P
PrintablesJon Gulbani
Baphomet Statue - Easy to Print Luciferian Diety Freemasonry
Found this awesome print at: https://www.thingiverse.com/thing:5008465 Nothing to it but to do it.
- Pobrania
- 990
- Polubienia
- 112
- Ocena
- 5
Wyniki wyszukiwania: uci
485 modeli
P
PrintablesShakeTheFuture
Silicon Carbide Crucible Mold
New molds, much better: https://www.printables.com/model/1185152-new-better-crucible-molds-for-microwave-metal-melt There are 2 different size molds. I print them in PLA 20% infill. The Lid and inside cups should be printed @0.16 mm layer…
- Pobrania
- 726
- Polubienia
- 129
- Ocena
- 5
P
PrintablesAudi
Disenchantment - Luci
I wanted 2D Luci wall art which included the whites of the eyes. I couldn't find any, so here we are! I've included two poses: "Luci" and "Luci Looking Back" Category: Decor
- Pobrania
- 125
- Polubienia
- 28
- Ocena
- 4,67
P
PrintablesSmoothDragon
Santa Lucia Crown
I was unhappy with how heavy and awkward our Santa Lucia crown was. This was my attempt at making a lighter weight crown that was fun to wear. I have nine lighted loops to keep the same symbolism as the nine candles in a Santa Lucia…
- Pobrania
- 89
- Polubienia
- 25
- Ocena
- 0
P
PrintablesDeniz
LucidVR ESP32Wroom 38pin Wrist Mount
A Wrist/ Arm mount which is bended so it fits my arm ( when mesured with calipers 68mm in diameter. ) The Idea is from MrLawr3nce on Thangs:…
- Pobrania
- 66
- Polubienia
- 1
- Ocena
- 0
P
Printables3DHippo
Globus cruciger
With carnival around the corner, I decided to dress up as a king, and every good king needs a globus cruciger to hold elegantly in one hand. For a successful model you need: 1x "globus_cruciger.stl" 1x "cross.stl 2x "stone.stl" The…
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDanAndersen
Universal Z-Motor Mount with F9-20M Loadreducing on Steppermotor Shaft
Ender 3, CR10, Sunlu S8 and many more printers have 2040 or 4040 extrusion bars on which the z-axis stepper motors are attached. This univeral mount does: Allow you to align the distance beweetn the stepper motor and the z-axis (common…
- Pobrania
- 38
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFierybattlehawk
PBB8-0147 & ESP32 Arm Mount for LucidVR Gloves
A arm mount to hold the cheap PBB8-0147 powerbank found at your local Five Below or on Ebay. Oh, and the ESP32 itself! Intended for the LucidVR VRGloves to power the unit without adding extra weight on the hand and wrist. Designed to…
- Pobrania
- 37
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRob Beast (All Things STL)
Honey Comb Wall remixes and introducing my Screw Wall!!!
Honeycomb Wall parts I designed, I also created my own Screw Wall that is much stronger and many more available tool holders (over 300) check it out! Thanks for looking. Screw Wall now has over 50 Club subscribers! I also have created…
- Pobrania
- 42 884
- Polubienia
- 16 006
- Ocena
- 4,94
P
PrintablesAJK
Introducing the Ultimate Portable Rotatable Data Cable Organizer Storage Box!
