Wyniki wyszukiwania: turnigy

Sortowanie

49 modeli

P
PrintablesSV SYA

Flysky/Turnigy i6 phone holder

I fly my drone using the receiver from eachine to receive the 5.8GHz signal video feed. This feed can be directly shown on any smartphone with an OTG USB interface! This design was based on thing: 1415509 and modified to fit a smartphone.…

Pobrania
187
Polubienia
12
Ocena
0

Turnigy Round Servo Horn

This is a blank for sizing

Pobrania
90
Polubienia
7
Ocena
0
P
PrintablesRB3

Turnigy Lipo 2.2 3C Battery holder for Q450 F450 DJI

Remake of pintokitkat's battery holder. This remix holds a Turnigy 2.2 3C battery. I am using it on my Hobby king Q450 quad-copter. Category: R/C Vehicles

Pobrania
89
Polubienia
6
Ocena
0
P
PrintablesBarko99

Flysky GT3B / Turnigy GTX3 replacement throttle lever

So after some years the throttle lever of my Turnigy GTX3 broke. I modeled the broken part, and changed the lever design. This design gives me much more control over throttle and brake. I printed the part from PETG, 0.1 mm layer height…

Pobrania
83
Polubienia
4
Ocena
0
P
PrintablesPlasticyBits

Turnigy D2826 2200kV Motor Mounts

Motor mount for the Turnigy 2826, 2200kV motor. Another little project off the smokey Anet A8! Two versions; a 90 deg angle mount, good for front mounting. Also a 12 deg tilted mount, which is good for pusher mounting. Also a raised open…

Pobrania
71
Polubienia
2
Ocena
0
P
PrintablesBarko99

Flysky GT3B / Turnigy GTX3 hex wheel adapter

I wanted to have a different steering wheel on my turnigy gtx3, so i came up with a quick sketch to mount a m-chassis wheel with 12mm hex to the transmitter. I like the size of the m-chassis wheel better than an standard touring car tyre.…

Pobrania
70
Polubienia
1
Ocena
0
P
PrintablesMichal K

Turnigy 9x bigger Battery Tray Cover

After this cover modification, you can accomodate 2x18650 batteries, probably also some other ones. Print parameters: Material: mine is Prusament PETG Anthracite grey

Pobrania
57
Polubienia
5
Ocena
5
P
PrintablesGuim RH

Flysky / Turnigy i6 Transmitter FPV Mount

This is a remix form another model. Here I only uploaded the moditications done. You should go to the original part and take the misssing files. Based on this design ( https://www.thingiverse.com/thing:1607446 ) I made a new top part to…

Pobrania
54
Polubienia
9
Ocena
0
P
Printablesmcweck

12mm tire hex adapter Turnigy Trooper SCT 4x4 1/10 A2016T 32746

Since I couldn't find anything on Ali when looking for a spare part, here is a replacement for the 12mm hex tire adapter (part number: 32746). I printed it in ABS, but it would probably also work in PETG or PLA. edit to your needs.

Pobrania
50
Polubienia
3
Ocena
0
P
PrintablesMvRens

LiPo case for Turnigy 4000mAh 5S + TS100

Protects the battery from accidentally hitting it (briefly) with the iron and provides a place to put the TS100 when not in use. Comes with a hook to keep the balance connector in place and a built-in XT60 cap. I've also included a…

Pobrania
48
Polubienia
7
Ocena
0
P
PrintablesPlasticyBits

Turnigy Aerodrive SK3 3536 1400kV Motor Mounts

Motor Mounts for the Turnigy Aerodrive SK3, 3536 size, 1400kV. Incorporates holes for the motor mounting screws. One is 90 Deg angle; the other has 7 Deg tilt off vertical. Print with the motor side (the side with the big hole) flat on…

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesMichal K

Turnigy 9x Antenna to JR Module relocation

Print it with the cylinder heading upwards. Supports needed only on unvisible surfaces. V1 - Original Turnigy antenna V2 - Antenna with SMA Connector (WiFi) Print settings: Layer height: 0.2mm Top Layers: 7 Bottom Layers: 5 Supports:…

Pobrania
37
Polubienia
1
Ocena
0

Modified Turnigy TGY-D56MG

This is a sizing blank

Pobrania
36
Polubienia
3
Ocena
0
P

Sport Cub S2 motor mount for Turnigy 3536 motor

Sport Cub S2 motor mount for Turnigy 3536 motor

Pobrania
35
Polubienia
2
Ocena
0
P
Printablesmcweck

RC Body Mount Turnigy Trooper SCT 4x4 1/10 A2016T

Unfortunately, there are no longer any spare parts for the A2016T and the bracket often breaks, so here is a cheap replacement. Part Number: 30286 There is a 2nd version if the shock tower with the holder for the body mount has broken…

