Liczymy pasujące modele…
Intro Earbuds Cleaning Tool V2 is a small, easy-to-print earwax remover tool for in-ear headphones and earbuds . It helps you safely remove earwax, dust and debris from your earbuds without damaging the speaker mesh . The first version…
Wydruk około 0,10 €–0,12 € nettoWstępna wycena jednego wariantu
Enjoyed this model? Support me at buymeacoffee.com/fifindr to keep the designs coming! Say goodbye to dirty earbuds with the Earbuds Cleaner Tool ! This dual-sided design features a brush-like surface on one end for removing earwax and…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
3rd photo shows how it should be laid out. Takes similar inspiration from another shroud , but is designed around the shroud being remixed. Supports aren't needed, but it may look nicer if printed with ironed supports. If you're looking…
Wydruk około 0,64 €–0,78 € nettoWstępna wycena jednego wariantu
A remix of the Lightning connector based version from @stripetuning_193054 to accept the new USB-C connector.
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
Modular print head ASSY for Kingroon KP3S 3.0 with Titan Extruder and 4010/5015 fans. Notes on Model Files Please download just the STL file of the 5015 fan shroud from the “KP3S — Modular 5015 Fan Shroud — Kingroon” page. This 5015 fan…
Wydruk około 2,66 €–3,25 € nettoWstępna wycena jednego wariantu
if for some reason the control panel doesn't line up correctly you can cut a small bit off the bottom and sand it flat. i will be editing this in the future
Wydruk około 0,34 €–0,42 € nettoWstępna wycena jednego wariantu
This is an improved version of my previous model https://www.printables.com/model/659917-wired-earbuds-holdercase. Has a better grip, but has the same dimensions as the previous one. Ideal to store you wired eardbuds. Printed in PLA…
Wydruk około 2,66 €–3,26 € nettoWstępna wycena jednego wariantu
Easy to make a cute Clouds and Rainbow keychain I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No If you like my work consider Buy me a coffee 😊
Wydruk około 0,21 €–0,26 € nettoWstępna wycena jednego wariantu
احم سماعات CMF BUDS 1 الخاصة بك بهذا المكان! تصميمها المتين تحافظ على سماعات الأذن الخاصة بك آمنة من الصدمات والخدوش. لا تفوت فرصة الحصول على سماعات الأذن الخاصة بك الآمنة!
Wydruk około 1,20 €–1,47 € nettoWstępna wycena jednego wariantu
Lego City Curved Rail Normal Radius 40 studs new version Radius 56 studs for bigger curves Print instructions Printer Prusa XL Multihead Filament: PLA Print height: 0.2mm Nozzle: 0.4mm Support: Are needed at the ends
Wydruk około 1,48 €–1,81 € nettoWstępna wycena jednego wariantu
There are TWO versions of this one in the model section: Wired version, slide in and connect to a general usb c plug. I made this for a generic usb c plug, but they are different thickness so you might need to adjust the height of the USB…
Wydruk około 0,75 €–0,92 € nettoWstępna wycena jednego wariantu
The set consists of a wall mount and a rotating mounting plate for attaching a PreSonus Eris 3.5 Gen 2 loudspeaker. The mounting plate is designed to use as little material as possible while still ensuring that the loudspeaker is securely…
Wydruk około 3,23 €–3,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Earphone Lion Holder for Samsung Galaxy Buds 3 I designed a 3D print model of a lion, where you can temporarily attach earbuds to its ears. There’s a storage space for the charging case at the back. The model features a low-poly design,…
Wydruk około 3,50 €–4,27 € nettoWstępna wycena jednego wariantu
Wall art: Dragon in the clouds (four colours)
Wydruk około 3,74 €–4,57 € nettoWstępna wycena jednego wariantu
I wanted to mount my Ikea Fintorp draining rack without drilling into the walls, thus avoiding to damage pipework and tiles in my kitchen. Therefore, I got one set of these glue-on studs from tesa:…
Wydruk około 0,56 €–0,68 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Intro A super-simple 3D-printed cleaning tool designed specifically for earbuds and in-ear headphones . It removes accumulated earwax and debris quickly and safely, helping restore sound quality and hygiene — all with a very short print…
Beautiful designer organizer for cotton pads and sticks.
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
Galaxy Buds Case that snaps on. No glue or tape. It will fit Buds Pro, Buds Live, Buds2 and Buds2 pro, and Buds FE. I printed in PLA. 0.15mm QUALITY settings in Prusaslicer. Ironing for top layer only. Supports so it can be printed easily…
About I designed this cover to protect my new Buds 3 Pro case from scratches. It should also work with the normal Buds 3 since they are the same size. The cover has a snug fit and lets you access the case's functions. Print settings I…
Update 1.3: Tightened tolerances on stud shaft and hex head close to v1.1-1.0. Threads almost like 1.2. RackStuds - a strong™ threaded fastener. This two-part design aims to make 3D printed mini-racks a lot more fun and accessible by…
This model is compatible with the lego system.