Tired of untangling a web of wires every time you need to charge your devices or connect peripherals? Say hello to the solution that will revolutionize your cable management – The Ultimate Portable Rotatable Data Cable Organizer Storage…
- Pobrania
- 9397
- Polubienia
- 1924
- Ocena
- 4,76
P
PrintablesChris Borge
Lucida 3D (Portable Camera Lucida)
Camera lucida. the 200 year old optical device used to create accurate images before cameras existed. Brought back into the spotlight by Pablo Garcia over a decade ago I learnt about the tool for the first time a couple of months back.…
- Pobrania
- 2632
- Polubienia
- 743
- Ocena
- 4,25
P
PrintablesOpenFigure3D
Crucifix - DOORS Roblox item
Crucifix - DOORS Print this suuuper easy miniature of the Crucifix, an item from DOORS, a ROBLOX horror game developed by LSPLASH and RediblesQW. Scale up in Z (turn off uniform scaling) to make it thicker. Thank you for printing our…
- Pobrania
- 1209
- Polubienia
- 51
- Ocena
- 5
P
PrintablesCarlRoos
DJI Avata 2 Bumpers - Remix from Kucici
This is a remix of the great DJI Avata 2 bumpers from Kucici. I did make a slight modification which prevents having to use cable ties. I simply added a lip to the bottom support which allows the bumper to clip perfectly in place and is…
- Pobrania
- 1146
- Polubienia
- 66
- Ocena
- 5
P
Printables[email protected]
Lucius Pattern Lasgun No.98 Full Size Prop
UPDATE: A maker asked if there were mounting brackets. I was just in the process of finishing up. So, here they are. A wall mounting bracket system and table display system - uploaded to the thing files. Your feedback really helps. Thank…
- Pobrania
- 1118
- Polubienia
- 205
- Ocena
- 5
P
PrintablesJeard
Elucidator Sword SAO
Es Espada de Kirito del anime Sword Art Online, modelo completo de la espada para imprimir por partes Primero se recomienda imprimir todas las piezas y luego ensambrar usando los conectores, se puede agrepar pegamento para que las piezas…
- Pobrania
- 1049
- Polubienia
- 241
- Ocena
- 5
P
PrintablesKyleMc
Cruciform Key - Mission Impossible Dead Reckoning
- The Cruciform Key - Added a version of the keys cut in half for printing flat. *EDIT* Update 20/08/23 Changed the model to reflect screen accuracy based on new images!
- Pobrania
- 1048
- Polubienia
- 73
- Ocena
- 4,67
P
Printablesdilofosauro
lucifer morningstar as a duck( hazbin hotel )
lucifer morningstar from hazbin hotel but as a duck
- Pobrania
- 999
- Polubienia
- 152
- Ocena
- 4
P
Printablesvoidbubble
Pellucid Sweep (Tealight holder - vase mode)
A mystical loom weaves resplendent spiraling pleats from the very fabric of light. Open source version of https://cosmicjubilee.com/designs/pellucid-sweep/ - available to buy now! A tealight holder whose base gradually develops into a…
- Pobrania
- 902
- Polubienia
- 198
- Ocena
- 5
P
PrintablesPeter Farell
Crucifixion in Retz, Lower Austria - 1727
Crucifixion in Retz, Lower Austria - 1727
- Pobrania
- 754
- Polubienia
- 206
- Ocena
- 0
P
Printablescmh
Remix of UCI brake lever inclination tool
Check the brake lever inclination on a road bike that may be subject to the UCI's recent rules. Based on the official UCI version, modified for faster and easier printing with less waste. Information on the UCI original at the bottom of…
- Pobrania
- 745
- Polubienia
- 50
- Ocena
- 5
P
PrintablesFotis Mint Studios
Lucio - Overwatch
If you like my work and want to support me bringing you new content please consider supporting me on Patreon https://www.patreon.com/FotisMint I give you Lucio from Overwatch. This specific skin is called hippityhop. Ribbit skin is the…
- Pobrania
- 704
- Polubienia
- 114
- Ocena
- 5
P
PrintablesZainX.Y.X
Dummy 13 Doom Crucible
The Doom Crucible from Doom Eternal is now in the hands of the Dummy 13.
- Pobrania
- 694
- Polubienia
- 151
- Ocena
- 0
P
PrintablesConcreteHead
Lucifer Morningstar (DC) Tom Ellis
This time i tried to use some led light with this bust. There are 2 ways to accomplish that. First is to print the front of the head in red transparent resin with a resin printer of your choice. I used my SL1S and it looks quite good.…
- Pobrania
- 689
- Polubienia
- 103
- Ocena
- 5
P
PrintablesFRAMKZ
CRUCIFICO
Para este modelo se recomienda imprimirlo a una altura de capa fina para conservar los detalles.