Pobrania
32
Polubienia
4
Ocena
0
P
Printablesmwelter

Turnigy 9X Monitor Support

A modified version of the Monitor Support by Straub for the Turnigy 9X. I have an Eachine LCD5802D Monitor but it should also work with other ones. You'll need a M5 x 50 bolt and an M5 nut and you can get a grip for the bolt from the…

Pobrania
30
Polubienia
1
Ocena
0
P
PrintablesBBaslican

Turnigy 1/10 Brushless 2WD Desert Racing Buggy Parts

I share and will share 3d designs of some broken parts of Turnigy 1/10 Brushless 2WD Desert Racing Buggy that I bought on 2012 from HobbyKing. Part Numbers: 33345

Pobrania
26
Polubienia
13
Ocena
0
P
PrintablesChristian Erazo

RC ToolStand Turnigy LRP

Tiny RC Tool Stand for Turnigy Tools and LRP

Pobrania
26
Polubienia
7
Ocena
0
P
Printablesgoesta

HobbyKing Turnigy RC Car Spare Parts

Spare part(s) for a 10+ years old HobbyKing Turnigy RC Car. Maybe it's useful for someone.

Pobrania
23
Polubienia
9
Ocena
0
P
Printablesmotivecodex

Turnigy 9x antenna cover

Turnigy 9x antenna cover

Pobrania
23
Polubienia
1
Ocena
0

Turnigy TGY-D56MG

This is a blank for sizing

Pobrania
22
Polubienia
2
Ocena
0
P
PrintablesPeter Broeders

Turnigy 1/16 AWD Buggy Rear Skid and Spur Gear Cover

Turnigy 1/16 AWD Buggy Rear Skid and Spur Gear Cover made this one, because the Spur Gear was open to the elements... Enjoy!

Pobrania
21
Polubienia
3
Ocena
0
P
PrintablesHasan BAŞUSTA

turnigy 9x battery cover

Turnigy 9x Pil Kapağı

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesGavin

Battery Cover for a Turnigy -i6 Transmitter

Battery Cover for a Turnigy -i6 Transmitter

Pobrania
20
Polubienia
0
Ocena
0
P
PrintablesBackmann3D

Turnigy Reaktor 250W 10A Stand 45° tilt

This is a 45° tilted stand for the Turnigy Reaktor 250W Charger. It's designed to print quite easy and then be screwed together with 6 m3x16 screws. This set of screws from banggood works very well and is very handy to have for a lot of…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesSzaman
Pobrania
17
Polubienia
2
Ocena
0
P

Phone Holder for Turnigy 9x / Flysky th9x

Remixed this great design to fit a 78mm wide phone instead of a tablet. In addition, the bracket for the telemetry dongle has been expanded in height to 12.5 mm. P1 now has an additional hole for the antenna of the radio and is smaller on…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesJRD

Emax Babyhawk Turnigy 2s 300mah Battery Support

A support to better locate the battery, printed in TPU Print instructions Category: R/C Vehicles Summary A support to better locate the battery, printed in TPU Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: Yes…

Pobrania
16
Polubienia
0
Ocena
0
P
Printablesmotivecodex

Turnigy 9x pot knob

Potentiometer knob with better grip and view on which position the knob is turned to.

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesJangy

Add a Turnigy Tacho / Tachometer to a Turnigy Thrust Measuring Stand

Test both RPM and thrust at the same time. Great for matching or testing quadcopter motors. Remove two M3 bolts and replace them with longer ones, M3 x 10 and washers. Also great for testing ESC and add large load to a battery Category:…

Pobrania
16
Polubienia
4
Ocena
0
P
PrintablesPedro Azevedo

Turnigy Micro Quad V3 landing gear V2

As I did not like the way the land, I decided to create a landing gear for Turnigy Micro Quad V3 original. Height - 48,00 mm Width - 25,80 mm x 26,23 mm Screw M3 Print Settings Printer Brand: Deltaprintr Printer: Deltaprintr Kit Rafts:…

Pobrania
15
Polubienia
0
Ocena
0

Turnigy9x throttle stick centralizer

This part forces the radio's throttle stick to the center position. Used for multirotor drones putting it in the internal stick set of the Turnigy 9x radio. For installation, open the radio and install de part in the throttle set like the…

Pobrania
14
Polubienia
0
Ocena
0
P
Printablesvnkpvl

Turnigy 1/16 Front bumper

Replacement of the broken Turnigy 1/16 buggy front bumper (part number: 110BS, A2003, A2010 A3007 14100 30703) Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: Yes Resolution: 0,2 Infill: 100% Filament: Prusament…