Anti-Snoring Earbuds: a 3D printable solution for a better night's sleep. These earbuds are designed to fit comfortably and help reduce snoring, ensuring both you and your partner can enjoy undisturbed rest. Ideal for 3D printing…
Print in flexible filament. Mirror it for the other side.
The speaker enclosure has a volume of 4.5 liters and is tuned to 60 Hz. It features a triangular port design, eliminating the need for support structures during printing. Crossover: I designed my own crossover based on online…
A simple and fast print to help clean earbuds and phone charging ports. It features a textured side to help with grip, and the tools on each side are the perfect size for cleaning an earbud or getting dust out of a phone's charging port.…
E nder 3 and E nder 3 Pro Fan Silencer Shrouds for PSU These are fan silencer shrouds for the Ender 3 and Ender 3 Pro power supply fans . In the pictures, the Ender 3 shrouds are yellow and the Ender 3 Pro shrouds are purple . They attach…
Vase designed originally for the Flower Bouquet #10280. The added studs fit perfectly to normal lego bricks. The hole on the downside is for put in weight, it is made for 7x M10 Nuts. Settings: 4 Wall Lines 4 Bottom/Top Lines Infill: 20%…
This model is compatible with the lego system.
Ready to catch 'em all? Print your very own Pokeball case for your Samsung Galaxy Buds2/Pro/Live with my 3D printable file – it's a fun and creative project for any Pokemon fan! This cleverly designed 3D printable file allows you to…
The "Geos" are edgy, literally 😎 We've combined the sugary sweetness of the FDM5 top-end with an accurate and punchy mid-section and bottom end. If you're into critical listening, or even mixing and mastering, the FDMGeos are for you! The…
Compatible with: Extruder: M3202 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers M3204 - Micro Swiss NG™ Direct Drive Extruder for Creality Ender 5 / 5 Pro / 5 Plus Printers (Linear Rail Edition)…
This model is compatible with the lego system.
This model is compatible with the lego system.
Simple lid for JBL Wave Buds Easy to remove, you can shake off the lid when it's upside down.
This is a simple earring holder design with notches to hold hook earrings and holes for studs. The holes are also sized large enough that hook earrings can also hang from them.
EVA 3.0 chonky shrouds using 3x NeoPixel RGBW Mini Button PCB or WS2812B LED. LEDs are seated to point slightly below the tip of the hotend. Choose appropriate variant long or short according to your hotend. Long variants should be good…
I added a hole for the LED indicator, i also added the wireless charging symbol on the bottom side of the case and the text with the name of the product on the top. I recomend printing with PETG because PLA isn’t as flexible, the…
A 3D-printed Croc stud designed to fit seamlessly into Croc holes, with custom charms incorporated directly into the model. Ideal for adding personalized flair to your Crocs, the charm is integrated during the design, making each stud…
This model is compatible with the lego system.
Remix of existing model with rounder back portion, nicer rounder keyring loop, small lip to top half for easier opening and changed front LED hole to be circular. Print with supports in the inside ( see picture ) Also using this…
This model is compatible with the lego system.
It's easy to print, with brim and without supports. I recommend a 0.2mm layer height.
Made a huge Lego base plate using a LEGO SCAD I was lucky to find. It was made at the recommended height for a base plate but ended up a bit more flexible than actual LEGO. Can still be used and the actual LEGO and it does snap on to it…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
I printed it in the given orientation using 0.2mm layer heights and supports only from the build plate.
Second of my bathroom accessories series of 3D models in modern minimalistic design. I am presenting Cotton Buds dispenser / hodler. I printed it on Elegoo Neptune 3 Pro with 0.4mm nozzle in PLA+ using 0.2mm layer height, 15% cubic…
This model is compatible with the lego system.
This model is compatible with the lego system.
I tried to find earbud case, but finally designed my own. Print without supports. Please share you makes and consider donation. https://paypal.me/novatormaker https://revolut.me/onovator
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
V2 adds more material to support the walls.
This can holder is Lego-compatible – and brings fun to the table! The outer shell features real studs in an 11x5 grid that can be connected to bricks, brackets, or even other can holders. The integrated handle ensures comfortable carrying…
0.5 inches wider/deeper to accomodate slightly larger broom handles/cylinder diameters (made this one for a bike pump.) Made the screw anchor holes vertically aligned to easily anchor into a wood wall stud. Made the countersinks for a #8…
Dispenser for cotton buds for honeycomb storage wall. Zásobník na uchošťoury pro honeycomb storage wall.
