767 modeli
This is a custom-designed picture frame, available in several sizes and configurations. Each side piece prints individually and connector pieces hold it all together. There are several variations of the connectors depending on how tight…
Wydruk około 0,94 €–1,15 € nettoWstępna wycena jednego wariantu
I was fed up with the Velcro-mounted window seals made of fabric. Firstly, the Velcro gets loose when the window heats up in the sun, and secondly, it wasn’t easy to mount and was never securely mounted. I use a portable air conditioner…
Wydruk około 0,42 €–0,52 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The angled mount hole centres suit a Ring doorbell generation 2 model with holes centres of 44mm (width) by 87mm (length). 2.0mm mounting hole may need opening up to suit non-OE screws Recommended lay height of 0.2mm (Speed) and 100%…
Wydruk około 3,28 €–4,01 € nettoWstępna wycena jednego wariantu
3D-printed wall-mounted holder with a two-part design. The holder consists of a U-shaped base that is attached to the wall and a insertable component with two holes for screws or bolts. The insert pieces are made to slide into the base…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is my design of a functional, robust and reliable door or drawer handle. I created it especially for the FFF process to be printed using PLA, PETG or ASA. The handle is mounted from the front, using two countersink screws. This keeps…
Wydruk około 5,04 €–6,15 € nettoWstępna wycena jednego wariantu
Try split model and set higher infill in the "body" Gcodes in multicolor (base + body)
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Carabiner mug with various images Nice little 300 ml mug that you can attach to the outside of your backpack with the carabiner. Note: Only use food-safe plastics Clean and disinfect thoroughly before use Model printed with: Prusament…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A collection of Headless Slotted screws according to ISO 724 , ranging in sizes from M2 to M12, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75 mm, 80…
Wydruk około 0,03 €–0,04 € nettoWstępna wycena jednego wariantu
This is a decorative pipe flange (escutcheon plate) that fits around a water or drain pipe and conceals the larger diameter hole it goes into. It prints in two parts that fit together for a clean look. Note that the connection is not…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
A rose for every woman in the world! I printed in PLA Infill: 15% Layer Height: 0.20mm Supports: No Ironing: Topmost surface only Languages available: Portuguese, Czech, Spanish, English, Dutch, Deutsch, Italian, Romanian, French, Dansk…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena jednego wariantu
⭐ Hit Like and stash it in your collection – your future self will thank you! ❤ A collection of Headless Torx screws according to ISO 724 , ranging in sizes from M3 to M16, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
This is a funny Halloween-themed version of the popular motivational phrase “Live, Laugh, Love” that is commonly found as signs and such in home decor – put those away and make these “LIVED LAUGHED LOVED” gravestones for Halloween!…
Wydruk około 2,06 €–2,52 € nettoWstępna wycena jednego wariantu
Remix of the MMU3-Holder to hang in in various angles
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
Residents of Hawaii use the Shaka to convey the "Aloha Spirit", a concept of friendship, understanding, compassion, and solidarity among the various ethnic cultures that reside in Hawaii, lacking a direct semantic to literal translation.…
Wydruk około 31,35 €–38,32 € nettoWstępna wycena jednego wariantu
Hey everyone, i designed a wallmount for my Einhell powertools and thought i'd share with you. You will need something with a 20mm diameter and appropriate length to fit everything you want on it. I've used a aluminium pipe from the…
Wydruk około 2,58 €–3,15 € nettoWstępna wycena jednego wariantu
The plastic covers in the engine bay contain a dozen or so retainer clips that tend to fly out and get lost when the cover is removed. This part is a replacement for the retainer. Must be printed in the orientation modeled - if printed…
Wydruk około 0,20 €–0,24 € nettoWstępna wycena dla PETGMateriał u źródła: PET
These 16 corner templates are an extension to the LR2180 basic rounded corner set you can find here: Corner Templates for Flush-Trim Bits . I call them “leaf” shaped corners, see the drawing of how these corners are constructed. All the…
Wydruk około 3,32 €–4,06 € nettoWstępna wycena jednego wariantu
The flathead and PZ/PH holders are optimized for Wera srewdrivers, but will fit other brands. The large holder was printed with a 0,8mm nozzle, to get this out quicker. This was to big for writing this size markings. Unfortunately this…
Wydruk około 4,62 €–5,65 € nettoWstępna wycena jednego wariantu
This bumper was designed specifically for the 80x38x160cm Ikea JONAXEL shelving unit in order to prohibit our resident Vacuum Robot climbing through the feet ( which it can, but not very graciously ). It'll likely work with all other…
Wydruk około 2,56 €–3,13 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My daughter likes threaded bottle caps and other threaded things, so I made her a few threaded shapes.