- Pobrania
- 601
- Polubienia
- 71
- Ocena
- 0
P
PrintablesReProps
Doom Crucible Saber Hilt
fits a standard lightsaber hilt, i made a blade from acrylic to fit mine, could probably print one for it if you wanted. Category: Props
- Pobrania
- 539
- Polubienia
- 89
- Ocena
- 5
P
PrintablesTheRustyFox
The Crucifix Patch - Murder Drones
This is the Crucifix Patch. It is a device from "Murder Drones." The show was created by "GLITCH" on YouTube, and they recently released episode 7 "Mass Destruction." SPOILERS In the episode, we are introduced to the Crucifix Patch or…
- Pobrania
- 538
- Polubienia
- 82
- Ocena
- 5
P
PrintablesChris Borge
Basic Camera Lucida
A basic camera lucida, made with just 4m2 bolts, a piece of glass and mirror and a stand of your choice. mirror: 1.5mm thick, 35*49.4mm glass: 1.2mm thick, 49.4*49.4mm Dimensions based off a set of slide glasses I had. The “lamp…
- Pobrania
- 520
- Polubienia
- 77
- Ocena
- 5
P
PrintablesDom
Luci - Disenchantment (multi-material)
This is Luci from Disenchantment ). He's a cute little cat like demon which inspired me to print him. This is my first attempt at remixing something for multi-color prints either on the well known Prusa MMU2.0 or Mosaic Palette . You…
- Pobrania
- 497
- Polubienia
- 127
- Ocena
- 4,5
P
PrintablesLucas7010
Grucifix (ghost band) - Keychain
This is a simple keychain with the Grucifix from the ghost band. I recommend using at most a 0.4 nozzle. Everything large might not work ! Works well with TPU if you want something flexible! It is 30mm wide and 47.25mm tall. The hole is…
- Pobrania
- 496
- Polubienia
- 64
- Ocena
- 5
P
PrintablesHuMa
Gridfinity 2.5 '' SSD and HDD Box (Crucial, Hitachi, Intenso, Samsung, SanDisk, Seagate, Toshiba, etc.)
Gridfinity Boxes to store up to 12x 2.5 '' SSDs and up to 10x 2.5 '' HDDs. There are different Sizes of boxes for different amount of SSDs and HDDs to fit your needs. Sizes The first number set is the size of the Gridfinity Box. There are…
- Pobrania
- 464
- Polubienia
- 81
- Ocena
- 5
P
PrintablesMikeTheSuperDad
Elucidator Sword SAO
Introduction This sword was created in Fusion 360 based off several different images of the original sword. Measurements were taken from descriptions of replica swords for sale online. The blade is approximately 8.5mm thick. The blade…
- Pobrania
- 416
- Polubienia
- 75
- Ocena
- 0
P
PrintablesSteffen Moeller
Ender 3 pro/S1 pro feet - Reducing noise and are anti vibrating
Nice and soft feet for your Creality ender 3 pro or Creality ender 3 s1 pro. This is version 3 of 5. This is the best of the feet I made. I used: TPU98A medium soft infill 10%. TPU 85A soft 20% infill. Nozzle 0.4mm Layer height 0,2mm Do…
- Pobrania
- 406
- Polubienia
- 60
- Ocena
- 5
P
PrintablesKutte
Lucifer Skull / Luzifer Schädel
Lucifer Skull Model with Stand Collection: BadAssGodCollection (more in progress) Printed on: Prusa MK4 and Bambu P1S Material: PLA Scaleable: Yes Supports: Yes (organic / plate only) Background: Culture: Christian & Western Mythology…
- Pobrania
- 400
- Polubienia
- 123
- Ocena
- 5
P
Printableslitlnemo
Japanese garden book nook by Luciagar
Luciagar's cute Japanese garden book nook from Thingiverse. See the Thingiverse page for more information including sources that Luciagar remixed!