This is our 3rd speaker design to date. We went way off-script with this loudspeaker, hoping to attract those with smaller build volumes and a desire for deep bass and excellent off-axis response. They pack the party animal of the FDM5's…
Product: Customized Ear Hooks for OnePlus Nord Buds Elevate your audio experience with our custom-designed Heat Bendable Ear Hooks for OnePlus Nord Buds. Created for comfort and a secure fit during workouts and travel, these PLA-printed…
Also check out the rest of my monorail designs, including motors, stanchion and track: https://www.printables.com/@cbrick/collections/2018360
This model is compatible with the lego system.
Developed in the summer of 2023, these 3D printed bookshelf speakers are our first attempt at properly meshing 3D printing and audio. We believe that we hit the mark! FDM5 Loudspeakers throw out an impressively wide soundstage and boast a…
This model is compatible with the lego system.
Simple, capacious (12 x 12 x 12 cm), 4 sections organizer for cotton buds and pads. To fight the mess in your bathroom :) I also attached some optional covers. Print instructions Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…
A case made for the CMF Buds pro 2 Very simple print, supports are only needed for the overhang near the knob on the upper lid. Category: Audio
This model is compatible with the lego system.
This model is compatible with the lego system.
Fan shrouds installing the Micro Swiss M2601 Direct Drive Extruder onto a Creality CR-10S Pro V2 or Creality CR-10 Max. The Direct Drive Extruder will work with both the shorter Ender-3 / CR-10 All Metal Hotend as well as the longer…
group of stl (remixes and originals) to decorate my kids' room all decors can be attached to the wall using hot glue all can be printed using pla and in different materials - we usually use spares ones pls note for grass you can use…
This model is compatible with the lego system.
A remix of the USB-C connector based version from @ChrisBoorman_136327.
Do you prefer wired earbuds because of their crisp mic recordings but hate the tangles? Search no more! This holder is designed to keep the earbuds and the mic in the central cavity, protecting them from impact while keeping the wire…
Just as it's stand in the title!
Printing Material: PETG for a more reliable snap latch and its better for outdoor use. Seam: exclude the seam away from the front, looks better. Assembly Its uses a filament hinge that can be pressed in and use Flush wire cutters to cut…
Update: February 27, 2026 The new Galaxy Buds 4 and 4 Pro have gone back to a clamshell-style case that's bigger than the old Buds 2 case by 1mm in every dimension (51x51x28mm). I've added a slightly larger version, but it's untested…
This model is compatible with the lego system.
A conversion kit for a Hawsan Airsoft Shotgun, to use APS Shells. Printing: All parts with 100% infill or 1x Shell Extractor 0.1mm (No supports, maybe brim) 2x Valve Pusher 0.1mm (Supports on Buildplate) 2x Chamber Sleeve 0.2mm (Supports…
A custom case designed for CMF buds Pro 2, with features: A lanyard hole A belt clip - but not for belt Physical protection I took advantage of the texture of the plate and printed top and bottom faces towards plate. I will suggest you to…
This model is compatible with the lego system.
This model is compatible with the lego system.
Allows for Pixel Bud Pro's Earbuds to stand on end.
This model is compatible with the lego system.
80mm fan shrouds 30mm tall with 90-degree air deflection. Walls are 2mm thick in most areas of the v1 model. Walls of v2 model are about 3mm thick and requires significantly less support. I made this for the cooling fan in the base of my…
This model is compatible with the lego system.
Decorative holder for cotton pads (60mm diameter) and buds. Inspired by ancient roman columns, with a 'broken' top for the ruined look.
This model is compatible with the lego system.
This model is compatible with the lego system.
⚠ This project is for Educational Usage Only ⚠ You can freely use this to work with LEGO Education like Mindstorm, Wedo and others This project is inspired by retired LEGO product - Triangle Ruler Item No: bb0342 Key Features: Bigger…
I recently went to treat myself a little bit and spent a little extra money for a new set of bluetooth earbuds. These WF-1000XM4 earbuds are amazing… and have the price tag to match (for a relatively broke university student, at least…
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
This model is compatible with the lego system.
I scaled the original woven planter file up to 120% (100mm tall) , but even if you don't this should still work. The cactus will just be larger in proportion and not sit as deep in the planter. The base piece can be printed in the…
![M3202 Ender-5 / 5 Pro / 5 Plus [Micro Swiss NG Extruder] - Fan Shrouds and Brackets](https://media.printables.com/media/prints/752863/images/5874787_8bffd4fb-4eb5-421b-88d9-65f5b8c4600b_20be6ab3-368f-446f-9baa-60e0dd019b02/4ngender5_2400x2400.webp)
![M2601 CR-10S Pro V2 / CR-10 Max [Micro Swiss Direct Drive Extruder] - Fan Shrouds](https://media.printables.com/media/prints/698885/images/5548157_c7549b92-7fcb-44ea-9ad1-861608b9eaeb_57d87105-28a0-4e7f-aad3-ed996f07f4f7/image2.jpg)