Wydruk około 10,17 €–12,43 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Molds to make training models of following items: Health Post Health Center Hospital Temporary structure Office Tent Car Manufacturing instructions: Material: PLA 3D Printer: FDM 3D printer, average print time 16 hours. (with MK4 input…
Wydruk około 10,27 €–12,55 € nettoWstępna wycena jednego wariantu
Various components for Mechatronics Electropneumatics Testing Boards These components were helpful to use with various manufacturers pneumatic components such as actuators, valves or other components with a preparation for ELM.03 ELM.06…
Wydruk około 1,43 €–1,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Made this as I am digging on making royal icing decorated sugar cookies. The stamp aspect can be used as a template for designing or on a plain cookie for decorating (embossing). Can be used on raw or cooked (but still hot) cookie.
Wydruk około 0,74 €–0,91 € nettoWstępna wycena jednego wariantu
Many different sized funnels. With the top diameter starting at 25mm and going up to 200mm. Each with multiple appropriately sized bottom/nozzle sizes. The models are grouped by the top diameter size. If any of these don't suit you you…
Thanks to https://www.thingiverse.com/STTrife for posting this, i wanted some variations that were larger and fit the existing locking locations. These are printed and can be stacked with existing storage boxes. See his excellent write-up…
Inspired by sns13s toothpaste tube squeezer on Thingiverse, I created my own version of a tube sqeezer which is more sturdy and easy printable. I liked the exlicit lock of sns13s design (much better and more reliable than printed ratchet…
UPDATE 05/03/22: I got the filenames confused. Now they are all right added 1x2; 5x2; 6x2 ________________________________________________________________________________________________________________ I wanted to make my own Cable…
Introduction I'm sure everybody has seen the beautiful 30th anniversary PS5 Pro release . The USB-C cable housing they included for the cable was a very cool design, so I thought maybe us existing PS5 owners can also share some of that…
A small cylindrical container with a lid that screws inside the top. A generic small container for a travel essentials contest seemed a bit of a stretch, but I actually did take one or two similar containers on my last few vacations for…
Set of 5 different style Shelves for Honeycomb Storage wall. Shelves are 100-120mm wide and 50-60mm deep. Made specially for HSW or Honeycomb Storage wall with Hex wall fixings. Depending on Your printer it is possible that a very little…
Recently I needed a wooden dowel in a pinch and couldn't find the exact size I needed so I've designed my own. I also looked through multiple IKEA spares website and designed what I thought would be suitable to be 3D printable. Testing…
Here is a small collection of thread protectors threaded 1/2-28 in multiple diameters and lengths. No post processing necessary, if your printer is calibrated and tuned well then these should thread on like butter. If they are a tight fit…
Update 2023-12-28: I made a variant with a date tag which you can find here . ------------------------------------------------------------- I know there are a lot of nice bag clips here already, but I wasn't entirely happy with any of…
When I didn't find hooks in sizes I needed I created a set of hooks in the following sizes: 20, 25, 30, 35, 40, 45, 50, 55, 60, 65, 70, 75, 80, 85, 90, 95 and 100mm. The hooks are click hooks. Recommended print settings (same as…
For a lot of helpful details/info please consult the main Teaching Tech listing here: https://www.printables.com/model/864950-open-source-spacemouse-space-mushroom-remix This final assembly video explains all about my remixes in this set:…
Multiboard bottle holders with open bottom in sizes from 25mm to 120mm. The bottle holders uses the flexible MultiConnect connector. Just attach MultiConnect connectors to your board and then mount the bottle holder on these connection…
Qidi Plus 4 Rear Cover with the choice of different fan sizes in 60mm, 80mm, 92mm, 120mm Printer settings with ASA are with my printer. Your settings may differ from these. Material ASA (Qidi) HotEnd Nozzel Temp: 270°C Bed Temp: 105°C…
A collection of mounts for various Aqara sensors. Will grow as I get more stuff. Prints solid, no supports, large surface down (lock ring upside down). Can barely see them if printed in white. Mounts will work with or without tape…
Some basic gemstone shapes, modeled to replace the stock tokens in the game Splendor. Highly recommend printing or at least painting in the corresponding colors!