- Pobrania
- 378
- Polubienia
- 188
- Ocena
- 0
P
PrintablesDan10105
Mexican Monument to the Revolucion - Monumento a la Revolucion
The Monument to the Revolution The Monument to the Revolution (Monumento a la Revolución) is a structure initially intended for another purpose (as a legislative building), but eventually became a monument to the Mexican Revolution…
- Pobrania
- 373
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRomanscan
Lucifer Gothic Mask
This Gothic-inspired Lucifer mask creates a dramatic and dark atmosphere. With meticulous craftsmanship, it features sharp contours, curved horns, a striking pentagram, and intricate filigree patterns. The mask's gothic wings and intense…
- Pobrania
- 348
- Polubienia
- 84
- Ocena
- 5
P
Printablesfabio loparco
Hose Barb Hosetail Straight Reducing Reducer Adapter Transfer 10mm-6mm
This is a 3D printable model of a pipe reducer designed to connect two irrigation pipes of different diameters: 10mm and 6mm. The reducer ensures a secure and leak-proof connection, making it ideal for gardening, agricultural, or other…
- Pobrania
- 331
- Polubienia
- 24
- Ocena
- 4
P
PrintablesAnton Kаn
Crucifix Jesus Christ Silhouette Wall Art
Crucifix Jesus Christ Silhouette Wall Art
- Pobrania
- 327
- Polubienia
- 31
- Ocena
- 0
P
Printables[email protected]
Lucius Pattern Lasgun Spike Bayonet Full Size Prop
Here is the companion bayonet to the Lucius Pattern Lasgun No.98 Full Size Prop https://www.thingiverse.com/thing:6089764 If you downloaded the Lasgun, you do not need to download the keys. If not, I included a set in this design. All…
- Pobrania
- 323
- Polubienia
- 55
- Ocena
- 5
P
PrintablesMikhail Babarinow
Сatcrucifix
If there is too little filament on the coil, it is pointless to print a large model. And it's a pity to throw away the leftovers, too. But you can print such a trinket as a gift or just for your own pleasure. P.S. When printing this…
- Pobrania
- 316
- Polubienia
- 109
- Ocena
- 5
P
PrintablesgEsFM
Rose with a name (Anna, Jana, Veronika, Vlasta, Petra, Niki, Lucie, Miriam)
Rose with a name (Anna, Jana, Veronika, Vlasta, Petra, Niki, Lucie, Miriam)
- Pobrania
- 313
- Polubienia
- 24
- Ocena
- 5
P
Printablesyo_vlad
Mini/Lucky/Dummy 13 Crucible (Doom Sword)
Mini/Lucky/Dummy 13 Crucible (Doom Sword) No supports required I recommend using below 0.2mm layer height but 0.2 is decent too. If you want a cooler surface finish then enable ironing. Use 100% infill for the Mini 13 Version since it's…
- Pobrania
- 312
- Polubienia
- 53
- Ocena
- 0
P
PrintablesSt.Clair
Doom Eternal Crucible Sword
Crucible sword from Doom Eternal, pre-cut for ease of printing, pin system has unique key'ing to ensure correct assembly orientation. This revision now has larger spacing for the bottom section of the blade to slot into the hilt and an…
- Pobrania
- 298
- Polubienia
- 38
- Ocena
- 4
P
PrintablesHans Klepitko
Modular Vibration-reducing Legs with Antishock Sock
Hello to the community! The Modular Vibration Reduction Leg is designed to enhance the stability and quietness of your 3D printers and other vibration-producing devices. I strongly suggest printing the cat springs and optional socks using…
- Pobrania
- 296
- Polubienia
- 281
- Ocena
- 0
P
PrintablesTs3D
Disenchantment 2d Luci
2d model of Disenchantment character
- Pobrania
- 294
- Polubienia
- 52
- Ocena
- 5
P
PrintablesFernando Villa Glez
Keychain Name Aire, Alla, Alma, Andros, Anton, Avril, Conchi, Dante, Gini, Gonzalo, Heber, Iria, Jorge, Lucia, Loqui, Mario, Mipi, Miguel, Monica, Noemi, Paloma, Solvia, Susana, Tiago, Valeria, Xurxo
Kingroon KP3S Printed with 0.4 nozzle, layers 0.2mm, 100% infill. Filament PLA BASICO fron Ctrol 3D in several colours. Yellow thick 2mm, black 1mm and white 0.8mm. Impresora Kingroon KP3S Boquilla 0.4mm, capas 0.2mm y relleno 100%.…
- Pobrania
- 288
- Polubienia
- 23
- Ocena
- 5
P
PrintablesMylerMaker3D
Cruciform Key - Mission Impossible 7: Dead Reckoning Part 1
Separate key and gem models now available, just download “ MI7CruciformKey_NoGems_WHITE ”, “ MI7CruciformKey_NoGems_WHITE ” & “ key gem ”.
- Pobrania
- 279
- Polubienia
- 25
- Ocena
- 0
P
PrintablesVariety_Dragon
Obey me! Lucifer horns Full and split
Horns for my Lucifer cosplay. Both full horns and pieces. I used plasticweld to glue them together and then soldered the seams. I sized them up to 650% They will be quite small when brought into the slicer.
