freddy https://www.printables.com/model/99062-dock-for-airpods-pro-all-generations-and-apple-wat/files 2,…
Pebbles Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Pebbles Flintstone based on my multi-part Pebbles Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz…
I reverse engineered MDT buttsttock spacer. it is compatibile with original. Don't forget to reorient the model on the bed in a slicer. It is upside down by default. No supports, Enjoy.
BamBam Rubble, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of BamBam Rubble based on my multi-part BamBam Rubble model that I've previously posted. I teamed up with maker/designer rebeltaz (Derek) for…
The Colossus has fully overtaken the front lines. The smaller, slower war machines stood no chance. Faced with the possibility of losing the war entirely, the 13th War Council gathered around the idea of an airborne Dummy arrangement.…
Simple organizer design to separate small parts in the dewalt two drawer tstak boxes. They can easily be lifted out as needed. Several versions available depending on what you are storing. I’ve found the 2x2 to work especially well for…
Dino the Dinosaur: The Flintstones
Wilma Flintstone, from the Flintstones cartoon show by Hanna-Barbera. This is a onepiece version of Wilma Flintstone based on my multi-part Wilma Flintstone model that I've previously posted. I teamed up with maker/designer rebeltaz…
This inserts should work with the Craftman Versastack 2 Draw Tool Box (#CMST17804). https://www.craftsman.com/products/storage-garage/tool-storage/tool-boxes/cmst17804--versastack-double-shallow-drawers I think it should also work with…
Its an custom Arcade Controller Box for Sanwa Joysticks and Sanwa Buttons. Ideal for Street Fighter and Retro Gaming
English Introduction: This 3D print template allows you to create a scraper with a plastic blade that won't damage your print bed. The plastic blades are printed with a 0.2mm nozzle, and it's recommended to use the provided print profile.…
The inside is channel is chamfered so it can be printed without supports. I printed mine at 0.1mm and it fits perfectly. A bit tighter than the official knobs. If you need to adjust the tolerance for the potentiometer you can download the…
Bins and baseplates are optimized to fit Craftsman Versastak drawers and DeWalt Tstak drawers. Fillets and some wall thickness were removed from the bins. Bins and baseplates were both modified to fit 8x3mm magnets instead of the weaker…
Set of designs to make a ‘table top’ or connector for on top of a DeWalt Tstak toolbox. I used one to create a connector to hold my Ryobi Vacuum on top using https://www.printables.com/model/1044158-ryobi-link-wall-mount-single-cleat as…
I wanted to print the original model on my Prusa MINI, but it wouldn't fit the smaller build plate even when rotated...so I edited the file by chopping off the corners so it would fit! You will still need to rotate the model to fit…
This is a Stand for the Arturia Beatstep Pro. You can use it in two ways
The TS80p is the soldering iron with the best price-performance ratio. Although it is just USB-C powered with a max power consumption of. 30W, it outperforms much higher powered irons. This is achieved by a clever design where the heat is…
Harley Davidson Sportster 883
This is a left and right side base for the DeWALT TSTAK II FLAT TOP tool box (DWST17807). It conforms to the bottom of the tool box so you can fill it with Gridfinity-based containers. I used a magnet base so that the containers won't…
Ein 3D-Modell, das eure Spieleabende auf ein neues Level hebt. Organisiert alle Karten und Chips. Zusammenbau: Alle Karten in den Tower legen. Spiel-Chips in den Halter (Links neben dem Tower). Handy Halterung auf dem Tower stezen. Ein…