Here are some ammunition models of various caliber. They're good for props or demonstration purposes. Here are the calibers that I currently have: -.22 LR -7.62x25mm Tokarev -.32 ACP (.32 Auto) -.380 ACP (.380 Auto, 9mm Short) -9mm Para…
Inner plant pots in various dimensions: easy to print and no support needed The pot in the pictures is d95-D140-H115 and is printed in PLA. If you need other dimensions you can scale the model or feel free to leave a commment - there will…
remixed from https://www.thingiverse.com/thing:682146 Beefier and with a longer handle than the default settings. 0.5 Tablespoon 1 Tablespoon 1.5 Tablespoon 2 Tablespoon 3 Tablespoon I printed a couple of them and like how they came out.…
This is my design of fully functional washers with built-in structural support. I created them for the FFF process to be printed using PETG or ASA material. Printed with the correct settings and materials, these washers are quite strong…
This is a spacer to be used with the Gravitrax marble run system. It has been designed so that no support is needed. Various sizes have been provided for your convenience.
****FINALLY UPDATED to address lame design flaws**** Added threaded couplers to attach the post and post extension together and the post or extension to the top. If the coupler is too big on your print, scale it down a little in x and y.…
This improved sewing gauge now allows to print thimble actually fitting your finger (measure the width of your thumb) There is closed model for protection from needle, as well as open for long fingernails. Thimble is then press fitted…
Description This collection of print-in-place hinges is designed with versatility in mind, featuring a range of lengths and widths to fit different project needs. Each hinge prints fully assembled, no extra hardware or support needed –…
There are 2 more topspins 1)Patternspiner 2)Proppellespiner first pack lay there: https://www.prusaprinters.org/prints/28045-various-spin-tops Print instructions Every spin top can be printed without support if you have enough cooling. 3…
This is a design that allows you to create a customized Perler (aka Hama / melty beads) bead base in Fusion 360. I originally designed this in OpenSCAD but found that it took way too long to render. Fusion 360 allows you to have a…
Simple / minimal multiboard tool holders in various sizes. Width 10 - 75 mm Depth 10 - 25 mm Use the parametric Autodesk Fusion fusion model for other sizes. Requires one of the Multiboard Snaps to click into. Recommended print settings…
Like the original supplied, my model has an end-stop in the flange to prevent it from falling off due to turning too far. I have completely redesigned this holder, which has allowed me to create different lengths and refine the mesh…
IKEA Skådis bottle holders in sizes from 15mm to 120mm. The bottle holders uses the flexible and strong Skadis generic connector . Just attach a Skadis generic connector to your Skådis board and then mount the bottle holder on the…
Some more awesome models from DrMcKay, Cheers Jace As a request I have mad a solid version of the T21 for Legion scale although I dont know what size that is hopefully it will print ok, CHeers Jace
Many different sized funnels with off center spouts. This allows access in to areas that might otherwise be difficult to access. With the top diameter starting at 25mm and going up to 200mm. Each with multiple appropriately sized…
<<<text and pictures are not mine but reuploaded along with original model and licence, my own comment and pictures will be in the “make” section>>> Summary Various lego compatible train track crossing , buffers and other bits Stuff iI've…
Currently the following sizes are available (notes size / max. block height): 90x90 mm / 95 mm 90x90 mm / 45 mm 85x85 mm / 45 mm 83x83 mm / 80 mm 83x83 mm / 45 mm Contact me in the comments section if you need a different size. Printing…
I've been using these in my 3d model train work, I've been designing and working on a small model train layout that will be primarily 3d designed and printed right down to the track.