- Pobrania
- 279
- Polubienia
- 70
- Ocena
- 0
P
Printablesgeorgmierau
Ghost Grucifix Rite Here Rite Now
An hommage to the tombstone in the form of a grucifix from the cover of the “Rite Here Rite Now” soundtrack. The dimensions are 223×150×15 mm. There are a “damaged” as well as a thin (228×150×8 mm) and a thinner (no border, 215×142×5 mm)…
- Pobrania
- 278
- Polubienia
- 32
- Ocena
- 5
P
PrintablesBEST 3D
Gancio per battiscopa cucina
Consiglio di utilizzare PetG, ma li ho testati anche in PLA e funzionano benissimo Non è necessario nessun supporto.
- Pobrania
- 274
- Polubienia
- 17
- Ocena
- 0
P
Printablesfarin_cz
Globus cruciger (Royal Orb)
How to print Split (vertically) into two identical parts and then glue together (Mind that the hemispheres will be slightly different due and you probably get small visible edge) Or use organic supports and print as single piece.…
- Pobrania
- 270
- Polubienia
- 23
- Ocena
- 5
P
PrintablesDanielAlex
Star Wars Crucible Paladin-class Corvette
The Crucible is a Paladin-class Corvette which appeared in Star Wars: The Clone Wars. It was an Old Republic-Era ship, used by the Jedi Order to take Jedi Younglings on a journey to construct their own lightsabers. Dimensions Length Width…
- Pobrania
- 269
- Polubienia
- 44
- Ocena
- 0
P
Printablescmh
Prototype tool to measure UCI mandated 10 degree maximum brake lever tilt
UCI's own version has been released! The same day I posted this I got the link for UCI's own version: https://www.uci.org/equipment/bh2JJzw1eB0n876rX2iB1 This will take you to the “Equipment” page. Scroll to the bottom and expand “UCI 3D…
- Pobrania
- 258
- Polubienia
- 21
- Ocena
- 5
P
PrintablesLeBaum
Elucidator SAO
A model of Kirito's Elucidator from the anime Sword Art Online
- Pobrania
- 249
- Polubienia
- 25
- Ocena
- 0
P
Printables[email protected]
Lucius Pattern MK22c Krieg Engineer Shotgun Full Size Prop
A maker reached out to ask if I'd considered making a prop recently - this Lucius Pattern MK22c Shotgun used by Krieg Engineers. Modeled and built along similar lines to the Lasgun. The source material and artwork on this is scant. I did…
- Pobrania
- 247
- Polubienia
- 62
- Ocena
- 5
P
PrintablesPeter Farell
Voronoi Crucifix
Voronoi Crucifix Hole in bottom to remove supports. The .obj file has no hole if that is needed.
- Pobrania
- 235
- Polubienia
- 80
- Ocena
- 0
P
PrintablesJohination
Doom Crucible Split (remix) - Better print!
I noticed that the model does not lie properly on the ground and that many filigree supports are necessary. so I realigned it, smoothed it out a bit and extruded the last few millimeters of the model down. my print settings: Rafts - Brim:…
- Pobrania
- 231
- Polubienia
- 57
- Ocena
- 0
P
PrintablesStefano Andrianopoli
Adjustable Height Support Cabinet Leg Piedi Cucina
I few days ago I realised that my kitchen has all cabinet legs broken (I have no idea how it is possible these have gone broken considering this should not be a consumable). Unfortunately I can stay with my fridge balanced precariously,…
- Pobrania
- 229
- Polubienia
- 43
- Ocena
- 4,5
P
PrintablesAdafruit
Overwatch Lucio Blaster
Overwatch Lucio Blaster by Adafruit This is a preview release, more detailed build instructions coming soon. Build your own working Lucio blaster with background music, sound effects, and lights!…
- Pobrania
- 227
- Polubienia
- 162
- Ocena
- 0
P
PrintablesPeter H
ADAPTER - 50mm VACUUM to 27 mm FESTOOL REDUCING SLEEVE
A simple adapter to connect a 50mm (two inch) shopvac style vacuum cleaner to any Festool tool with a 27mm dust connecton. Shown is a Festool Domino. Note this requires a Festool Anti-Static Reducing Sleeve to 36mm/27mm (498528) which is…
- Pobrania
- 218
- Polubienia
- 45
- Ocena
- 0
P
Printableszorzal
FRESH - Friction-REducing Spool Holder for BL Mini A1
If you print TPU with the A1 Mini, the softer the TPU you use, the higher the chance that friction will stretch your filament on its way into the extruder, and that will result in under-extrusion. This will happen even if all other…
- Pobrania
- 216
- Polubienia
- 23
- Ocena
- 5
P
PrintablesMonsieur-Pierre
Jesus Christ on the Cross – Christian Crucifix
💖 Support Me If you like this model and want to use it for commercial purposes, you can support me on Patreon and get a commercial license: https://www.patreon.com/cw/MonsieurPierre Detailed 3D model depicting Jesus Christ on the Cross,…
- Pobrania
- 211
- Polubienia
- 21
- Ocena
- 5
P
PrintablesViajante3d
Pokemon Charmander y sus evoluciones
¡Prepárate para llevar tu pasión por Pokémon al siguiente nivel! Presentamos una colección exclusiva de archivos STL con las siluetas de tus Pokémon favoritos y sus evoluciones, diseñada especialmente para coleccionistas y aficionados de…
- Pobrania
- 210
- Polubienia
- 130
- Ocena
- 0
P
PrintablesJason H.
