Wyniki wyszukiwania: und

Under Desk Drawer

Also check the model out on MakerWorld for BambuLabs printers print-profiles! Update 6th May 2023: Thanks for the great feedback everyone that downloaded and made this model! I finally had time to make a new version. I've added a few…

Mega Extruder Rotation Visualizer Bundle

Inspired by Mikolas Zuza Link: https://www.prusaprinters.org/prints/10-extruder-rotation-vizualizer What you need: Super Glue 8x3mm Neodymium Magnet 3D printed Visualizer Montage: Just glue the magnet correctly in the center of the circle…

Cable Zip Tie Mount - Bundle

Electric Cable mounts, mounted using screws D=3mm or double sided tape. Perfect for multiple cables or bundles :)

Rounded Bottom Box with Lid

Box with a rounded bottom, for easier grip on small things, such as nuts or beads. Lid with a simple locking mechanism. Includes stand 3x3 and 3x4. Double size here.

Funnel for resin bottles by Anycubic, Elegoo, Geeetech, Siraya Tech and others // Trichter für Resin-Flaschen von Anycubic, Elegoo, Geeetech, Siraya Tech und andere

(Description in german below // Deutschsprachige Beschreibung folgt unten) Inspired by the design "Funnel and bottle base for Elegoo resin by antcam" (on Thingiverse) I designed a new, slightly modified version. Main difference is the…

Under-desk headphone holder

Simple under-desk headphone holder. Uses minimal material and is easy to attach with screws. Fits up to 30mm wide headbands. Print instructions: 3 perimeters Detect thin walls

Ice cream handle and drip guard for kids / Eis Handgriff und Tropfschutz für Kinder

Unfortunately, it is quite difficult for small children's hands to hold and lick delicious ice cream in summer. The melting ice cream drips, sticks and the sticks are very small and difficult to hold for long periods of time. With this…

Laundry Liquid cup holder for laundry soap

This is used to keep the liquid cup with the soap dispenser and prevent dripping. Should fit the standard laundry detergent dispenser. I printed mine at a 50deg angle with the sharp point cut flat and use supports to make sure it doesnt…

Dragon Wrapped Around Egg

Dragon on Egg: - Found a free Version of this mesh and Fixed for 3d printing. Also added UV textures to mesh. Sometimes the only way to fix models is to subdivided the mesh till its well over 3million tris and then go thorough the process…

Center finder (square/round)

Great center finder with a relatively tall fence and all corners have a relief. Works both on square and round stock. Print instructions Category: Parts Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No…

Monkey D Luffy Gear 4 Boundman

One piece Luffy Gear 4 ! Boundman version!

Präziser Filament Aufwickler (opt. Akkuschrauber und Motormodul) - Filament winder with opt. cordless screwdriver

Mit einer Kaffeespende könnt ihr meine Arbeit unterstützen: https://ko-fi.com/peopleware Danke :-) Für dieses Model existiert eine Version 2: PrecisionWinder NT: Gleiches Prinzip, aber einfacher - noch präziser und kompakter mit…

Round Shield for Dummy 13

This is a round shield for Dummy 13. It prints in two pieces, grip and shield. The 2 fit together with a press fit. (Maybe apply some glue since after a while it gets kinda worn out) The shield is about 48x48mm and 2.6mm thick (6mm in the…

The Perfect Center Finder (Square/Round) Remix

One of my hobbies is woodturning, and one tool that every woodturner needs is a good center finder. The Center Finder (Square/Round) by my fellow YouTube Maker, Marius Hornberger , is one of the best I have ever used. Unfortunately, the…

Cable tie - powerstrip holder for Multiboard ("Underware" cable management system by HandsOnKatie)

Click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.)

Hearts, Smiles & No Undies!