I've made 4 versions of the camera body cap depending on what you'd like. one that keeps the locking pin in place and one that doesn't, and then each of those two options with or without the Pentax logo on it. I've printed the logo +…
This is a set of linkable drawers for holding gridfinity bins. There are three pieces: the drawer itself with the built-in baseplate, the outer shell, and (optionally) the connectors to hold multiple shells together. The connectors slide…
I created a small disposal box with various diameters and container heights with this design. The lid with the hinge is printed in place and screwed onto the container. There are no supports required for this print, and I recommend…
Gardena pool filling adapters in various sizes; sizes 20-100mm have been prepared for download. The download model has the respective width included at the end of its name. Easy to print due to the raised surface area relative to the…
Designed these for a trip to Galaxy's Edge. They're not the most accurate, but they printed fast and looked pretty good walking around the park. One of my biggest pet peeves with greebles are so many are designed to attach and look like…
Simple shower head in various sizes and spray intensities Here I've developed a simple and inexpensive shower head. Please print with at least five wall lines to ensure it's watertight. If necessary, apply a layer of clear varnish to the…
Replacement socker/switch plate for Gira System 55. All my original frames, plates and power outlets (white) are breaking after 15 years, so i decided to CAD and print them, adding some design improvements compared to the original. Print…
Cord Wrapper, Flat or Curved Surfaces, Variable Diameters 4-14 in (100-356 mm). Secures flat or round cord (.25 in/6.3 mm diameter or 5/16 in/7.2 mm). If this isn’t exactly what you’re looking for, check out my other design here that…
A print-in-place crate/box in a heavy/industrial/armored/SciFi design. I usually tend to minimalistic and vase mode designs, but I wanted to do something bigger this time. This is also a design with a more restrictive license than I…
10cm Coffee stencils with a rim to avoid spilling of cacao. Very nice motives by Stasiek! Note: If you like the shape, I have created more stencils over time with the same size and shape.
Since I'm back to owning a Glock Pistol, I thought it was about time to rework my original Glock gun stand and bring it to 2025. I made this stand for the purpose of being able to store my gun in my bedroom gun safe or on your night stand…
I've designed a collection of simple, round plant saucers to complement your gardening needs, focusing on both aesthetic and functional versatility. Each saucer features a unique rim profile, allowing you to match it seamlessly with…
Gardena pool filling adapters in various sizes; sizes 20-100mm have been prepared for download. The download model has the respective width included at the end of its name. Easy to print due to the raised surface area relative to the…
Update: Ich habe dieses case komplett neu entworfen, um ein paar Altlasten und störende Kleinigkeiten loszuwerden. Die Knöpfe sind nun komplett ausgeschnitten (um nicht mehr versehentlich betätigt zu werden), das Display ist komplett…
Eppendorf Tube Rack with Spring Mechanism Available sizes 2x16, 4x16, 6x16, 8x16 3x8, 4x8 3x6 Description Tube rack designed to hold your Eppis tightly with springs. I find this useful for storage of large collections of tubes, to avoid…
Original unit hose adapter broke, this is just a replacement with 3D Printing in mind. Has pretty tight tolerances so make sure your horizontal expansion and all that is properly tuned. Print in a material thats not PLA as it might deform…
T-BOXX compatible inserts, that are optimised for 3D printing (consistent wall thickness). The pegs should be printed extra and glued in with some superglue. The grid spacing is 52.3mm.
Incluye modelos de: -Feliz Aniversario (Happy Anniversary) -Feliz Cumpleaños (Happy Birthday) -Mi Bautizo (My baptism) -Mi Primera Comunión (My First Communion) -Mis Quince (My Fifteen - 15) Todos en archivos individuales
Decorative Mushroom Collection V2 – Various Sizes & Shapes This decorative mushroom collection features multiple mushroom designs in a variety of sizes and shapes. Their clean, organic appearance makes them perfect for decorating shelves,…
He diseñado unos cuantos modelos de recogecables para que imprimáis el que más os guste. I have designed a few models of cable ties so you can print the one you like the most.