30mm scope rings to 1" scope reducing insert
Just a simple insert to reduce 30mm rings to a 1 inch scope. you will need to print 4. Just slip them between the rings and scope. Print Settings Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: your choosing. Infill: your…
- Pobrania
- 208
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLEN polygon
Noise-reducing Toolless Squash ball Feet for Prusa MK4 (3030 extrusion)
These Squash ball Feet will greatly reduce and dampen any sound, vibrations, and noise that your 3D printer normally passes onto the surface it's sitting on. Background In my case that was the Original Prusa Enclosure (OPE) which has the…
- Pobrania
- 202
- Polubienia
- 57
- Ocena
- 5
P
PrintablesISuckAtChoosingNicks
Crucifix flat bottom
This is a remixed version of the Crucifix from Ardesi_Marco. I added a flat bottom to it, as it was lacking one. Category: Sculptures
- Pobrania
- 200
- Polubienia
- 16
- Ocena
- 5
P
PrintablesNRDesign
Doom Crucible Split (remix)
This is a remix of the Doom Crucible file uploaded here( https://www.thingiverse.com/thing:3007342 ) by Electronic Chaos. I threw his model into mesh mixer and split it along the vertical axis, then made it solid and cleaned it up a bit.…
- Pobrania
- 199
- Polubienia
- 33
- Ocena
- 0
P
PrintablesDan Cooper
Lucius Malfoy's Cane Wand Wall Hanger
Model designed in Tinkercad, designed to pull the wand out, put the cane in the bottom and magnetically hang the cane from the wand. Yes, the magnets are STRONG ENOUGH. This will print happily without supports or brims, and 15% infill.…
- Pobrania
- 197
- Polubienia
- 12
- Ocena
- 5
P
PrintablesYOKOZO
Confucius – Paint-It-Yourself
A blank, matte-white model inspired by Confucius, the revered philosopher of wisdom and virtue. This DIY collectible reflects calm thought, tradition, and moral clarity in a smooth, minimal form—ideal for thoughtful painting and…
- Pobrania
- 193
- Polubienia
- 35
- Ocena
- 0
P
PrintablesDragonArtist15
Confuciusornis Figurine
1:1 Scale model of a confuciusornis, a small bird-like dinosaur The files are pretty large, they may take a while to load. The 1:1 scale model is split to fit a 300mm cubed print volume. If you are using a smaller printer, the files will…
- Pobrania
- 191
- Polubienia
- 43
- Ocena
- 5
P
Printablesyurshevich
KREG Level-Loc Reducing Rings for Router Table Insert Plate
The model shows the designed size of the holes. Actual size may vary slightly due to different shrinkage of materials used. Printer brand: Flying Bear Printer: Ghost6 Rafts: No Supports: No Resolution: 0.2 Infill: 100% Filament brand:…
- Pobrania
- 189
- Polubienia
- 18
- Ocena
- 5
P
PrintablesThe Rookie
Roblox DOORS: Crucifix
Its the crucifix form doors :D
- Pobrania
- 189
- Polubienia
- 13
- Ocena
- 0
P
PrintablesBasementLAB
Plinth Clip for kitchen legs - Universal Kitchen Clog Hook Clip - Gancio per zoccolino cucina
Universal Clip / Hook for Kitchen Clog - Hook Clip for Plastic Clog Feet and Aluminium Clog - Clip for kitchen base - Plinth Clip for kitchen legs - Gancio per zoccolino cucina - Molletta tamponamento cucina Resize/Scale to adjust…