Small mechanical wound tracker / counter

A mechanical wound tracker / counter printable with 0.4 nozzle. It maxes out at 49 but is small enough, to have it on the battlefield near your operatives. Only one M3 x 8 screw is required for assembly. Some grease is recommended but not…

Schraubendreher Bit Box und Bithalter / Drill Bit Storage

Ich musste meine losen Sechskantschraubenbits organisieren. Deshalb entwickelte ich eine Box zum Sortieren von allen Schrauberbits. Diese Schraubendreher-Bit-Box kann im Deckel 100 kurze Bits aufnehmen. Im hinteren Bereich nochmals 40…

Wall mount for type 2 plug and Juice Booster 2 (electro mobility) - Wandhalterung für Typ 2 Stecker und Juice Booster 2 (Elektromobilität)

You can insert and remove the Juice Booster 2 from the wall mount without any tools within seconds. So you can easily take your charging cable with you, to be able to load your electric car on public loading stations and as well use it as…

Batteriespender für AA und AAA

Ich habe den Batteriespender auf thingiverse gefunden. Mir hat gefallen, dass da auch ein Deckel bei war. Den Spender habe ich mit Support gedruckt. https://www.thingiverse.com/thing:4752641

Everyday Comb in a Classical Rounded Shape

I'm thrilled to share my latest creation: the Everyday Comb, designed with practicality and a touch of elegance in mind. This working comb combines ease of printing with the comfort of daily use, featuring a classic rounded shape…

Apple Mac Studio Under Desk Cage with POWER BUTTON - Holder Frame

NEW MODEL 03/25 with POWER BUTTON on the front ! Improved model with mechanical POWER BUTTON extension on the front. An again improved and redesigned body for better print quality. Fits on building plates of all PRUSA Mk3,MK4, CoreOne or…

Segway Navimow i105e Messerteller für 6 Klingen und + 2cm Schnittbreite

Messerteller für den Navimow i series. (getestet auf einem i105e, sollte auch für den i108e passen) 6 Klingen und 20cm Schnittbreite (original hat 3 Klingen und 18cm Schnittbreite) Benötigt werden neben den Klingen und den Schrauben nur…

Round Labyrinth

9 circular Labyrinth, suitable for a ball with a diameter of 3mm, my record is 55 seconds so far, try to beat it! You can adjust it to the size of your ball Hand-made model in Prusa Slicer and Tinkercad, it is not a vector

Yet Another Fidget Infinity Cube Rounded - Smaller, Stronger and Tighter.

Printing Tips This model is sized for a 0.1 mm layer height anything more than that will probably fuse. The space between the model and the hinge is a single layer at 0.1 mm. If the hinges are sticking an adjustable wrench can provide…

House under construction in scale H0/HO and TT

I printed everything using 0.1 layer height and without supports . I recommend using fuzzy skin with the bottom part of the house with: fuzzy skin thickness: 0.3 fuzzy skin point distance: 0.3

Building Under Construction

Building Under Construction Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new. These models will help you do…

Aufbewahrung AA Akkus (HR6) oder AAA Akkus (HR03) Leer und Voll geladen Batterie box battery storage holder empty full charged

Find english version below... Box bzw. Behältnis zur Aufbewahrung von AA-Akkus (HR6) und/oder AAA-Akkus (HR03). Unterschiedliche Bereiche und Farben dienen der Unterscheidung ob die Akkus VOLL aufgeladen oder LEER sind. Die…

The Queen of the Underworld

Double Clip Cable Tie - Powerstrip Holder for Multiboard ("Underware" Cable Management System by HandsOnKatie)

Enlarged and modified version of @BobMcGlobus_870140 click connector plate for attaching power supply units or power strips to Multiboard with cable ties. (Matching the “Underware” cable management system from HandsOnKatie.) The original…

Building Under Construction - Elevator Shaft - Part 2

Building Under Construction - Elevator Shafts - Part 2 Buildings are damaged and destroyed in war. New ones are built on the bones of the old. People must live, work, and fight in the megalopolises. Hence the construction on the new.…

sound reducers for APOLLO 40mm airsoft silencer

riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG all'interno di APOLLO 40mm vanno inseriti 7 riduttori di suono. buon divertimento. MATERIALE: ECO-SMART PRINTOLOGIST