Pobrania
14
Polubienia
1
Ocena
0

Turnigy sk8 pulley cover

With small tuning of turnigy motor mount, You can use this pulley cover. You just need : drill with 3,3mm diameter thread cutter M4 2 x M4 x 25 screws My setup is 16T motor, 36T wheel, 275mm HTD 5M belt

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesKFWoeltje

Turnigy TGY-5RX receiver mount

Needed a mount for my R/C receiver for a robot I'm building. Very simple but gets the job done. Included step and .f3d files in case you wanted to modify design to fit different model receiver. Print Settings Printer Brand: MakerBot…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesJATMN

Battery Bracket Upgrade - Turnigy TZ4 1/28 Scale (Mini-Q3/Q5)

This is a battery bracket upgrade I did for my Turnigy TZ4 1/28 Scale RC Car. I replaced the stock 400mah battery with a 800mah battery and it was putting too much stress on the elastic band that held it in place, it was not very…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesSzaman

Antenna mount for Turnigy 9XR PRO

Antenna mount for Turnigy 9XR PRO

Pobrania
12
Polubienia
1
Ocena
0
P
Printableskamilice22

Budget rc long range transmitter antenna (Turnigy 9x)

Upgraded 2.4 Ghz Biquad Antenna antenna for Turnigy 9x transmitter. More info: http://maj.pavlin.si/ Category: R/C Vehicles

Pobrania
11
Polubienia
0
Ocena
0
P
Printablesgaspain

Turnigy 9XR FPV monitor folding mount

Visit my blog: http://kiloohm.com This folding mount is deigned to hold a 7" Haier TV with a 1/4" bolt like a camera. It also mounts a Moxon antenna from this thing: http://www.thingiverse.com/thing:1618714 Also in the pic is a folding…

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesDarkstar77

Turnigy Hex Screwdriver Handles

I've owned this set of Turnigy hex screwdrivers for well over a decade. They work fine for smaller projects, but when I'm using them on a bigger project, like building a printer, the handles really bother me. They're too small, and my…

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesJaegermeister

Turnigy hex holder

This is a simple tool holder for a Turnigy hex driver. Print Settings Printer Brand: TEVO Printer: Tarantula Rafts: No Supports: No Category: Tool Holders & Boxes

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesPonyOny

Turnigy Evolution 200RC FPV Mount

Remixed this two designs to fit my necessities, I wanted to be able to attach the 200RC FPV watch screen to my Turnigy Evolution. Remezclando estos dos diseños para satisfacer mis necesidades, quería poder acoplar la pantalla del reloj…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesSchlachtkreuzer

Turnigy_9XR_PRO_FPV_Holder

A FPV 7" LCD Screen holder for the Turnigy 9XR PRO radio controller. -25mm length of the cylinder on top and enough space for the fingers to grab the radio -5mm thikness Print Settings Printer: FABtotum Rafts: Yes Supports: Yes…

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesjassca

Turnigy TGY-i10 Gimbal Saver

Needed a gimbal saver for the i10, and didn't see one on Thingiverse yet. I printed it in TPU but presumably other materials would work Category: R/C Vehicles

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesBenny

10x52 Spool Adapter / Turnigy Fabrikator

Customized version of http://www.thingiverse.com/thing:735213 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=735213 Instructions Using the following options: arm_thickness = 2.4 tube_diameter = 10…

Pobrania
7
Polubienia
1
Ocena
0
P
Printablesburykot

B'Struder Extruder for Turnigy Fabrikator Mini V2

Remix of Tempo502's B'Struder for use with the Turnigy Fabrikator Mini 2. The remixed Arm accepts a 2/4mm PTFE tube in the filament path, it also uses original Fabrikator extruder spring. I was able to print with flexible materials (TPU)…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesTechSpiderbot

Turnigy Neutron 80W charger (housing)

Created new housing for Neurton 80W charger as the housing started to get oil-ish and sticky. An common issue with older soft-touch rubberized coatings. https://hobbyking.com/nl_nl/turnigy-neutron-80w-dc-touch-screen-charger.html

Pobrania
3
Polubienia
0
Ocena
0
P
Printablesaalejandrovr24

Turnigy 9x Receiver Holder

This is a receiver holder and protector for the Turnigy 9X Receiver, it holds the receiver, fits perfectly by pression, no need screws, use a belt for mount it. Thank you for leaving your positive comments, like and share that would help…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesJorge Nunez

TAMPA TURNIGY 9X - COVER

TAMPA TRASEIRA DO RADIO CONTROLE DA MARCA TURNIGY 9X

Pobrania
2
Polubienia
0
Ocena
0