- Pobrania
- 184
- Polubienia
- 31
- Ocena
- 0
P
PrintablesRamon Angosto Artigues
Maze knifes - Lucifer
This karambits are inspired in the ones used by Maze in the Lucifer tv show. This karambits where printed in bq black PLA. Print Settings Printer: Mendel Max xl Rafts: No Supports: No Resolution: 0.4 Infill: 10% How I Designed This I…
- Pobrania
- 183
- Polubienia
- 24
- Ocena
- 0
P
PrintablesVeryRoomy
Chrollo Lucifer Earrings
Earrings that can go over your earlobes just like our boy in the show. Print the ring portion in gray and the globe in blue by adding a filament change at that layer height within PrusaSlicer. USE VASE/SPIRAL MODE AT <.1mm Layer Height…
- Pobrania
- 181
- Polubienia
- 12
- Ocena
- 0
P
PrintablesAreJay
LUCIFERS STAFF WITH APPLE COLLAPSIBLE
Hazbin Hotel's Lucifers staff collapsible, the pegs are to be put put into the apple parts, once you put the sword toget
- Pobrania
- 178
- Polubienia
- 19
- Ocena
- 0
P
PrintablesBrite Minis
Trurl and Klapaucius (supportless, FDM-friendly)
To celebrate the 100th anniversary of the birthday of Stanisław Lem, a famous Polish science-fiction writer, here are Trurl and Klapaucius, constructors, friends and rivals, the protagonists of the Cyberiad, one of my favourite books.…
- Pobrania
- 173
- Polubienia
- 25
- Ocena
- 5
P
Printableslixielabs
LumenPNP Secondary Fiducial Rig
This modified version of the Datum PCB mount allows for 3D calibration using a second fiducial mark! You can find the necessary PDF for the second mark on the OpenPNP wiki here:…
- Pobrania
- 172
- Polubienia
- 12
- Ocena
- 0
P
PrintablesModel Magic
Lucifer - Mazikeen Maze Smith - 2016-2021
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 171
- Polubienia
- 24
- Ocena
- 0
P
PrintablesThorin Oakenshield
Reducing adapter
Reducing adapter from 40mm to 3/8, 1/2, 5/8, 3/4, 1 Reducing adapter from 32mm to 3/8, 1/2, 5/8, 3/4, 1 Use Petg or other more durable filament For better strength, give more perimeters - 4-5 , and for adhesion to the printing plate, use…
- Pobrania
- 170
- Polubienia
- 70
- Ocena
- 0
P
PrintablesMstrDialUp
Hotend 40mm Fan Shroud with baffles (noise reducing)
The original model only claimed a -3dB decrease in noise. Edited the model to introduce some scalloping in the main intake barrel. My original replacement case fan clocked in at a whopping ~70dB at about 2 inches and 60dB at the desk 3…
- Pobrania
- 169
- Polubienia
- 15
- Ocena
- 3
P
PrintablesModel Magic
Lucifer - Chevrolet Corvette C1 Convertible Triple Black (1962) - 2016-2021
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 168
- Polubienia
- 29
- Ocena
- 0
P
PrintablesBlue
Crucifixes from Roblox Doors
I made it with multicolor, it looks much better that way. Should I make a curious light crucifix?
- Pobrania
- 165
- Polubienia
- 15
- Ocena
- 5
P
PrintablesPeter Farell
Boba Fett Hallucinogenic Lizard and Basket
Boba Fett Hallucinogenic Lizard and basket Modeled from movie stills. New Thicker Model uploaded 1/8/2022 at 8:35am Old model had drop outs in wicker and files were removed.