Building Under Construction - Cargo - Part 3

Building Under Construction - Cargo - Part 3 Cargo to make your construction site look in use. Ladders to climb to the next floor, control panels, safety fencing, barrels, and more. To add a Diesel Generator to the construction site:…

Smartphone and Tablet Stand with Charging Cable Support / Handyhalterung und Tablethalterung mit Ladekabelunterstützung

I was looking for a smartphone stand with the option to charge the smartphone while in the stand. Since I couldn't find one, I designed my own stand. The current stand is actually the 5th revised version. This version has a hole on the…

Under Desk Mounting Brackets - QUBE 500

These are some bracket designs for holding a Master Cooler QUBE 500 PC case to the underside of a desk. This is ideal for people like me, who have an already cluttered standing desk and don't like cables reaching to the floor. There are…

7,62x54r ammo box 50 rounds

The design was inspired from MizzrBear's design. This is not a remix

PET Bottle watering spike (Supportless). Prints in under 2 hours...

Printing and adding to your used PET bottle and watering your plants is easy. Update 3/19/2022: Added file with brim for those having bed adhesion issues. Update 3/22/2022: I added a file with a brim and spike with only one hole.

sound reducers for APOLLO 35mm airsoft silencer

riduttori di suono… semplici, leggeri, rapidi nella stampa, efficaci nel ridurre il suono emesso dalla tua ASG MATERIALE: ECO-SMART PRINTOLOGIST

Hygrometer Thermometer Stand - Simple Round

I bought a pack of 8 of these hygrometers for a filament dry-box storage project and had few left over. I wanted to have one of the leftovers out next to the dry-boxes to show the difference between inside them vs outside. So this is a…

Cricut under-table mat holder

A quickly made holder to store Cricut cutting mats under a table surface. Holds the standard sized 36mm x 33mm mats. I'm sure there is room for improvement (especially the centre joint), so included the STEP files for you to play with.…

Hyundai Ioniq 5 Centre Console Tray Organiser

Jdsfighter model gave us a great baseline design, but in the Australian version of the IONIQ5, the height of the rear part of the tray meant the cover wouldn't close. So we slightly tapered the design and also adding a few more…

Steinberg UR22C - Audio Interface - under desk mount

I remixed the mount to fit perfectly to the Steinberg UR22C - Audio Interface

Playground Roundabout for Playmobil

Hello! This is a simple playground roundabout or spinning wheel for the Playmobil kids, the design is inspired by the one displayed at the picture of the set 4015 . Check my other creations for the playground in this collection . It is…

Laundry Detergent Cup Drainer Larger Tray and Screw-on

After reviewing a few comments, it became clear to me that the new jugs not only had a larger diameter screw-on, but the cup was larger too. My wife likes to use the original small cup and I am guilty of not thoroughly investigating the…

Female / Woman / Girl and Greyhound Dog Ornament

A design i created in Fusion 360 based on a drawing i have seen online. Thickness 20mm Height: 163mm Width: 94mm Print Settings: Layerheight: 0.3mm Infill 10% Top / bottom layers (default): 4 I would modify the postion of the seam to be…

Slide-on Under-Shelf Tissue Box Holder

Store a tissue box under your cupboard, cabinet, bookshelf, or desk to free up space. No more fumbling around to reach the last few tissues deep in the box. With this holder's upside-down orientation, grabbing tissues becomes a breeze,…

🔘 Mechanical click switch (with click SOUND!) for usage in other models.

Info: original model by @kriswillcode is awesome, I just needed as small dimensions as possible, so it can be used in my other project note: i have used this in…

Super Accurate Heliochronometer Sundial - 2025 - Accurate to within 1 minute!

A remix of this model is available with added improvements & features. Check out: https://www.printables.com/model/1486576-heliochronometer-sundial-2026 A great deal of effort has gone into this design, so please consider leaving a like…

Big Round Bag Clip

The main publishing location for this model is on GitHub. Go to the GitHub page of this model for the latest updates, Blender source file, and more detailed instructions. Go to my site for an overview of my other models . Only a few of…

Snake Wrapped Around Crystal Ball

Snake Wrapped Around Crystal Ball

Toilet paper cat replacement spare roll cat friendly toilet animal - Klopapier Ersatzrolle Katze freundlich

It would be nice if you post your make. Thank you

Rake and shovel for little plants | Harke und Schaufel für kleine Pflanzen

Harke für das auflockern der Erde bei Indoor Pflanzen. Sowie ein Schaufel, mit längerem Griff.