Contributo ai vari sistemi fanduct VzBot in abbinamento con i sistemi Klicky Probedi Jlas1 e Quickdraw di Annex effettuando delle modifiche in modo che i due sistemi si fondono in un unico componente. I sistemi sono stati testati su…
There are a wide variety of miniature cacti, many with different features. We have the traditional candelabra (tree) cactus with various number of arms. Then there is the ball cactus and pear cactus plants. Not to be outdone by the barrel…
Introducing a traditionally designed large flower pot complemented by a matching saucer, this creation is a blend of classic aesthetics and practicality. The pot, characterized by an octagonal shape with softly rounded corners, boasts a…
I guess Govee doesn't want to sell accessories separately, so I've modelled both style of brackets that originally came with the light bar. Mount Govee light bars to clamp style monitor stands. I use the light bars as desk lamps, so the…
A set of Brio/Ikea traintracks to Duplo connectors. Various types (compact, large, with hole). Material: PLA+ Resolution: 0.4mm Supports: No Rafts: No
These are 40x40mm, 40x20mm and 20x20mm V-Slot Linear Rails. I am working on a project to make a perfect scale model of my Ender 3 Pro, I figured this might be a useful model unto itself. Each rail is uploaded in the following lengths:…
various horns with texture for cosplay, costume, halloween etc.
Some adapters for standard 38mm vacuum hose. All of them screw onto the hose itself, using the spral shape as thread.
Collection of a multitude of different base sizes. All bases are compatible with various tabletop systems. Are the same size as all Games Workshop bases and indistinguishable from them. All bases come with or without predefined magnet…
Wanted a Spacer for the X52 that did not touch the inner spring of my X52 Pro. Blechimmers version was the only one that did that for me, but it was a bit soft so I remade it in a few different sizes: 0.5mm 1.0mm(same as Blecheimers)…
A collection of Headless Hex screws according to ISO 4026 (DIN 913), ranging in sizes from M2 to M20, each available in lengths of 5 mm, 10 mm, 15 mm, 16 mm, 20 mm, 25 mm, 30 mm, 35 mm, 40 mm, 45 mm, 50 mm, 55 mm, 60 mm, 65 mm, 70 mm, 75…
I'm thrilled to present my latest design, a round flower pot that elegantly showcases a captivating spiral pattern swirling around its sides. It's not just an ordinary pot; it's a statement piece that combines aesthetic appeal with…
These are meant to put on the oem rubber feet. not to replace them. If u use the Ender 3 V2 Silent Pack then these (basic_Mobo_PSU_cover_30cm_V1.stl) feet, with this cut out at one of the edges, could be Helpful for you. update updated…
You will find different versions in different heights. I have only printed the 6U versions. If you have wishes for other versions, write me a PM or a comment.
Print 1x handle and 1x shaft, with length of your choice, and glue them in place. Print shaft with a relatively stiff material. PLA, PLA+, PLA-CF, PETG-CF and PC-CF. Do not use PETG, ABS, ASA, and Nylon, they either fail to maintain…
Secure-Snap Cardboard Spool Ring for QIDI Box - various diameters 3mf is the QIDI Studio Project for ASA (smooth plate) The Problem If you use cardboard spools in the new QIDI Box, you know the struggle: most adapter rings rely on a…
Here are some furniture sliders round and square 1.5", 2", and 3". The 3" is a little heavier duty. You can scale them to make them work best for your application. I made the 1.5" square ones to protect my floors with metal shelving…
Most of the pliers holder are design to lay the pliers flat on the Ikea Skadis Pegboard, and that's not the best pickup and you waste a lot of space. Other pliers stand are mostly a shelf to hold a bunch of pliers on a row, and maybe you…
I'm thrilled to introduce my latest design: a Round Flower Pot adorned with an aligned scale-like pattern on its sides, capturing the essence of elegance and practicality. The pot's sides are tilted at a subtle 6º angle. Its wide, flat…
I have bought a couple of sonoff zigbee sensor (SONOFF SNZB-02) after some aqara sensor start failing, but differently from the latest they use the CR2450 batteries instead of the more common CR2032 I search printables and thangs for a…
INTRODUCTION We have created various FT EMS frames for people to fit with any projects they are working on. These follow the standards used for EMS which means that all of the mounts that are located in the Mounts Repository will work.…
Overview: I made this to store my old Intel desktop CPUs after a model I found didn't have quite enough space for the small “nubs” on the back of some of them. This model uses a more open design that allows for some variation in…
Contains files for: - Single Zippo - Dual Zippos - Single Bic - Zippo and Bic Survival Kit Collection: https://www.printables.com/social/240789-stevew91/collections/296699