- Pobrania
- 164
- Polubienia
- 41
- Ocena
- 5
P
PrintablesCarlos Gimenez Sanchez
Crucifijo
Medidas (mm): Ancho: 80 Largo: 130 Grosor: 10
- Pobrania
- 164
- Polubienia
- 11
- Ocena
- 0
P
PrintablesRamon Angosto Artigues
Luci disenchantment
Lucille Lucifer Jr. DCLXVI, Son of Satan, better known as Luci is the deuteragonist in Disenchantment . He lives in Dreamland, is Princess Bean's "personal demon", and was the owner /bartender at Luci's Inferno . He was voiced by Eric…
- Pobrania
- 161
- Polubienia
- 14
- Ocena
- 4,5
P
Printablesphosphor418
Mac Mini M4 base for Crucial X10 Pro SSD
Hi! I'm sharing my solution to hide my external Crucial X10 Pro SSD used with my Mac Mini M4. I made it so I still have access to the infamous power button. The bottom vents are enough for it to not overheat. There is small pegs…
- Pobrania
- 159
- Polubienia
- 28
- Ocena
- 0
P
PrintablesModel Magic
Lucifer - Lucifer Morningstar - 2016-2021
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 152
- Polubienia
- 24
- Ocena
- 0
P
PrintablesCoyfish
SAO Kirito Elucidator Sword Hilt
Printable hilt for Kirito's 'Elucidator' sword from the anime Sword Art Online
- Pobrania
- 147
- Polubienia
- 54
- Ocena
- 0
P
PrintablesNickyDoes
PandaPlacer A1 dual height fiducial fixture
Add this to your PandaPlacer A1 next to the up camera, and get full dual-level calibration abilities within OpenPnP. Follow the OpenPnP Issues & Solutions for the best possible calibration. Photo print a set of squares. Example file…
- Pobrania
- 147
- Polubienia
- 5
- Ocena
- 0
P
Printablesmariazuelo
Envases multifucion lapicero, jarrón
Envases multifuncion, tanto como lapicero, jarron o para almacenes cualquier tipo de elemento vertical, incluso destornilladores. Funcionales tanto en el escritorio como en el taller. Impreso en PLA Prusa
- Pobrania
- 146
- Polubienia
- 13
- Ocena
- 4,5
P
Printablesseasonwarez
Nightmare Fredbear - FNAF Hallucination Monster
"I have always been hidden in your shadow..." Bring the horrifying, clawed centerpiece of the nightmare animatronics to life with this high-fidelity, static-pose figurine. This model is a frame-accurate tribute to the towering,…
- Pobrania
- 140
- Polubienia
- 11
- Ocena
- 0
P
PrintablesHansK
Adapter set for D32/37 hose for Festool Reducing Sleeve D27/22 DM-AS/CT
PLA is fine for Adapter part. If used to endcap take extra care or it will easy snaps. PETG works great for endcap. Printet with no supports.
- Pobrania
- 138
- Polubienia
- 24
- Ocena
- 0
P
PrintablesPeda
Ghost Grucifix Pendant
I love this band and all the lore behind it so much so I just had to design this pendant. I based the size on the pendants the band members wear at gigs. I'm pretty sure the size is right but I can be wrong. It would help me on my way to…
- Pobrania
- 136
- Polubienia
- 12
- Ocena
- 0
P
PrintablesModel Magic
Lucifer - Detective Chloe Decker - 2016-2021
⚙ RECOMMENDED 3D PRINT SETTINGS Material: PLA or PLA+ recommended Layer Height: 0.16 mm for finer detail; 0.20 mm for faster prints Infill: 10–15% recommended for most models Wall Loops: 2–3 Supports: Enable where necessary based on model…
- Pobrania
- 134
- Polubienia
- 19
- Ocena
- 0
P
PrintablesBugman_140
Luci-BEAR Morningstar
Here is the model for Luci-Bear Morningstar. Luci-BEAR is a good Friend of Barry, and like his friend he wants to be your friend too, do you have space for Luci-BEAR? maybe he can keep Barry Company. I hope you enjoy, Thanks Bugman If you…
- Pobrania
- 133
- Polubienia
- 39
- Ocena
- 5
P
PrintablesSeweryn
Crucial X9 PRO SSD Mount - Universal
Crucial X9 Pro Mount – Secure, Stylish, and Practical SSD Attachment This dedicated mount for the Crucial X9 Pro SSD offers a functional and elegant solution for users who want to conveniently attach their external drive to a laptop or…
- Pobrania
- 126
- Polubienia
- 5
- Ocena
- 0
P
PrintablesVectorWorks
DOOM Eternal Crucible
The model is significantly shorter than the in-game Crucible (~60-65 in), coming in at ~36 in. I'm just not as big as the Doomslayer. This model is fully 3D-printable and has a threaded handle, but the other parts, like the blade and the…
- Pobrania
- 124
- Polubienia
- 27
- Ocena
- 0