Boob Under Control!

BOSE Soundlink Micro Speaker Holder

Normally the Bose Soundlink Micro lies flat on the table or strapped to something. This stand is for either to stand vertically as in picture or mounted to a wall e.g. in your workshop! Straight forward to print. 0.20 with 15% infill.…

Apple TV 5th Gen Remote Holder for Under Table or Wall Mount

Overview Hi everyone! This is a simple model I made that allows the Apple TV 5th Gen remote to be mounted to a table, wall, or anywhere else you can think of! It has two countersunk m4 holes to allow it to be screwed to something. I…

Beyblade Savior Valkyrie Bound DB Core - Higher Burst Resistance

The Savior Valkyrie DB Beyblade core bursts too easily due to the teeth and the shape of the driver opening. This fixes the problem. Adjusted the opening for the driver to be the size of a GT beyblade. Designed from scratch taking…

Under Cabinet Wine/Beer Glass Rack

This is a Wine/Beer glass rack that mounts under a cabinet or counter. Three glasses will fit easily. Printing Very easy to print, just make sure the large flat faces face down. Installation I included a drill guide so you can mark the…

A-10 Thunderbolt II scale 1-72

NOTICE: I realized after uploading that this needs to be flipped to have the GAU-8 on the correct (left) side. Remixed from MutherFluffer @MutherFluffr_3251745 design. https://www.printables.com/model/1309217-a-10-thunderbolt-ii also…

Laundry Detergent Cup Drainer Larger

The most recently purchased jugs of all® detergent have a larger diameter screw-on cap. My guess is they are standardizing with the rest of the industry as the new cap is the same size as OxiClean™ and several other bottles of various…

Under Cabinet Cutting Board Rack for IKEA LEGITIM

This is a cutting board rack designed to fit two IKEA LEGITIM cutting boards. The rack mounts under your cabinet with screws (though you could attach with mounting tape as well). It is two parts, both included in the attached 3mf file.…

60 Round Holder for Magpul Backpacker X-22

This is a partial remix of and inspired by u/along_for_the_ride11 's awesome BAK-1 100 Round Holder for Magpul Backpacker X22 that I purchased from them. I have received permission from them to share my variant. Please see HERE to…

Dual Colour Dice rounded (foldable)

This design of a fair (all sides have equal probability to be rolled), utilizes two prints with different colours, stackt on each other. All sides of the dice are printed flat on the print-bed and then folded into the final dice. Printing…

The Procrastinator 3000 - A Low Tech, Easy To Print, Failproof And Undetectable Mouse Jiggler

The Procrastinator 3000 is the simplest of mouse jiggler devices. Watch how it works: https://i.imgur.com/9lpT7iE.mp4 Features: Low cost and low energy consumption Usage is undetectable by any software Failproof design Very easy to print…

Asakusa Sensō-ji Temple Grounds - Tokyo, Japan

🇯🇵 東京へようこそ! ⛩ Welcome to Tokyo! Celebrate Ten Years of MiniWorld3D with an update to one of our first models. You'll need the free model for each featured building in this assembly, this entry is just the base platforms for each, they fit…

Rounded rectangle Hygrometer magnetic holder for Bambu Lab P1S

Hygrometer - https://amzn.eu/d/1nIj0yG Most of the Amazon ones are the same, as long as the dimensions are 48mm x 28.6mm Magnet - https://amzn.eu/d/4x4VSJl 3 x Magnet Size: Dia. 6mm x Height 3mm Hygrometer to be close to my plexiglass…

Bicycle airtag mount under bottle

The holder for the airtag is made of two parts without the need for screwing. Just insert the airtag and slide the parts on top of each other at a 60 degree angle, rotate and snap the latch. After that, just screw it under the bottle…

Aventon Abound Abus 4750XL Cafe Lock Bracket

If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…

Pod Dispenser (Dishwasher Laundry)

A simple and effective dispenser for laundry or dishwasher pods. Mounted to the wall with two screws or 3M Command strips. Supports on for the overhang in the mouth of the dispenser. I printed in PLA at 0.3mm Layer height, 2 Perimeters, 3…

Underdesk Drawer with Hexagonic Design

An under-desk drawer with a rail that can be mounted under your desk with screws or adhesives. There are 6 holes with a diameter of 5 mm on the rail part for screws, or you can use adhesives if you prefer. The drawer body may need some…

Under Desk Dual Laptop mount

A laptop under desk mount top shelf supports a 28mm laptop and bottom shelf supports a 30mm laptop. Has side cutouts to allow power and USB-C connections.

wire-haired dachshund/Rauhaardackel

Can be used as a keychain, car pendant or other decoration. Was by us for a colleague, where it is now hanging in the car. We printed it on the Prusa MK2 using the following settings: PLA (addnorth PLA) First layer 215° then 210° Heated…

Round 30 mm GAU A-10 Avenger threaded box

Threaded box with shape and size of 30mm round for Avenger

Mount for bicycle backlight under saddle

Mount for a small battery led backlight under your bikes saddle

Bose surround minimalist wall mount

I wanted a basic wall mount for my new speakers. Very easy to print and install. Got the bracket hooks to line up real snug to the speaker. No slop install using 2 x screw in wall anchors or screws directly into wall. Feedback and…

Roundabout Switching - X2

Double-sided roundabout switching rail compatible with BRIO and IKEA wooden rails. Printable without supports. Complete extended set contains: Straight Tracks Medium Straight Track - A Short Straight Track - A1 Mini Straight Track - A2…

Original Prusa i3 MK3 ENCLOSURE silent spool holder with bearings and tires / Spulenhalter mit Kugellagern und Reifen

***german version below*** I really liked the versatility and simplicity of the original spool holder design od the Prusa Lack enclosure. But it had two disadvantages. It was quite noisy and it streched flex filament quite heavily while…

Anker PowerPort Atom III Slim Charger Under Desk Mount

Desk mount for a Anker PowerPort Atom III Slim Charger to be mounted under the table. The main goal was a tight fit for easy cable plugging and unplugging without any wiggling. Edit I made this model because there was none when I first…

Rounded 6200 Ball Bearing

6200 Ball Bearing Very easy to print model with just supports for the balls but barely require's 1g of them. Grid supports works the best Sizeable but this is minium size for best use.

Bike - Ergon Under-Saddle AirTag Holder

Apple AirTag mount specifically for the Ergon QuickClick supported saddle. Saddles Ergon saddles with Topeak's QuickClick mount. Locate a threaded hole under the saddle to confirm. Installation Do NOT over tighten bolt and risk cracking…

Powersupply under desk mounting brackets

Halteklammern für Netzteile zur Untertischmontage. Anhand der Skizze können die Bemaßungen in Fusion 360 geändert werden (Breite und Höhe des jeweiligen Netzteiles) und die Konstruktion wird entsprechend angepasst. Bestes Ergebnis mit…

QRP Akkubox 12V und USB

QRP Akkubox 12V 4x 32700 Lifepo4 (natürlich auch kleiner Zellen wie 18650 oder 21700) BMS LifePo4 diverse M3 Schrauben 4x M3 Einschmelzmuttern 4x Anderson Powerpole 15A Quick Charge 3.0 USB Steckdose 12V Update: Mittelteil mit Breite 90mm…

Dell docking station WD15 mount under table

Special thanks for CWempe for modelling the docking station itself. Link to their version of the bracket Under table cradle for Dell WD15 docking station - we needed a way to stick it near the cable opening in the meeting room so that the…

BloodHound (SpecterOps)

This is a very large (552.83 x 417.99 x 25.4mm) sculpture of the BloodHoundAD logo. It was originally made as wall decor for the SpecterOps offices. Now you can make your own! The BloodHound.stl file is the complete model. You scale it…

Isocahedric Sundial - Parametric Latitudes

This kind of spherical sundial is called a “scaphé”. It is a very precise sundial that can be used to determine date and hour. Choose the sundial adapted to your latitude : 54° : Leeds (GB) - Hamburg (DE) - Minsk (BY) - Edmonton (CA) 51°…

Thundarr The Barbarian

Thundarr The Barbarian

SKADIS BERNINA bobbin and thread spool holder - Faden und Näh-Spule

Zweiteiliger Druck! Gemacht für verschiedene Fadenspulen Grössen und speziell für BERNINA Nähmaschinenspulen . Die zwei Teile können einfach mit z. B. Sekundenkleber zusammen geklebt werden. Die beiden oberen Teile sind unterschiedlich…

Ablage für Pfannenwender und Löffel

Ablage für Pfannenwender und Löffel mit praktischer Auffangschale für Tropfen. In PETG gedruckt auch spülmaschinenfest. ---- en ---- Holder for spatula and spoon with practical drip tray. Printed in PETG also dishwasher safe.

Zigarettenspitze / cigarette holder, Mundstück

Lesen Sie im Internet über die Vorteile einer Zigarettenspitze. Diese hat keinen zusätzlichen Filter, daher ist das Modell auf alle Bedürfnisse skalierbar. Die Druckkosten sind nur wenige Cent. Diese Zigarettenspitze ist speziell für die…

Holders for round rods (on which spools or anything else, can be placed/hanged)

Info: These holders contain of left, middle (optional) and right part . The system is adjusted for my solution, where I needed to hang it over my other construction (see photo) Middle part is universal (but i did not used it) Dimensions:…

Thunderdome

Le fichier est une représentation en trois dimensions du célèbre logo de l'événement musical Thunderdome. Ce logo est généralement caractérisé par un éclair surplombant le mot "Thunderdome", stylisé avec une police de caractères…

Intel NUC Wallmount/Under Desk Full Harness Version

A variation or original minimal design.

Pressure Advance Linien 0.6 Nozzel MK3.5 und Input Shaper Test

Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…

Houndstooth Container

I designed this cup with a houndstooth pattern for a friend, but I love it so much I am printing in different sizes for around the house. It can hold pens, dog bones, and really whatever you wish. It’s a cup. The design prints with no…

Dachshund-Cappuccino-Stencil

From JPG to SVG to STL nice coffee-stencil. Print instructions Just scale it in any size and print!

Bottle Cap (wasp and bee protection) / Flaschendeckel (Wespen- und Bienenschutz)

English: A flower bottle cap to protect your lemonade, beer or any other drink against curious insects. It is especially useful in the summer against insects crawling into the bottle. The cap effectively protects you from bee or wasp…

Pferd Herz und Name "Lea" - Geschenk

Einfach skalierbar

Santa Claus in a sleigh and reindeer (Weihnachtsmann im Schlitten und Rentier)

Das Modell passt auf den Prusa i3 MK3S. Druck: 0,2 mm Düse: 0,4 mm Unterstützung: Nicht erforderlich Rand: Nicht erforderlich Farbwechsel: nach 1,0 mm und 1,4 mm

Cotton Round Holder 1-9-22

Just a place to store cotton rounds to wipe build plate with alcohol. Rounds are usually found in makeup section or online. Measured at 56mm Diameter. I designed on fusion 360.

Pixel Watch 2 & 3 Charging Stand - Hanging Around

This is another Pixel Watch holder that allows you to charge your watch upright, with the bezel facing left or right. I wanted to design something that was sturdier than the cliffhanger, but still had a bit of flow to it. Update 2/9/25: I…

Modern tealight holder small and large - Moderner Teelicht Halter klein und gross

max 39mm / 59mm tealights Minimal filament consumption thanks to compact design Minimaler Filamentverbrauch durch kompaktes Design See also my egg cups in similar design Eierbecher in ähnlichem Design…